Moving all panels from left to right

I just installed Dreamweaver 8 on my new computer and the
panels come up on the left hand side. I want them on the right.
Dragging them to the right had no effect, just left them floating.
Please advise.
Thank you.

Nevermind, I figured it out - Edit, Preference, General,
Change Workspace, Dreamweaver MX Workspace, uncheck HomeSite/Coder
Style

Similar Messages

Moving a subject from left to right if shot in front of green screen

Here's my question:
If I shoot an interview with someone who sits right in front of a green screen in the middle, is there any way I can move that person, and that person only, to the left or right of the frame after it's shot? I have seen it in VH1 and it looks great. Do I have to roroscope? Would I have to shoot the interview 3 times in front of the green screen, One on the left side, One on the right side, and one in the middle?
Any help would be appreciated
Thanks in advance

Well, assuming that you are keying out the entire background, you're left with the subject pretty much just floating in space. So its pretty simple to just move your subject layer to either side of the frame, independent of whatever background layer you plan to put behind him/her.
Of course, as you move this person, their eyeline may appear as if they're looking at different subjects.
If you have no keyed out the entire background, I'm afraid you are left to play with masks.

Why does my Menu Bar is scrolling from left to right when I call it and not stabilizing?

I have an an XP Windows system and I use Firefox as my default Browser, I suddenly found that my browaer is hit by something that makes the Menu Bar when I try to use it scrolling all menus from left to right so quickly that I can't point to any choice and keep doing this till I end it by mouse, also the information in the Autocomplete are not accessible as they don't show when trying to get them either by mouse or by the down key. I don.t know what to do putting in consideration that I uninstalled firefox and reinstalled it and this did not solve the problem.

'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

Just recently bought an Apple Magic Mouse and noticed that it wiggles from left to right when I hold it a certain way. It does so ever so slightly so I'm afraid that it might be a defective product. I'm really careful and haven't dropped it at all.

Can anybody else replicate this issue? The top polycarbonate plate with the apple logo on top (not the aluminum part) wiggles from left to right ever so slightly when looking at it I noticed it does this. Not typical of any apple products I've ever owned.

Not quite with you, I'm afraid. Is it the mouse itself which wiggles or is it the cursor on the screen.
I really don't mean offence but the mouse ain't going to wiggle unless you have magical powers ... but the cursor may, if, for example, the batteries are not solidly seated or connected. Some are very sensitive and take getting used to.
If it is the cursor, you could try removing and cleaning all contact points and when you replace the batteries make sure they are tightly seated. Oh, and I forgot to mention; is the green light steady or does it flicker?
Message was edited by: seventy one

I have a hp 310 all in one from left to right it only prints 1/3

i have a hp 310 all in one printer and from left to right it only prints 1/3 of the page

Hi for49erdan,
Is your printer a Deskjet 310?
What are the ink levels ( in % full ) for each cartridge according to the printer?
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input ! ___________________________________ _____
Thank You,
Rich
Expert

How to Shift ToolBar(Search Box) From Left To Right

Hi All,
        I am trying to shift toolbar of Portal i.e Search Box from left to right.But it is not happening.How I do this?I do not want to upload PAR File also.
Please let me know.
Thanks,
Abhiram

Hi,
Follow this,
Import the PAR file into NWDS, the PAR you have downloaded is correct one, Now in the JSP folder, find ToolAreaView.JSP file, now find following lines of code in that JSP file
<DIV id="GroupElements" class="prtlToolAreaTaskCompAlign">
                    <TABLE border="0" cellspacing="0" cellpadding="0" >
                         <TR>
After this TR , add following code :
<td width="750">& nbsp;</td>
Thats it. With this your search field will be moved to right totally.
Regards,
Ameya
Edited by: Ameya Pimpalgaonkar on Apr 29, 2008 6:50 AM

While using ibooks how to change page swipe from left to right vs top to bottom

Somehow I changed a setting in my Ibooks to change page by scrolling from top to bottom of the screen. I want to have page turn by moving from left to right. I am using iPhone with operating 7. whatever is out at this day and time. Can anyone help? Thanks
Celestesyorkies.

tap the AA symbol at the top, the one for resizing text.
It will show a slider for brightness, font size, page colour, and on the bottom "scrolling view" off and on.
When the scrolling view is "on" (green) the book is read with a vertical slider and scrolling up and down.
When the scrolling view is "off" (no colour) the pages are changed by swiping left to right or right to left.

