Movies skip in drive/like stop-and-go motion; transcoded FFmpeg do same!?
Hi folks. I have been ripping some DVDs as of late and I am in the midst of transfering them to Apple TV on my network. However I seem to have run into a problem.
Today I went to rip a DVD and then loaded into iTunes and trans to Apple TV. I was noticing that it was skipping a bit on my TV - not smooth playing in other words.
So I went back to my Macbook and started playing a disk in the Macbook DVD player and notices that when I play the movie stops and goes. Will play a second or two then stop then play then stop, almost like arecord skipping without missing any music. The drive seems to be a little noisier now too - making churning or turning noise as it reads and plays (skips).
What could this be from? This wasnt happening yesterday - I was able to rip a couple that didnt have this problem. Is the superdrive bad now? is it a software issue? Do I need ot reset PRAM?
Come to think of it I also was using FFMpeg to transcode some .avi movies into Apple TV compatible files and they didnt come out very well either, had to trash them. Since this is software based and not drive based, coul dmy issue be some setting or PRAM on Macbook itself rather than the drive?
OK I'm confused now!
Your help would be greatly appreciated!! as always...
Jason
So I dloaded VLC to play the movies before I rip them and I am getting the following errors for 2 different movies:
main: decoder is leaking pictures, resetting the heap
and
main: INPUTCONTROL_SET_POSITION(OFFSET) 11.2% failed
What do you think? Since I am not versed in this very wekk, is this a hardware or software issue? And how to remedy?
Thanks
Jason
Similar Messages
-
Acrobat causes Nvidia driver to stop and recover
I accidentally started this in the Photoshop forum in an nvidia thread - I was told to move it, so here I am. Apologies.
I am running an EVGA nVidia GeForce 7200GS 512 MB VGA/DVI/TV-out PCI-Express Video Card (model# 512-P2-N430-LR).
Windows 7 (32bit), 2X2.6ghz, 4gb ram, dual monitors.
I'm running Adobe Acrobat 9.0.0 Pro, as a part of Web Premium CS4.
When I run Adobe Acrobat, I see the driver fail and recover - 11 times in the last 30 days. It's often when I'm using Acrobat in a pretty heavy handed manner, like opening 3 large documents at once (but not always that heavy). I updated my driver on June 6th and it still happens.
Event viewer details are:
Log Name: System
Source: Display
Date: 6/23/2010 12:33:49 PM
Event ID: 4101
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer:
Description:
Display driver nvlddmkm stopped responding and has successfully recovered.
I'm installing roughly 1GB of updates for CS4 right now, so hopefully the issue will stop.
I realize this is a video card issue, since it is stopping, but I also realize this is a video card stopping only with the help of Acrobat. Photoshop, Dreamweaver, Fireworks and Flash all have had no trouble from what I can recall.
I have posted a similar issue at the nvidia website, but they have a horrible website and I can't even tell if they support the 7200.
Thanks so much for any help in finding a solution.
Joby9.3.3 apparently fixed it. I haven't had it happen since I updated and the usual reproduction doesn't stop the driver.
Thanks for the help!!! -
Graphics driver has stopped and recovered
While playing Max Payne 3, Bf3, Far Cry 3 and War Thunder I encounter crashes (After around 40-60 min) with the "Display driver stopped responding and has recovered" message. I have been monitoring the temps of my motherboard, gpu and cpu and none are exceeding excessive temperatures. My GPU temps maxes out at 75 c under full load 60 min ingame.
It only seems to crash when playing DX10/1X games. Been palying Arma 2 for hours and hours online and never had any problems. Same with source games.
