Moving a server & adding a PO

Currently the system consists 2 Servers
OES11 + GW2012
Due to reorganization we are moving a whole department to another site
the site will be linked by Site-Site VPN over an ADSL link
Server 1 - user files
Server 2 - groupwise inc webaccess & gwia - single post office
So my thoughts are to add a 3rd server & add a 2nd PO
move users concerned to new PO
Server 3 will have PO, MTA & Webaccess installed
There is a GW Document library being used by most of the users - so will need to have a library for each PO
Mobiles are setup as IMAP - I have 2 GWIA's running on Server 2 (2nd GWIA for out bound only for mobiles)
Questions:
First of is adding a 2nd PO the answer or do I need to consider anything else ....are there any "gottchas"
Would users at both PO be able to use mobiles via GWIA on Server 2
I'm NOT sure how the documents will move...Document Management - when I move users from one PO to another would the documents move to the PO ?
Folder Shares - what happens - would sharing still be valid?
Documents - what happens to documents that are currently shared ?
Anyone done this before? - any advice appreciated

In article <[email protected]>, Bhrt60 wrote:
> So my thoughts are to add a 3rd server & add a 2nd PO
> move users concerned to new PO
> Server 3 will have PO, MTA & Webaccess installed
It is easiest if you can build this server on the IP addressing of the new
location. It 'just' needs your router to know that network as local and do
the routing between the two networks. Those networking changes are
usually easier to do than all the bits in OES.
> Would users at both PO be able to use mobiles via GWIA on Server 2
As long as that GWIA can get to both POAs, it should be just fine.
> I'm NOT sure how the documents will move...Document Management - when I
> move users from one PO to another would the documents move to the PO ?
I'm a bit fuzzy on that side as well as my clients haven't used DM much.
Unless someone else pipes in, you might just have to experiment a bit and
watch carefully when you move a user with known files in DM.
Andy of
KonecnyConsulting.ca in Toronto
Knowledge Partner
http://forums.novell.com/member.php?userid=75037
If you find a post helpful and are logged in the Web interface, please
show your appreciation by clicking on the star below. Thanks!

Similar Messages

Can't delete primary zone in DNS after moving the server

Woe is me!
Our MacMini was hosted at a Colo site and working fine. No firewall in front of the machine, so we turned on the server firewall and only allowed mail, web, ftp, and a couple of other services. This worked great using our external public DNS wired to our domain names and public fixed IP address. Later, we got VPN up a running (the trick was to create a second, local IP address for the ethernet port), but this also required us to turn on the server's DNS to create a split-brained DNS server.
Everything was working swimmingly... and then we had a hard drive crash. Since we were thinking about moving the server onsite anyway (our POS system was accessed through the VPN, but it could be slow and made our tasting room dependent on Internet access in order to run the POS), we ordered Comcast business class internet with a fixed IP address.
We updated the external public DNS to the new public fixed ip. Rather than plug the mini directly to the Comcast router (which is in pass-through mode), we elected to put a AirPort Extreme in front of it, mainly so we could get all of the POS computers on the same local network without using the mini as a DHCP/NAT router. We created a DHCP reservation on the Extreme so that the mini had a fixed local IP address. We port forwarded everything we wanted to expose to the Internet. Email started to work again. However, web services and VPN are nada.
This being Snow Leopard Server and having spent literally hours debugging DNS issues when we first got the server, I knew it wouldn't be straightforward. And it hasn't been. Even changing the IP address of the server has been a chore.
We ran "sudo changeip <old IP address> <new IP address>".
Then we ran "sudo changeip -checkhostname" and received:
"$ sudo changeip -checkhostname
Primary address = 10.0.8.2 <new static internal IP address>
Current HostName = <servername>.<domainname>.com
The DNS hostname is not available, please repair DNS and re-run this tool.
dirserv:success = "success""
Oh no, the black pit of death.
Even though I tried to modify the machine record in the local DNS to reflect the new internal static IP address, Nada.
So, looking back on my previous research from Mr Hoffman and others, I stopped the DNS service, and I deleted the primary zone and reverse lookups in order to rebuild them from scratch. Except that no matter what I do, I can't delete the primary zone - it comes back like Dracula (even though the reverse zone and all of the zone records are gone). I tried rebuilding everything using the undeletable zone, but after a few services (saved each one separately), they would suddenly disappear.
I am leery of messing with the DNS files on the server as I don't want to hose up Server Admin (my command line skills are rudimentary and slow). I have so much installed on the machine now that I am concerned about someone saying "reinstall".
Help!
Related to this is that it is not clear to me in web services which IP address you should use for the sites. The internal IP? The public IP? I thought Apache cared about the external IP address. And I think Apache is hosed at the moment due to my DNS troubles anyway.
Thanks in advance!

