Moving a zone in Solaris 10 3/05

What is the proper procedure for moving a zone in Solaris 3/05 (which does not have the 'zoneadm -z <zone> move <path>' command)?

The zones stuff is tightly integrated with much of the other OS infrastructure eg kernel, libraries etc.
Its not possible to upgrade just the zones stuff by installing packages.
You could upgrade the zones stuff by applying patches, but it will drag a lot of other stuff in as preqrequisites.
Just installing a recommended patch set should accomplish this.
But it may be simpler to just upgrade to 5/08 and be done with it. Liveupgade or upgrade install should work.

Similar Messages

  • Trouble w/installing Solaris 10 branded zone on solaris 11.

    Having issues creating a policy that works installing solaris 10 u10 branded nfs zone on sol11 in opscenter 12c u1. Maybe i'm just overlooking something basic or it isn't supported in opscenter. I'm able to create the policy but seem to get a very non-informative error message when deploying it.
    Error Message:
    "The DeploymentPlan execution job failed because the DeploymentProvider ZoneDeploymentProvider for Step Create Solaris Zones failed to generate tasks for the job: Cannot prepare zone tasks: java.lang.NullPointerException. Contact My Oracle Support if the problem persists. (10445)"
    Here is the OpsCenter Profile:
    Name Prefix:      hous
    Starting Number:      1
    Zone Description:      solaris 10 update 10
    ZoneType:      
    Branded Zone
    Branded Zone Image:      
    s10-update10-flar
    Automatic Recovery:      
    Yes
    Priority of Recovery:      0
    CPU Shares:      1
    CPU Cap:      0
    Physical Memory Cap:      0
    Locked Memory Cap:      0
    Virtual Memory Cap:      0
    Language:      en_US.ISO8859-15
    Time Zone:      US/Central
    Terminal Type:      xterm
    NFSv4 Domain Name:      dynamic
    Automatically boot zone when the global zone is booted:      
    Yes
    Automatically boot zone after creation:      
    Yes
    Storage for the metadata Library:      NAS, zone-prod1

    Problem found. To jumpstart last two HP Blades we used the copies of AI templates. When we did it from scratch and re-installed the Solaris 11.0 we have no more errors.

  • Install NetConnect in Global Zone of Solaris 10 x86 with 5 local zone fail

    Problem:
    Install NetConnect in Global Zone of Solaris 10 x86 with 5 local zone failed
    But I didn't have any issue with the same pkg in Solaris 9
    Steps taken:
    # groupadd netcon
    # useradd -d /export/home/netcon -g netcon -m netcon
    # vi /etc/shadow
    change LK to NP
    # ./UninstallNetConnect.003.002.001.sh
    # ./InstallNetConnect.003.002.001.sh
    Enter the user account to use: netcon
    Enter group: netcon
    Installing Sun(SM) Net Connect Proxy Core as <SUNWsrspx>
    ## Installing part 1 of 1.
    /etc/opt/SUNWsrspx/CustomerCert.pem
    /etc/opt/SUNWsrspx/SRSCACert.pem
    /etc/opt/SUNWsrspx/binaries
    /etc/opt/SUNWsrspx/srsproxyconfig.cfg
    /opt/SUNWsrspx/bin/srsexec
    /opt/SUNWsrspx/bin/srsinstall
    /opt/SUNWsrspx/bin/srsinstallmode
    /opt/SUNWsrspx/bin/srsproxy
    /opt/SUNWsrspx/bin/srspxrun
    /opt/SUNWsrspx/bin/srspxstat
    /opt/SUNWsrspx/bin/srspxtrace
    /opt/SUNWsrspx/bin/srsuser
    /opt/SUNWsrspx/bin/srsxfer
    /opt/SUNWsrspx/lib/srsimapi.jar
    /usr/lib/libsrsimapi.so.1
    [ verifying class <none> ]
    ## Executing postinstall script.
    copying initial install customer cert into place
    copying initial install srs cert into place
    copying initial install proxy config file into place
    removing any existing uninstallscript before copying the correct one
    copying uninstall script into place
    /var/sadm/pkg/SUNWsrspx/install/postinstall: /opt/SUNWsrspx/bin/srspxrun: cannot execute
    proxy queue initialization failed
    pkgadd: ERROR: postinstall script did not complete successfully
    Installation of <SUNWsrspx> failed.
    ERROR: pkgadd failed for: SUNWsrspx
    Please correct this situation and rerun the installation.
    Exiting installation.
    # cat /var/adm/messages
    Oct 7 00:00:01 planet root: [ID 702911 daemon.error] ERROR: proxy queue initialization failed
    Any clue, or it will only possible in Global zone that didn't have any local zone
    thanks in advance

