Moving a vxvm volume from rg to local?

Hello,
Is it possible in SC 3.0 to move a volume or disks including volumes to a "local" diskgroup? What steps have to be done? Do i have to move them to the rootdg or can i convert a dg to be "local", which means that the dg is brought online by Solaris and not by SunCluster?
Thanks

This is what we do at the moment. I just want to circumvent the problems that we have: some applications have to wait for the cluster resource (the filesystem) to get online/mounted at boot time. And we had a issue, that this cluster resource was accidently restarted once, leaving all apllication that run therein in a bogus state.

Similar Messages

Using IMOVIE '08 to import from DV camera to 'BUSLINK' external hard drive( formatted for MAC ) but no success and kept getting this message: The import was canceled. You may not have permission to write to /Volumes/BUSLINK/iMovie Events.localized. Thanx

Using IMOVIE '08 to import from DV camera to 'BUSLINK' external hard drive( formatted for MAC ) but no success and kept getting this message: The import was canceled. You may not have permission to write to /Volumes/BUSLINK/iMovie Events.localized. Thanx in advance!

I finally got a representative that was able to help me, she had me go to Get Info, by right clicking iMovie from the finder, and I had to click on Sharing & Permissions>Everyone>Read & Write

Can't convert case after moving a GW SAN volume from NetWare

I have am just about done migrating my GroupWise 8.0.3 systems from NetWare to OES Linux and have saved my largest PO for last. This is the only PO using a SAN volume. My plan is to just move the volume from the NetWare box the my new Linux (OES) server.
To test this process:
- I created a new SAN volume on my NetWare box and made a copy of the post office.
- I moved the volume to my new Linux server.
- I ran nssmu on the Linux box and did a F4 Refresh eDirectory for the pool and volume.
All good so far. The pool and volume are accessible. When I run a dbcopy -l /<path to postoffice> to convert to lower case I get the following:
[272] Failed to rename file /media/nss/RESTORE/ZOOPO.BAK/offiles/fd12/50FFFDB7.00G to /media/nss/RESTORE/ZOOPO.BAK/offiles/fd12/50fffdb7.00g Error=8201
If I try to manually rename one of the upper case files it also fails:
zoo-msg3:/media/nss/RESTORE/ZOOPO.BAK # mv WPHOST.DB wphost.db
mv: `WPHOST.DB and `wphost.db are the same file
So is it the case that you dont need to do a case conversion if the post office and/or domain are on NSS volumes?

MrSted <[email protected]> wrote:
> All good so far. The pool and volume are accessible. When I run a
> dbcopy -l /<path to postoffice> to convert to lower case I get the
> following:
>
In addition to what Massimo says about not really needing to rename the
files if you are on long namespace, the -l is a dangerous switch and
should rarely be used by a human.
http://www.caledonia.net/important-d...ercase-switch/
You actually ran it with the proper syntax. So you would not experience
data loss. But -l should be used with caution. And NEVER while the POA is
loaded. But it really should be run after the files are already the proper
case on the disk. Its real job is to make the guardian DB all lowercase and
only secondarily to attempt to rename files. I myself never use it to
attempt a file rename.
Personally I DO like to have the files all lowercase, even on NSS. You
never know when you need to pick up your data and stick it on a native
Linux volume. Search for chcase and there are a few windows utilities that
can do this for you. Just map a drive to the NSS volume. If you DO change
the case with a utility, then you can run the dbcopy -l but make sure the
POA is unloaded.
Danita - http://www.caledonia.net/register

How can I determine which computer a share is connected to in /Volumes from terminal or a script?

I run a set of virtual machines via Fusion on an iMac that we run automated tests on for our website. There is a folder on each VM called /Automation that is shared.
I have a python script that runs on the host, that will find an open VM, start it up and then mount the VM's /Automation folder. So if there is only 1 VM powered on, the folder shows up in /Volumes as /Volumes/Automation. The problem is when there are 2 or more VM's powered on, because then the shares start being named /Volumes/Automation-1 and Automation-2 etc. So my question is, how can I determine which computer each share belongs to from terminal or a script?
In other words, I'm looking for something like:
/Volumes/Automation = "FirstVirtualMachineName.local"
/Volumes/Automation-1 = "SecondVirtualMachineName.local"
Is there any way to determine which computer a mounted share is connected to? In the past, I've just unmounted all /Automation folders, and then mounted them in a particular order, but that's unreliable and messy in my opinion. If anyone knows a better way, please let me know. Any help is appreciated.
Thanks,

Well I think I have a workable solution. It's not perfect, but I think it will do the trick. I can put a spotlight comment on the folder similar to 'HostName=OSX-Automation-1.local' and can then retrieve that value from our server with the following python snippet:
import subprocess
out,err = subprocess.Popen(['osascript','-e','tell application \"Finder\" to get comment of \"Macintosh HD:Volumes:Automation-1\"'],stdout=subprocess.PIPE, stderr=subprocess.PIPE).communciate()
So I could just loop through each 'Automation*' folder in /Volumes and grab the name from the spotlight attributes on the directories. I don't think I really need to worry about the comments being overwritten, but I may have one of our launch daemons that run on the VM check that spotlight comment once a minute or something to ensure that the correct value is there.
If it ends up not working well in practice, I'm going to give your suggestion about a config script a shot. It would require a little more up front work, but seems as if it would be pretty solid after that.
Thanks again for helping me think it through

