Moving an Exchange 2010 VM - Any Issues

I need to move an Exchange 2010 VM from one office to another. Using Live Migration over my WAN link is out of the question, Live Migration to a Windows 8.1 box isn't possible and bringing a host back to the original office is doable but a pain. So,
I would like to export the VM from the current host, transport it to the new site and import it there. Are there any issues with exporting/importing an Exchange VM that I should be aware of?
Thanks
Bert

OK, it sounds like I can try it, then.
I asked because I tried to do an export/transport/import of a DC and that failed miserably. I just wasn't sure if Exchange would puke if I tried it with it. I know that the process works fine with basic Windows boxed but beyond that, I'm not
sure.
Bert

Similar Messages

Moving from Exchange 2010 to Exchange Online: AD issue

Dear All,
Our company will moving from Exchange 2010 to Exchange Online and we have a on-premise WinSer 2008R2 for AD.
Currently, user have to login to our domain and use the same ID and PW to access their outlook.
1.If we move to Exchange online, do we have to do anything with our on-premise AD server?
2.If user prefer using only one ID and PW for PC to access domain and Exchange online, what should we do?
3.Is there any point or do we still need current on-premise AD server after we moved to Exchange Online?
Thank you so much for your attention and help!
Best regards,
Shiloh

Hi,
There are a lot of corrupted items. You can try raising the baditemlimit to 999 to workaround this issue
Get-PublicFolderMigrationRequest | Set-PublicFolderMigrationRequest -baditemlimit 100
To resumed the PublicFolderMigrationRequest
Get-PublicFolderMigrationRequest | Resume-PublicFolderMigrationRequest
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help.
Simon Wu
TechNet Community Support

Has anybody experienced missing sent emails after updating their iPhone to IOS 5.0? Mail composed on phone appears to send but is never delivered nor does it show in sent items. Using Exchange 2010. Any thoughts??

Has anybody experienced missing sent emails after updating their iPhone to IOS 5.0? Mail composed on phone appears to send but is never delivered nor does it show in sent items. Using Exchange 2010. Any thoughts??

@Satterp
Not sure if you were responding to me or OP - my iPhone is on 5.1. The OP at the time of writing was on 5.0.1.
Also, the OP and I had setup our Hotmail as an Exchange server (similar to IMAP), not POP3.

Mac Office 2011 Calendar Events Moving on Exchange 2010

Hello,
I manage a domain environment that is fairly small. It has Server 2008, Outlook Exchange 2010, consisting of two domain controllers and a hand full of other Server2008 servers. All of these are virtualized on VMware ESXi and running off of a SAN as well.
So that should give you a little idea of our configuration. The key issue that has been driving many people insane and I can't seem to find a resolution to is that Mac user's are having their Exchange calendar entries move. PC users are not having this happen.
I have instructed the users to be very careful about appropriate time zones when creating the events, permissions to not let anyone else edit them. This is still occurring and I can't seem to find an answer online as to why. All of the VM's clocks are good.
The end user clocks are set accordingly and I even began setting them static to where we are located. We have tried dissassociating the user's with this issue from their iPhone's thinking that maybe the phone was editing it some how through iCloud syncing
etc. None of this has worked. Any other ideas or solutions would greatly be appreciated.
Thanks.

Hi,
This forum focuses on questions and feedback for Windows-based Microsoft Office client. Since your query is directly related to Office for mac, I would suggest you to post in the forum of
Office for Mac, where you can get more experienced responses:
http://answers.microsoft.com/en-us/mac/forum/macoffice2011?tab=Threads
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Exchange 2010\Outlook Mail issues

Hi,
I am having some issues with mail disappearing and outlook not updating. The issues are:
When sending an email from Outlook it appears in the sent items for 30 seconds in Outlook and then disappears. It never shows up in OWA The email does send though. If an email is sent via OWA the email appears and stays in both OWA and Outlook. This is
happening in Outlook 2010\Exchange 2010
Updating issues on random folders in Outlook. This is happening on both Outlook 2013 and Outlook 2010 different users with the same Exchange 2010 back end.
Both users have cached email forced. I have tried rebuilding the mailbox locally.
Cheers,
Zac Avramides

