Moving and Copying Plug Ins from one channel to another

According to p305 of the Logic manual, "Command dragging plug ins from one insert to another copies them along with all parameter settings" ( in the Audio Configuration window),
However when I do this it MOVES the settings and plug ins leaving the original track bereft...
Any explanations gratefully received
ms

"holding option command copies the plug in settings" p305
This is the obvious work around ... excuse the air space

Similar Messages

Moving or copying a photo from one album to another

I am new to Mac and iphoto. I imported photos from a photo card to my library. I have an Album containing some of the photos imported to my library. When I went back in later to move (or add) some photos from the main library to my album, I could not seem to drag or copy them. Any suggestions regaeding what I might be doing wrong?

First, if you are new to iPhoto, I suggest that you take the time to look at the tutorials for iPhoto and all of the iLife applications that you are going to be using. start here
And, be sure you understand how iPhoto works, what it does and does not do.
Look at this thread and read the posts by Smtr and Terence Devlin for more information look here
Now, you have imported photos into iPhoto, created an album and now you cannot add photos to it?
Have a look at this, from iPhoto Help:
Creating a standard photo album
You can create standard albums to better organize your photo library, group the photos you want to burn to CD or DVD, or choose pictures for a webpage.
To create a standard photo album:
Choose File > New Album.
You can also click the Add button, which looks like a plus sign, in the bottom-left corner of the iPhoto window, then choose Album from the pop-up menu.
Type a name for your album and click Create. The album appears in your Source list.
Click Library, then drag photos to your new album.
You can also add a photo to an album directly from another album, a CD or DVD, or another location on your hard disk. When you add a photo to an album from another location on your hard disk, iPhoto automatically imports it into your photo library.
You can also select the photos you want to group first, then create a standard album from them. To do this, Command-click to select all the photos you want to include in the album, then choose File > New Album From Selection and name your album.
You can also create an album by dragging a folder of photos from the Finder into an empty part of iPhoto's Source list. iPhoto creates an album with the folder's name and imports all photos contained in the folder.
Lastly, if you have followed all these instructions and still cannot put a photo into an album, try deleting iPhoto's preference file. It is found in YourUserName/Library/Preferences/com.apple.iphoto.plist.com. You need to close iPhoto first, locate the plist file and trash it. Don't worry, iPhoto will create another one when you open it again. Open iPhoto and see if it works ok now.
Post back after reviewing/doing all of this, if you are still having problems.

Erasing and installing plug ins from the internet

erasing and installing plug ins from the internet?

What plug-in what browser??
FireFox>Tools>Add-ons>Plug-ins, etc
Safari>Preferences>Extentions
Safari>Help>Installed Plug-ins

Can I copy my iTunes from one Mac to another to a distant location?

I have 2 homes one in NYC and the other in upstate NY. I have multiple Macs at both locations all using Snow Leopard and the latest version of iTunes(9). I only have 1 iTunes library I maintain at the upstate location and have to bring my iPod to the NYC location to play my music. Can I not copy my iTunes library to the NYC location using Home Sharing or using some other method? I often forget to bring my iPod and am left without my music.

Prince Moe wrote:
Hi
Since I had a problem with my Mac's drive that suddenly failed (I am able to read ONLY), I replaced the internal HD with my emergency HD that I had backedup a few months before. I would like to know if there's a way to copy my settings from one mac to another? Is there a specific folder for all apps or do I have to find out each and every single file for each app?
I need the settings for
System (view, font, color,)
Finder (view, etc)
iTunes (that include all library, playlists, etc),
Firefox (Bookmarks, settings & plug-ins),
Safari (Bookmarks, settings & plug-ins),
Address Book (contacts)
Thuderbird (emails accounts, contacts, passwords, etc)
Stickies (stickies on the dock - i have info on there unsaved)
Filezilla (FTP infos)
Would appreciate.
Thnx.
All that info is found in your user/library folder, I just did a 60 machine rollout and copied all those settings from user/library, just be forewarned that if you upgrade software those setting will not take on the machine, for example Adobe CS 3,4 will not usable by CS5. let us know if you need more help. Also make sure you copy most of your preferences in the user/library/prefences folder.
Note: If you are using an identical backup with all apps and user settings, you can just copy all folders from user to your new home folder. Remember that only if the image or backup is identical to your production OS.

Can i copy my settings from one mac to another?

Hi
Since I had a problem with my Mac's drive that suddenly failed (I am able to read ONLY), I replaced the internal HD with my emergency HD that I had backedup a few months before. I would like to know if there's a way to copy my settings from one mac to another? Is there a specific folder for all apps or do I have to find out each and every single file for each app?
I need the settings for
System (view, font, color,)
Finder (view, etc)
iTunes (that include all library, playlists, etc),
Firefox (Bookmarks, settings & plug-ins),
Safari (Bookmarks, settings & plug-ins),
Address Book (contacts)
Thuderbird (emails accounts, contacts, passwords, etc)
Stickies (stickies on the dock - i have info on there unsaved)
Filezilla (FTP infos)
Would appreciate.
Thnx.