Now the strange strange part. When I play the games in Windowed mode I never encounter these problems.
Anyone had this fixed?
Attached specs:
Summary
Operating System
Microsoft Windows 7 Home Premium 64-bit SP1
CPU
Intel Core i7 2600 @ 3.40GHz 41 °C
Sandy Bridge 32nm Technology
RAM
8,00 GB Dual-Channel DDR3 @ 661MHz (9-9-9-24)
Motherboard
ASUSTeK COMPUTER INC. P8H67-I DELUXE (LGA1155) 45 °C
Graphics
2243W (1920x1080@60Hz)
1279MB GeForce GTX 570 (MSI) 54 °C
Hard Drives
466GB SAMSUNG HD502HJ ATA Device (SATA) 38 °C
Optical Drives
TSSTcorp CDDVDW SH-222AB ATA Device
Audio
Realtek High Definition Audio
CPU
Intel Core i7 2600
Cores 4
Threads 8
Name Intel Core i7 2600
Code Name Sandy Bridge
Package Socket 1155 LGA
Technology 32nm
Specification Intel Core i7-2600 CPU @ 3.40GHz
Family 6
Extended Family 6
Model A
Extended Model 2A
Stepping 7
Revision D2
Instructions MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, Intel 64
Virtualization Supported, Enabled
Hyperthreading Supported, Enabled
Fan Speed 1505 RPM
Bus Speed 99,8 MHz
Stock Core Speed 3400 MHz
Stock Bus Speed 100 MHz
Average Temperature 41 °C
Caches
L1 Data Cache Size 4 x 32 KBytes
L1 Instructions Cache Size 4 x 32 KBytes
L2 Unified Cache Size 4 x 256 KBytes
L3 Unified Cache Size 8192 KBytes
Core 0
Core Speed 2394,4 MHz
Multiplier x 24,0
Bus Speed 99,8 MHz
Temperature 44 °C
Thread 1
APIC ID 0
Thread 2
APIC ID 1
Core 1
Core Speed 2394,4 MHz
Multiplier x 24,0
Bus Speed 99,8 MHz
Temperature 42 °C
Thread 1
APIC ID 2
Thread 2
APIC ID 3
Core 2
Core Speed 2394,4 MHz
Multiplier x 24,0
Bus Speed 99,8 MHz
Temperature 40 °C
Thread 1
APIC ID 4
Thread 2
APIC ID 5
Core 3
Core Speed 1596,2 MHz
Multiplier x 16,0
Bus Speed 99,8 MHz
Temperature 38 °C
Thread 1
APIC ID 6
Thread 2
APIC ID 7
RAM
Memory slots
Total memory slots 2
Used memory slots 2
Free memory slots 0
Memory
Type DDR3
Size 8192 MBytes
Channels # Dual
DRAM Frequency 665,1 MHz
CAS# Latency (CL) 9 clocks
RAS# to CAS# Delay (tRCD) 9 clocks
RAS# Precharge (tRP) 9 clocks
Cycle Time (tRAS) 24 clocks
Command Rate (CR) 1T
Physical Memory
Memory Usage 33 %
Total Physical 7,98 GB
Available Physical 5,32 GB
Total Virtual 16 GB
Available Virtual 13 GB
SPD
Number Of SPD Modules 2
Slot #1
Type DDR3
Size 4096 MBytes
Manufacturer Kingston
Max Bandwidth PC3-10700 (667 MHz)
Part Number 9905428-043.A01G
Serial Number 703AAE68
Week/year 26 / 11
SPD Ext. EPP
JEDEC #5
Frequency 685,7 MHz
CAS# Latency 9,0
RAS# To CAS# 9
RAS# Precharge 9
tRAS 25
tRC 34
Voltage 1,500 V
JEDEC #4
Frequency 609,5 MHz
CAS# Latency 8,0
RAS# To CAS# 8
RAS# Precharge 8
tRAS 22
tRC 30
Voltage 1,500 V
JEDEC #3
Frequency 533,3 MHz
CAS# Latency 7,0
RAS# To CAS# 7
RAS# Precharge 7
tRAS 20
tRC 27
Voltage 1,500 V
JEDEC #2
Frequency 457,1 MHz
CAS# Latency 6,0
RAS# To CAS# 6
RAS# Precharge 6
tRAS 17
tRC 23
Voltage 1,500 V
JEDEC #1
Frequency 381,0 MHz
CAS# Latency 5,0
RAS# To CAS# 5
RAS# Precharge 5
tRAS 14
tRC 19
Voltage 1,500 V
Slot #2
Type DDR3
Size 4096 MBytes
Manufacturer Kingston
Max Bandwidth PC3-10700 (667 MHz)
Part Number 9905428-043.A01G
Serial Number 533A1737
Week/year 26 / 11
SPD Ext. EPP
JEDEC #5
Frequency 685,7 MHz
CAS# Latency 9,0
RAS# To CAS# 9
RAS# Precharge 9
tRAS 25
tRC 34
Voltage 1,500 V
JEDEC #4
Frequency 609,5 MHz
CAS# Latency 8,0
RAS# To CAS# 8
RAS# Precharge 8
tRAS 22
tRC 30
Voltage 1,500 V
JEDEC #3
Frequency 533,3 MHz
CAS# Latency 7,0
RAS# To CAS# 7
RAS# Precharge 7
tRAS 20
tRC 27
Voltage 1,500 V
JEDEC #2
Frequency 457,1 MHz
CAS# Latency 6,0
RAS# To CAS# 6
RAS# Precharge 6
tRAS 17
tRC 23
Voltage 1,500 V
JEDEC #1
Frequency 381,0 MHz
CAS# Latency 5,0
RAS# To CAS# 5
RAS# Precharge 5
tRAS 14
tRC 19
Voltage 1,500 V
Motherboard
Manufacturer ASUSTeK COMPUTER INC.
Model P8H67-I DELUXE (LGA1155)
Chipset Vendor Intel
Chipset Model Sandy Bridge
Chipset Revision 09
Southbridge Vendor Intel
Southbridge Model H67
Southbridge Revision B3
System Temperature 45 °C
BIOS
Brand American Megatrends Inc.