    Problem:
    Install NetConnect in Global Zone of Solaris 10 x86
    with 5 local zone failed
    But I didn't have any issue with the same pkg in
    Solaris 9
    Steps taken:
    # groupadd netcon
    # useradd -d /export/home/netcon -g netcon -m netcon
    # vi /etc/shadow
    change LK to NP
    # ./UninstallNetConnect.003.002.001.sh
    # ./InstallNetConnect.003.002.001.sh
    Enter the user account to use: netcon
    Enter group: netcon
    Installing Sun(SM) Net Connect Proxy Core as
    <SUNWsrspx>
    ## Installing part 1 of 1.
    /etc/opt/SUNWsrspx/CustomerCert.pem
    /etc/opt/SUNWsrspx/SRSCACert.pem
    /etc/opt/SUNWsrspx/binaries
    /etc/opt/SUNWsrspx/srsproxyconfig.cfg
    /opt/SUNWsrspx/bin/srsexec
    /opt/SUNWsrspx/bin/srsinstall
    /opt/SUNWsrspx/bin/srsinstallmode
    /opt/SUNWsrspx/bin/srsproxy
    /opt/SUNWsrspx/bin/srspxrun
    /opt/SUNWsrspx/bin/srspxstat
    /opt/SUNWsrspx/bin/srspxtrace
    /opt/SUNWsrspx/bin/srsuser
    /opt/SUNWsrspx/bin/srsxfer
    /opt/SUNWsrspx/lib/srsimapi.jar
    /usr/lib/libsrsimapi.so.1
    [ verifying class <none> ]
    ## Executing postinstall script.
    copying initial install customer cert into place
    copying initial install srs cert into place
    copying initial install proxy config file into place
    removing any existing uninstallscript before copying
    the correct one
    copying uninstall script into place
    /var/sadm/pkg/SUNWsrspx/install/postinstall:
    /opt/SUNWsrspx/bin/srspxrun: cannot execute
    proxy queue initialization failed
    pkgadd: ERROR: postinstall script did not complete
    successfully
    Installation of <SUNWsrspx> failed.
    ERROR: pkgadd failed for: SUNWsrspx
    Please correct this situation and rerun the
    installation.
    Exiting installation.
    # cat /var/adm/messages
    Oct 7 00:00:01 planet root: [ID 702911 daemon.error]
    ERROR: proxy queue initialization failed
    Any clue, or it will only possible in Global zone
    that didn't have any local zone
    thanks in advance
    [I believe that it does not work in x86, watches with pkginfo - l SUNWsrspx, in the platform.
    Willy Suarez
    Sopport UNIX
    Colombia/code]                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Moving a zone in Solaris10 3/05

    3/05 is pre # zoneadm -z my-zone move /newpath
    Could someone please provide me with the proper procedure for moving a zone?

    Hi,
    what we have done in the past with the same version is stopping the zone and then
    do a cpio to the new destination. Also we tried the same procedure with an
    rsync procedure.
    Both has worked, but the sizes of the copied and original zones had been different
    by comparing with the du -ks command.
    We have never seen any problems, but of course i assume that this procdures are NOT supported
    by SUN.
    Frank

  • Clustering Of two Zones of Solaris 10

    Hi,
    I want to do Clustering Of two Zones of Solaris 10 . Firstly is it possible...
    Can anybody guide me the prerequiste of this .
    Thanks in advance...

    sorry for the late response but i have something to say :
    Regarding changing screen resolution, you can issue a command #kdmconfig
    and select Xorg which will give different options wherein you can change device types, their resolution, frequency etc. after making the required changes, save & exit. reboot the system, now the screen resolution would have changed.
    you can look for the nic drivers entries in files like /etc/path_to_inst, /etc/driver_aliases, /dev.

  • Zones on Solaris 9?

    Do zones support Solaris 9?

    The following url http://www.sun.com/emrkt/campaign_docs/expertexchange/knowledge/solaris_grid.html should be able to tell you more about containers now and its history.