Hi,
Thanks for your detailed information about the symptom.
It seems the issue is more related to the Outlook client since OWA works fine. I suggest we can follow the checkpoints below:
1. Rebuild Outlook profile.
2. Disable any third-party firewall or AV programs.
3. Run Windows in Clean Boot.
4. Run Outlook in safe mode by “Outlook /safe”.
What’s the result now?
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Andrioid 4.4.4 Galaxy S5 and Exchange 2010 / Active Directory issue

I have posted this here because I don't see a category for Exchange 2010 which is what we currently use and I am not sure where else to post it. Please redirect if needed. Thanks in advance.
I am an IT Tech and I am trying to connect my phone to my email using the standard email application on the phone, with no success.
I was convinced for a long while that it was my phone.
I tried everything I could with the phone and restricting background data and everything but nothing worked.
I type in the credentials and it accepts them and shows me the mailbox but then it never loads the mail and folders.
I must have gone through this process 100 times and occasionally I get a message saying the certificate is incorrect do I want to accept it anyway.
I view the certificate and it is for another domain. When that doesn’t happen I just get pushed from checking the server setting and then it moves right to the settings of the mailbox.
However I don’t get the warning like I did when I created a new mailbox and AD account.
Create new exchange mailbox/ AD account – This worked, but ultimately I want my current user name and mailbox to work.
I don’t want to move to a new one if I don’t have to – I created a new mailbox which intern created an AD account.
After this was done I attempted to sync this account with the phone.
It worked first time without a problem. After the phone checked the server settings it gave me the warning that I was going to have to let the server control the device like it always does.
It also made me accept the System Administrator settings.
I sent a test email to and from it with no problem.
There are other people on our server with Galaxy S5’s and other Android based devices and I have added mail to their devices just like I would my device and they have no problems at all.
I have matched up the mailbox settings and AD settings and everything is the same for the most part.
It is bound to be a little different because I am an IT Tech so obviously I have more than the others, but I don’t feel like additional security should not allow me to add to my mailbox to my device
Other things I tried through the process, with no success, in no particular order are:
Tried connecting my account from different devices
Disconnected and recreated mailbox
Deleted and recreated AD account
There is one thing I noticed in the security tab of the AD account, other people using our mail system and Android based devices have something called
Data Sync. That is some sort of contact in AD
I guess. I cannot find any information about it and when I add it to my security tab, it will not stay.
After I close AD and check back 15 minutes late it is gone.
I am trying to describe this the best possible way. Has anyone experienced similar issue?
If there is any further information needed feel free to ask.

Then I would firstly suggest visiting the Remote Connectivity Analyzer Website to check common availability to your mailbox. Just run through the test.
I ran this test as suggested two different ways. With my user name and password and then a second time with the mail server. Both times in failed all tests with the exception of the following three:
Attempting to resolve the host name in DNS.
Testing the TCP port 443 on host to ensure it's listening and open.
The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server on port 443.
All three of these passed. I am not sure what most of this means, but we have people in the company a variety of different devices that connect with no problem. For this reason I believe this problem is localized to my AD account or my mailbox,
I have matched up settings with people that I know have the same device and use it on a daily basis with no problem and can not find anything different.