Version 0606
Date 21-11-2011
Voltage
CPU CORE 0,968 V
MEMORY CONTROLLER 1,000 V
AVCC 3,296 V
3VCC 3,280 V
VIN4 1,000 V
VIN6 0,344 V
PCI Data
Slot PCI-E
Slot Type PCI-E
Slot Usage In Use
Bus Width 32 bit
Slot Designation PCIEX16_1
Slot Number 0
Graphics
Monitor
Name 2243W on NVIDIA GeForce GTX 570
Current Resolution 1920x1080 pixels
Work Resolution 1920x1036 pixels
State enabled, primary
Monitor Width 1920
Monitor Height 1080
Monitor BPP 32 bits per pixel
Monitor Frequency 60 Hz
Device \\.\DISPLAY1\Monitor0
GeForce GTX 570
GPU GF110
Device ID 10DE-1086
Revision A2
Subvendor MSI (1462)
Series GeForce GTX 500
Current Performance Level Level 3
Current GPU Clock 770 MHz
Current Memory Clock 2000 MHz
Current Shader Clock 1540 MHz
Voltage 0,950 V
Technology 41 nm
Die Size 520 mm²
Release Date Dec 07, 2010
DirectX Support 11.0
OpenGL Support 5.0
Bus Interface PCI Express x16
Temperature 54 °C
Driver version 9.18.13.1061
BIOS Version 70.10.27.00.01
ROPs 40
Shaders 512 unified
Memory Type GDDR5
Physical Memory 1279 MB
Virtual Memory 1024 MB
Bus Width 64x5 (320 bit)
Filtering Modes 16x Anisotropic
Noise Level Moderate
Max Power Draw 219 Watts
Count of performance levels : 3
Level 1 - "Default"
GPU Clock 50 MHz
Memory Clock 135 MHz
Shader Clock 101 MHz
Level 2 - "2D Desktop"
GPU Clock 405 MHz
Memory Clock 324 MHz
Shader Clock 810 MHz
Level 3 - "3D Applications"
GPU Clock 770 MHz
Memory Clock 2000 MHz
Shader Clock 1540 MHz
OpenGL
Version 4.3.0
Vendor NVIDIA Corporation
Renderer GeForce GTX 570/PCIe/SSE2
GLU Version 1.2.2.0 Microsoft Corporation
Values
GL_MAX_LIGHTS 8
GL_MAX_TEXTURE_SIZE 16384
GL_MAX_TEXTURE_STACK_DEPTH 10
GL Extensions
GL_AMD_multi_draw_indirect
GL_ARB_arrays_of_arrays
GL_ARB_base_instance
GL_ARB_blend_func_extended
GL_ARB_clear_buffer_object
GL_ARB_color_buffer_float
GL_ARB_compatibility
GL_ARB_compressed_texture_pixel_storage
GL_ARB_conservative_depth
GL_ARB_compute_shader
GL_ARB_copy_buffer
GL_ARB_copy_image
GL_ARB_debug_output
GL_ARB_depth_buffer_float
GL_ARB_depth_clamp
GL_ARB_depth_texture
GL_ARB_draw_buffers
GL_ARB_draw_buffers_blend
GL_ARB_draw_indirect
GL_ARB_draw_elements_base_vertex
GL_ARB_draw_instanced
GL_ARB_ES2_compatibility
GL_ARB_ES3_compatibility
GL_ARB_explicit_attrib_location
GL_ARB_explicit_uniform_location
GL_ARB_fragment_coord_conventions
GL_ARB_fragment_layer_viewport
GL_ARB_fragment_program
GL_ARB_fragment_program_shadow
GL_ARB_fragment_shader
GL_ARB_framebuffer_no_attachments
GL_ARB_framebuffer_object
GL_ARB_framebuffer_sRGB
GL_ARB_geometry_shader4
GL_ARB_get_program_binary
GL_ARB_gpu_shader5
GL_ARB_gpu_shader_fp64
GL_ARB_half_float_pixel
GL_ARB_half_float_vertex
GL_ARB_imaging
GL_ARB_instanced_arrays
GL_ARB_internalformat_query
GL_ARB_internalformat_query2
GL_ARB_invalidate_subdata
GL_ARB_map_buffer_alignment
GL_ARB_map_buffer_range
GL_ARB_multi_draw_indirect
GL_ARB_multisample
GL_ARB_multitexture
GL_ARB_occlusion_query
GL_ARB_occlusion_query2
GL_ARB_pixel_buffer_object
GL_ARB_point_parameters
GL_ARB_point_sprite
GL_ARB_program_interface_query
GL_ARB_provoking_vertex
GL_ARB_robust_buffer_access_behavior
GL_ARB_robustness
GL_ARB_sample_shading
GL_ARB_sampler_objects
GL_ARB_seamless_cube_map
GL_ARB_separate_shader_objects
GL_ARB_shader_atomic_counters
GL_ARB_shader_bit_encoding
GL_ARB_shader_image_load_store
GL_ARB_shader_image_size
GL_ARB_shader_objects
GL_ARB_shader_precision
GL_ARB_shader_storage_buffer_object
GL_ARB_shader_subroutine
GL_ARB_shader_texture_lod
GL_ARB_shading_language_100
GL_ARB_shading_language_420pack
GL_ARB_shading_language_include
GL_ARB_shading_language_packing
GL_ARB_shadow
GL_ARB_stencil_texturing
GL_ARB_sync
GL_ARB_tessellation_shader
GL_ARB_texture_border_clamp
GL_ARB_texture_buffer_object
GL_ARB_texture_buffer_object_rgb32
GL_ARB_texture_buffer_range
GL_ARB_texture_compression
GL_ARB_texture_compression_bptc
GL_ARB_texture_compression_rgtc
GL_ARB_texture_cube_map
GL_ARB_texture_cube_map_array
GL_ARB_texture_env_add
GL_ARB_texture_env_combine
GL_ARB_texture_env_crossbar
GL_ARB_texture_env_dot3
GL_ARB_texture_float
GL_ARB_texture_gather
GL_ARB_texture_mirrored_repeat
GL_ARB_texture_multisample
GL_ARB_texture_non_power_of_two
GL_ARB_texture_query_levels