  • Monitoring services in zones with Solaris container Manager

    I need to know how to Manage Solaris services (SMF) in sparse zone with Solaris container manager.
    I have navigated all the documentation and I have not found any clue.
    I installed the Sun management center (SMC) server on a server box and the agents on others. I can manage the SMF of the global zone by drilling down via the console GUI. But having access to the container manager, I have to go via https connection. And drilling down on the zone did not reveal that SMF can be monitored.
    Please if you have any idea, share it with me.

    Hi,
    check these:
    - Version of webserver latest is 3.1
    # smcwebserver -V
    - check webconsole is started and running
    # smcwebserver status
    Sun Java(TM) Web Console is running
    # svcs webconsole
    STATE STIME FMRI
    online 19:38:06 svc:/system/webconsole:console
    # svcs -pl webconsole
    fmri svc:/system/webconsole:console
    name java web console
    enabled true
    state online
    next_state none
    state_time Wed Feb 10 19:38:06 2010
    logfile /var/svc/log/system-webconsole:console.log
    restarter svc:/system/svc/restarter:default
    contract_id 64
    dependency require_all/none svc:/milestone/network (online)
    dependency require_all/refresh svc:/milestone/name-services (online)
    dependency require_all/none svc:/system/filesystem/local (online)
    dependency optional_all/none svc:/system/filesystem/autofs (online) svc:/network/nfs/client (online)
    dependency require_all/none svc:/system/system-log (online)
    process 843 /usr/java/bin/java -server -Xmx128m -XX:+UseParallelGC -XX:ParallelGCThreads=4
    - check port 6789 is listen mode
    # netstat -an | grep 6789
    *.6789 *.* 0 0 49152 0 LISTEN
    if the output show
    localhost .6789 *.* 0 0 49152 0 LISTEN
    than do these:
    - check that the tcp_listen of webconsole service is true, default is false
    # svccfg -s webconsole listprop options/tcp_listen
    options/tcp_listen boolean false
    # svcadm disable svc:/system/webconsole:console
    # svccfg -s webconsole setprop options/tcp_listen=true
    # svccfg -s webconsole listprop options/tcp_listen
    options/tcp_listen boolean true
    # svcadm enable svc:/system/webconsole:console
    Regards

