Moving an Application to a Networked Computer

Hi everyone,
I hope you can help please!
I'm running a program called 'the specialist' on an imac... and would like to run it on a power mac g4 which is part of the same network. The program was originally located under /User/shared - so I copied the application file across to /User/shared on the other computer... when I attempt to run the program from the g4, it crashes (well the rainbow wheel just keeps on rolling)... so I was wondering if there was somewhere else I should look for other supporting files?
Also, when I tried to run the program on the imac using the g4 via the network it had the same problem.
Any tips please?!
Thanks!
Lauren

Lauren, I'm guessing that the '3 launches' probably refers to a trial phase used when evaluating the product after which you'd need to purchase it.
As to finding out where the other files are - well, you could do a Finder search (ask me if unsure how) and you may get some idea where other files relating to this application are, but this is assuming that they all have a name reference to the original product, if they don't then unless you know what to look for you simply won't find them all. Not having the original disk is a problem.

Similar Messages

JInitiator and network computer question

Hello,
Does someone have experience with running an Oracle Developer
Application on a Network Computer (NC) ?
I am a little bit worry about the jar files. Because a NC does
not have a local cache, I think the JInitiator is downloading
the jar files everytime you set up the NC. Not really a
problem when you have some NC's and a fast network, But what
when you have more than 200 NC's all set up the same time in the
morning ?
Bart.
null

Well, I'd like to bridge the LAN and WAN side for AFP through VPN. But I'm guessing that it'd be like opening my LAN to the whole Internet. That sounds like a BIG security hole. If some kind of extra security could be put in place... like making sure that the server won't even let AFP clients authenticate unless the user is authenticated through VPN... but I'm guessing AFP on each client doesn't check that with the VPN server.
Would the next best thing be to move the clients that need access from the WAN into a DMZ behind the VPN router but before the LAN router? That'd mean I need another router...

Some applications won't stop looking for network computer

I've got a problem that cripples some applications (Finale 2005) and slows others down (Appleworks). When I'm off my home network and I open a file, there's dialog box that says "Looking up '[a network computer].'" Whether or not I click "disconnect", the application continues to search for the network computer and I can't work with that file; in fact, I have to force quit.
It looks as if this becomes a problem if I haven't specifically logged out in the finder before quitting the application. In fact, I usually just close my laptop with applications running and take it with me to work. Is there a sequence I must follow with Tiger? I don't think this was an issue with Panther.

You do have to unmount any Network Drives when/before moving to another location.
I'm thinking the APPs that don't work right have some pref on the non-existing network drive/cpu, for instance, if they automatically open the last doc used.

I moved my applications folder to the desktop, but modified the applications in my dock, and now i have too many copies of the applications folder and cant get rid of them without being unable to use the applications :(

I moved my applications folder to the desktop when i first got my imac. now i want to get rid of it, but when i put it in the trash, it wont let me use the applications, even though they are in more than one folder. I am at a loss of what to do now cause i have two copies of everything. please help me figure this out.

Marisalynne wrote:
I have the applications folder in my harddrive and then the one that I moved to my desktop when I first got my computer.
Where was the one that you moved to your desktop before you moved it to the desktop?
I really don't understand what you're trying to say. If I have a folder in A, and I move it to B, then the folder will be in B. There is no duplication. I still have only one folder, only the location is different.
Furthermore, your desktop is on your hard drive. Everything is on your hard drive.

Inconsistent printing from 1 networked computer

Recently purchased and set up officejet 5742. Works fineprinting via wireless connection with 1 wirelessly networked computer but not with the other (both computers using same microsoft office student package).
Will not print from Microsoft office applications (Word, excel, powerpoint etc) When it does not print, there is no error message on either the printer or the laptop.
When it does not print, the printer activates when a file is sent to print, but then just sits there with 'loading' on the printer screen and the spinning circle. The device manager on the lap top says 'printing' but just stays there, after around 3 minutes the printer chimes and then goes back to its standard home screen and seemingly deletes the file from the printer queue as it no longer shows on the device manager.
I have attempted to uninstall/reinstall software, printing via a wired connection and have followed the scan and print doctor re: deleting print spool file contents.
Printing from web, google docs etc fine.

Hey there @SLweip , Welcome to the forums,
I understand you cannot print from Microsoft Office programs from one computer only however, you can print successfully from all other programs. As the printer prints from other programs, and functions fine with your other PC, the hardware is fine and there is no issue with the printer itself. The problem is software related and I suspect there could be an issue with Microsoft Office on the one computer only.
I saw that you have already tried a full uninstall and reinstall of the printer driver and software, which should have resolved any printer related software issues. You can also try running the Print and Scan Doctor. This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results and if that happens, let me know what the problem was. If the tool determines that the printer checks out okay, you can try posting this issue in the Microsoft Forums (below), or even uninstall and reinstall Microsoft Office on the one PC.
Microsoft Support Forums
MS Office Forums
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Connecting to a rmiServer application running on one computer through modem

I am new to java and want to develop an application which is accessible by dialing in through modem.
The architecture i want to develop is a access database and a rmi server application on my home computer and that to be accessible through my laptop using connection by dialing in through modem.
In this way is it possible to access or will i have to have a URL and a web server also running on my home computer.
I shall be very thankfull for any help in this regard.

