Moving an iWeb project from one computer to another

An iWeb web-site project I have been working on for years needs to be moved from one computer to another. The iWeb project currently resides in iWeb 2 on a G4 iMac running MacOS 10.4.11. I'd like to move it to my MacBook Pro so I have access to iLife 2009. What steps do I need to take to complete the transfer?

What steps do I need to take to complete the transfer?
Search the forum. It's discussed almost daily in different wordings.
Or read the help :
!http://www.wyodor.net/_Discussions/WhereiWebFile.png!

Similar Messages

Transfer iWeb project from one computer to another

I was just wondering if there is any way that you can transfer a iWeb project from one computer to another. I built a website at home on my MacBook and want it on my iMac at work so I can modify it there as well. Can this be done?

Often asked. Often answered: [Transfer domainfile|http://discussions.apple.com/search.jspa?threadID=&q=transfer+domain file&objID=f1193&dateRange=last90days&userID=&numResults=15&rankBy=10001] and [multiple computers|http://discussions.apple.com/search.jspa?objID=f1193&search=Go&q=mult iple+computers]
From the iWeb Help
!http://www.wyodor.net/_Discussions/MoreThanOneComputer.png!

Moved iMovie 09 project from one computer to another - now timing is wrong!

Hello,
I wanted to copy some Events and Projects from my Dad's older MacBook Pro to my iMac. So I just copied the event folders (from <Home Directory>/Movies/iMovie Events/) and the project files (from <Home Directory>/Movies/iMovie Projects/) to the corresponding folders on my iMac.
I then opened up iMovie on my iMac and saw that the Events and Projects were there. So far, so good.
The first problem I noticed was when I exported one of the projects from my iMac using QuickTime. The duration of the resulting .MOV file was about 30 seconds shorter than the duration of the project!
I watched the Project in iMovie, and found that the clips in the Project were 'cut off'. For example, the clip in the Project would say it was 10 seconds long, but when you played the Project the clip was only 7 seconds long.
How could this be? Is the speed of the Project somehow tied to the computer that created the project? i.e. perhaps the speed of the processor could impact this? I highly doubt it, as it would make it impossible to move projects from one computer to another.
Bottom line - the identical Project file on my iMac (with the same underlying events) will produce a different exported movie file than the exact same Project file on my Dad's laptop. Specifically, my version will be shorter and the clips will be cut off.
Any ideas would be greatly appreciated....

The macrumours link just telss you how to move the events which is relatively straightforward.
Alot of advice just seems to rest with leave the projects on your internal drive as they don't take up much space.
However, http://karsten.schluter.googlepages.com/im08tricks has a description of how to move the projects and then 'fool' imovie into where the projects are stored.
Not very flexible but it does allow you to 'clear' your macbook yet when you restore the sym-link file to the right place and restart imovie you can reconnect to all your old projects and events without yellow triangles of death appearing.
By the by apple needs to sort this out as archiving old projects and events together and preserve the editing is a really basic requirment I think.
PS anyone found out how to merge projects yet? Another basic function that seems to be lacking.

Moving a print project from one computer to another

Why does Apple not design the software where you could work on a project on Multiple apple devices. You would think with the Cloud the database could reside the and then work on it from any mac you own.
Please tell me I am wrong and you can move a print project (Book , Calendar) from one Mac to another without moving a whole library.

What App is it?
If iPhoto I thought that was what iCloud was all about???

Moving and Exiting Project from one computer to another

I started working on a project on my Mini and I want to continue and work with it on the MacBook Pro. How do I move the already edited images as a project with all the corrections to the other computer. When I move the hard drive over to the new computer and import only the master images are imported? I would like to continue with the changes I have already made.

easy ...
export the project from aperture ... transfer said project to MBP and import it or drag it into the aperture window ...

Moving iWeb project from one computer to another

Where does iWeb store locally the project?
I'd like to move it off my old computer and onto my new one if possible - thanks!

Hi Edward,
See these notes:
http://web.mac.com/mark8heaton/iWeb/SameSiteOn2Macs
Hope this helps!