Prince Moe wrote:
Hi
Since I had a problem with my Mac's drive that suddenly failed (I am able to read ONLY), I replaced the internal HD with my emergency HD that I had backedup a few months before. I would like to know if there's a way to copy my settings from one mac to another? Is there a specific folder for all apps or do I have to find out each and every single file for each app?
I need the settings for
System (view, font, color,)
Finder (view, etc)
iTunes (that include all library, playlists, etc),
Firefox (Bookmarks, settings & plug-ins),
Safari (Bookmarks, settings & plug-ins),
Address Book (contacts)
Thuderbird (emails accounts, contacts, passwords, etc)
Stickies (stickies on the dock - i have info on there unsaved)
Filezilla (FTP infos)
Would appreciate.
Thnx.
All that info is found in your user/library folder, I just did a 60 machine rollout and copied all those settings from user/library, just be forewarned that if you upgrade software those setting will not take on the machine, for example Adobe CS 3,4 will not usable by CS5. let us know if you need more help. Also make sure you copy most of your preferences in the user/library/prefences folder.
Note: If you are using an identical backup with all apps and user settings, you can just copy all folders from user to your new home folder. Remember that only if the image or backup is identical to your production OS.

How To Copy Selected Music From One Library to Another?

What is the best way to copy selected music from one library to another?
I have a big and growing iTunes library -- 33,000 songs.
A year ago I copied my library to my daughter's new iMac. Now, a year later, I'm off to visit her and wonder how best to update her library. In the past year I have added a number of items to my library and I'm sure she has done the same -- some might be the same but many will be different.
How do I update her library with the new things I've added in the past year but not wipe out things she had added or duplicate when we each have a song?
I can load any / all of my stuff on an external HD and take that to plug in to her computer. Then what? I want to avoid duplicates and make sure I get stuff like album artwork.
I'm running iTune 10.4 on an iMac with OS X 10.6.8 -- my daughter will have the same iTunes and OS X once we update her software.
Any advice would be great.
Thanks

If you're sharing the same Apple ID and all your songs are from the iTunes Store, it's easy:
In iTunes on your computer, go to File->Preferences->Store and check the box next to MUSIC under AUTOMATIC DOWNLOADS.
You should also read this article, the section titled TO DOWNLOAD PREVIOUSLY PURCHASED APPS, BOOKS, MUSIC, OR TV SHOWS TO YOUR COMPUTER:
http://support.apple.com/kb/ht2519
You could also use an rsync utility such as backuplist+ to perform a 2-way sync of the files in your two libraries while your computers are connected via FireWire with one of them in FireWire Target Disk Mode, or from your external hard drive with your daughter's computer and then to yours again. After that, you'll need to use iTunes on each computer to update its library with the new files:
http://rdutoit.home.comcast.net/~rdutoit/pub/robsoft/pages/backup.html
This last would also be the preferred method if you have authorized each other's computers for media purchased with each other's Apple IDs (i.e. you are not sharing the same Apple ID), or if you have music from sources other than the iTunes Store. Most likely, though, music from sources other than the iTunes Store would not be legal to copy in this way for this purpose, although there is probably no technical impediment.

Export and Import a page from one application to another within same WKSPCE

Hello,
Can anyone help me out in moving a page from one application to another within the space workspace. I tried to export it and then import the page, but I am not able to do that. I think the problem is with the application IDs.
Plz help me out with this issue.
Thanks,
Orton

Hi Orton,
moving a page from one application to another within the space workspace
This U can get it, through copying the page from one application to another application within the same workspace
In the top of the page, you have "copy" option.
regards,
Kavitha

I have no problems copying iMovie Events from one Mac to another, however, how can I copy iMovie Projects from one Mac to another?

I have no problems copying iMovie Events from one Mac to another, however, how can I copy iMovie Projects from one Mac to another? Any help will be appreciated. Thank you.

This should give you some good insight, I'd probably store them on an External HD on the old machine and then just drag and drop to the new machine.
https://discussions.apple.com/docs/DOC-4141

How can I copy cell formatting from one range to another?

How can I copy cell formatting from one range to another, including text fonts, colours, borders, etc., so that, for example, I can reuse a formatted reconciliation table again in different parts of a sheet?

Hi George,
Wayne found the Spinning Beachball of Death, and you will find it too.
Numbers is not good at handling large datasets. Might I suggest that you group your data into smaller sets (each month, perhaps?) and save each group in a separate Numbers document. Numbers will not link between documents, but you could have a summary Table within each document. Then comes the "clunky" bit of copying all those summary tables into a master document where you do the final processing of the data.
Regards,
Ian.