I need to transfer all photos to an external hard drive. Many photos have been moved around or deleted from computer hard drive, but still have a very full hard disk. Are the photos with questionmarks in Lightroom still taking up hard disk space? I'm so l

Hi folks,
My hard disk is full. I already moved lots of photos from other folders on the hard disk to other external hard drives, so there are a lot of question marks in Lightroom. So, are those photos still taking up room on the computer hard disk? I want to move everything I have in Lightroom off of the computer to another external hard drive, in hopes that will free up space. I watched a tutorial, and read some things about it, but I need simple instructions please.

I cannot find this 300GB "Backup" in the Finder, only in the Storage info when I check "About This Mac".
You are probably using Time Machine to backup your MacBook Pro, right? Then the additional 300 GB could be local Time Machine snapshots. Time Machine will write the hourly backups to the free space on your hard disk, if the backup drive is temporarily not connected. You do not see these local backups in the Finder, and MacOS will delete them, when you make a regular backup to Time Machine, or when you need the space for other data.
See Pondini's page for more explanation: What are Local Snapshots? http://pondini.org/TM/FAQ.html
I have restarted my computer, but the information remains the same. How do I reclaim the use of the 300GB? Why is it showing up as "Backups" when it used to indicate "Photos"? Are my photos safe on the external drive?
You have tested the library on the external drive, and so your photos are save there.
The local TimeMachine snapshot probably now contains a backup of the moved library. Try, if connecting your Time Machine drive will reduce the size of your local Time Machine snapshots.

Convert from dictionary to local managed?

Hi all,
Good day!
when we convert from dictionary to local managed is it dependant on CPU or no of extent?
Thanks in advance
Elina

How are you converting the tablespaces? 8 hours seems excessive if you are using dbms_space_admin.TABLESPACE_MIGRATE_TO_LOCAL , I have seen situations where creating new locally managed tablespaces and moving the objects accross takes a long time as the old extnets are deallocated from the UET$ table and added to FET$. in these cases the speed of an individual CPU core is the limiting factor as SMON handles the deallocation of extents.
If this is the case then migratig the tablespace to locally managed using dbms_space_admin then migrating to a new tablespace may be faster, if not then can you post what method you are uing to migrate and the version of the database
Chris

TS1389 I have moved my iTunes library from an old PC to my new one running on Windows 8. All play normally apart from two albums: Songwriter by Justin Hayward and The Roaring Silence by Manfred Man''s Earth Band. The FAQ suggestions don't resolve the p

I have moved my iTunes library from an old PC to my new one running on Windows 8. All play normally apart from two albums: Songwriter by Justin Hayward and The Roaring Silence by Manfred Man''s Earth Band. The FAQ suggestions don't resolve the problem.

Honestly, all the people in all the world that look at this forum, no-one can tell me why my itunes is causing my machine to fall over?
I wiped the machine and started again. Fresh XP install, fresh iTune download, fired it up imported one album and bang. Over it went. I've PC Checked the hard ware, mad onioned the system to see if it's a resource thing but it's rock solid until i open iTunes. Then after every re-boot, the message is back in the event log.
This:
Source iPod Service Event ID 0
The description for Event ID ( 0 ) in Source ( iPod Service ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Service started.
Can someone at least reply to let me know I've not typed this in dutch!! :o)
Cheers
David

Connect from workstation using local credentials

AD is W2008r2,
recently moved a W2008 WebServer from a PDC to this AD's domain, the local login to the WebServer is still using WebServer local accounts.
How can I still allow users from W7 workstations to use a "net share" using the WebServer's credentials?
What we were doing was:
net use W: \\mxWeb\h 369874125A /user:mxWeb\user0 from workstations to get access ,
but since the switch to new AD that gives errors of
System error 1326 has occurred. Logon Failure: unknown user name or bad password.
I can not find how to allow this to happen in the Local Security Policy settings.
(it would be nice to get samba connections from Linux pc's to work again too, Centos 5 & 6 - samba3.6)
TechNet

net use W: \\mxWeb.blahblah.COM\h 369874125A
/user:mxWeb.blahblah.COM\user0 ?
User0 is a local use on mxWeb.blahblah.COM.
Correct?
try to delete all connection using Net Use * /D first
Santhosh Sivarajan | Houston, TX | www.sivarajan.com
ITIL,MCITP,MCTS,MCSE (W2K3/W2K/NT4),MCSA(W2K3/W2K/MSG),Network+,CCNA
Windows Server 2012 Book - Migrating from 2008 to Windows Server 2012
Blogs: Blogs
Twitter: Twitter
LinkedIn: LinkedIn
Facebook: Facebook
Microsoft Virtual Academy:
Microsoft Virtual Academy
This posting is provided AS IS with no warranties, and confers no rights.

