Moving an existing solaris10 and solaris9 system to Container

HI
Can you guide me how to move an existing solaris10 and solaris9 ( loaded with application) to New host in container
Thanks

Hi,
we can move solaris 8,9,10 OS and applications to existing Solaris 10 OS containers, with BrandZ concept and by creating flash archive of solaris 8,9 OS then, creating zone specify flash archive.
Thanks and Regards
Nageswar Rao
Sr. Specialist-Systems

Similar Messages

  • Can I use our PC with existing SCXI setup (conencted to a PC by PCI-MIO-16E4) and use one labview application to communicate with FP and SCXI systems at the same time?

    We have an existing PC with SCXI setup. can i plug in a PCI-485/2 card connected to a FP-1001 network, and get both systems to be utilized in a single labview VI?

    Yes, you can utilize both sets of resources (SCXI and FieldPoint) at the same time from the same VI.
    If you were using the SCXI RS-485 interface, the SCXI and FieldPoint system would have to be on separate serial ports. Beyond that, there should be no real restrictions on accessing both of them.
    Regards,
    Aaron

  • Just moved to new home, updated router and new system with Time Warner and now we cannot get the appl

    just moved to new home, updated router and new system with Time Warner and now we cannot get the apple any ideas?

    Castle15 wrote:
    just moved to new home, updated router and new system with Time Warner and now we cannot get the apple any ideas?
    Cannot get the Apple.. what?
    Model and actual device you are talking about?
    Apple covers a pretty huge range.. If you mean extreme.. did you reset it to factory and start over.. that is always necessary when you change a network. You cannot pick up a router from one home and network and plonk it into another and have it work.. aint gonna happen.
    You also need to power down any pure cable modem for 20min or so to get it to forget the old MAC address that captured the IP so the Apple ??? has a chance to work.

  • Moved /lib and hosed system

    As root I moved /lib to /usr/lib and when I tried to do an ln -s it tells me "bash: /bin/ln: No such file or directory" about the only command I can use is cd can anyone tell me the full path to ln so I can create the /lib to  /usr/lib symlink please? I can't even log in over ssh and the system is headless so I am hopping my putty session doesn't break.

    Please search the forums. There are a multitude of threads dealing with this issue.
    Closing to avoid further duplication...

  • Moving an existing SQL Express Database to SQL Server 2008 (included in SBS2011) help!

    I have software that uses SQL 2005 right now, but the database is close the max size (4 GB). I have SBS2011 installed and it includes SQL 2008 and SQL 2008R2.  I want to move the database to the 2008 version that can that can handle larger databases.
    I'm not an SQL expert, but have some experience with it.  What I need are some directions on how to make this change without causing any problems with the system, including setting up the SQL server so it will have all the same settings as the old one.
    This is a practice management software.
    Thanks in advance for any help.  Harvey

    Hi,
    I think you can upgrade SQL Server 2005 to later version of SQL Server rather than moving the existing database to another SQL Server instance.
    Upgrade SQL Server 2005 SP2 Express to SQL Server 2008 R2 Express and SQL Server 2005 SP4 SQL Server 2012 Express. And you will have maximum 10 GB per database.
    Make sure that your operation system is compatible with SQL Server
     version which you want to upgrade to. For more information, see:
    http://msdn.microsoft.com/en-us/library/ms143506(v=sql.105).aspx#SSE_x64
    It is possible to backup and restore the database on another instance and modify the database path in the software.
    You need to test it in your test environment first before making changes in the production environment.
    In addition, you need to consult with the software developer and see if there is any potential issue.
    Upgrade to SQL Server 2012 Using the Installation Wizard (Setup)
    http://technet.microsoft.com/en-us/library/ms144267.aspx
    Back Up and Restore of SQL Server Databases
    http://technet.microsoft.com/en-us/library/ms187048.aspx
    Thanks.
    Tracy Cai
    TechNet Community Support

  • I moved all my photos and videos from iPhoto to external hard drive and now can't play any videos. Please help!!!