Exchange 2010 calendar sharing issues

I am getting several reports of users not being able to open a calendar shared to them by their manager. I have checked the calendar permissions on their managers computer which all look like they are able to read it.
The manager is using Outlook 2013 to share out her calendar. the users are using various avenues, either on an iPad or through OWA. I'm at a loss of where to check for additional issues on this. Any suggestions or ideas for you brilliant people?
**Edit: forgot to mention we use Exchange 2010**
This topic first appeared in the Spiceworks Community

NEW DELHI: Chinese smartphone giant Xiaomi has completed its first year in the country. On the occasion, the company has launched 32GB version of its India-first smartphone Xiaomi Mi 4i. The 32GB version of Mi 4i has been priced at Rs 14,999.
The current version of Mi 4i has 16GB internal storage and does not support microSD cards for storage expansion. It is priced at Rs 12,999.
Xiaomi Mi 4i sports a 5-inch Full HD (1920x1080p) IPS display. Powered by a 1.7GHz Qualcomm Snapdragon 615 64-bit octa-core processor, Adreno 405 GPU and 2GB of DDR3 RAM, the phone comes with 16GB storage.
The phone has a 13MP rear camera with dual-tone flash and a 5MP front camera. It runs Android 5.0 Lollipop with MIUI 6 software skin running on top. MIUI 6 is now available in 6 Indian languages and supports Visual IVR...Read More
Read More

Exchange 2010 Active Sync issues

I know I've posted a lot lately, but the issues keep rolling in with this upgrade. Since upgrading to Exchange 2010, I have 2 users ( that have come forward thus far) saying they are unable to add exchange mail back onto their phones.
When I go into EMC to look at it and right-click on the uses it shows the option to manage mobile device. Usually when there is no device paired, that option doesnt come up. When I go into manage mobile device, it shows that there is no device
listed. If I run Get-ActiveSyncDeviceStatistics -Mailbox:"alias" I get the same result. It shows no device. I think this is locking the user out somehow from being able to add exchange back onto their mobile device.
I have also tried removing their email box from the server, then re-attaching it. I get the same results each time. They can add exchange to their phones, but when it tries to download mail it gets "Cannot get mail. Connection to the
server failed." Even after they were able to add their account into their phone.

Since you had ActiveSync devices on these accounts on the old system, the tools know those devices existed. However, you can't manage them until you connect through the new system. Is your Exchange 2010 system the one that handles the inbound
ActiveSync connections? Downlevel systems can't support any
mailbox connections to newer systems.

Exchange 2010 Outlook Anywhere issues

I have an Exchange 2010 cas server that works fine with OWA internally and over the internet, and Outlook Anywhere works fine internally. When I try to access it outside the office though, the authentication prompt just keeps coming up for any user I try
it on. I have used the connectivity analyzer, and it gives me what I've pasted below. I have disabled OA and uninstalled the RPC, rebooted and installed again and set it back up, with no luck. I've also tried both NTLM and Basic setups on the server side,
and they both give the same error from outside the office. I also have checked my firewall settings, and everything is good. The only thing I can think of is that my reverse proxy is causing an issue. We have RHEL 5 with apache doing reverse proxy. Everything
else works though, so I'm not sure why OA wouldn't?
RPC Proxy can't be pinged.
Additional Details
An unexpected network-level exception was encountered. Exception details:
Message: The remote server returned an error: (501) Not Implemented.
Type: Microsoft.Exchange.Tools.ExRca.Extensions.MapiTransportException
Stack trace:
   at Microsoft.Exchange.Tools.ExRca.Extensions.MapiRpcTestClient.PingProtocolProxy(String endpointIdentifier)
   at Microsoft.Exchange.Tools.ExRca.Tests.MapiPingProxyTest.PerformTestReally()
Exception details:
Message: The remote server returned an error: (501) Not Implemented.
Type: System.Net.WebException
Stack trace:
   at System.Net.HttpWebRequest.GetResponse()
   at RpcPingLib.RpcPing.PingProxy(String internalServerFqdn, String endpoint)
   at Microsoft.Exchange.Tools.ExRca.Extensions.MapiRpcTestClient.PingProtocolProxy(String endpointIdentifier)
Elapsed Time: 198 ms.

