Moving Asset Inventory MSSQL Database

I'm running ZEN 7.0 SP1 with asset Inventory.
I need to move the Asset Inventory database to a new server but can't
find how to do this. i notice that Jared has a utility for moving a ZAM
7.5 database but does this work with an Asset Inventory 7.0 database?
If it doesn't how do I move the database?
TIA

WoofaJB
Ooops - I meant the ZAM AI module.
Terry Mounsey wrote:
>
> WoofaJB
>
> The Inventory that comes with ZDM
>
>
>
> WoofaJB wrote:
>
> >
> > Are you referring to the inventory that comes with ZENworks Desktop
> > Management (ZDM) or the ZAM AI module?
> >
> > If ZDM inventory, you're best off posting to the separate ZDM
> > inventory forum.
> >
> > If ZAI, then this is the same as the full ZAM - the architecture is
> > identical (licensed ZAM gives you software usage, license management
> > etc. but the database etc. are the same technologies).

Similar Messages

Upgrade from Windows 8.1 Preview to RTM destroyed MSSQL databases

I am not really sure WHY this happened, but I am so upset right now. On my development machine, I installed the Windows 8.1 release from the Windows Store on a machine that had the Windows 8.1 preview installed.
It's bad enough that much to my surprise, the installation was not an upgrade at all but rather a new Windows installation that migrated most of my user profile but none of my apps. I wasn't looking forward to the 2 days or so it would take to reinstall
everything the way I had it before.
But even worse is that I went to look in the Windows.old folder for several MSSQL databases that I expected to find in their default location under Program Files only to find that they were nowhere to be found! The .MDF and .LDF files are gone! Yet the master,
tempdb, etc are right where I'd expect them to be. I managed to find traces of these files with an undelete application but they are unrecoverable.
Because these weren't production databases, I have no backups of course. I have files where the data originally came from, but the stored procedures, table schemas, etc. are all gone. Naturally there's nothing that can be done about it at this point but
I just need to understand WHY did Windows 8.1 selectively blow away my MSSQL databases while seemingly moving everything else to Windows.old???

Hi
This is typical behavior for updating any Preview version of Windows. Pre-release (Beta) code is always completely removed with a clean install.
The only files that are safe during this process are those that are located in the User Account folders. These files are set aside in a temporary location and then restored after the update. Files in system locations will be at risk
Windows 8.1 Preview FAQ
http://go.microsoft.com/fwlink/p/?LinkId=301773
Will I be able to keep my files, settings, and apps if I install Windows 8.1 Preview?
When you install subsequent editions of Windows 8.1 you'll be able to keep your personal files, but you'll need to reinstall your apps.
Windows 8.1 Preview: An Enterprise Call to Action:
http://blogs.windows.com/windows/b/springboard/archive/2013/06/27/windows-8-1-preview-an-enterprise-call-to-action.aspx
Regards

Error while creating JDBC connection pool for MSSQL database

Hi,
From my windows m/c, I am trying to configure a connection pool to connect to
an MSSQL database on another m/c. While setting the targets, i get the error :-
<Mar 11, 2004 6:17:52 PM GMT+08:00> <Error> <JDBC> <Cannot startup connection
pool "gcdb_connpool" Cannot load driver class: com.microsoft.jdbc.sqlserver.SQLServerDriver>
I have added the path of the jars for the driver in the classpath.
Any help would be appreciated.
Thanks.

Hi. Read the weblogic startup script, and follow how it creates
a classpath argument for the server. You must get the driver jars
into that classpath.
Joe
Neha wrote:
Hi,
From my windows m/c, I am trying to configure a connection pool to connect to
an MSSQL database on another m/c. While setting the targets, i get the error :-
<Mar 11, 2004 6:17:52 PM GMT+08:00> <Error> <JDBC> <Cannot startup connection
pool "gcdb_connpool" Cannot load driver class: com.microsoft.jdbc.sqlserver.SQLServerDriver>
I have added the path of the jars for the driver in the classpath.
Any help would be appreciated.
Thanks.

Accessing MsSQL Database from ABAP

Hi Guys,
I want to connect to an external MsSQL Database running in a window environment from an ABAP Report program where the SAP instance running in a Linux OS with DB2 as a Database. I tried all options suggested in all public forums like maintaining DBCON table entry & placing compatible dll files. I need answers from individuals who have done it in the recent past with this environment not beating bushes.
Thanks in advance.
Regards
Vijaya

hi,
see on oss note Question 4
Note 555223 - FAQ: Microsoft SQL Server
Q4: My SAP System runs under Oracle (DB2, SAPDB, ...) and I want to
exchange data with a non-SAP Microsoft SQL Server directly from ABAP.
Q4: My SAP System runs under Oracle (DB2, SAPDB, ...) and I want to exchange data with a non-SAP Microsoft SQL Server directly from ABAP. A4: The establishing and use of connections from an R/3 system to another non-SAP database (from the same vendor or not) is called multi-connect and is described in note 178949.
But you must have a specific application server running on Windows if you want to connect SAP to your Microsoft SQL server with DBCON.
Rgds
Edited by: stéphane mouraux on Feb 27, 2010 11:21 PM

Would PHP or Python work more efficiently to grab from a MSSQL database in AS3?

Would PHP or Python work more efficiently to grab information from a MSSQL database in AS3? How would it work? Thanks!

that's not a flash issue.
but here's a comparison, http://benchmarksgame.alioth.debian.org/u32/benchmark.php?test=all&lang=python&lang2=php
which looks like python would be faster at data handling and slow at arithmetic operations.
you would call both server-side scripts using the urlloader class from flash.