    I moved all my photos and videos from iPhoto to external hard drive, then totaly formated my macbook and now trying to play videos of external hard drive, but they wont play and they in "quicktime containers" and really small in size (50 - 150 Kb). Please Help!!! My misuse will kill me if find out that we have no more videos from our honeymoon...

    I moved all my photos and videos from iPhoto to external hard drive, then totaly formated my macbook and now trying to play videos of external hard drive, but they wont play and they in "quicktime containers" and really small in size (50 - 150 Kb). Please Help!!! My misuse will kill me if find out that we have no more videos from our honeymoon...
    You may need to prepare yourself for a "World of Hurt" from your wife...
    Since the average 0.9 megapixel JPEG photo file of normal graphic complexity stored at a high quality compression setting is 125-135 KBs in size, I would have to assume any QT video files you created of more than a fraction of a second in duration were most likely saved as "reference" files to only be 50-150 KBs. Basically, a reference file is q QT (MOV) file that tells a video player how to play data that is still stored in its original source file container(s). For instance, you could trim and merge a number of files together and save the result as a "reference" file that takes up very little room on your hard drive. Or, you could post fles to a server and create a "reference" file that is small enough to be sent as an email attachment that plays the uploaded data on someone else's computer as long as they are connected to the Internet. Unfortunately, for these reference files to work, all of the resources referenced within the file must continue to exist in their proper locations in order to be found and played by the reference. Since you did not indicate what "but they won't play" really means here or how you actually "moved" your iPhoto library files to the external drive, I can only make some "educated guesses" at this point. (BTW: for future reference, iPhoto has a built-in function that allows you to copy your library to one or more back-up locations and then connect to them by default when iPhoto opens or switch source libraries at will within the opened application.)
    If you created reference files and saved them to an external drive, you should be getting an error message telling you the app needs to know where the source files are located so the reference file can re-connect to the resource data. If the original files were also saved, then simple navigate to the source files in oder to tell the app where they are now located. If the source files were deleted as part of the reformatting process, then you are up the proverbial creek whithout a paddle with little or no hope of doing anything about this issue. (I.e., reformatting and then re-installing a system drive usually means you would have little hope of recovering the specific "lost" data you want as there is always a good chance that some of the data segments were overwritten during the process.)

  • Moving to the new BT Mail system

    Hi,
    I have just received an email today and it looks like I will be moving to the new BT Mail system shortly.  So I am trying to ensure that I am all set up for it, but have two related questions I have not been able to find answers to ...
    1. I do not currently use the Yahoo web-pages, but my e-mail is instead forwarded to another account where it is merged with all my other e-mail from various accounts. Will this forwarding be carried over to the new system, or must I set it up again?
    2. The T&Cs worringly says that I must look at the BT Email webpage, otherwise my account will be suspended. What is actually meant by this as there are also instructions for collecting the email via IMAP and POP for PC programs or on a mobile device. How will people using email forwarding or a separate program/mobile be affected?
    With thanks
    Andrew
    Solved!
    Go to Solution.

    I do believe that BT Retail are starting to move existing customer's who email accounts are on the BTYahoo email system to the new BT Mail system provided by Critical Path from this month onwards (ie from March 2014 onwards)
    Though always be wary if you do recieve an email claiming to be from BT Retail or BTplc asking for your details or to verify your account.
    Link on how to check if the email you recieved is actually from BT Retail: http://bt.custhelp.com/app/answers/detail/a_id/919​1/c/346,6588,6595
    Anyway these links below should help you how to get ready for the move to the new BT Mail system and platform:
    1) How do I get ready to view the new BT Mail on a device or email program?- http://bt.custhelp.com/app/answers/detail/a_id/475​31/c/346/session/L2F2LzEvdGltZS8xMzkzODY1OTEzL3NpZ​...
    2) Moving to the New BT Mail
    - http://bt.custhelp.com/app/answers/detail/a_id/477​52/c/346
    and
    http://bt.custhelp.com/app/hub/c/346,6769#h=ImNhdD​0zNDZfNjc2OV82OTg2fGNvbD0zIg..
    jac_95 | BT.com Help Site | BT Service Status
    Someone Solved Your Question?
    Please let other members know by clicking on ’Mark as Accepted Solution’
    Try a Search
    See if someone in the community had the same problem and how they got it resolved.