Hello
501 is an internal server error.
Please browse RPC virtual directory from outside, and see if you are getting a default response - Which should be a blank page.
If you are not getting a blank page, then you need to troubleshoot that first - May be re-install RPC over HTTP.
Let me know if you need any help
AkashG || For any further queries, please mark an email to [email protected] ||

Exchange 2010 Mailbox automapping issues after updated to Rollup 5 for Exchange Server 2010 SP3

Hi,
i have problem with Outlook Uses who have Full Access on other mailbox.
An authentication window pop up very time a user start Outlook.
If i remove the access everything is ok.
if i insert manual the mailbox everything is ok
The System was for 3 days ago updated to Rollup 5 for Exchange Server 2010 SP3
Before the update, was no issue.
i will appreciated any help
Thanks

Same issue here. Ever since we installed Update Rollup 5 for SP3 Exchange 2010 mailboxes that were auto mapped are not accessible. They all get the same error.
Cannot expand the folder. The set of folders cannot be opened. The attempt to log on to the Microsoft Exchange has failed.
What I have been doing is removing the users permission, then adding them back using the noautomap switch in Powershell. After doing that, the user manually adds the mailbox and all is well.
Just a note here, I suspect it may have something to do with the version of Outlook 2010. We are running an older version here. I think only SP1 with no other incremental updates. Office is up to SP2. Also, one of the users I was working with could not access
the mailbox no matter what we tried but she can walk over to another workstation and open Outlook and access the very same mailbox so that pretty much proves its software related particularly with Outlook.
I cannot reproduce the problem on a workstation (XP) with a newer version of Outlook.
This has been wearing me out and I suspected the Update Rollup all long. Now I am confident as others are having the same problem. If you find out anything on how to fix this other than the steps above, let me know.

Exchange 2010 ActiveSync Calendar Issues

We use Exchange 2010, SP1, RU6 in our enterprise. We are having many problems with calendar synchronization between Exchange and iOS 5.0.1 devices (iPad and iPhone). Is anyone else having the same problem? Anyone have answers. We opened a case with Apple and they told us that these are known issues with iOS 5 and they would be addressed in a future release. Anyone know when this will be addressed? Thanks.

48 hrs now since talking with Microsoft.
I agree it is an iOS issue but Microsoft can typically find a fix around the situation regardless of the root offender. The hope is that the events may still be tagged such that Microsoft may still be able to correct the events. Regardless, Microsoft has elevated the case two levels to correct the issue. This is much more than Apple has been willing to do. Their response thus far has literally been "let us know what Microsoft says". I am not necessarily working with Microsoft but more not working with Apple (for their dis-interest in the situation). Microsoft has been on the phone with us taking traces of email calendar activity to see what the underlying problem is.
I work in education and I have since halted all further deployments of iOS devices since the majority are administrative personnel and they would definitely be hooking into the Exchange environment. My recommendation has been to my student base is to also halt deployments if they are putting students into their Exchange environments.
Not that I am an Apple basher but I don't think Apple is ready for the enterprise. Now that I have moved to a Galaxy S II, I feel safer that I will not miss my meetings. i live by my calendar. My 4s in in my drawer for now.

Exchange 2010 address book issue.

We're using Exchange 2010 in our organization. My old database got corrupted so i created new mailbox and add existing users to it. Now the issue is, before users type other usernames in outlooks address bar and mail gets delivered to the recipients, now
they have to select users from "To" list in outlook and have to add them to the address bar, if they type the recipient name rather selecting from the list then the mail don't get delivered. What is the issue? Any idea why this happening?