  • Q:Creating Solaris 11.1 zone inside Solaris 11.1 LDOM fails

    Hello,
    I have a server where I've created a LDOM and I'd like to create zones inside that LDOMs and it isn't working at all for me. If I try to create a zone outside of my LDOM it works perfectly fine. What am I missing here?
    Control domain: host-22
    LDOM hostname is host-40.
    Zone name is wls-zone.
    OS: Solaris 11.1
    Server: T5220Some information from the SP:
    ============================ FW Version ============================
    Version
    Sun System Firmware 7.4.4.f 2012/09/07 17:21
    ====================== System PROM revisions =======================
    Version
    OBP 4.33.6.a 2012/03/29 11:22I am trying this when I am creating the zone and I get an error message when I am trying to boot the zone, which I don't know the solution or how to debug. AFAIK, in Solaris 11.1, the VNIC should be created automatically when creating the zone (as it does on a bare metal machine without LDOMs)?
    root@host-40:~# zoneadm -z wls-zone boot
    zone 'wls-zone': failed to create vnic for net0: operation failed
    zoneadm: zone 'wls-zone': call to zoneadmd failedThe zone is very simple:
    root@host-40:~# zonecfg -z wls-zone info
    zonename: wls-zone
    zonepath: /rpool/zones/wls-zone
    brand: solaris
    autoboot: true
    bootargs: -m verbose
    file-mac-profile:
    pool:
    limitpriv:
    scheduling-class:
    ip-type: exclusive
    hostid:
    fs-allowed:
    anet:
         linkname: net0
         lower-link: auto
         allowed-address not specified
         configure-allowed-address: true
         defrouter not specified
         allowed-dhcp-cids not specified
         link-protection: mac-nospoof
         mac-address: random
         mac-prefix not specified
         mac-slot not specified
         vlan-id not specified
         priority not specified
         rxrings not specified
         txrings not specified
         mtu not specified
         maxbw not specified
         rxfanout not specified
         vsi-typeid not specified
         vsi-vers not specified
         vsi-mgrid not specified
         etsbw-lcl not specified
         cos not specified
         pkey not specified
         linkmode not specifiedSome more information executed inside the LDOM:
    root@host-40:~# dladm show-phys
    LINK              MEDIA                STATE      SPEED  DUPLEX    DEVICE
    net0              Ethernet             up         0      unknown   vnet0
    root@host-40:~# dladm show-link
    LINK                CLASS     MTU    STATE    OVER
    net0                phys      1500   up       --And even more information from the control domain (host-22):
    root@host-22:~# ldm list-services
    VCC
        NAME             LDOM             PORT-RANGE
        primary-vcc0     primary          5000-5100
    VSW
        NAME             LDOM             MAC               NET-DEV   ID   DEVICE     LINKPROP   DEFAULT-VLAN-ID PVID VID                  MTU   MODE   INTER-VNET-LINK
        primary-vsw0     primary          00:14:4f:fb:93:c6 net0      0    switch@0              1               1                         1500         on        
        primary-vsw1     primary          00:14:4f:f8:bb:62 net1      1    switch@1              1               1                         1500         on        
    VDS
        NAME             LDOM             VOLUME         OPTIONS          MPGROUP        DEVICE
        primary-vds0     primary          vol1                                           /dev/zvol/dsk/dpool/ldoms/ldmdev/disk_image
                                          vol2                                           /dev/zvol/dsk/dpool/ldoms/ldmprod/disk_image
    root@host-22:~# dladm show-phys
    LINK              MEDIA                STATE      SPEED  DUPLEX    DEVICE
    net1              Ethernet             up         1000   full      e1000g1
    net2              Ethernet             unknown    0      unknown   e1000g2
    net0              Ethernet             up         1000   full      e1000g0
    net3              Ethernet             unknown    0      unknown   e1000g3
    net4              Ethernet             up         1000   full      vsw0
    net5              Ethernet             up         1000   full      vsw1Any ideas what could be wrong?
    Thanks,
    Andy
    Edited by: A Tael on Nov 13, 2012 9:54 PM

    To use a Solaris 11 zone with an exclusive IP based on a VNIC, you need to be at a recent SRU of Solaris 11.1 and run a recent version of the logical domains manager  (3.0.0.2 or later) - and then configure the virtual network device to have additional MAC addresses. Please have a look at https://blogs.oracle.com/jsavit/entry/vnics_on_vnets_now_available
    regards, Jeff

  • Sharing mounts on non global zone in Solaris 10

    Dear All,
    We have SAP Development server installed on a non global zone in Solaris 10 based machine. We want to share /usr/sap/trans [in DEV's non global zone] on another machine's non global zone which will host Quality server. I'm sure it can be done, however since I am not OS admin unable to find out how inspite of reading some posts on internet.
    Can anyone please help me out here.
    regards, Sean.

    We did it.
    regards, Sean.

  • Error while creating zone inside Solaris 11.2 beta ldom

    hi
    i have installed solaris 11.2 in ldom (sparc ovm 3.1 )
    and i try to create zone inside guest domain , it always give this error
    Error occurred during execution of 'generated-transfer-3442-1' checkpoint.
            Failed Checkpoints:
            Checkpoint execution error:
                    Error refreshing publishers, 0/1 catalogs successfully updated:
                    Framework error: code: 28 reason: Operation too slow. Less than 1024 bytes/sec transfered the last 30 seconds
                    URL: 'http://pkg.oracle.com/solaris/beta/solaris/catalog/1/catalog.summary.C' (happened 4 times)
    Installation: Failed.  See install log at /system/volatile/install.3442/install_log
    ERROR: auto-install failed.

    You might want to tune PKG_CLIENT_LOWSPEED_TIMEOUT before running "zoneadm install"
    For example:
    # export PKG_CLIENT_LOWSPEED_TIMEOUT=300

  • Solaris 10 Zone for Solaris 11.1 creation with template fails.