Morris Zwick wrote:
And does anyone know which IP you enter for your sites in the web service? The public static IP or the internal private static IP?
For the external DNS server I am sure you have already deduced that it should be the static IP issued you by Comcast and this will be forwarded by your router to your server.
For your internal DNS server you could use either the internal LAN IP, or the external IP although the later might be affected by your firewall so this you will need to test.
For the Web Server service in Server admin, if your only running a single website you could avoid the issue by just using the wildcard entry which will respond to any IP address, so this would be an empty host name and an IP address of *
In fact you don't have to specify an IP address you could just use the hostname, so it will listen to traffic arriving at your server addressed to any IP address and as long as the URL that was requested includes the hostname you define for the site it will get responded to. So if as an example you have two websites you want to serve
www.example.com
site2.example.com
then as long as both have the IP address for the site as an * (asterisk) then both should work as separate sites for traffic addressed to either the LAN or WAN IP address of the server.
You will still need to use two IP addresses on the server to enable VPN, you could use a USB Ethernet adapter for the second one. Port forwarding for VPN is not as simple as other traffic as VPN requires traffic different to the standard IP and UDP packets. Routers that support 'VPN Passthrough' are specifically designed to accomodate this but I don't know if the AirPort Extreme does this. I have also found PPTP copes better with this sort of setup than L2TP although PPTP is generally regarded as less secure.

ICal stuck "moving to server account", how to resolve this?

I just got an iPhone and finally am syncing with iCloud, but now my calendars are stuck "moving to server". I have tried many resolutions found on support threads but none are working. I have tried logging out of iCloud, restarting computer, force quitting iCal...when I try to log out of iCloud and Delete on my Mac, System Preferences fails and quits on me. I can't uncheck the Calendars and Reminders box because it's greyed out and spinning. i'm on OS 10.8.5

Same issue...and not happy about switching to Mac!

Calendars constantly "moving to server account"

Every time i open Calendar (formerly iCal) on my MacBook Pro, it doesn't load fully. There's a status/progress bar with "Moving calendars to server account..." I can leave my computer on and awake for hours, and nothing changes. No advance on a progress bar, nothing.
I can't access calendars, I can't create new events or entries, I can't look at or edit existing ones, nothing.
If I create an event on my iPhone, it will sync to Calendar via iCloud, but the "moving to server account" message will never go away, and I can't get to my calendars from my desktop.
What do I do? Help!

I am experiencing the same exact problem, have tried Eric's suggestion and a number of other things, and still have the problem.
Someone must have a solution, this is a real pain! Can't get into the calendar at all and has to be force quit.

Moving sql server 2000 to sql server 2014

Moving sql server 2000 to sql server 2014. Could someone please give me steps to move everything from sql 2000 one server to sql 2014. I have 2 instance on sql 2000. 8 databases on each of them. On both instances we have store procedure and jobs.