How do I copy the style from one control to another?

I need to programmatically copy the style from one graph to another. I'm currently using the importstyle and export style functions but I'd like to avoid that since: 1) I'm creating >100 of the same graphs in a scrolling window and execution time is a concern, and 2) it makes it harder to redistribute the application, and 3) you shouldn't have to import/export from disk just to copy a graph style.
I noticed the copy constructor was disabled so you can't just create a new one from the original. I suppose I could iterate through all the styles and transfer them from the master graph to all the copies but is there an easier way to do that? If not, is there some sample code for that?
I'm using MStudio 7.0 for C
++.
Thanks,
-Bob

One way that you could do this would be to create a helper method that configures your graph rather than configuring it at design-time, then use that helper method to apply the settings to the new graphs that you create. However, this would only work if you wanted all graphs to be configured exactly the same way - this would not work if the settings of your master graph are changing at run-time and you want the new graphs to be configured with the current settings of the master graph.
Another approach is to query each control for IPersistPropertyBag, create an IPropertyBag, pass the IPropertyBag to the master graph's IPersistPropertyBag:ave, then pass the IPropertyBag to the new graph's IPersistPropertyBag::Load implementation. I'm not aware of any implementations of IPropertyBag that are readily available for use in applications, so the tricky part is creating the IPropertyBag. Below is a very simple implementation of IPropertyBag that should be enough to get the job done for this example. First, add this to your stdafx.h:
#include <atlbase.h>
CComModule _Module;
#include <atlcom.h>
#include <atlcoll.h>
Here's the simple IPropertyBag implementation:
class ATL_NO_VTABLE CSimplePropertyBag :
public CComObjectRootEx<CComSingleThreadModel>,
public IPropertyBag
private:
CAtlMap<CComBSTR, CComVariant> m_propertyMap;
public:
BEGIN_COM_MAP(CSimplePropertyBag)
COM_INTERFACE_ENTRY(IPropertyBag)
END_COM_MAP()
STDMETHODIMP Read(LPCOLESTR pszPropName, VARIANT* pVar, IErrorLog* pErrorLog)
HRESULT hr = E_FAIL;
if ((pszPropName == NULL) || (pVar == NULL))
hr = E_POINTER;
else
if (SUCCEEDED(::VariantClear(pVar)))
CComBSTR key = pszPropName;
CComVariant value;
if (!m_propertyMap.Lookup(key, value))
hr = E_INVALIDARG;
else
if (SUCCEEDED(::VariantCopy(pVar, &value)))
hr = S_OK;
return hr;
STDMETHODIMP Write(LPCOLESTR pszPropName, VARIANT* pVar)
HRESULT hr = E_FAIL;
if ((pszPropName == NULL) || (pVar == NULL))
hr = E_POINTER;
else
m_propertyMap.SetAt(pszPropName, *pVar);
hr = S_OK;
return hr;
Once you have a way to create an implementation of IPropertyBag, you can use IPropertyBag and IPersistPropertyBag to copy the settings from one control to another like this:
void CopyGraphStyle(CNiGraph& source, CNiGraph& target)
LPUNKNOWN pSourceUnknown = source.GetControlUnknown();
LPUNKNOWN pTargetUnknown = target.GetControlUnknown();
if ((pSourceUnknown != NULL) && (pTargetUnknown != NULL))
CComQIPtr<IPersistPropertyBag> pSourcePersist(pSourceUnknown);
CComQIPtr<IPersistPropertyBag> pTargetPersist(pTargetUnknown);
if ((pSourcePersist != NULL) && (pTargetPersist != NULL))
CComObject<CSimplePropertyBag>* pPropertyBag = 0;
CComObject<CSimplePropertyBag>::CreateInstance(&pPropertyBag);
if (pPropertyBag != NULL)
CComQIPtr<IPropertyBag> spPropertyBag(pPropertyBag);
if (spPropertyBag != NULL)
if (SUCCEEDED(pSourcePersist->Save(spPropertyBag, FALSE, TRUE)))
pTargetPersist->Load(spPropertyBag, NULL);
(Note that "CreateInstan ce" above should be CreateInstance - a space gets added for some unknown reason after I click Submit.)
Then you can use this CopyGraphStyle method to copy the settings of the master graph to the new graph. Hope this helps.
- Elton

Newbie Qs: Copying an outline from one application to another

My apologies for accidentally posting this question twice!
Hello,
I want to copy an outline from one database to another, both on the same server. I know I can save the outline as a .otl file. But how do I actually copy this saved .otl file over to the other database? Sorry if this is a very basic question, complete newbie to Essbase. Thanks.
ps: Is there another way of copying the outline over from one database to another?
Edited by: Sam on Jun 27, 2010 1:48 PM