  • MOVED: P7N SLI Platinum and Promise Fasttrack TX-4660

    This topic has been moved to Intel Core 2 Duo/Quad boards.
    https://forum-en.msi.com/index.php?topic=156761.0

    Quote
    if the on-board sata controller is set to RAID I receive a "Not enogh space to copy PCI option ROM [04:00:00]" error and the system boots normally from SATA. I receive no other messages for the Prmise.
    Quote
    there is not enough space in the MB BIOS to load the TX4660 BIOS.
    This is not about there not being enough space in "BIOS". It is about reserved address space in system memory.  Have a look at this:
    I have marked the reserved address range for Option ROMs in red (it is here labeld as "Add-In Card BIOS and Buffer Area"). The space is limited to 128KB and this limit cannot be changed because of general x86/PC compatibility guidlines that exist since the early DOS days and still exist today.
    This Option ROM Space that is reserved within a limited address range within system memory (128KB).  All invoked option ROMs have to fit in there (onboard RAID Controller Option ROM, your TX-4660 Option ROM, Video Card Option ROM, USB Controller Option ROM etc.).  They will, of course, not fit into that designated 128KB window and that is why you get this message:
    Quote
    Not enogh space to copy PCI option ROM [04:00:00]
    Quote
    - BUT! If you disable the on-board USB controllers and raid the TX-4660 BIOS is loaded and runs perfectly
    - I've finally added a third party USB controller and the system is still working...
    Well, it looks like you already found a workaround then.
    You could also check for a firmware update for your Promise FastTrack TX-4660, perhaps a different firmware version will reduce the size of the invoked Option ROM.

  • "Bookmarks and history system will not be functional" with corrupt files found by Avast and websites loading slow ONLY in Firefox

    Firefox is the only browser that lets me connect with my microphone. I need to use this feature for an online class. Earlier this evening, the message prompting me to allow or deny the class website permission to use the microphone stopped appearing, and without it the recording won't pick up any sound and I can't record anything.
    I tried exiting and restarting Firefox. I had some extensions in use at the time, in particular Session Manager. The allow/deny message still wouldn't appear, so I restarted my computer.
    Now when I open Firefox I see the "The bookmarks and history system will not be functional" error message. In addition, the browser loads websites extremely slowly; it takes several minutes to load each page or for me to be able to click on anything (the URL bar, the menus, etc) My other browsers (Internet Explorer and Chrome) are running normally and load websites at a normal speed. I tried downloading the latest version of Firefox but it didn't fix anything. I also tried restarting the computer again but that didn't help either.
    I ran my Avast software system check and it turned up that the following files under "C:\Users\(me)\AppData\Roaming\Mozilla\Firefox\Profiles\Irozixj7.default" are "corrupted and unreadable":
    -cookies.sqlite-shm
    -cookies.sqlite-wal
    -localstore.rdf
    -places.sqlite-shm
    There was one more problem on the scan, but it probably isn't relevant: for the file "C:\ProgramData\Microsoft\Windows Defender\Definition Updates\{9A2C6FA7-E04E-4819-B86A-8363A9D1E42A}\mpengine.dll" it says "The system cannot find the path specified." When I attempted to follow the path indicated, one of the folders (I can't remember which) said something along the lines of "You can't access this folder, do you want to permanently allow access to this folder?" I said yes and was able to access the folder.
    I have tried to add the Places Maintenance extension but the speed is too sluggish to download anything. Trying to access any of the menus results in the browser freezing for several minutes then unfreezing but with the menu still unopened. Therefore none of the solutions found here (https://support.mozilla.org/en-US/kb/fix-bookmarks-and-history-will-not-be-functional?esab=a&as=aaq) seem to work.
    My questions are as follows:
    -Is it possible to figure out what caused the problem in the first place?
    -Is there a way for me to fix it without losing my bookmarks and history?
    -How can I avoid this happening again in the future?