i think your SQL Server 2000 is hosted on old Windows server version so based on that you should prepare new environment for SQL Server 2014 from Win Server 2012 Sp1 and SQL Server 2014 and build your clusters then start your Migration from Old Servers to
new servers and here below is 10 configurations outlines that you should look after carefully for any DB consolidation or migration from a server to a server and indeed they represent unique potentials for your DB Consolidation /migration service that
can leverage distinctly your service quality and shape you very well in front of your customers:
1- Backup DBs and restore DBs with ZERO down time and ZERO data loss in the same time …Awesome …!
2- Cloning all DB special features that are not covered by backups and restores such as :
RCSI (Read committed snapshot isolation level using row versioning)
Service brokers
Encryption keys and certificates
3- Cloning identically all SQL logins with their mapped DB users including their passwords (if SQL authenticated logins ) and privileges on both server and DB levels .
4- Copying .rdl and .rds files between different versions of reporting services where backup and restore reportserver and reportservertemp DBs is not an option
5- Cloning all special Jobs like certain business jobs configured to perform some business stuff .
6- Cloning all mail profiles with their mail accounts
7- Cloning all Linked server + Aliases might be used inside old DB servers
8- Cloning some server configurations like CLR ,CPU parallelism, Replication size , Network packet size , optimize for ad hoc workloads
9- Cloning all Replications configurations for publishers and subscribers
10- Cloning all DTC configurations for both local and clustered DTC services
Follow the below links to know the steps by the scripts:
http://sqlserver-performance-tuning.net/?p=5262
http://sqlserver-performance-tuning.net/?p=5359
http://sqlserver-performance-tuning.net/?p=5398
http://sqlserver-performance-tuning.net/?p=5415
http://sqlserver-performance-tuning.net/?p=5458
Mustafa EL-Masry
Principle Database Administrator & DB Analyst
SQL Server MCTS-MCITP
M| +966 54 399 0968
MostafaElmasry.Wordpress.com

Moving OSX server to a different Mac. Suggestions requested.

We are moving our server software from a G4 to a G5. Is there a preferred procedure to do this and retain preferences/users and groups/passwords, etc ...?
I've seen the following mentioned:
- Copying 'old' server drive with CCC or SuperDuper, and restoring it to the 'new' one.
- Exporting the Users and Groups (understanding that passwords will be lost).
Does the OSX Server install DVD let you use Migration Assistant like the regular OSX software?
TIA

I haven't used the DVD but I have used CarbonCopy cloner to clone an OS X server drive & move it to another machine. The IP address has to be the same or you won't be able to login. If the ethernet ports are different your IP won't be active.

Moving Admin server

Hey guys,
i have been assigned the task of moving our weblogic 10 (rhel AS 3) administration server from one location to another, and changing its ip address. i have replicated our environment into a virtual environment and tried changing the ip address of the administration server, but unfortunately the managed nodes were unable to connect to the new ip address of the admin server. the nodes still tried to connect back to the old ip address of the admin server. can someone please tell me the proper steps i need to take in order to make this work. Thanks
Edited by: user10950056 on Apr 6, 2009 10:21 AM

