Moving an image between chapters

I have having difficulty moving an image from one chapter to another in iBooks Author. I can't drag it beyond its own chapter and I can't copy and paste it as nothing is pasted. Any ideas anyone?

Have you tried simply using the original image to create the other placements instead...repeating the original process instead of c/p....?

Similar Messages

  • Image size changes when moving an image between Lightroom and CC.

    Image size changes when moving an image between Lightroom and CC.
    I opened a .dng image in LR and then opened it in the Develop module.  I clicked on Crop Overlay and then on the ‘As Shot’ drop down menu (the lock is closed) and cropped to 11 x 17 and clicked ‘Done’-.
    I click Cntl-E and the image opens in CC.  There I click on Image > Image Size and the Image Size  is 13.288 inches by 20.533 inches.
    Why does the image size change?
    I believe there is a menu to control the size of the image and I've looked everywhere I can think of in LR and CC, I googled various descriptions and I checked two of Scott Kelby's books, but I just can't figure out how to keep the image a consistent size when moving between LR and CC.
    Help!...Please?

    The penny will drop soon or maybe the cloud will lift.
    In Lightroom all editing is undoable/nondestructive.
    Hence a crop of 3x2 is not inches, centimetres, pixels or anything else. It is jst a ratio. When a file is exported, either to PS or disk, then the crop ratio has size determined in respect of pixels and inches or cms.
    So my 6000x5000 pixel image I will crop to 3x2 that leaves (before exporting) a 6000x4000 file.
    Now when exported it can be set to export at
    100pixels per inch and will end up at 60x40" when printed.
    200pixels per inch will end up at 30x20"
    300ppi will end at 20x13.3"
    You will notice in the Crop Tool there are no size denominations such as inches or centimetres as an image file only has pixels and the determination of size is done through exporting or printing.
    Hope that helps somewhat..

  • Audio problems when moving between chapters

    My movie consists of imported video from my camera. I have a two songs playing over the video - one at the beginning of the first chapter and one at the beginning of the last chapter. When I play the movie straight through, the audio works perfectly fine. When I skip between chapters the two with songs play correctly. However the chapters that have the original audio are distorted - the video seems to pause or stall out and the audio doesn't play for several seconds. Does anyone know what my problem might be and how to fix it?

    SteveG, I don't believe it is an 1820m issue at all. Do you have a single or multi-core processor? This behavior did not occur on my old P4 3GHz system. I only started observing it when I built this quad core system about a month ago.
    By the way, today I replaced my mobo with one of the same brand and model and the behavior still exists (to rule out a defective mobo.) I've also tried 3 different video cards (although they were all NVIDIA) and the problem remains no matter which card I use.
    Durin,
    As I was typing the first post, I verified that I was using the Emu 1820m ASIO driver in both Edit and Multitrack views. (As I was writing it, it crossed my mind that I might have it set to something else in one mode.) However, it is the same in both.
    One thing I forgot to mention is that there is one more app that behaves similarly (Reaper). All other apps (Sonar, FL Studio, eXT, Ableton Live, Sound Forge, Wavosaur) do not show this behavior and are rock solid.
    If you'd like to see my thread about this behavior in Reaper (and others who can reproduce it) see here: http://www.cockos.com/forum/showthread.php?t=19036
    I believe Sonar, FL Studio, eXT, Ableton Live, Sound Forge, Wavosaur, etc.. are doing something properly when playing back audio and/or initializing plugins that Adobe Audition and Reaper are failing to do properly with certain hardware configurations.
    -Clayton

  • Moving pages between chapters

    I just started using iBooks Author and when I imported a Pages file each page in iBooks Author is on a different Chapter.
    Is there a way to fix this so each page is NOT on a  separate Chapter.
    Also is there a way to move pages between Chapters.
    thanks

    You can not rearrange pages or move them from one chapter to another. However, you can move (or copy/paste) sections.
    Go to... iBook Menu... Help... iBooks Author Help... Set up your book... Add, reorder, or delete chapters, sections, and pages.
    From the iBook help menu:
    In the Book pane (shown above), do either or both of the following:
    To change the order of chapters: Drag them.
    To change the order of sections: Drag a section to a new location. You can also drag a section from one chapter to another.

  • Moving images between folders

    Provide an easy way to move an image between Lightroom folders with LR updating the database information on the image location. I have been told you can simply drag and drop but the process is not intuitive and I am cconcerned that I am going to lose an image in the process.

    You can simply drag and drop. And Lightroom moves the images on the drive to reflect this. Unless you actually remove or delete the image by hitting delete, it will remain in the Library.