    First, I recommend backing up your Firefox settings in case something goes wrong. See [[Backing up your information]]. You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder. To quickly access this folder:
    Help > Troubleshooting Information > "Show Folder" button
    Next, keep this folder open, exit Firefox, and try moving the "corrupted and unreadable" files to a different folder. With the exception of localstore.rdf, which stores window positions, toolbar customizations, and other nonessential data, the other files appear to be session-specific files that hopefully are not critical. If you restart Firefox, does it behave more normally?
    If not, try creating a fresh Firefox profile. It will have the Flash plugin, which is the control sites usually use to connects your camera and/or microphone, and other plugins, but otherwise will be a new setup. This article has the steps for starting up in the Profile Manager: [[Use the Profile Manager to create and remove Firefox profiles]].
    If sites work normally in the new profile, you can import your bookmarks from your old profile, as well as copying over other files that don't seem to be causing the problem. Some trial and error might be required to determine that. This article has some tips: [[Recovering important data from an old profile]].
    If the new profile is no better, you can exit Firefox and use the Profile Manager to switch back to your original profile.
    Any improvement?

  • The Web template does not exist in the master system

    We are using a Web Template (ZPORTAL) as an access point to other web templates and to 0ANALYZER. We recieve an abort when the use logs on for the first time and is presented with the password change window. When they change the password and click ok, the following message is recieved: The Web template "ZPORTAL=" does not exist in the master system. After the abort, they go back to the ZPORTAL again in which case no abort occurs and they are able to navigate the web template. This only happens when they have to change their password. Has anyone else seen this?

    Make sure the template exists in the system which is configured in the iView property.
    There should be a one to one mapping between BI and EP systems.
    You cannot connect 2 BI system to one EP system and configure BI JAVA

  • How to change location for config files in WLS6.0 (like weblogic.home and weblogic.system.home in 5.1)

    Hi,
    I would like to point weblogic to a directory NOT under c:\bea\... for it's configuration.
    I used to do this on WLS 5.1 by setting:
    weblogic.home=/weblogic and weblogic.system.home=/projects/wlsconfig
    This way my config was NOT coupled to the weblogic install.
    I want to do the same thing, and have the config directory located in /projects/domainconfig
    for example.
    weblogic.system.home etc doesn't seem to do anything. The
    only variable that does anything is bea.home, but I need weblogic to find it's
    libs etc in /bea, but ONLY the config should be elsewhere.
    Any help would be great.
    Thanks,
    Dion

    From SP1 and beyond, you can use
    -Dweblogic.RootDirectory=<dirname>
    * The property for specifying configuration location:
    * The directory name of the domain from which to load the specified
    * configuration. The default is ".".
    * -Dweblogic.RootDirectory=<dirname>
    * The directory must exist.
    Dion Almaer wrote:
    Hi,
    I would like to point weblogic to a directory NOT under c:\bea\... for it's configuration.
    I used to do this on WLS 5.1 by setting:
    weblogic.home=/weblogic and weblogic.system.home=/projects/wlsconfig
    This way my config was NOT coupled to the weblogic install.
    I want to do the same thing, and have the config directory located in /projects/domainconfig
    for example.
    weblogic.system.home etc doesn't seem to do anything. The
    only variable that does anything is bea.home, but I need weblogic to find it's
    libs etc in /bea, but ONLY the config should be elsewhere.
    Any help would be great.
    Thanks,
    Dion[att1.html]

