Moving a centered image to the left or right (shake)

I shot a close up of a face of an interviewee in the center of the screen with a green screen in the background. I'd like to cut the image of her face to the right or left of the screen. Could somebody please help me out. Thanks.

Use a move 2d node -- under the transform tab.
CaptM

Similar Messages

  • I have a video I 'm editing and some of the shot taken (on the left and right) I would like to remove. Is this possible to do ? If so, how?

    I have a video I 'm editing and some of the shot taken (on the left and right) I would like to remove. Is this possible to do ? If so, how?

    If you mean there are parts of the picture at the sides you want to remove, you have at least 2 choices.
    You can mask the edges of the frame or enlarge it so that the left and right sides are outside the picture area.
    The latter suggestion will reduce the quality of the video and you will also lose an equal amount from the topand bottom, though you could slide the image up or down.

  • Viewing angle to the left or right I get a Yellow tint

    When I move to the left or right I get a Yellow cast to my screen. Moving up and down no yellow tint.
    Normal or not?

    I had the same problem,
    You need to change the color profile to this one:
    http://idisk.mac.com/sacha.rod/Public/Color%20LCD%20Ca
    librated%20by%20Sacha%20Rod.icc
    Let me know if it's ok after using the new color
    profile.
    I will give it a try.....but how do I do that. I down-loaded the profile but don't know how to install it?
    Thanks

  • How do I move a page to a new location that is offscreen to the left or right on the planning screen

    When I'm in the planning screen mode, even though I have the thumbnails set on their smallest size, my website is so large that the  branches of the hierarchal layout of webpages and their various subpages stretch out to the left and right far distances off the screen. When I try to move one of the little rectangular webpage icons in the hierarchal layout in Plan Screen mode, I can't move it off screen to the left or right to change its position in my website's horizontal menu.  In other words, even at the smallest setting for the icon webpage thumbnails, there's so many icons that they go off page and I can't move a webpage icon to a position that is currently off-screen to the left or right in the menu layout.
    Any ideas how to do that?  Is there a non-graphical way to do it? Thanks!!!

    Your best bet is to reduce the thumbnail size to the smallest, then turn off thumbnails (to speed redraw), then drag in multiple steps, scrolling the Plan view each time. In the upcoming release of Muse (June 17th) you will be able to collapse vertical stacks of pages, which will means your Plan view won't be as wide. If you collapse each stack, you will only see the top level pages, and you won't have to scroll as many times. Or maybe they will all fit. What you really need is autoscroll in Plan view, which we don't currently have.
    Paul Sorrick
    Muse Engineering

  • I went to the full screen and don't like it and need to know how to get back to what I had. Also, is there a good way to set up bookmarks? Like in a column on the left or right side? Thank you.

    I went to the full screen and don't like it and want to get back to what I had. Also, is there a way to set up bookmarks so that all show in a column on the left or right side?

    Just press F11 on your keyboard to exit full screen mode.

  • How do I plot a y axis on the left and right in DIAdem/VIEW (version 11.0)?

    I am trying to analyze flight data, and I would like to analyze plots of certain parameters so that they share an x axis. It is necessary to view these using two different y axis, on the left and right. How do I do this in DIAdem (version 11.0) in the VIEW tab? Is this possible to do in the VIEW tab?

    myocom,
    You can highlight random points in DIAdem as well. 
    Here is an example:
    Use the cursor to move to the point you wish to highlight.
    Press the "Set Data Point and Flag" icon on each data point you wish to highlight
    When you are done selecting points, press the "Flags: Copy Data Points" icon - that will copy all X/Y coordinates into two new channels
    I created a REPORT Layout using the original data and the highlighted random points (I added the actual point Z-value above the point, they look strange when written at the exact point). I attached the layout for your reference.
    The complete task took 3 minutes from loading the data to finishing and exporting the REPORT layout. If you have a REPORT layout already, this will take less than 30 seconds ...
    I am not familiar with Matlab, so I can't compare how this works in DIAdem vs. Matlab. You can add the combine the complete process in a Script and it will automatically create this kind of report after simply selecting a few data points in VIEW and then pressing a button ...
        Otmar
    Otmar D. Foehner
    Business Development Manager
    DIAdem and Test Data Management
    National Instruments
    Austin, TX - USA
    "For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."
    Attachments:
    Report with highlights.zip ‏5 KB

  • White Borders Around the Left and Right Edge of a Published Movie

    Does anyone know how to get rid of the white borders that are around the left and right edge of a published movie? It looks like they are about a 1 pixel border. I have the "show borders" unchecked in the themes options.
    Any help would be appreciated.