  • Moving images between libraries

    In OSX and Lightroom 2, how to I move images between libraries?  I know that probably sounds like a dumb question, but I am a total LR2 newb.  I know I can move an entire library folder into another library folder, but what if I just want to move selected images from one library to another?
    Thanks in advance!

    Open a catalog and choose FILE...IMPORT FROM CATALOG. Choose the other catalog and then select the images you want. That will copy them into your catalog. If you don't want them in the second catalog then open that one and delete them. Just choose the remove from catalog option since you want the image source files to remain on your drive for the other catalog to reference.

  • Pausing between chapters in DVD Pro

    I would like to have my finished DVD pause automatically pause between chapters, then resume when I press play on the controller. Simple concept. Can I set that up in DVD Pro or is it done in FCP? Thanks

    I set chapter markers at the beginning of each section. There are 5 sections with a transition between each one. I put the chapter marker in the center of each transition where the image was black.
    To create a pause in DVD Pro I selected a chapter marker which activated the navigation menu where I could select Playback Options. Under Playback Options I selected 'Pause after each VOBU'.
    That didn't seem to work at first until I selected 'Wait: Infinite'.
    It worked perfectly in my Simulator. I was thrilled. I burned the DVD without making any other changes and then had the problems on the finished DVD. Should I save the project or something before burning? That's where I am. thanks for your time!
    Les

  • Moving Master Images after Facebook Upload

    I'm using a fully updated version of Aperture 3 and ran into a problem today moving master images that I have not experienced before.  My normal workflow is to batch import images from my camera every few days in one large import, so I often have multiple subjects in every batch.  For my 9 months with the program I have always downloaded everything into a temporary holding project I literally call "Hold".  When I get the time to do a detailed review, I then delete what I don't want and move (drag) the master images I want to keep from "Hold" into other subject-matter-unique projects across the library.  This works for me and has worked flawlessly until today when I downloaded about 20 images.  What I did differently today was I took things out of my usual order and decided to quickly upload 3 of the images from the "Hold" folder to Facebook using the Aperture Uploader.  The upload went fine, as it has in the past, but the problem surfaced when I then tried to move all the master images out of "Hold" to my permanent library file (project) structure.  The 17 images (which were not uploaded to Facebook) moved out to their new projects just fine, as always, but the 3 masters which were the source for the Facebook upload will not allow themselves to be moved out of "Hold".  When I drag them to the intended project, Aperture copies them into that project, but the original stays in "Hold."  Of course, if I try to then delete what is in "Hold" (with a copy safely filed away elsewhere in the Library) I get the warning that I am attempting to delete a master upon which other versions are dependent (to include "Facebook albums" it says), and all will be deleted.
    My take on this is the Facebook upload from "Hold", and the resulting versions created in the Facebook album (far bottom entries on the Library listing), now make "Hold" a permanent home for those associated master images.  Is there some way to get around this and actually move the master images to where I want them to be AND to de-clutter the "Hold" folder?  Or does this mean any use of Aperture's very handy (at least to date) Facebook uploader permanently glues a master to whatever project it was in when it was uploaded, never to fully and completely move again?  Thanks.

    I just made a test of this, and can confirm the apparent behavior.  However, I examined the Masters folder in the Package of the Library (and I have a Managed Library) and I believe there may be some referencing between Projects taking place.  The same appears to result where you have created a slideshow.  In the Facebook album and in the Slideshow album, the file info reports the master file name -- in my case the xxxx.NEF file, which clearly none of them really are, but rather some version. 
    I will try to do a more precise test where I can measure the size of the Masters folder to see if the "Move" adds to its size by an amount equal to the size of the Master file.
    Interesting!
    Ernie
    Message was edited by: Ernie Stamper

  • Draw image between edges in another image

    HI
    i try to draw an image between a specified edges in another image
    can any one help me and provide me with a code that perform this task

    elsabry wrote:
    HI
    i try to draw an image between a specified edges in another imageHow are the 'edges' specified? It is easy to draw one image, then another over the top that has areas of transparency.
    can any one help me and provide me with a code that perform this taskWhat have you got so far? Note that these forums are not a 'code generation machine'.
    BTW - To help your reader, please put a single upper case letter at the start of every sentence, and a full-stop (or question mark, or exclamation mark) at the end. This helps the reader to quickly scan the text, looking for ways to help. You would not want to make it harder to help, would you?