GL_ARB_texture_query_lod
GL_ARB_texture_rectangle
GL_ARB_texture_rg
GL_ARB_texture_rgb10_a2ui
GL_ARB_texture_storage
GL_ARB_texture_storage_multisample
GL_ARB_texture_swizzle
GL_ARB_texture_view
GL_ARB_timer_query
GL_ARB_transform_feedback2
GL_ARB_transform_feedback3
GL_ARB_transform_feedback_instanced
GL_ARB_transpose_matrix
GL_ARB_uniform_buffer_object
GL_ARB_vertex_array_bgra
GL_ARB_vertex_array_object
GL_ARB_vertex_attrib_64bit
GL_ARB_vertex_attrib_binding
GL_ARB_vertex_buffer_object
GL_ARB_vertex_program
GL_ARB_vertex_shader
GL_ARB_vertex_type_2_10_10_10_rev
GL_ARB_viewport_array
GL_ARB_window_pos
GL_ATI_draw_buffers
GL_ATI_texture_float
GL_ATI_texture_mirror_once
GL_S3_s3tc
GL_EXT_texture_env_add
GL_EXT_abgr
GL_EXT_bgra
GL_EXT_bindable_uniform
GL_EXT_blend_color
GL_EXT_blend_equation_separate
GL_EXT_blend_func_separate
GL_EXT_blend_minmax
GL_EXT_blend_subtract
GL_EXT_compiled_vertex_array
GL_EXT_Cg_shader
GL_EXT_depth_bounds_test
GL_EXT_direct_state_access
GL_EXT_draw_buffers2
GL_EXT_draw_instanced
GL_EXT_draw_range_elements
GL_EXT_fog_coord
GL_EXT_framebuffer_blit
GL_EXT_framebuffer_multisample
GL_EXTX_framebuffer_mixed_formats
GL_EXT_framebuffer_multisample_blit_sca led
GL_EXT_framebuffer_object
GL_EXT_framebuffer_sRGB
GL_EXT_geometry_shader4
GL_EXT_gpu_program_parameters
GL_EXT_gpu_shader4
GL_EXT_multi_draw_arrays
GL_EXT_packed_depth_stencil
GL_EXT_packed_float
GL_EXT_packed_pixels
GL_EXT_pixel_buffer_object
GL_EXT_point_parameters
GL_EXT_provoking_vertex
GL_EXT_rescale_normal
GL_EXT_secondary_color
GL_EXT_separate_shader_objects
GL_EXT_separate_specular_color
GL_EXT_shader_image_load_store
GL_EXT_shadow_funcs
GL_EXT_stencil_two_side
GL_EXT_stencil_wrap
GL_EXT_texture3D
GL_EXT_texture_array
GL_EXT_texture_buffer_object
GL_EXT_texture_compression_dxt1
GL_EXT_texture_compression_latc
GL_EXT_texture_compression_rgtc
GL_EXT_texture_compression_s3tc
GL_EXT_texture_cube_map
GL_EXT_texture_edge_clamp
GL_EXT_texture_env_combine
GL_EXT_texture_env_dot3
GL_EXT_texture_filter_anisotropic
GL_EXT_texture_format_BGRA8888
GL_EXT_texture_integer
GL_EXT_texture_lod
GL_EXT_texture_lod_bias
GL_EXT_texture_mirror_clamp
GL_EXT_texture_object
GL_EXT_texture_shared_exponent
GL_EXT_texture_sRGB
GL_EXT_texture_sRGB_decode
GL_EXT_texture_storage
GL_EXT_texture_swizzle
GL_EXT_texture_type_2_10_10_10_REV
GL_EXT_timer_query
GL_EXT_transform_feedback2
GL_EXT_vertex_array
GL_EXT_vertex_array_bgra
GL_EXT_vertex_attrib_64bit
GL_EXT_import_sync_object
GL_IBM_rasterpos_clip
GL_IBM_texture_mirrored_repeat
GL_KHR_debug
GL_KTX_buffer_region
GL_NV_alpha_test
GL_NV_blend_minmax
GL_NV_blend_square
GL_NV_complex_primitives
GL_NV_compute_program5
GL_NV_conditional_render
GL_NV_copy_depth_to_color
GL_NV_copy_image
GL_NV_depth_buffer_float
GL_NV_depth_clamp
GL_NV_draw_texture
GL_NV_ES1_1_compatibility
GL_NV_explicit_multisample
GL_NV_fbo_color_attachments
GL_NV_fence
GL_NV_float_buffer
GL_NV_fog_distance
GL_NV_fragdepth
GL_NV_fragment_program
GL_NV_fragment_program_option
GL_NV_fragment_program2
GL_NV_framebuffer_multisample_coverage
GL_NV_geometry_shader4
GL_NV_gpu_program4
GL_NV_gpu_program4_1
GL_NV_gpu_program5
GL_NV_gpu_program_fp64
GL_NV_gpu_shader5
GL_NV_half_float
GL_NV_light_max_exponent
GL_NV_multisample_coverage
GL_NV_multisample_filter_hint
GL_NV_occlusion_query
GL_NV_packed_depth_stencil
GL_NV_parameter_buffer_object
GL_NV_parameter_buffer_object2
GL_NV_path_rendering
GL_NV_pixel_data_range
GL_NV_point_sprite
GL_NV_primitive_restart
GL_NV_register_combiners
GL_NV_register_combiners2
GL_NV_shader_atomic_counters
GL_NV_shader_atomic_float
GL_NV_shader_buffer_load
GL_NV_shader_storage_buffer_object
GL_NV_texgen_reflection
GL_NV_texture_barrier
GL_NV_texture_compression_vtc
GL_NV_texture_env_combine4
GL_NV_texture_expand_normal
GL_NV_texture_lod_clamp
GL_NV_texture_multisample
GL_NV_texture_rectangle
GL_NV_texture_shader
GL_NV_texture_shader2
GL_NV_texture_shader3
GL_NV_transform_feedback
GL_NV_transform_feedback2
GL_NV_vertex_array_range
GL_NV_vertex_array_range2
GL_NV_vertex_attrib_integer_64bit
GL_NV_vertex_buffer_unified_memory
GL_NV_vertex_program
GL_NV_vertex_program1_1
GL_NV_vertex_program2
GL_NV_vertex_program2_option
GL_NV_vertex_program3