How to achieve Vertical Text,start From left to right?

How to achieve Vertical Text,start From left to right?
Maybe it does not make sense for English,but it is Quite useful for Chinese

@喜狼_edny – hm. Possible, but the result is somehow unsatisfactory.
See for yourself.
We could start with some text right aligned in a table with just one single cell:
We could rotate the cell to 270° like that:
Code:
var myCell = app.selection[0].tables[0].cells[0];
myCell.rotationAngle = 270;
And now we need the text direction from right to left and all characters rotated to 180°:
Code:
var myCell = app.selection[0].tables[0].cells[0];
myCell.rotationAngle = 270;
myProperties = {
    composer : "$ID/HL Composer Optyca",
    characterDirection : CharacterDirectionOptions.RIGHT_TO_LEFT_DIRECTION,
    paragraphDirection : ParagraphDirectionOptions.RIGHT_TO_LEFT_DIRECTION,
    characterRotation : 180
myCell.texts[0].properties = myProperties;
Result:
Ugh! Not exactly the result we expected…
(Tested with InDesign CS5.5 on OSX 10.6.8)
It's the characterRotation that is not working as expected.
Uwe
Message was edited by: Laubender

Plotting Data on a fixed time axis from left to right

I am plotting data on a Historical Trend graph from the DSC palette. I receive the data from a plc throughout the course of a production shift. I would like to have the start time of the shift (07:00) on the far left of the x-axis and the end time of the shift on the far right (15:30). I would like to plot the data from left to right as the shift progresses. Is this possible? How do I format?
Many thanks for any input,
Stuart Wilson

Hi Stuart,
All you need to do is place down a waveform chart and then modify the properties slightly in order to achieve this. If you right click and make sure autoscaling is turned off on the x-axis first of all, then go into the properties page and change the x-axis formatting to absolute time then you will be able to plot data with the actual time according to your system clock.
The only problem you have now is that there probably isn't enough room on the chart to plot data for the entire time between 09:00 and 15:30 depending on how often you want to sample. The default number of data points to keep in the chart is 1024. Therefore if you try and change the max and min values to 09:00 and 15:30 then it won't allow you to set that up as it doesn't think you have enough room there. Right click on the chart again and go down to Chart History Length. Increase this number to a large enough number and then you will be able to set the start time to 09:00 and the end time to 15:30 and as long as autoscaling is turned off this will not change.
Hope this helps, please find the attached example which will plot random numbers to a chart once a minute and the chart will plot data between these times.
Best regards,
Peter H.
Applications Engineer.
NIUK.
Attachments:
Large Chart.vi ‏16 KB

Shrinking a graphic from left to right

I am trying to transform a photo from 100% to 0% (which I
will want it to do slowly to reveal another photo underneath) and
only the width and not the height to decrease which I know how to
do but instead of both sides of the photo shrinking to the centre
of the photo (when using the free transform tool), I want it to
decrease to 0% from left to right - a bit like a slideshow moving
from left to right but the photo doesn't actually move, it just
shrinks starting from the left side to the right revealing the next
photo underneath. I thought this would be a simple thing to do but
I can't work out how to do it.
Thanks

You can do this by moving the center point of the picture.
Select the Free Transform tool and select the image and move the
little white circle (usually placed in the middle), and move it to
the right edge of the image.

Camera Raw crops my image from left and right

As you can see in the screen cap, camera raw inside AE opens my timelapse images cropped from left and right. I had this problem before in photoshop too, but never tried to fix it. I'm now in serious trouble and need to find a solution ASAP.

I'm guessing that you cropped in camera and when you shoot RAW the crop is honored but can be removed. I would use Lightroom. Set up a preset that resets the crop and process all of the frames and then export a png or if you want to do some advanced color correcting in AE, select any of the 32 bit image formats and render your resized images to a specific folder. Then import the images as an image sequence in Premiere Pro or AE and do the rest of the work. Importing an image at a time into AE and sequencing the layers in nuts...IMHO
One other thing, before you shoot any more images with this camera go through the menu and reset it to not crop your images.