  • Moving multiple images

    I'm using RoboHelp 7.02. I have several images that were
    imported into various help files at the top level. This really
    clutters up my Project Manager, so I set about the task of putting
    all those images into an Image folder.
    I was happy to discover that moving an image in Project
    Manager updates the links in the topics. But, I cannot select
    multiple images. Is there a method unknown to me for selecting
    multiple images so I can move them into the Images folder while
    updating the links in the topics?
    Kevin

    As above, it is not possible.
    The more people who report a bug or request a feature, the more likely it is to be actioned. Please follow this link.
    http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Adding image between string

    How to add a image between two string.
    example
    Test string one <IMG> testing string two

    An empty loop to wait for something is to avoid in all languages! At worst, put a sleep call in the loop. But a better idiom for JavaFX would be:
    function ChangeImage(image: Image): Void
        fadeOut.action = function()
            selectedImage = Image
                url: fileURL;
                height: 400, preserveRatio: true
                backgroundLoading: true
            var progress = bind selectedImage.progress on replace
                if (progress == 100)
                    fadeIn.playFromStart();
        fadeOut.playFromStart();
    }(untested)
    First, I create the Image when needed, to start the background loading. Or maybe the loading is very long and you prefer to start earlier, so your version is fine in this case.
    Second, I do what I described, binding to the progress variable of selectedImage, and watching the updates. And when we reach the wanted value, we start the second animation.

  • How to add image between two string

    how to add a image between two string .
    example :
    String one <IMG> String two

    grid1 = new GridLayout( 2, 3, 5, 5);
    container = getContentPane();
    container.setLayout(grid1);
    The parameters in GridLayout specifies 2 rows, 3 columns, 5pixels of horizontal gap, 5pixels of vertical gap.
    Did what i could to help, now can somebody help me with JDialog? =(

  • Drag & Drop Images Between Tabs?

    Hi, Forgive me if I am missing the obvious but I need some help.
    Just got myself an iMac and I am in the process of getting it set up how I like it, Made the move from a Windows PC where I used the FireFox browser.
    My plan had been to just use Safari on my Mac to take advantage of all the good things like handoff, keychain etc with my other iOS devices.
    Now here is my problem, I use eBay a lot and I upload extra photos to hosting sites, then drag and drop them from that tab into the description on the eBay tab.
    However Safari does not seem to allow this, When trying to drag the images between tabs I just get a green + symbol which replaces the tab whereas when I use FireFox to do the same the other tab essentially "opens" allowing me to drop the image in.
    Is there anything I can do to fix this or a work around? I have tried the "Copy image" option but when I paste it in I just get a broken image picture.
    I should say the OS X version of FireFox works fine so it must be something to do with how Safari handles it.
    Hopefully somebody can advise?
    Many Thanks
    Craig

    I have found a slight work around in that if you use a new window instead of of a tab, then shrink it down you can drag and drop images.
    But surely there has to be a way to do it between tabs?
    Basically I am looking for a way to have the tab open when it is hovered on instead of the green + button appearing...

  • I can't drag an images between not floating frames

    Hello i have the newe Elements 12.
    It was working perfectly, but after the last up-date there was a problem.
    Ican't drag images between not floating frames anymore. this was possible before the up-date.
    now the images can only be draged if one is a not floating frame and the other one is a floating frame.
    does some one know how i can change this?

    No fix. It's a bug introduced with the update. Using floating windows is the only work-around.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • Drawing moving GIF images?

    Is it possible to draw moving gif images on a simple Frame applet?
    I made an image drawer class for my applet and i can draw simple 2d images.
    Here is the basis of my GameSprite class;
        public byte[] pixels;
        public int width;
        public int height;
        public GameSprite(String imageName, int requestIndex) {
         try {
                    // Removed code, it's zipInputStream, but it can be used just as ./image.jpg etc
         javax.swing.ImageIcon icon = new javax.swing.ImageIcon(fileBytes);
         width = icon.getIconWidth();
                     height = icon.getIconHeight();
                     pixels = fileBytes;
         } catch(Exception e) {
              e.printStackTrace();
        public void drawSprite(int x, int y) {
         try {
              Image image = Toolkit.getDefaultToolkit().createImage(pixels);
                                    //Removed code here
              graphics.drawImage(image, x, y + 7, width, height, observer);
         } catch(Exception e) {
              e.printStackTrace();
        }If i try to draw an animated gif image it dosn't move.
    Thanks for any help.

    In Java you need to override the paint method in AWT and paintComponenet method in SWING to do graphics/animation. If you go to an offscreen rendering, then you can paint to the graphics context of an image you use for a drawImage in your paint/paintComponent...
    If you where overriding a Panel in AWT you would override paint:
    public void paint(Graphics g){
      g.drawImage(im, 0, 0, this);
    }Then where you are maipulating your graphics you would do something like this:
    //code snippet
    Graphics g = im.getGraphics();
    //make what ever changes to im by manipulating the graphics context g
    repaint();

Maybe you are looking for