GL_NVX_conditional_render
GL_NVX_gpu_memory_info
GL_OES_compressed_paletted_texture
GL_OES_depth24
GL_OES_depth32
GL_OES_depth_texture
GL_OES_element_index_uint
GL_OES_fbo_render_mipmap
GL_OES_get_program_binary
GL_OES_mapbuffer
GL_OES_packed_depth_stencil
GL_OES_point_size_array
GL_OES_point_sprite
GL_OES_rgb8_rgba8
GL_OES_read_format
GL_OES_standard_derivatives
GL_OES_texture_3D
GL_OES_texture_float
GL_OES_texture_float_linear
GL_OES_texture_half_float
GL_OES_texture_half_float_linear
GL_OES_texture_npot
GL_OES_vertex_array_object
GL_OES_vertex_half_float
GL_SGIS_generate_mipmap
GL_SGIS_texture_lod
GL_SGIX_depth_texture
GL_SGIX_shadow
GL_SUN_slice_accum
GL_WIN_swap_hint
WGL_EXT_swap_control
GL_EXT_bgra
Hard Drives
SAMSUNG HD502HJ ATA Device
Manufacturer SAMSUNG
Business Unit/Brand Desktop
Model Capacity For This Specific Drive 500GB
Heads 16
Cylinders 16.383
SATA type SATA-II 3.0Gb/s
Device type Fixed
ATA Standard ATA8-ACS
Serial Number S20BJ9FB901409
LBA Size 48-bit LBA
Power On Count 619 times
Power On Time 112,8 days
Speed, Expressed in Revolutions Per Minute (rpm) 7200
Features S.M.A.R.T., APM, AAM, NCQ
Transfer Mode SATA II
Interface SATA
Capacity 466GB
Real size 500.107.862.016 bytes
RAID Type None
S.M.A.R.T
01 Read Error Rate 100 (100 worst) Data 0000000000
02 Throughput Performance 252 (252) Data 0000000000
03 Spin-Up Time 082 (081) Data 00000015D7
04 Start/Stop Count 100 (100) Data 000000026F
05 Reallocated Sectors Count 252 (252) Data 0000000000
07 Seek Error Rate 252 (252) Data 0000000000
08 Seek Time Performance 252 (252) Data 0000000000
09 Power-On Hours (POH) 100 (100) Data 0000000A92
0A Spin Retry Count 252 (252) Data 0000000000
0B Recalibration Retries 252 (252) Data 0000000000
0C Device Power Cycle Count 100 (100) Data 000000026B
BF G-sense error rate 252 (252) Data 0000000000
C0 Power-off Retract Count 252 (252) Data 0000000000
C2 Temperature 061 (045) Data 00000F0027
C3 Hardware ECC Recovered 100 (100) Data 0000000000
C4 Reallocation Event Count 252 (252) Data 0000000000
C5 Current Pending Sector Count 252 (252) Data 0000000000
C6 Uncorrectable Sector Count 252 (252) Data 0000000000
C7 UltraDMA CRC Error Count 200 (200) Data 0000000000
C8 Write Error Rate / Multi-Zone Error Rate 100 (100) Data 0000000000
DF Load/Unload Retry Count 252 (252) Data 0000000000
E1 Load/Unload Cycle Count 100 (100) Data 000000026F
Temperature 38 °C
Temperature Range ok (less than 50 °C)
Status Good
Partition 0
Partition ID Disk #0, Partition #0
Size 100 MB
Partition 1
Partition ID Disk #0, Partition #1
Disk Letter C:
File System NTFS
Volume Serial Number ECE9E9D2
Size 466GB
Used Space 427GB (92%)
Free Space 39,2GB (8%)
Optical Drives
TSSTcorp CDDVDW SH-222AB ATA Device
Media Type DVD Writer
Name TSSTcorp CDDVDW SH-222AB ATA Device
Availability Running/Full Power
Capabilities Random Access, Supports Writing, Supports Removable Media
Config Manager Error Code Device is working properly
Config Manager User Config FALSE
Drive D:
Media Loaded FALSE
SCSI Bus 1
SCSI Logical Unit 0
SCSI Port 1
SCSI Target Id 1
Status OK
Audio
Sound Cards
NVIDIA High Definition Audio
Bluetooth Audio Device
NVIDIA High Definition Audio
NVIDIA High Definition Audio
NVIDIA High Definition Audio
Realtek High Definition Audio
Playback Devices
Højttalere (Realtek High Definition Audio) (default)
Realtek Digital Output (Realtek High Definition Audio)
Realtek Digital Output(Optical) (Realtek High Definition Audio)
Recording Device
Mikrofon (Realtek High Definition Audio)
Speaker Configuration
Speaker type Stereo
Peripherals
HID-tastaturenhed
Device Kind Keyboard
Device Name HID-tastaturenhed
Vendor Apple Computer Inc
Location USB-inputenhed
Driver
Date 6-21-2006
Version 6.1.7601.17514
File C:\Windows\system32\DRIVERS\kbdhid.sys
File C:\Windows\system32\DRIVERS\kbdclass.sys
HID-kompatibel mus
Device Kind Mouse
Device Name HID-kompatibel mus
Vendor AMP,
Location USB-inputenhed
Driver
Date 6-21-2006
Version 6.1.7600.16385
File C:\Windows\system32\DRIVERS\mouhid.sys
File C:\Windows\system32\DRIVERS\mouclass.sys
Printers
Fax
Printer Port SHRFAX:
Print Processor winprint
Availability Always
Priority 1
Duplex None
Print Quality 200 * 200 dpi Monochrome