Open the outline in Edit mode, and from File > Save As, Select "Essbase Server" tab. Navigate to database where you would like to save. If you have data inside the cube, it will give you options on what to do with the data.
Hope this helps
Thanks,
Naveen Mikkilineni

Copying a table from one databse to another

Hi,
I used the following code to copy a table from one database to another.
set copycommit 1
set arraysize 1000
copy from username/passwd@tnsname -
create <tablename> -
using -
select * from <tablename>
But I get the following error:
set copycommit 1
ERROR at line 1:
ORA-00922: missing or invalid option
Could you please let me know how this can be done.
Thanks,
Narasimhan

Thanks for your suggestions.I created a database link.I had no problems.
Then when i issue the command
copy from uname/password@db
create <tablename>
using
select * from <tablename>
<Here db is database link to source database identified by uname and password>.
I still get the error
copy from uname/password@db
ERROR at line 1:
ORA-00900: invalid SQL statement
Does it mean that the command is wrong?Or I'm doing something different.
Thanks!

Error while copying GL Accounts from One Client to another client

Hi,
We are trying to copy GL accounts created in one client to another client (Company Code is same in both the clients). First we executed FS15 (send) and a file was created on the server. With the help of BASIS team we checked that file and it contained the required values. However, when we are doing FS16 (receive) we are getting following OK messages:
File /usr/sap/DEV/SYS/global/FBISABC is being checked
Session 1 session name RFBISA20 : No terminations have been found
However, at the same time we are getting following error message:
File name FI_COPY_COMPANY_CODE_DATA_FOR_GENERAL_LEDGER_0X is unknown
Message no. SG001
Diagnosis
No entry was found in the conversion table for the logical file name FI_COPY_COMPANY_CODE_DATA_FOR_GENERAL_LEDGER_0X.
Procedure
Add an entry to the conversion table for the logical file name. Maintain the conversion table with the transaction SM30.
Can someone please advice is there something wrong that we are doing for copying GL accounts from one client to another client.
Thanks,
Sanjay

Dear Sanjay,
Did you check the batch-input? SM35
It could have happend that there was a mistake in the batch-input data and that the destination file has not been written. If this has not been written it could not be found. (I.E. you tried to transport G/L Accounts with deletion flags but did activate the checkbox "Transfer deletion ****").
There is another point: Did you activate the box "Datei nur prüfen" (English: Check file only)? If this box is activated the programm will check if the batch-input-file will be written without mistakes but it will not write the file. Only if the checkbox is not activated the batch-input-file will be written. (the same with FS16).
Kind regards
Maike
Edited by: Maike Nemeyer on Dec 1, 2011 8:52 AM
Edited by: Maike Nemeyer on Dec 1, 2011 11:45 AM

Copying table rows from one table to another table form

Hi
I have a problem about Copying table rows from one table to another table form.On jsf pages if you enter command button go anather jsf page and it copy one row to another table row. But when i execute this process for table FORM it doesn't copy I wrote a code under "createRowFromResultSet - overridden for custom java data source support." Code block is:
ViewRowImpl value = super.createRowFromResultSet(qc, resultSet);
try{
AdfFacesContext fct = AdfFacesContext.getCurrentInstance();
Number abc = (Number)fct.getProcessScope().get("___");
value.setAttribute("___",abc);
}catch(Exception ex){System.out.println(ex); }
return value;

Table may be copied with the
expdp and impdp utilities.
http://www.oracle.com/technology/products/database/utilities/index.html

How do I copy a list from one site to another that has a column that appends changes to existing text?

I want to move a list from one SharePoint site to another, within the same collection. I have created a template and included the content but the column that is selected to append changes to existing text, has not copied in all cases, although it has for
some items.
I have a limited knowledge so won't be able to implement any solutions that require the use of code.

Hi,
According to your post, my understanding is that you wanted to copy a list from one site to another that has a column that appends changes to existing text.
I recommend to use the custom workflow activity Copy List Item Extended Activityto
copy list items and files cross site.
You can do this with codeless SharePoint Designer workflows as long as you can install the
Codeplex Custom SharePoint Designer Workflow Activities.
These activities are also built-in to SPD2010.
To install the custom activities, please follow the steps as below:
Download the solution file form
Useful Sharepoint Designer Custom Workflow Activities
Copy the wps file to the Disk C.
Open the SharePoint 2010 Management Shell.
Run the command: add spsolution c:\ dp.sharepoint.workflow.wsp
Open the Center Administration, click System Setting->Manage Farm Solution-> dp.sharepoint.workflow.wsp->Deploy to one or more Web Application.
Open the SharePoint designer, add action from Custom Actions.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Moving and Copying Plug Ins from one channel to another

Similar Messages

Maybe you are looking for