sorry for the delayed reply. been busy with other projects. i started back from square one and has now made a little more progress with the task at hand. here are the steps i have taken so far
1. replicate management server to new vm host
2. turn off original management server and bring up vm management server
3. ran the command grep -r "oldmanagementserverip" *|grep -v "log" on managed node
4. ran the command grep -r "oldipaddressofmanagementserver" *|grep -v "log" on managed node
5. edit all the files that came up in the search. edited them to point to the new management vm
the managed node can now be started remotely from the admin console. however i cannot start it up on the managed node locally by running startWeblogic.sh. Here is the output when attempting to start manually:
starting weblogic with Java version:
java version "1.5.0_11"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_11-b03)
BEA JRockit(R) (build R27.3.1-1_CR344434-89345-1.5.0_11-20070925-1628-linux-ia32, compiled mode)
Starting WLS with line:
/var/bea/10x/jrockit_150_11/bin/java -jrockit -Xms256m -Xmx512m -da -Dplatform.home=/var/bea/10x/wlserver_10.0 -Dwls.home=/var/bea/10x/wlserver_10.0/server -Dweblogic.home=/var/bea/10x/wlserver_10.0/server -Dwli.home=/var/bea/10x/wlserver_10.0/integration -Dweblogic.management.discover=true -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/var/bea/10x/patch_wlw1001/profiles/default/sysext_manifest_classpath:/var/bea/10x/patch_wls1001/profiles/default/sysext_manifest_classpath -Dweblogic.Name=10.129.1.148 -Djava.security.policy=/var/bea/10x/wlserver_10.0/server/lib/weblogic.policy weblogic.Server
<Apr 8, 2009 12:03:49 PM EDT> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
/var/bea/10x/wlserver_10.0/platform/lib/p13n/p13n-schemas.jar:/var/bea/10x/wlserver_10.0/platform/lib/p13n/p13n_common.jar:/var/bea/10x/wlserver_10.0/platform/lib/p13n/p13n_system.jar:/var/bea/10x/wlserver_10.0/platform/lib/wlp/netuix_common.jar:/var/bea/10x/wlserver_10.0/platform/lib/wlp/netuix_schemas.jar:/var/bea/10x/wlserver_10.0/platform/lib/wlp/netuix_system.jar:/var/bea/10x/wlserver_10.0/platform/lib/wlp/wsrp-client.jar:/var/bea/10x/wlserver_10.0/platform/lib/wlp/wsrp-common.jar:/var/bea/wl-prod-dr/lib/antlr-2.7.5H3.jar:/var/bea/wl-prod-dr/lib/sqljdbc.jar>
<Apr 8, 2009 12:03:50 PM EDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA JRockit(R) Version R27.3.1-1_CR344434-89345-1.5.0_11-20070925-1628-linux-ia32 from BEA Systems, Inc.>
<Apr 8, 2009 12:03:51 PM EDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.0 MP1 Thu Oct 18 20:17:44 EDT 2007 1005184 >
<Apr 8, 2009 12:03:53 PM EDT> <Info> <Management> <BEA-141223> <The server name 10.129.1.148 specified with -Dweblogic.Name does not exist. The configuration includes the following servers
<Apr 8, 2009 12:03:53 PM EDT> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.management.ManagementException: [Management:141223]The server name 10.129.1.148 specified with -Dweblogic.Name does not exist. The configuration includes the following servers
at weblogic.management.provider.internal.RuntimeAccessImpl.<init>(RuntimeAccessImpl.java:148)
at weblogic.management.provider.internal.RuntimeAccessService.start(RuntimeAccessService.java:38)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:378)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:125)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:647)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:419)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:377)
at weblogic.Server.main(Server.java:67)
im guessing its complaining that theres no dns entry for the new management vm.
im also unable to stop the managed node through admin console. here is the logs when i attempt to do so on the new management vm:
####<Apr 8, 2009 12:13:12 PM EDT> <Info> <Server> <managementservername> <managementservername> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1239207192996> <BEA-002634> <The server "managednodename" disconnected from this server.>
####<Apr 8, 2009 12:13:12 PM EDT> <Info> <JMX> <managementservername> <managementservername> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1239207193000> <BEA-149507> <JMX Connectivity has been discontinued with the managed server managednodename.>

TS3988 How do I stop my Calendar moving to server account seems stuck and will not complete. Force Quitting changes nothing?

I have just added I cloud to my PC and my Calendar is stuck trying to move to server account.
It has shown a couple of failure messages but I cannot access preferences as ther are greyed out.
What can be done to stop calendar trying to upgrade?

I am having the same issue. I am on MacOS 10.9 and the "genius" at the Apple Store deleted all my events on iCloud and attempted to re-upload them but the Calendar app has been in limbo, "Moving calendars to server account" for days.
If I quit the Calendar app and start it back up it immediately resumes uploading. So currently my Calendar app is unusable.
I would like to do 2 things. First, get it to stop moving events to iCloud. And second, find out how I can sync Calendar events from my Mac (running OS 10.9) and my iPhone 5S.
The reason why the Apple 'genius' was trying to clean out my events from iClous and re-upload them was because despite having iCloud turned on for Calendars on both my Mac and iPhone, they were still not syncing all my events.