Hai,
no, you don't need a Webserver for RMI. RMI is independent and uses the rmiregistry as backgroud application, which will open the TCP Port for the communication with your client(s).
If you dial into your machine, your client will get also an IP Address, so you can access your server.
Normaly you also have to configure the Server-IP for Modem-Dialin - at Windows 2000 Server you can look into Routing & RAS for this IP.
In this case, you have to access to your RMI Server-App through this IP and the Port specified by you for miregistry.
Greetings,
Sascha

My storage is mostly full of a category labeled "other." I'm out of memory to the extent that it won't even allow me to update apps. I have moved all photos over to my computer and my music streams through the cloud. Any advice on how to fix this problem?

My storage is mostly full of a category labeled "other." I'm out of memory to the extent that it won't even allow me to update apps. I have moved all photos over to my computer and my music streams through the cloud. Any advice on how to fix this problem?

http://discussions.apple.com/thread/3418045?tstart=60

I've moved my Aperture library to another computer, and masters are referencing an old path name. How can I update these references? Reloctating masters does not work in this case :(

I've moved my Aperture library from one computer to another using Finder.
I merged the library with one which was already on the computer.
Now, the photos I imported have reference to the old path name on my old computer.
How can I update these references as "Relocate Masters" does not work in this case?

Just one suggestion to be able to reconnect all at once:
Create a smart album containing the images with missing masters:
File -> New -> Smart Album, and add a rule: File Status is "Missing" (or File Status is "offline")
Then select the images in this album and go to the File menu:
and select: File -> Locate referenced File
If you are lucky, Aperture will reconnect all at once, if you point the first image version to its counterpart.

How can I test a RTP(send&receive) application on the same computer?

I an writing an application that lets one computer (A) sends a media file to another computer (B) and B receives it and play it.
But how can I test this application on the same computer
Eg.Transmitter: localhost 43000
Receiver: localhost 43000
It will retuen an error since the port number is alreeady used by another program.
I know if I test it on different computers, it should be fine, but how can I test it on the same computer?

JMStudio sends RTP packets from the same UDP port as the specified in the destination port, so you can't try it in the same computer. The examples provided in http://java.sun.com/products/java-media/jmf/2.1.1/solutions/index.html follow this rule aswell, but it's easy to modify it:
rtpMgrs[streamid]=RTPManager.newInstance();
localAddr = new SessionAddress( InetAddress.getLocalHost(),localDataPort);
//By deafault, in the examples, they use remote DataPort instead of localDataPort.
//You can specify localDataPort to any different free port number, or to
//SessionAddress.ANY_PORT if you don't mind the port number
remoteAddr = new SessionAddress(destIpAddr,remoteDataPort);
rtpMgrs[streamid].initialize(localAddr);
rtpMgrs[streamid].addTarget(remoteAddr);

How can I download the data to Application Server and Network Drive

Hi Experts
I am having problem with download the data to Application Server and Network Drive in back ground. its working in foregorund but not in back ground.please suggest me . Thanks for advance.
Thanks & Regards
Raghava

Hi Experts
I am using like this
P_Back is a check box on the selection-screen.
it_fihrst_out-its internal table
sy-batch -Program is running in the background
IF sy-batch IS INITIAL.
    IF p_back = 'X'.
      OPEN DATASET file_01 FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
      IF sy-subrc = 0.
        LOOP AT it_fihrst_out.
          TRANSFER it_fihrst_out TO file_01.
        ENDLOOP.
      ENDIF.
      CLOSE DATASET file_01.
      CASE sy-subrc.
        WHEN 0.
          WRITE: / file_01, / 'successfully generated.'.
        WHEN OTHERS.
          WRITE: / file_01, 'Unexpected error occurred.'.
      ENDCASE.
    ELSE.
      CALL FUNCTION 'WS_DOWNLOAD'
        EXPORTING
          filename                = file_01
          filetype                = 'ASC'
        TABLES
          data_tab                = it_fihrst_out
        EXCEPTIONS
          file_open_error         = 1
          file_write_error        = 2
          invalid_filesize        = 3
          invalid_type            = 4
          no_batch                = 5
          unknown_error           = 6
          invalid_table_width     = 7
          gui_refuse_filetransfer = 8
          customer_error          = 9
          OTHERS                  = 10.
      CASE sy-subrc.
        WHEN 0.
          WRITE: / file_01, / 'successfully generated.'.
        WHEN 2.
          WRITE: / file_01, 'Output Error: File still open'.
        WHEN OTHERS.
          WRITE: / file_01, 'Unexpected error occurred.'.
      ENDCASE.
    ENDIF.
ELSE.
    LOOP AT it_fihrst_out.
      WRITE:/ it_fihrst_out.
    ENDLOOP.
ENDIF.
This is the code .

I moved by iTunes files to an external drive because I was changing computers. I then moved the files to the new computer. My iPod is not linking with the files on the computer. What can I do?