    Hi,
    We are trying to use the Oracle VM Template for Oracle Solaris 10 Zone to create a solaris 10 zone on a solaris 11.1 GZ
    root@exsolh0005:/opt/scripts# ./solaris-10u11-sparc -v
    This is an Oracle VM Template for Oracle Solaris Zones.
    Copyright © 2011, Oracle and/or its affiliates. All rights reserved.
    This software and related documentation are provided under a license
    agreement containing restrictions on use and disclosure and are
    protected by intellectual property laws. Except as expressly
    permitted in your license agreement or allowed by law, you may not
    use, copy, reproduce, translate, broadcast, modify, license,
    transmit, distribute, exhibit, perform, publish, or display any
    part, in any form, or by any means. Reverse engineering,
    disassembly, or decompilation of this software, unless required by
    law for interoperability, is prohibited.
    Version: 1.0.9.12
    root@exsolh0005:/opt/scripts# ./solaris-10u11-sparc -p /rpool -a 10.83.128.35/24 -i net6 -z testzone
    This is an Oracle VM Template for Oracle Solaris Zones.
    Copyright © 2011, Oracle and/or its affiliates. All rights reserved.
    This software and related documentation are provided under a license
    agreement containing restrictions on use and disclosure and are
    protected by intellectual property laws. Except as expressly
    permitted in your license agreement or allowed by law, you may not
    use, copy, reproduce, translate, broadcast, modify, license,
    transmit, distribute, exhibit, perform, publish, or display any
    part, in any form, or by any means. Reverse engineering,
    disassembly, or decompilation of this software, unless required by
    law for interoperability, is prohibited.
    IMAGE: ./solaris-10u11-sparc
    ZONE: testzone
    ZONEPATH: /rpool/testzone
    VNIC: vnicZBI83273795
    IP ADDR: 10.83.128.35
    NETMASK: 255.255.255.0
    DEFROUTER: 10.83.128.1
    TIMEZONE: Europe/Copenhagen
    Checking disk-space for extraction
    Ok
    Extracting in /opt/scripts/bootimage.8Ham6r ...
    100% [===============================>]
    Checking data integrity
    Ok
    Checking platform compatibility
    The host and the image do not have the same Solaris release:
    host Solaris release: 5.11
    image Solaris release: 5.10
    Will create a Solaris 10 branded zone.
    Checking disk-space for installation
    Ok
    Installing in /rpool/testzone ...
    100% [===============================>]
    Attaching testzone
    Problem attaching testzone.
    More details in /var/sadm/install/logs/solaris-10u11-sparc.log
    Cleaning up and exiting.
    Friday, May 10, 2013 03:18:01 PM CEST: cleaning up
    root@exsolh0005:/opt/scripts#
    root@exsolh0005:/opt/scripts# cat /var/log/zones/zoneadm.20130510T131756Z.testzone.attach
    [Friday, May 10, 2013 03:17:56 PM CEST] ==== Starting: /usr/lib/brand/solaris10/attach testzone /rpool/testzone -c /opt/scripts/bootimage.8Ham6r/sysidcfg.testzone ====
    [Friday, May 10, 2013 03:17:56 PM CEST] Progress being logged to /var/log/zones/zoneadm.20130510T131756Z.testzone.attach
    [Friday, May 10, 2013 03:17:56 PM CEST] Pinning datasets under rpool/testzone
    [Friday, May 10, 2013 03:17:56 PM CEST] Pinning rpool/testzone
    [Friday, May 10, 2013 03:17:56 PM CEST] Pinning rpool/testzone/rpool
    [Friday, May 10, 2013 03:17:56 PM CEST] Pinning rpool/testzone/rpool/ROOT
    [Friday, May 10, 2013 03:17:56 PM CEST] Pinning rpool/testzone/rpool/ROOT/zbe
    [Friday, May 10, 2013 03:17:56 PM CEST] Log File: /var/log/zones/zoneadm.20130510T131756Z.testzone.attach
    [Friday, May 10, 2013 03:17:57 PM CEST] Converting detached zone boot environment 'zbe'.
    [Friday, May 10, 2013 03:17:57 PM CEST] Unmounting /rpool/testzone/root
    [Friday, May 10, 2013 03:18:00 PM CEST] setting ZFS property zoned=on on rpool/testzone/rpool
    [Friday, May 10, 2013 03:18:00 PM CEST] setting ZFS property canmount=noauto on rpool/testzone/rpool/ROOT
    [Friday, May 10, 2013 03:18:00 PM CEST] setting ZFS property mountpoint=legacy on rpool/testzone/rpool/ROOT
    [Friday, May 10, 2013 03:18:01 PM CEST] Mounting boot environment in rpool/testzone/rpool/ROOT/zbe-0 at /rpool/testzone/root (including child datasets)
    cannot open 'ERROR: Error: Command <zfs list -H -o name -t filesystem -r rpool/testzone/rpool/ROOT/zbe-0> exited with status 1': invalid dataset name
    [Friday, May 10, 2013 03:18:01 PM CEST] ERROR: refresh of ERROR: Error: Command <zfs list -H -o name -t filesystem -r rpool/testzone/rpool/ROOT/zbe-0> exited with status 1 failed
    [Friday, May 10, 2013 03:18:01 PM CEST] ERROR: Error: rpool/testzone/rpool/ROOT/zbe-0: No such dataset.
    [Friday, May 10, 2013 03:18:01 PM CEST] Unpinning datasets under rpool/testzone
    [Friday, May 10, 2013 03:18:01 PM CEST] Unpinning rpool/testzone
    [Friday, May 10, 2013 03:18:01 PM CEST] Unpinning rpool/testzone/rpool
    [Friday, May 10, 2013 03:18:01 PM CEST] Unpinning rpool/testzone/rpool/ROOT
    [Friday, May 10, 2013 03:18:01 PM CEST] Unpinning rpool/testzone/rpool/ROOT/zbe
    [Friday, May 10, 2013 03:18:01 PM CEST] Result: Attach Failed.
    [Friday, May 10, 2013 03:18:01 PM CEST] Exiting with exit code 254
    [Friday, May 10, 2013 03:18:01 PM CEST] ==== Completed: /usr/lib/brand/solaris10/attach testzone /rpool/testzone -c /opt/scripts/bootimage.8Ham6r/sysidcfg.testzone ====
    Looks like a script bug..
    Regards
    Claus