Moving my FCP project from one computer to another

I would like to break down a load of footage into subclips on my laptop (footage on external drive) and then move everything to
my desktop (and a different external hard drive).
I know I can transfer the FCP file to computer No2 along with the original downloads to external HD No 2, but is there a way for me to do that without having to reconnect each subclip one at a time?
Please let me know if there is a workflow that I can use, so that i don't have to reconnect each subclip one at a time.
Thanks
mp

If you copy everything to HD No2, but give HD No2 exactly the same name and folder structure as HD No1, then FCP just accepts it as the same drive and will work without the need for reconnecting anything.
Rienk

Moving iWeb data from one computer to another

I have an iWeb site on my old mac lap top. I can not get the data to transfer to the new laptop. How do I move all iweb entries from one computer to another?

I would say that if you created pages in iWeb, your ability to do this originated from a basic Domain file, and it is there, in your computer, somewhere. I have seen cases where it appeared as though work that was published to a folder and not 'saved' in the application didn't make it into the Domain file, but I haven't been able to replicate this situation.
Spotlight "Domain", and see what comes up. Also, make sure you are looking in your Home Folder location, not your main HD library.

What is the easiest way to transfer a large imovie project from one computer to another in a different location.

What is the easiest way to transfer an faairly large HD imovie project from one computer to another in a different location. Can you export to drop box? Will the other computer need the exact imovie version?

OK it depends.
If you have a finished movie, you can SHARE/EXPORT MOVIE and create your final movie. Then, depending on the size of the finished movie, you can transfer via dropbox or similar service. Ninety minutes is a very long movie for iMovie, but it may work for you. I would suggest 720P to keep the size down.
If you need to transfer the entire iMovie Project so it can be edited in iMovie at the other end, then you need to transfer the project and event assets to an external hard drive and get the hard drive to the other location.
Directions are here. Follow the directions for 1) Moving or copying Project to external drive. Then 2) Consolidate Media.
https://discussions.apple.com/docs/DOC-4141

Need help coping project from one computer to another.

I need help coping project from one computer to another. I loaded all video on computer 1, copied events and project folder to computer 2. I was told I only needed to copy the project folder back to computer 1 since the events folder is already there. I copied project folder back to computer 1 but the files wont open. I dont have computer 2 available.
Please help!!!

Hi
No that's not the way to do it - iMovie gets confused and in some cases the problems might be un-repairable.
You've got several problems
• iMovie'08 - CAN NOT MOVE PROJCTS - You NEED iMovie'09 or iMovie'11 - I see no other working solution
• Never MOVE or alter any folder named
iMovie Projects - or -
iMovie Events
on DeskTop/Finder - This might be very harmful
• Moving (Projects) and Events - HAS TO be done within the iMovie Application.
You've got an Evets window and here You can view Your Events in two ways - Yearly - or - Yearly per Hard disk
Here You can move within this "window" to another location
• Projects - NO they do not contain Your full movie - only a document on howto use the material in Event folder
and there might be worse if You added Photos from iPhoto and Audio from iTunes/Garageband - then You have
to get this over to the second Mac too, to be able to continue editing.
So to move Your projects to another Mac You need
• iMovie'09 or 11
• an external hard disk -
MUST BE Mac OS Extended formatted - as UNIX/DOS/FAT32/Mac OS Exchange will not work for VIDEO
Should be a FireWire one - as UBS/UBS2 performs badly when used for video
• Then move/copy over within Project resp Events window in iMovie Application
Hopefully I've been not to confusing or badly structured to be followed.
Yours Bengt W

How to move iMovie project from one computer to another

I have been working on an iMovie 09 project on my desktop at home.
Now I want to work on the same project on my computer at work.
How can I move the project from one computer to another? What I've already tried was to make a duplicate copy of the project and then use a thumb drive to move that to another computer. It didn't work.
Thanks for your help.