Hi
As per the information and details provided by you, to solve the problem of address book in Exchange 2010, please follow these steps: -
Enable web-based distribution for the OAB to your client access servers
– If you are upgrading from Exchange 2003 to 2010, this step is a must.
Change the mailbox server that’s responsible for generating your OAB to an Exchange 2010 mailbox server –
This is important whether you are migrating to Exchange 2003 or Exchange 2007.
I hope this information will be helpful for you.
Thanks and regards
Shweta@G

Exchange 2003 and Exchange 2010 Coexistence Activesync Issue

Hello,
I am currently on the progress of migrating mails from Exchange 2003 SP2 to Exchange 2010 SP3. Before I can do actual migration, I need to make sure that OWA and Activesync works when Exchange 2010 becomes Internet facing.
Right now Exchange 2003 is Internet facing while Exchange 2010 is internal LAN only. OWA login from Exchange 2010 to a mailbox in Exchange 2003 works fine. However, trying to open a mailbox in Exchange 2003 from Exchange 2010 Activesync fails.
Activesync login from Exchange 2010 to a mailbox in Exchange 2010 works fine, as well as logging in from Exchange 2003 to mailbox in Exchange 2003.
Tests using AccessMyLAN ActiveSync Tester using Exchange 2010 as entry point are inconclusive. The test shows the app successfully contacting ActiveSync version 6.5 which is Exchange 2003, but results in "Activesync detected, but not correctly configured."
Tests using Test-ActiveSyncConnectivity from Exchange 2010 reveals Error HTTP 400 when contacting Exchange 2003. The cmdlet also shows it successfully contacting Activesync version 6.5 (Exchange 2003).
I have searched around, installed hotfix KB937031, enabled Integrated Windows Authentication on Exchange 2003 Microsoft-Server-Activesync, disabled Require SSL for Microsoft-Server-Activesync and exchange-oma, yet I still can't connect to a mailbox inside
Exchange 2003 through ActiveSync 2010. Website Multiple Identities for port 80 has been set correctly. Exchange 2003 has Forms-Based Authentication Enabled and is the one thing we haven't tried disabling yet.
We want to make sure everything works first, then make Exchange 2010 Internet facing, and finally do the mail migration. We do not want to migrate everyone in a single sitting. Please if anyone have ideas any help is welcomed!

Exchange 2010 will proxy ActiveSync for Exchange 2003. For OWA, it will redirect, so you need a legacy redirect URL. You can test all of this internally without changing your Internet connection. For ActiveSync you can use a WiFi connection.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

How many system mailboxes should be in exchange 2013 after moving from exchange 2010?

Hi, I am moving mailboxes from exchange 2010 to exchange 2013, I noticed that in exchange 2013, besides discovery search mailbox, there are other 5 system mailboxes.(especially, there are 2 x Microsoft Exchange system mailboxes) Please see the pic attached.
Does this look right? thanks

Looks perfectly fine - Why MS decided to name two of the five arbitration mailboxes the same (Microsoft Exchange) is unclear but it is what it is :)
In EMS:
Martina Miskovic

Exchange 2010 & Ipad Sync Issues

I have a user that started having problems syncing up his Ipad to his exchange account. He has an Android that he can sync okay. He syncs the Ipad okay but the Inbox shows that he has no email. So far he is the only one in our
environment that has reported any issues. About 3 weeks ago I upgraded our exchange environment from SP1 to SP3, this weekend I updated SP3 to rollup 5 which did not fix the issue. Here are some trouble shooting steps I have tried to no avail:
Deleted partnership from Exchange
Deleted phone account from OWA
Deleted account from Ipad and readded - will sync gets message "No Mail" in Inbox
I do notice that when he re-synced no partnership showed up in Exchange or OWA
Made sure Inheritable Permissions box is checked in AD
Get-CASmailbox information matches mine, mine works fine.
I can sync okay on my Iphone, I had him use my Iphone to sync his account and he gets the same "No Mail" message.
-Hector

Hi The device could be corrupted in exchange. Check out my entry below and see if it helps http://blog.theinfraguys.com/2014/04/removing-corrupt-activesync-device-from.html
Blog: Http://theinfraguys.com
Follow me at Facebook http://www.facebook.com/theinfraguys
Please remember to click “Mark as Answer” on the answer if it helps you in anyway

Moving an Exchange 2010 VM - Any Issues

Similar Messages

Maybe you are looking for