Folders keep moving to System volume folder which is hidden

Dear All,
I am experiencing crisis in the infrastructure
I had virus infection and I had recovered from it "not completely" - the problem is folders keeps moving to hidden System volume folder
I tried working with security essential and it found that I have myfiles.exe infection
I blocked all executable files from the system - re installed new OS
I still get this problem that folders moved to system volume folder
from event viewer - after blocking exe files
user UUUUUUU attempted to save D:\xxx.exe on D:\ on server SSSSS This file matches the "Executable Files" file group which is not permitted on the system.
the xxx.exe name is the name of folder which then moved to system volume folder trying to put exe file on its place
please advice for urgent remediation

Hi,
Is the “myfiles.exe” virus deleted, when you perform a virus scanning on the server? Please boot your server in Clean Mode to see if the issue still exists.
How to perform a clean boot in Windows
http://support.microsoft.com/kb/929135
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Gathering children from disk for local accounts

When trying to get mail get message "gathering children from disk for local accounts" and mail does not come in. Any ideas?
Mac OS X (10.3.9)

I had exactly the same problem when we connected our xsan volume to a multimedia area for post-production work. You are never really safe with local users so I deleted them and created users on the server with exactly the same name and a local home folder in the Users directory defined in workgroup manager, at first login the home folder is created locally and left as is.
Because we now have no actual local users (people only think they are) we have complete control over the SAN. Privileges expressly forbid access to the users created for local use only, everything is working well.
You can find all the info you need in the OSX server 'open directory' manual. I wouldn't go down the root of scripting un-mounting and mounting volumes for particular users because your going to be fighting the system at something its designed to do. Its treating the SAN volume as direct attached storage which it needs to do in order to use for editing etc.

I moved all my music from c: drive(because it was full) to an external harddrive and now itunes can't find any of my music. Is there a way to get Itunes to find music on external drive without having to place all the music back onto the c: drive? Thanks

I moved all my music from c: drive(because it was full) to an external harddrive and now itunes can't find any of my music. Is there a way to get Itunes to find music on external drive without having to place all the music back onto the c: drive? Thanks

Hopefully you moved the entire iTunes Media (or iTunes Music) folder to a new path on your external drive. Copy your iTunes library folder out to the root of the external drive, e.g. X:\iTunes (where X: is your external drive), then move the media folder inside it. Hold down shift as you start iTUnes and keep holding untila asked to choose or create a library. Choose the library at X:\iTunes\iTunes Library.itl. Should all be good.
Failing that, download and run my FindTracks script and point it at the new location of your media folder.
tt2

I just moved my itunes library from a win 7 computer to a win 8.1 computer. Getting an error message "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. Can't play CDs or get audio file from web!

Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.

I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
However, I would also like to rent movie's from iTunes,
Would be great if iTunes would let you choose the output device, too, like most other applications using sound from Skype to Windows Media Player,...

Unable to mount dfs volume from Windows Server 2008 R2

I am trying to use Finder|Go|Connect to Server to connect to a DFS volume shared by a Windows Server 2008 R2 machine. I get the following errors:
A dialog box that says, "There was a problem connecting to the server "server name". Contact your system administrator for more information"
Messages in the log:
PM kernel: smb_ntstatus_error_to_errno: Couldn't map ntstatus (0xc0000225) to errno returning EIO
PM NetAuthSysAgent: checkForDfsReferral: mounting dfs url failed , syserr = Input/output error
PM NetAuthSysAgent: smb_mount: mount failed to <server name>, syserr = Input/output error
I've seen a reference to this article (https://discussions.apple.com/thread/3258472) to fix similar problems but that seems only to apply to Mac-based servers not Windows servers.
I called AppleCare but they said they are unable to troubleshoot a problem originating on a Windows Server.
The Mac is running 10.7.4 but the problem happens on 10.7.3 as well.
I can connect to non-DFS volumes from other Windows Servers with no issue.

After some more digging around I found out that it works when using the cifs: prefix instead of the smb: prefix in Finder|Go|Connect to Server.
So instead of using the name smb://servername.company.com I use the name cifs://servername.company.com.

I installed elements 12 on a Win 8.1 computer and moved all my photos from my old XP machine. I updated to elements 12.1. Now, many/most of my photos will not open because I do not have "permission" to open the files. How do I fix this so I can work wi

I installed elements 12 on a Win 8.1 computer and moved all my photos from my old XP machine. I updated to elements 12.1. Now, many/most of my photos will not open because I do not have "permission" to open the files. How do I fix this so I can work with MY photos?

Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

I'm new to mac I have a macpro retina and moved my music over from my pc into my music folder would like to get it into iTunes any suggestions

I'm new to mac I have a macpro retina and moved my music over from my pc into my music folder would like to get it into iTunes any suggestions

Pull down File > Add to Library, navigate to the iTunes folder and click "open." This will add all the music to the new iTunes library.

Moving a vxvm volume from rg to local?

Similar Messages

Maybe you are looking for