Hello James Snedeker,
After reviewing your post, it sounds like you want to move a file to another disk. I would recommend that you read this article, it may be able to help the issue.
iMovie: How to Save Projects to Another Hard Disk
To copy an iMovie project to another disk:
1. Quit iMovie if it is open.
2. Locate the project folder in the Finder.
3. Drag the project folder to the other disk.
Note: You must move the complete project folder, intact, to the other disk in order to successfully copy the project. The project folder has the same name as the project listed in the iMovie window. This folder includes the iMovie project file, as well as a Media folder, which contains all of the clips associated with this project. If you don't copy all of these items, the project may no longer be readable in iMovie.
Once you have copied the project, try opening it in iMovie to ensure that it copied to the other disk successfully.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

HT201109 Why can't I open a final cut project from one computer in another computer?

I'm using Final Cut Pro Trial. Why can't I open a final cut project from one computer in another computer? When I try to open the project on my desktop it doesn't recognize the format. Please help!

I downloaded FCPX trial on my laptop as well as on my desktop. I did some editing on my laptop but I need to get the project I created on my laptop onto my desktop. When I import the project onto my desktop the videos are Red and they say "Missing File."

Transfer iweb files from one computer to another

Does anyone know how to transfer iweb files from one computer to another?

Change the name of the file to Domain-2.sites2 and try to copy it to the Desktop on the new Mac.
To open your domain file in Lion or Mountain Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible in Lion or Mt. Lion enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
For Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Optionsmenu to bring the this window:

Copying iweb pages from one computer to another

I have iweb pages operational on a G5.
I want to transfer them to iweb on my macbook instead.
I don't want to re-create them from scratch.
I have a .mac account.
Both iweb programs are the same version.
This is a mac! There must be an easy way to copy the web pages from one computer to another!
I explored the domain file route, copied the file from my G5 to the macbook, and did not get the pages I wanted. Instead I got the start page template. My information was not there.
Any help out there?

All your information is in a single file called "domain"
By default it should be located in your
user/library/application support/iWeb/ folder.
Find it, copy it, and move it to the new computer.
The first time you use it on the new computer double click the newly moved "domain" file to start up the iWeb application. Once you do that iWeb will remember that that is the file to open on start-up.
I use multiple computers to edit iWeb and to avoid confusion as to which "domain" file is the most recent, I just keep it on a flash drive. Be sure to keep "domain" backed up safely on your computers and off (CD disks, external hard drives, etc) because if you lose that one file, you've lost all your work. iWeb cannot edit published pages.
The reason you got blank pages is that you have to double click on the newly moved "domain" file to start up iWeb. Otherwise iWeb will start from the blank "domain" file that is already on the computer. You can have many "domain" files on the computer, If you start the iWeb application by clicking the iWeb icon, it will open the last "domain" file edited on that computer, which isn't the one you just moved. There is no other way to access your work.
Good luck, David
ibook & imac Mac OS X (10.4.8)

Transfer iMovie 08 Project from one computer to another

I created an iMovie 08 project on my macbook pro. The footage came from a digital still camera on video mode as opposed to a video recorder.
I then attempted to transfer the iMovie project to my iMac which I use to sync with my Apple TV.
I transferred the file over my airport extreme network, and moved the file into the iMovie projects folder in my movie folder in my home folder.
It shows up as a project, but does not play. All I see in the window is black screen.
I even imported the raw footage into the iMac so that there was some data there.
My question is whether there is a way to transfer an iMovie project in iMovie 08 from one computer to another.
Thanks.

The macrumours link just telss you how to move the events which is relatively straightforward.
Alot of advice just seems to rest with leave the projects on your internal drive as they don't take up much space.
However, http://karsten.schluter.googlepages.com/im08tricks has a description of how to move the projects and then 'fool' imovie into where the projects are stored.
Not very flexible but it does allow you to 'clear' your macbook yet when you restore the sym-link file to the right place and restart imovie you can reconnect to all your old projects and events without yellow triangles of death appearing.
By the by apple needs to sort this out as archiving old projects and events together and preserve the editing is a really basic requirment I think.
PS anyone found out how to merge projects yet? Another basic function that seems to be lacking.

Moving an iWeb project from one computer to another

Similar Messages

Maybe you are looking for