Moving witness server to CAS server two Exchange 2013 servers with a DAG

Inherited a situation where there is one Exchange 2007 Build 83.6 server running on Win2008R2, acting as witness, and hub transport and yes is a file server too. In addition there is relays, email and service accts that need to be moved to Exchange
2013.
Presently there are two Exchange 2013 cu3 servers that are part of a DAG that also run on Win 2008r2... We wish to add another node to the DAG, and move the witness to another server.
Do I need to also add a CAS Exchange 2013 server to replace the Ex 2007 server?
Can this server also act as the Witness?
What would be the best practices for this senario. All of these machines are VM's.

Inherited a situation where there is one Exchange 2007 Build 83.6 server running on Win2008R2, acting as witness, and hub transport and yes is a file server too. In addition there is relays, email and service accts that need to be moved to Exchange
2013.
Presently there are two Exchange 2013 cu3 servers that are part of a DAG that also run on Win 2008r2... We wish to add another node to the DAG, and move the witness to another server.
Do I need to also add a CAS Exchange 2013 server to replace the Ex 2007 server?
Can this server also act as the Witness?
What would be the best practices for this senario. All of these machines are VM's.
With an odd number of nodes, the File Share Witness will not be used, but you can still define it.
Any server ( any including any non-Exchange server) can serve as the FSW as long as its not a mailbox server n the DAG and it has the Exchange Trusted SubSystem group in the local admin group on that server.
Since you are using VMs, ensure the FSW isn't on the same host as a MBX DAG member.
Not sure what you mean by adding a CAS Exchange 2013 server. Do you mean you have not installed the CAS role yet for 2013? If so, then absolutetly you need one.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

VPN no longer working after moving DHCP server to router

I am preparing my SBS 2008 environment for migration to Server 2012 R2 Essentials. I moved the DHCP server to the router (a Netgear R7000 with standard firmware). I am able to access RWW and CompanyWeb via the router from external locations.
With the VPN, however, I can only connect but cannot access any network resource (including file shares). The VPN is supported by the SBS server with RRAS. I didn't change any of the configuration because I didn't think any of it needed to be changed. The
router just needs to get it's reservations from a different DHCP server, right? Anyway, would appreciate if someone can shed some light on what's going on here.
JeHarry

Hello JeHarry,
I would recommend you to follow the TechNet to migrate SBS 2008 to 2012 R2 Essentials. Don't skip any part.
https://technet.microsoft.com/en-us/library/jj200141.aspx
Troubleshooting VPN Issues on 2012
http://blogs.technet.com/b/sbs/archive/2014/06/11/troubleshooting-common-vpn-issues-on-windows-server-2012-r2-essentials.aspx
Binu Kumar - MCP, MCITP, MCTS , MBA - IT , Director Aarbin Technology Pvt Ltd - Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Network error since moving Essbase server into new VLAN

We just moved a Solaris zone containing an Essbase server into another VLAN and now I am seeing strange problems with network timeouts. When EAS runs "query database" commands in MAXL (when you click on a database, for example), it can hang for ten minutes and then timeout. If I run this locally on the server via essmsh:
MAXL> query database <Db> get estimated size;
I get, after ten minutes:
ERROR - 1056213 - message from server [Network error [145]: Unable to connect to [chr7z037:1423]. The client timed out waiting to connect to Analytic Services Agent using TCP/IP. Check your network connections. Also make sure that server and port values are correct].
THe server isn't down and I can connect to it via EAS and HSS.
I am not sure what service is reporting this error - must be APS or HSS (which run on a seperate windows box)?
Also EAS data previews are painfully slow and/or timeout with the same network error as above.
The essbase server is in HSS mode.

Hi Philip,
As CL said ,even I had faced the similar issue. In our case , it was the concept of DMZ ( they were in 2 different DMZ's ) and not able to communicate and gave the error ( which you mentioned in your post).
Try to open up the ports ( Try to telnet also to check)
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

OS X 10.5 client and NON-OS X CUPS server: adding printers, solved

Dear all,
I had trouble in adding printers under OS X 10.5, those printers are shared via a FreeBSD CUPS 1.2.10 server on the local network.
So I did the following:
- System Preferences;
- Print & Fax, right click on the leftmost part of the window, then "Reset printing system";
- Open Terminal;
- As admin via sudo or root edit the /etc/cups/cupsd.conf file and modify the first lines so they look like:
Browsing On
BrowseOrder allow,deny
BrowseAllow all
BrowseProtocols all
BrowseRemoteProtocols all
BrowsePoll hostnameof_your_cupsserver:631
BrowsePort 631
- Save the file;
- Restart the client;
- Now you should be able to see/add the printers.
This is a quick and dirty fix, hope this helps.
Regards,
Alessandro