Horizontal RSS feed- is it possible to create an RSS feed (showing both pictures and text), that scrolls from left to right rather than top to bottom?

I am trying to create an RSS feed that will scroll from left to right rather than top to bottom as is standard in iWeb. Ideally, I would like to show both images and text. I am actually using iWeb '09. I am not opposed to writing html code if necessary.
Thank you for your help!

Probleme solved without having to change anything in the flash.
The solution was to add a small part in the CSS in HTML
html {
overflow-x: hidden;
overflow-y: auto;
Solve probleme. All browser. VERY usefull to know !

Panning from left to right only

Hi,
I have a still image that I imported into my iMovie project. I was wondering if there was a way to do a pan from left to right with no loss in image size (i.e. no panning into the image).
I suspect, having tried to work with the Ken Burns, Fit and Crop functions, that this is not possible. But was hoping one of the forum users had cleverly figured out how to do this type of panning.
Thank you!

Open Automator
Choose File>new
Highlight Image Capture Plug-in, then click Choose.
In the Actions Variables panel on the left, click Photos
In the panel that appears next to the Actions panel, scroll down to Pad Images (choices are listed alphabetically), highlight, click save, then name it and save
When you want to use this plug-in, open Image Capture (I keep the icon in the dock), then connect your camera.
Next follow File>Import>workflow saved as the Image Capture plug-in
Click import and the images will be 'padded' as they are imported.
Hope this helps you get started at least.

Fading an Object in From Left To Right

I'm trying to simply have a "square" fade in from left to right. Kind of like a "wipe" transition. Using the Fade In/Out Behavior only allows the whole object to fade in from 0% to 100% opacity at the same time.
Anyone have any ideas on how I might accomplish this extreme quest of wizardry?
Thanks,
Ray

I'd like to add an alternative solution. Maxx's idea may give you more customization but my idea is a shade simpler: I'm not involving a true gradient, but feathering the mask instead.
Draw a mask around your object. It may need to be quite a bit larger than the object in question. You'll know that, once you start playing with.
Animate the mask's control points. I like to set the last keyframe first, where your object is completely visible. Then move the playhead to a prior point in time. Then set another mask keyframe. Now click on the upper right hand point of the mask, hold down shift, then select the bottom right hand point of the mask.
With these points selected, If you then click and drag on the line between these 2 points, the whole right mask edge should move as one. Peel this line all of the way left until your object disappears. If you push play now, the object should sort of "wipe on" from left to right.
One more thing: Mask feather. With the mask selected, the HUD should have mention of "Feather". You'll want to dial this up. But if your playhead is parked at the beginning of the animation or at the end, you're not likely to see anything. So move the playhead such that you're parked between your 2 keyframes, with the object about halfway exposed, then adjust the feather to your liking.
Again, here is where you'll need to determine if the whole mask needs to be larger because you really only want the object to be effected by this "growing right edge". You don't want to see the feathering on the other edges, probably.
Anyway, this is Just another way to skin a cat. Maybe this will help you out.

Lighter line passing from left to right

Hi! What is the term which describe the white line coming from left to right in the windows 8.1 start icon from the bottom-left corner of the screen and how I can add this effect to an image, if it's possible? Thank you!

Ok, so I experimented a bit about what you're trying to do and here's what I came up with. I think the key is to create a key (no pun intended). Think of the black text as a cut out instead of text. Then you can place a particle emitter behind the cutout and create your inner glow. Here's what I did.
Create a white rectangle to serve as your "background". Create a text object and type your text. Color it black and then group it to the white rectangle. Name it "text".
Place a luma key on the text group and have it key out darker. Because you have black text and an all white rectangle, only the text portion will key out.
Create a new group and place it BELOW the text group. Call it "fx". Hunt through the particle emitters until you find one that gives you the kind of glow you are looking for. I liked the looks of the: Afterburner, Cool, and Embryo emitters.
Adjust the colors to the particle cells to the color(s) you want to use (I recommend not making it all white because then you're text just disappears against the white rectangle). I used the Atlantic Blue preset and liked the way it looked.
Then keyframe or use a behavior to move the emitter from one side of the text to the other to give it the move you want.
Hope this helps.
Andy

Moving all panels from left to right

Similar Messages

Maybe you are looking for