I moved my iTunes files from my old computer to an external hard drive. I then moved those files to the new computer. My computer and iPad are not linking up (recognizing each other?). I installed the latest version of iTunes onto the new computer to see if that would help. It did not--I got the message that an iPad can only be linked up with one computer and the new download would not work with this iPod. So the iTunes' library and my iPod are not connecting, and I have no way of installing or removing new songs onto my iPad. What should I do to correct this?

Sorry, I had a typo. The last sentence should have read "iPod" (iPad): So the iTunes' library and my iPod are not connecting, and I have no way of installing or removing new songs onto my iPod. What should I do to correct this?

Can't print from a network computer to my HP Deskjet D2680 on a Windows 7 computer

I have an HP Photosmart 2610 all-in-one printer connected to my HP desktop computer via a USB cable. The computer is running Windows 7 Home Premium (64 bit). I downloaded the current software and drivers from Hp (364 MB). I can print to this printer from any other computer on my home network.   So far, so good.
Now the problem. I also have an HP Deskjet D2680 printer connected to the same HP desktop computer above via a USB cable. I downloaded the current software and drivers from Hp (101 MB i think).   I can print to the D2680 from the HP computer, but I cannot print to the computer from any computer on the network. The print request does not generate an error. Nothing happens. No print job shows up in the print queue on the HP desktop computer.
When I add the D2680 as a network printer on any of my other computers, the D2680 printer is seen. The Add Printer function knows that the printer it is a D2680 printer and sets up the correct printer driver. Everything appears fine, but I just can't print to it from any network computer.
I then tried to add the D2680 as a local port... no luck. I identify it as \\ computer-name \ share-name, where computer-name is the name of the HP computer, and share-name is the name assigned to the D2680 when I shared the printer. On the HP computer, user passwords are turned off and all sharing options are turned on. I also modified the D2680 security to allow full access from NETWORK.   When I ty to create the local port... Access Denied.
Does the D2680 support network printing? If not, why? If not, someone from HP should be demoted to the mail room for that decision. If so, it is not working. So what do I do? Take a sledge hammer to it, then go buy another printer?
So much for plug and play.   It's more like plug and cry.
Thanks in advance for your suppprt.
David

I found a thread about the HP Print & Scan Doctor software tool. I downloaded and ran it. It detected a conflict with the D2680 driver / software, so I uninstalled the driver / software. I then reran the software install, and now everything works fine.

Can't print to officejet 6500 E709a from networked computer

Today I've tried reinstalling my printer software multiple times and I still can't get the printer to print. "Print Test Page Fails." The printer itself works fine on the computer it's connected to with a USB. It works fine from my second networked computer when connected by USB. The second networked computer can see the printer on the network, and appears to be adding it correctly. It tells me is there and ready, but then gives me the error message when I try to print a test page. Nothing is appearing in the what's printing dialog box either. My network works fine with everything else. All troubleshooting has failed to produce any errors. I'm running Windows 7 on both computers, the main one a 64-bit and the second one 32-bit. A third computer on the network, in another room, can find and print from the printer. So.... any idea what's stopping me from getting this resolved? Thanks... Liz
This question was solved.
View Solution.

One final update to report... I almost abandoned the idea of printing to my HP printer from a network computer after receiving your last message. It still bothered me, though, that both Norton's firewall, which I intended to use, and the Windows firewall, which I thought was disabled, had been enabled when I installed the printer. As a final attempt, I made sure the Windows firewall was off, uninstalled the printer using the HP setup CD, and cleaned the Registry. Then I reinstalled the printer again, and WOW, it works! I'm posting this just in case it may help someone else who has had to rebuild their computer after a full system recovery back to factory status. My learning: Norton's firewall is not a problem, but Windows firewall needs to be all the way off. Thanks for all the help and time you took trying to get me up and printing again. Cheers... Liz

I moved Photoshop CS5 to my new computer.. Its not working.. What to do?

I moved Photoshop CS5 to my new computer.. Its not working.. What to do?

What is not working exactly?
Did it install correctly? Accept the serial number OK? Activate OK?

All functions in FUNCLIB record can be moved to Application Class?

I am new comer for PeopleCode. I find many functions are put into a work record, like FUNCLIB. I want to know if some logics only are able to be coded in work record as function due to some restrictions or convenience. If yes, what are the restrictions and conveniences? If not, any one function in one record can be moved to Application Class? Please help to answer. Thanks in advance.

My two cents on this is that the FUNCLIB_ convention is a legacy convention, which was rolled out prior to the existence of application packages. As one can imagine, there is a large effort involved in pulling out FUNCLIB_ code and re-directing all of the calls to application classes.
I work with application classes where possible; there are nice OOP features and things are more tightly defined e.g. you can't just define a bunch of variables and have the '&randomstring is auto-defined' messages appear during PC validation in an App Class.
If you are writing something new, then I would encourage you to use application packages and classes. If you are thinking of re-writing code that exists in a FUNCLIB record event, then you will just need to ensure that you've identified all the calls and so on.
Hope this helps
John

Moving an Application to a Networked Computer

Similar Messages

Maybe you are looking for