    Hello All,
    I would love to know if someone has a solution to this as I am seeing a similar issue with a slightly different setup.
    Solaris 8 and Netra 240. I get the same result with and without patches and finish scripts. After the jumpstart and the failed boot attempt from disk. I can boot from cd, copy the glm driver from the cd to disk, and then everything works as it should. Obviously this is not a solution but only a work around.
    Is it something to do with the SCSI hardware architecture used in the *240s?
    Edited by: Gareth_Mann on Oct 2, 2007 7:41 PM

  • Multicast between zones in Solaris 10 3/05

    Hi
    We have a Solaris 10 3/05 installation, with different zones. We have written a pair of test programs to test multicast traffic between zones: one of them joins a given IP/port, and the other sends datagrams with dummy text to a given IP/port. We want to ensure multicast traffic between zones using 239.255.2.3, port 6155/6156 works seamlessly.
    We started trying that IP between different machines (with no zones, or between global zones in different machines), and it worked. Then we tried between a non-global zone and the global zone of the same machine, and it worked. But then we tried between different zones in the same machine, and it didn't worked: datagrams are not reaching other zones but the global one.
    �Any ideas about this? Using 239.255.2.3 is a must, and being a valid multicast IP, it should work out-of-the-box. All zones have an exclusive IP, and are in the same subnet (also the global zone).
    Edited by: E.Corral on Aug 22, 2008 5:49 AM

    The zones stuff is tightly integrated with much of the other OS infrastructure eg kernel, libraries etc.
    Its not possible to upgrade just the zones stuff by installing packages.
    You could upgrade the zones stuff by applying patches, but it will drag a lot of other stuff in as preqrequisites.
    Just installing a recommended patch set should accomplish this.
    But it may be simpler to just upgrade to 5/08 and be done with it. Liveupgade or upgrade install should work.