    You need to add some CSS code into the HEAD area of you HTML publishing template to remove the default HTML margin.
    <style>{margin:0px;}</style>

  • It it possible to have info on the left and right sides of iweb templates?

    When I look at my iweb website there is empty space on the left and right sides of my screen. I was wondering if this space could be used at all?

    Hi
    You can increase the width of your Page, go into Inspector, Page Tab. From here you can adjust the Content Width, which is the width of your page, the bits that you see on the left and right are fillers, for people who's browsers are set bigger than your site. You can change the color that shows by changing the Browser Background.
    In the good 'ole days, most people had screens that were only 800 W x 600 H, but these days most people have at least 1024 W x 768 H (some do, no doubt still have 800x600). So, 1024 is really the max width you can go, dont forget that you need to leave some space for the browser as well, and the scroll bars.
    But pages this big are wider than normal, the best thing to do is experiment and see what works for you.
    Will
    1GHz G4, 15" PowerBook, Airport Network, 1G iPod Mini   Mac OS X (10.4.6)   www.willg4pb.com for iWeb tips

  • When you scroll to the bottom of the list of files in Finder, the left to right scrollbar doesn't let you click the last file and it covers the file for a while until it disappears. Is this a bug? How do I not make that happen?

    When you scroll to the bottom of the list of files in Finder, the left to right scrollbar doesn't let you click the last file and it covers the file for a while until it disappears. Is this a bug? How do I not make that happen?

    An odd workaround: click "Always" in System Preferences/General/Show scroll bars. The scroll bars will always show, but they won't cover your last file.
    See this other post: https://discussions.apple.com/message/20572471#20572471

  • Thunderbolt has 2" blank border on the left and right edges.

    When I connect my Macbook Pro 13" to my Thunderbolt display, the screen display has a 2" border on the left and right edge.  How do I size the screen to fill up the entire display?

    Hi. I had the same resolution problem as jmzmac...I turned off mirroring and my Thunderbolt display now just has the standard screen saver on it. If I click on System Preferences that window will show on the TBD and I can move my mouse across the two screens so I have an extended desktop but I really want mirroring with the correct resolution so there isn't that 2" space on either side of the screen. I tried the clamshell mode (closing the MacBook Pro, waiting a few seconds, pressing any key to wake it up) but nothing happens on the TBD. Any help would be greatly appreciated. (Running 10.6.8)

  • How do I get page numbers on the left and right side of the page?

    I am finishing up a book in PAGES '08 on my Mac.
    How do I get page numbers on the left and right side of the page.
    I can get them on the page but I'd like them on the left and right sides.
    Evan

    If the icons are from dmg files that were used to install 3rd party apps like this one for VueScan
    Control (right) - click on the open dmg icon and select "Eject  xxxx" from the contextual window.
    Then find the actual dmg file associated with those icons
    and drag to the Trash in the Dock and empty.

  • I would like to transfer old reel-to-reel tapes to an iMac. There are different recordings on the left and right channel of the tapes. When I connect the tape deck to the Mac, I get one recording on the left, the other on the right speaker. What to do?