Hi John,
my apologies for having misinterpreted your post. I think that Apple engineers really did a big mistake by omitting the keyword BrowseProtocol="all" in the print engine setup (cupsd.conf), since that keyword basically allows the cups-polld daemon, that is the piece of the local printing engine of OS X that can "ask" the LAN for the presence of printers, to ask for printers shared via CUPS/LDAP/SLP and so on.
I hope that this will be soon fixed in a minor release, since quite a lot of people (especially in the educational/research environments) heavily relies on a centralized CUPS server to manage tens or hundreds of printers (we do have 40+ printers, exported to more 400+ clients, both OS X and Windows).
BTW, this morning I was asking a little joke to my colleagues I said to them "300+ new features, an old one missing.. try to guess which one"
All the best,
Alessandro

Physically moving CW2000 Server to a new Network

Recently I've installed a CW2000 LMS Server in my Test environment. After successful operation I moved this Box to a new Network and changed the SNMP Communities on the Server. After that ANI Server gives me an error.
I can't syncronize RME with the ANI Server, because the ANI Server is not running.
When I have a look at the Service the following appeares:
"ANIServer is running - but busy flag is set"
I din't found usefull Informations on the Web.
Does anybody have an idea?
Thanks for a Hint

CW2000 requires a static ip address. Since you moved the box to a new network, the ip address is chnaged now (so could be the hostname). In this case, you can either:
1) Re-install CW2K on the new network server or
2) Update the necessary files with the new info as in the tech tips:
http://www.cisco.com/warp/public/477/RME/sol_hostname.html
http://www.cisco.com/warp/public/477/RME/winnt_hostname.html

My server added junk at the bottom of my code

Here's what they added automatically:
<script language="JavaScript" src="
http://hostingprod.com/js_source/geov2.js"></script><script
language="javascript">geovisit();</script><noscript><img
src="
http://visit.webhosting.yahoo.com/visit.gif?us1176582456"
alt="setstats" border="0" width="1"
height="1"></noscript>
Every now and then I can see the reference to 'geovisit' in
the activity bar at the bottom of the browser. Anything I can do to
make them stop?
Thanks,
TW

What happens if you right click on the playlist in iTunes and select "copy to play order", then sync this playlist back to the iPod to reflect the change?
Does that cure it?
I would also make sure that all the songs in your iTunes library have the "album" name filled in and not left blank. iTunes and the iPod are picky about that.

Moving SAP server to a new domain

Hi,
We need to move a set of SAP servers (windows) running in one network/domain to another network/domain. No other change is planned, the systems are going to remain as is.
I would like to know
- What might be involved in achieving this (I tried searching SDN and OSS, but wasn't successful)
- What precautions I should take (I do not plan any backup etc as the SAP servers themselves are not to be touched)
Thanks,

Hi
We did the same.. moving the servers from one datacenter to other [which mean different domain, hostname, IP, DNS]
It is very easy for UNIX servers compared to Windows.. You do not need to reinstall.
The impacted components are:
- DB: For Oracle, change listene.ora, sqlnet.ora, init.ora, init.sap, passwd file
- CI & DI: system profiles
- Printers: change in mass from SPAD
- Interfaces: All interfaces at the receiving end need to change the server details..
- Any ABAP programs which is storing files in appl servers hard coding the server name
- In system profiles, check for any parameter which is hard coded to hostname like helppath
And many more..
For JAVA system, you need change the hostname via offline config tool.
SAP only stores hostname, so you need to identify all the locations where hostname is hard coded during installation/configuration.
Also you need to check performance on new servers..
Let me know if you need any more information..
Regards
Madhu

Moving a server & adding a PO

Similar Messages

Maybe you are looking for