  • Probem in creating Solaris 10 branded zone on Solaris 11.0

    Hello,
    I'm creating a zone on HP Blade with Solaris 11.0 using VM template Solaris 10u10 (x86).
    I haven't /etc/defaultrouter file, my Solaris 11 is 11/11 and not Express version.
    The error shows that variable used for temporary directory is lost. It's very strange because I completed 5 installations in the same way without any problem. But two last just are stopping with this error:
    ./setupSysidcfgStaticIP[50]: America/Montreal/sysidcfg.VL-VM-LD104: cannot create [No such file or directory]
    cp: cannot access America/Montreal/sysidcfg.VL-VM-LD104
    chmod: WARNING: can't access America/Montreal/sysidcfg.VL-VM-LD104
    The "setupSysidcfgStaticIP" script is one of the many in the image which runs the creation of sysidcfg-file for the zone. It has 9 arguments to run:
    CONT=$1
    ZONEPATH=$2
    NIC=$3
    IP_ADDR=$4
    NETMASK=$5
    DEFROUT=$6
    PASSWD=$7
    TZONE=$8
    TMPDIR=$9
    The sysidcfg-filename is calculated as SYSIDCFG=$TMPDIR/sysidcfg.$CONT <- here is the error, the $TMPDIR fails
    After that the script creates the file and renames it:
    /usr/bin/rm -rf $SYSIDCFG
    /usr/bin/sed -e s/RzoneR/$CONT/ $_tktHome/conf/sysidcfgStaticIP |\
    /usr/bin/sed -e s/RnicR/$NIC/ |\
    /usr/bin/sed -e s/RnetmaskR/$NETMASK/ |\
    /usr/bin/sed -e s/RdefaultrouterR/$DEFROUT/ |\
    /usr/bin/sed -e s/Rip_addrR/$IP_ADDR/ |\
    /usr/bin/sed -e s]RtimezoneR]$TZONE] |\
    /usr/bin/sed -e s]RpasswdR]$PASSWD] >> $SYSIDCFG
    /usr/bin/cp $SYSIDCFG $ZONEPATH/root/etc/sysidcfg
    /usr/bin/chmod 777 $SYSIDCFG
    The tmpdir is created and used in main script but it fails in the subroutine. I don't understand why it was used before without any problem and now it fails. I spent yesterday about 6 hours to debug it but still don't have any idea how to fix it.
    I use the image solaris-10u10-x86.bin .
    I cannot use the newer image solaris-10u11-x86.bin (which works perfectly) because it isn't certified for our production and the set of servers needs to be installed with the same patch level.
    Any help will be appreciated!
    Vlad
    Edited by: 919435 on May 24, 2013 5:56 AM

    Problem found. To jumpstart last two HP Blades we used the copies of AI templates. When we did it from scratch and re-installed the Solaris 11.0 we have no more errors.

  • How to unlock Root Account in non-global zone on Solaris 10 Branded Zone

    Hello All,
    I have a phsical x86 server running Solaris 11. On top of that, I have 3 Solaris 10 branded zones configured. Due to security policy the root account has been locked by 5 failed login attempts.
    Is there a way by which I can unlock root account in non-global zone.
    I have the root access of global zone.
    Pls help as these are production servers.
    Regards

    Hey,
    It worked. Actually i forgot to save the file.
    I changed the /<zonepath>/root/etc/shadow
    Removed *LK* & then from global zone did zlogin -l root zonename
    Thanks  lot.

  • Ldom Primary Solaris11 with ldom Guest Solaris 10 containt a Zone Branded Solaris 8

    Hello,
    It is  possible on a Ldom Primary in Solaris 11  to make running a ldom guest in Solaris 10 witch containt a Branded zone Solaris 8
    It seem to be "Russian headstock" ........
    Tank you.
    Best regard
    Alain.

    Thank you
    have a nice Day
    Alain.

Maybe you are looking for

  • In need of memory?

    I'm having a bit of trouble exporting a movie from AE. My final output uses a normal DV compression (720x576). But in my project I'm using a comp that's like 6000x4000 pixels. When trying to make a movie I get the following error message: "After Effe

  • Cant view my iphone summary pane

    Nant view the details of my iphone...my laptop brokes so i plugged my phone on my desktop, but i cant view the details such as, version , name capacity and the rest at the Itunes summary...pls help

  • Transfer data from MS Excel to Oracle table

    Hello, hope someone can help: What is the easiest way to transfer data from Excel sheet to a Oracle table and how ? An example of a row to transfer is given below Date Time Value 1 Value 2 2004-02-02     03:47:39     9,62     3,62      Thanks in adva

  • Using my Apple TV to see programs on my TV set.

    My Apple TV tells me to turn on Home Sharing on my Computer through iTunes.  But this is already done.  I can play music from my iTunes through my Apple TV.  What is going on?

  • Partial Submit

    Hi, I want to do form partial submit without using any command link or button. i want to refresh 1 field. how to do that? I'm using Jdeveloper 10.1.3.1.0 ADF BC. Thanks and Regards, Sudha.