    I was about to transfer some music from a reel-to-reel machione to my Mac. There are different sound recordings on the left and right channels. When I connect with RCA cables and Y-connector, I hear one recording from the left speaker, another from the right side. How do I record only one side, but hear it from both speakers?
    Detlef

    You don't say what end, or connectors are plugged into what. I'm assuming the RCA connectors are on the reel-to-reel end. Since the tape has two different mono recordings, one on each track, you of course only want one at a time during playback. Otherwise, the Mac (or any recording setup) can only treat it as a stereo recording with the standard Left-Right tracks.
    1)  There are multiple ways to connect different types of cables to get a mono signal down to a stereo output at the Mac. Here's one way.
    2) Plug any RCA cable (single cable or stereo) into only the right or left RCA output of the reel-to-reel.
    3) On the other end of the RCA cable, plug in an adapter like this. That will feed the single RCA output into a mono 1/8" plug.
    4) Then plug that adapter into this. That turns the 1/8" mono signal into a "stereo" output with the same single track audio being fed to the Mac on both the left and right channels.
    5) Record either the left or right output of the reel-to-reel. Rewind the tape and switch the RCA connector on the reel-to-reel to the right channel (if you started with the left) and record that mono signal as stereo.
    Or, avoid all of this hardware mumbo-jumbo in the first place and do this:
    1) Record the audio just the way you have it. Two different recordings, one on each channel.
    2) Copy the audio recording to a new name and open it in your editor.
    3) Highlight the left track and copy/paste it into the right track. Presto! Mono recording of the left track on both channels. Save the recording.
    4) Repeat, only copy/pasting the right track into the left track and save the second recording.

  • HT201322 What if it doesn't give you a "hide" option when swiping to the left or right ? And it's doing that on my iPhone 5 & my new iTouch (5th Gen) ?!? Any advice would be helpful.. Thanx!

    Mine does not give me an "option" to hide purchased items and the specific one I'm referring to was FREE, and when I swipe to the left or right it doesn't do NOTHING! I need help guys..lol

    It doesn't appear to work on iOS 6 (and neither does unhiding, though you can still view and download them) - whether that is permanent or only temporary I don't know. You should still be able to hide things via your computer's iTunes.

  • UDF to trim the left or right of a string

    hi,
    My task is that i ave to Trim the left or right most occurances of a Character.For exp
    my input = 003045609800
    than if the characters to be trimmed is '0' than on left & right trim the output should appear as below
    lefttrim=3045609800
    righttrim=003045609800
    Please help me with the Code.
    Thanks in Advance,
    Bhargav

    Hi
    This should be the code that you are looking for
    Left trim.
    @param pstrValue The string to left trim
    @return Returns a left trimmed string
        public static String ltrim(String pstrValue) {
            if (StringUtil.len(pstrValue) > 0) {
                if (pstrValue.charAt(0) == ' ') {
                    if (StringUtil.len(pstrValue.trim()) == 0) {
                        return ""; // This is an empty string
                    } else {
                        // Remove the fist char if it is a space
                         while (pstrValue.charAt(0) == ' ') {
                             pstrValue = pstrValue.substring(1);
                         return pstrValue;
                } else {
                    return pstrValue;
            } else {
                return pstrValue;
    Right trim.
    @param pstrValue The value to right trim
    @return Returns a right trimmed string
        public static String rtrim(String pstrValue) {
            if (StringUtil.len(pstrValue) > 0) {
                if (pstrValue.charAt(pstrValue.length()) == ' ') {
                    if (StringUtil.len(pstrValue.trim()) == 0) {
                        return ""; // This is an empty string
                    } else {
                        // Remove the fist char if it is a space
                         while (pstrValue.charAt(pstrValue.length()) == ' ') {
                             pstrValue = pstrValue.substring(pstrValue.length() - 1);
                         return pstrValue;
                } else {
                    return pstrValue;
            } else {
                return pstrValue;
    regards
    krishna

  • How can I make an object float to the left or right?

    I am currently working with a site that is designed to fill the browser window.
    I would like my footer elements to attach to the left and right respectively. I know in html this can be accomplished by using "float", but I don't see any way to accomplish this in Muse.
    Am I missing something?

    Hi Skyler,
    If you are looking for the element to remain on screen in same position at all times then I think using the 'pin' option is what you are looking for. With a box (or whatever) selected you'll see an option at the top, next to your x,y co-ordinates with a little square with 6 selectable points, each point representing where the element will stick to.
    Alternatively if you are just wanting the bar of the footer to stretch across the window regardless of size then if you have the left of the bar exactly on the outside left edge of your page, and same with right, it should do the stretching for you automatically.
    Is this what you were meaning?

Maybe you are looking for