  • Adjustment of inventory between SAP and Legacy system

    Hi Gurus,
    Here is the scenario:
    1) One plant within a company code is in SAP and the other plant in a same company code is still in legacy. Since both of them are Not in SAP, I cannot do an STO.  But, ROH materials need to be moved from the legacy plant to the plant in SAP. I cannot treat the legacy plant as a Vendor, since we are Not paying them. But, still, we should make sure that the inventory needs to be devaulated by the monetary value of the goods taken out and the other inventory (plant in SAP) needs to be enriched by such monetary value.
    2) Similar situation as above, but between 2 Company Codes of same controlling area. Here one Company Code is in SAP, other is in legacy, but, when the other company code will be in SAP, it will be under same controlling area. The two companies are under one business. Some type of intercompany transfer (netting) needs to be done. Here, I have to treat the legacy company as a Vendor.(but modifying bank details)
    I understand, that it may not be possible in standard SAP, but what type of custom developments should I put up ? Any type of custom movement types? How should I set up the Vendor Master (in case of second scenario, the bank details to involve the netting thing).
    Any type of information is very valuable and I would be indeed very grateful.
    Thanks,
    Kumar

    For requirement 1, I suggest you keep track of the inventory acct for legacy and SAP system as separate acct to simplify reconciliation. Once this is done, you can use transaction MB1C movement 561 (or a copy of this movement type). This movement allows you to enter transaction amount in local currency as well; if this is not available, you can customize this through configuration for field selection of movement type (OMJJ). So through this posting, you can enter corresponding material, plant, quantity, and transaction amount that's passed from legacy system. In the account determination, you can set the opposite entry for inventory acct as the inventory acct from legacy system.
    You can then setup an interface that periodically extract GI txn on legacy system, and another interface that performs BDC or call transaction on movement 561 (or a copy of this movement) on SAP system
    Revi

  • Steps to to enhance the existing cube and get the data from r/3

    I am at entry level.
    if i want to enhance an existing cube and pull data from R/3 into the cube what are the main steps i do.
    in my scenario - this is SD module. The infocude is  custom cube(CONTRACT cube) . I have to enhance this existing custom cube with new info objects. The person who had created this cube years ago has used generic data source .
    Please explain me the main stepd i need to do in R/3 till i get it to BI

    check if you can enhance the existing generic data source to bring data for new info objects or if those fileds are aleady existing in the data source - if existing, you will have to make changes only in BW side, if not, you will have to first modify the generic data source
    if you have modified the data source, relicate data source at BW side
    create new info objects and add those to cube > activate info cube
    map the info objects with fields in data source > activate tranformation
    test it by loading the data
    now you will have to move these changes to produciton;
    move the data source changes to R/3 production system (if applicable)
    replicate data source in BW production system
    move the BW transports to production system
    you will have communicate to the uses that data will not avialable for some time or you need to reload data in cube in off business hours or on a weekend
    delete data from info cube
    initialize delta without data transer
    do a full repair to the cube
    now you can run delta on a daily basis
    I hope it helps.
    Regards,
    Gaurav

  • Diffebetween Business system and Logical system...

    what is the difference between Business system and Logical system...

    Hi
    Business system is a logical layer needed for configuration in integration directory. On the other site technical system is physical representation of your technical landscape. In case of SAP technical systems you can have more than one business system relation. In that situation there is relation one client to one business system.
    If your technical system changes, then you definitely need to point this new technical system to the existing Business system which has been used to do all the Configurations in the Integration Builder.
    Re: business system
    Re: business system
    Thanks

  • What is a R/3 system, logical system, and legacy system...???

    Hi,
    Please throw some light on...What is a R/3 system, logical system, and legacy system...???

    Hi,
    R/3 system is a normal SAP system that stores data.
    A legacy system is an existing computer system or application program which continues to be used because the user does not want to replace or redesign it.
    Logical System:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/c8/5aa2a0deb91548a1842f8485dee4a2/frameset.htm
    Technical System:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/24/8fa93e08503614e10000000a114084/frameset.htm
    Regards,
    Subhasha

Maybe you are looking for