Status Unknown
Driver
Driver Name Microsoft Shared Fax Driver (v4.00)
Driver Path C:\Windows\system32\spool\DRIVERS\x64\3\FXSDRV.DLL
Microsoft XPS Document Writer (Default Printer)
Printer Port XPSPort:
Print Processor winprint
Availability Always
Priority 1
Duplex None
Print Quality 600 * 600 dpi Color
Status Unknown
Driver
Driver Name Microsoft XPS Document Writer (v6.00)
Driver Path C:\Windows\system32\spool\DRIVERS\x64\3\mxdwdrv.dll
The GPU is N570GTX Twin Frozr III Power Edition OC
Cannot show afterburner screen because of linking policies (It seems)Quote
I' unsure to see where the Serial Number is to be found and I'm not ready to remove the card do to the possibility of warranty issues.
Without S/N no help can be provided.
Serial Number Illustration -
How to play movies with different ext like wmv and...
need to know how to play movies with various ext like wmv..mpeg..vlc on e7
If the phone's built-in video player does not handle those formats, your option are:
- find some other video player app that does, or
- convert the videos to a supported format
The E7 supported video formats are listed on, e.g., this page:
https://www.developer.nokia.com/Devices/Device_specifications/E7-00/
Hit "Expand all" and scroll down to "Video Playback Formats". -
This occurred whilst downloading. The download stopped and now I can't start it again. Even if I try to purchase it again I can't, as it says 'downloaded' instead of the price tag. I'd love to know the answer as we are in the middle of the third season of 'Game of Thrones'! Thanks.
This response is a little late as I just read about your problem. I have a 2012 Dodge Charger and a 2012 Chrysler Town and Country and both worked flawlessly with the iPhone 5s my wife and I had. However, we just upgraded to the iPhone 6 and Uconnect will receive calls but you cannot answer them. You can callout successfully, however. the annoyance being the inability to answer incoming calls in the HandsFree mode.
-
While watching a rented movie on my iPad it stops and says-Can't load video.
I rented a movie to watch on the plane and 1/3 way thru movie the mssg came up that Video can't load! This happened to a second movie on the flight home.
Yes. I had downloaded at home. Never had this happen before.
-
Movie on my iPad just stopped and wouldn't start.
I was watching a movie and close to the ending it just stopped. I have restarted and it still didn't work. Please help!
Try restoring the device using iTunes. Connect the iPad to your computer and when iTunes opens, select your device on the left side, then click on the summary tab, then click on Restore.
After the device is restored you will have an opportunity to restore from your backup. Restore from the backup when you are done and then sync with iTunes.
if that doesn't work, try recovery mode.
http://support.apple.com/kb/ht4097 -
Rented a movie from iTunes, playback has stopped and no longer works.
Today I rented and downloaded a movie from the iTunes store. Got about 5 minutes into it and the playback froze.... I tried to fast forward... Nothing. Tried to rewind. Nothing. So I closed iTunes completely and reopened. Now when I try to play the rental, I just get a black screen. I don't want to waste $4.
How to report an issue with Your iTunes Store purchase - http://support.apple.com/kb/HT1933 - working through iTunes application and iTunes Store interface.
iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html -
Please help. I have transferred my iTunes library from one external hard drive to another plus added additional music now I have duplicates of the same music in many albums. How do I delete the duplicates without going through them one by one which would take forever? I understand how to get the "show exact duplicate" feature up on iTunes but, because they were added to the library on the exact day I can't seperate them I'm that manner. So each duplicate is right next to eachother in the exact duplicate screen.
My DeDuper script is designed to help clean up. See this thread for background.
tt2 -
Multiple hard drives, user folders and SSD's
I thouhght I would ask for advice here before I even start.
OK first a bit of background.
OSA X 10.6.8
When I bought my Mac, I fitted extra 1TB hard drives, setup like this:
Drive 1 Mac OS 500gb
Drive 2 User home folders..moved from MachintoshHD/users 1TB
Drive 3 Data Folders, used for import of video, music and data before inport to Aperture/iPhoto/ Final Cut etc 1TB
Drive 4 Time machine backign up Drive 1 and 2 1TB
All drives as stndandard from Apple Caviar Black
Drive 3 is backed up via ChronoSync to a remote NAS box.
In the need for speed I removed the 500gb drive No. 1 and fitted a 120Gb SSD drive...and although it is quicker, it is not as good as expected, no doubt in part to the fact that the User Home folders are on a standard drive
I can't jsut move the user Home folders back to the SSD, due to space of the Aperture, iPhoto and iTunes Librarys in the User Home folders.
Iphoto 110Gb and Itunes 440Gb
So I was thinking Use my Drive 2..that is currently the 'Home Folder drive" as a shared data store for the iPhoto Itunes and other librays.
But need help to do this and advice on how to go about it
I will leave this post here for now as I have just had an energency work callout. But any suggestions or advice before I start will be very much appreciated.
I do not want to risk the iPhoto database/faces etc with a move form one drive to another and have it all go sour
Thanks
Neil"Leave just the /Users/my_account/Library on the SSD" Yes...that is what I want to achieve...at the moement it is not on the SSD it is on the seperate Users HDD ( No. 2) I want the User folders back on the SSD No luckily did not buy from Apple..just bought the same type as fitted...Think I bought them from Dabs. but itwas 2009, so can't remeber now "Use preference to tell iPhoto etc to use another hard drive, same for iTunes media " So can i just copy the iPhoto and iTunes bundles across from one drive to another ? or are permisions etc going to get screwed, depending on the permissions of the drive I copy too? I do not liek to stripe drives , create arrays ..OK HDD space is relatively cheap now so the loss of space caused by using a RAID array ios not a major issue, but OI like to keep individual drives as individual drives...so no re build is needed if there is a crash. I rather keep three indepant drives ..all with same data on them and rotate the drives on a weekly /monthly basis.. I have two FreeNAS boxes with identicla drives in them and use them as indepandatnbackups...Backup is not the iissue here, it is the moving of iPhoto librarys etc and the possible confusion the databases get into when moved with permissions etc
-
Burned DVD movies skip/freeze on regular DVD player
I've made a few home movies, and burned them on to DVDs. When I play them on a regular DVD player (Sony), the movie skips/freezes from time to time. I've burned the same movie on my other MacBook, and this does not happen.
Could it be that the SuperDrive on this MacBook is broken?Hi,
I would take a look at the following:
1. Try a different brand blank DVD medium when you burn the disc. Set top players seem to be a lot more sensitive to the brand of disc than computers.
2. Burn the iDVD project to an image file. Share the image file over to another Mac and burn it there. See if you still have problems with playback.
3. If you still had problems with an image file burned on a different computer, then you know it must be something in the data format of the disc. I've experienced problems with some set top DVD playback machines that can not handle sustained high bit rate content. As far as I know, iDVD uses a relatively simple encoding strategy, and does not do much to reduce the information content of the encoded video stream. If you start with a high resolution QuickTime or DVI import, playback machines with limited disc performance might not be able to keep up.
I did some fairly superficial Google searches and looked at iDVD, and I didn't see any means of setting up the bit rate and encoding strategies that iDVD will use. Perhaps, somebody with a little more experience can comment?... A professional DVD encoding software suite will do a multi-pass encoding - once to figure out optimization and then again to render output. That sort of analysis might require an over-night run to make the disc. I have a feeling Apple avoided that in order to make iDVD more consumer friendly. It also avoids stealing market from more professional products like Final Cut.
You might be able to go into iMovie HD to edit the clips. You could send them to QuickTime, and reduce the bit rate there, then import the QuickTime clips into iDVD.
--Bill -
In Trying to convert my flash movie to the latest Flash format and from action script 2 to 3
In Trying to convert my flash movie to the latest Flash format and from action script 2 to 3 I get this error message Scene 1, Layer 'Layer 3', Frame 1, Line 2, Column 7
1119: Access of possibly undefined property showMenu through a reference with static type Class. This is the debug scrip this.loadVariables("_urls.txt") Stage.showMenu=false; stop(); I don't know how to fix this. Can any one Help. The movie loads to 99% then stops and reloads again. over and over again.Stage is a protected keyword in AS3 and it has no property showMenu
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/display/Stage.htm l -
I downloaded from iTunes a hd movie for the first time. What a disaster ! Keep stopping and looks like after 2 days has not been downloaded. What am I suppose to do? Can I get my money back? How?
Contact iTunes suport... http://www.apple.com/support/itunes/contact/
It sounds like you might have a slow wifi internet connection? How fast is it with a speed test from your iPad. -
Ordered a movie to rent. Was watching it then it stopped and had the timer thing going on forever. Stopped watching it and went to bed. Tried to watch it again the next day.It Said for us to go to settings, then iTunes Store, then ck for rentals. Still, the timer kept working and could not continue to watch our silly movie. This has happened to us many times. VERYYYYYYYYYYYYY annoying. I am beginning to HATE Apple TV. Please advise!
If it's stopping during the movie that could be network related. As for locating the rental, try logging out of your account and signing back in again.
-
Tiger randomly stopped allowing my External Hard drive to mount and...
Hello, I have been using an External Hard Drive (1 terabyte Seagate, new) for a couple months if not a year by now for saving movies, and all of my iTunes on it. Its been working wonderfully. However it recently stopped being able to mount citing invalid hard drive and gives me the options of either eject, ignore, or initialize. Im not sure what to do. And also my computer has been acting funny every since the day it started. I will walk you through it step by step.
July 6th I was surfing the web and unfortunetly clicked on a link that aparently contained a trojan. Or atleast thats what my Antivirus notified me of. I had downloaded the trojan some how without a pop up or anything telling me I was downloading anything. (using safari) So i ran a virus scan and saw one virus was in my system and that it couldnt be deleted or repaired by my antivirus program, Im working on getting rid of that but at the time I had my Seagate 1 terabyte external hard drive attached via fire wire to my Macbook. It was working then.
Later that day I unplugged my hard drive and took my laptop around a little bit, nothing unusual. Then when i came back later that night I tried plugging in my hard drive and a pop up stated that the hard drive was unable to mount and I could either eject, ignore, or initilize. I tried may different routes, restarting, letting it all rest, etc. And in Disk Utility i try to verify the disc and it says its unable to and needs repairs. So I try repairing the disc and it says unable to due to an error.
Then yesterday I went to my applications and noticed none of my applications are there anymore. These applications were saved on the internal hard drive so it was very odd to me. However i can still use spotlight to find and open my apps.
My question is, What can I do to allow my external hard drive to mount? I dont figure it is the trojan on my system but could it be? If so how would I fix it? Im mostly worried about getting the data off the external hard drive then I can reformat it. Or if theres a way to just get it back to normal without reformatting Id love to hear it. As for the applications missing and the trojan on my internal hard drive I can fix that, at the very least Ill just reboot my system with my original OS Disc and just start fresh, its about time anyways.
But please. If anyone has ever had their external hard drive just stop mounting and figured out what to do I would be ever so grateful to hear how you did so. The hard drive itself isnt damaged, its not making any unusual sounds. Whenever i plug it into the computer it acts like normal (turning on and what not) until the computer tells me it cannot mount then nothing happens. Ive looked online and it seems to be a software issue.
If its any help I was downloading a torrent (.avi, no viruses) at the time. I know sometimes if one file on the hard drive becomes corrupt the whole thing becomes unusable. Regardless I would appreciate it if anyone knows a way to at the very least retreive the files on the drive, but preferably know how to just get it back to normal. If i could get it to force mount (via terminal or something) I know which file would possibly be the corrupt one or something so I could work with it.Bejan:
Thanks for posting back with the pics of the messages from your computer. Disk Utility reports "Underlying task reported failure" when repairing a volume is a directory error which cannot be repaired by Disk Utility. Unfortunately, Disk Warrior may not be able to replace the rebuilt directory, either. Tech Tool Pro has a better chance of repairing it, although this particular directory issue can be stubborn, and is often rooted in a hardware issue. Your surest bet is to backup/clone the information on the HDD using a utility like SuperDuper or Carbon Copy Cloner, completely reformat and erase the HDD (directions below), then restore data from backup.
Formatting, Partitioning Erasing an External HDD
• Connect external HDD to computer
• Turn on external HDD
• Start up computer and log in
• Go to Applications > Utilities > Disk Utility and launch DU.
• Select your HDD (manufacturer ID) in left side bar.
• Select Partition tab in main panel.
• Click on Options button
• Select Apple Partition Map (PPC Macs) or GUID Partition Table (Intel Macs)
• Click OK
• Select number of partitions in pull-down menu above Volume diagram.
For more partitions than one, after you have selected the number of partitions adjust the size of the partition by selecting the top partition and typing in the size; then move down if more adjustments need to be made.
(See Dr. Smoke’s FAQ Backup and Recovery for tips on partitioning external HDD)
• Type in name in Name field (usually Macintosh HD)
• Select Volume Format as Mac OS Extended (Journaled)
• Click Partition button at bottom of panel.
• Select Erase tab
• Select the sub-volume (indented) under Manufacturer ID
• Check to be sure your Volume Name and Volume Format are correct.
• Click Erase button
• Repeat above procedure to erase each partition
• Quit Disk Utility.
cornelius
Maybe you are looking for
-
Can I use a usb thumb drive for Time Machine?
Can I use a usb thumb drive for Time Machine backups?
-
Having a Kernal process running. Computer seems to run OK but fan which almost never runs is on continuously for the past 3 days. 7/4/11 7:31:21 AM com.apple.launchd[1] (edu.mit.Kerberos.krb5kdc[707]) Exited with exit code: 1 7/4/1
-
Agent determination getting failed for one particular scenerio
Hi, I am working on production workflow issue. Production system is cluster of hospitals for HR system. Staff applies leave from hospital A by keeping approver from hospital B. Workflow is triggering. The problem is work item is not getting placed in
-
Compare two devices to find difference with installed applications
Hi, In our organization we have small group of users, who has rights to install any software on their PC's. Of course, they are getting these rights only form some reason e.g. special knowledge for install or configuration specific application. Unfor
-
I have 2 catalyst 6506 and 2 cache engines. Want to achieve transparent caching(Client have proxy setting on the IE) I have configured exactly what the user guide has shown. But I cant see the http traffic begin re-direct to Content Engine. The http