Connecting MSSQL Database source system from BW 3.5/Oracle 9.2.0.6/AIX 5.3

Hi,
We want to extract data from MSSQL database source system into BW 3.5/Oracle 9.2.0.6 system in AIX environment. Apart from intsalling NT app server,UDC, XI,flat file options, can you please suggest any other methods to extract data from SQL database into BW/AIX system?. Thanks in advance.
Thanks.
Raj.

Raj,
Did you find any solution for this problem. We are having exactly the same issue and are trying to do it with SAP DBConnect.
We are able to create a Source System for MSSQL server but it does not connect since the "Database Shared Library" is not installed on our BW 3.5 AIX box.
From what we gather there is NO DSL for MSSQL for AIX. I cannot believe we cannot connect to MSSQL directly since we have too many MSSQL databases all around the company.
regards,
Atul

DW CS4 Links to MSSQL Database, sees fields/data but won't display on webpage

I'm trying to get a Dynamic Data Table to show in my webpage but I can't. (Using ASP JavaScript)
I'm using DW CS4 (10.0 build 4117) and connecting to an MSSQL database on a Windows platform server hosted by Verio.
I can successfully link to the database, I can see my data correctly when I bind the record set and do a "Test SQL Statement" , see images below:
My Design View of the page with the table shows the correct fields and looks like:
Everything should look when I switch to Live View or view the page on a browser, right?? Well instead I get this:
If the pic is unclear it says:
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
/Test2009/Untitled-1.asp, line 5
Line 5 of course refers to the ActiveConnection command which uses the INCLUDE file for the connection string.
The Line 5 is
Recordset1_cmd.ActiveConnection = MM_PMCDonSQL_STRING;
And the INCLUDE reverenced is:
var MM_PMCDonSQL_STRING = "dsn=PMCSQL1;uid=pmcapp0010sql;pwd=FloraVista49;"
These are parameters for logging into the MSSQL database (This is just a test database so showing password doesn't matter)":
Server By Name: SQLExpress4.mql14000.MSSQLServers.com,1433\SQLExpress4
Server By IP: 128.121.85.21,1433\SQLExpress4
Database Name: pmcapp0010
Login ID: pmcapp0010sql
Password: FloraVista49
WHAT AM I DOING WRONG?

No one wanted to help me but I figured out that I was not referencing the DSN on the test server, only the local DSN.
The information to connect to the MSSQL database given by my hosting company was not correct for Dreameweaver (or MS Access) either.

Can't connect to MSSQL database

Hi,
I'm very new to J2EE. I've been trying to get my JSPs to access my MSSQL database. I'm using JBoss as the application server.
Here's what I've done:
1. Downloaded and installed the MSSQL 2000 JDBC driver.
2. Edited the \server\default\deploy\mssql-ds.xml file:
<datasources>
<local-tx-datasource>
<jndi-name>MSSQLDS</jndi-name>
<connection-url>jdbc:microsoft:sqlserver://server1:1433;DatabaseName=Test;User=sa;Password=passwd;SelectMethod=Cursor</connection-url>
<driver-class>com.microsoft.jdbc.sqlserver.SQLServerDriver</driver-class>
<DatabaseName>Test</DatabaseName>
<user-name>sa</user-name>
<password>passwd</password>
<min-pool-size>100</min-pool-size>
<max-pool-size>1000</max-pool-size>
<blocking-timeout-millis>5000</blocking-timeout-millis>
</local-tx-datasource>
</datasources>
3. I edited the "C:\jboss\bin\run.bat" file and inserted into the second line:
"set CLASSPATH=c:\mssql_jdbc_driver\lib\mbase.jar;c:\mssql_jdbc_driver\lib\msutil.jar;c:\mssql_jdbc_driver\lib\mssqlserver.jar;"
where C:\mssql_jdbc_driver is the folder where my *.jar files are located.
4. I created a .jsp page like this:
-----Start test.jsp -----------
<%
try {
String sDBDriver = "com.microsoft.jdbc.sqlserver.SQLServerDriver";
String sConnStr = "jdbc:microsoft:sqlserver://localhost:1433;DatabaseName=multiplex;User=sa;Password=secret;";
Class.forName(sDBDriver);
java.sql.Connection conn = java.sql.DriverManager.getConnection(sConnStr);
java.sql.Statement stmt = conn.createStatement();
java.sql.ResultSet rs = stmt.executeQuery("select 'Multiplex' As Name");
while (rs.next()) { %>
<%= rs.getString("Name") %><br>
<%}
catch (ClassNotFoundException cnfe)
System.err.println("Unable to load MSSQL database driver!");
System.err.println("ClassNotFoundException: " + cnfe.getMessage());
%>
------End test.jsp -----------------------
5. But then when I run test.jsp, I get a ClassNotFoundException saying its not able to load the MSSQL driver.
Have I missed out some configuration step? I've been searching all avenues of support for 3 days but still can't get it working. Can someone help, please?
Thanks!

Thanks for your replies.
The database should be "Test", sorry.
I find the JBoss documentation isn't very beginner-friendly. And I can't get a reply from the JBoss forums. Does anyone who has worked with JBoss know where I should define the CLASSPATH for the MSSQL jar files?
Actually if someone could point me to step-by-step instructions on how to set up a database connection to MSSQL from JBoss in a Windows environment, I would be very very grateful...

Office 2010 Asset Inventory not visible

We are rolling out Office 2010. The Asset Inventory does not appear to be picking up any of these.
Is the a PRU update including the latest MS Office 2010 products.

Originally Posted by markvh
We are rolling out Office 2010. The Asset Inventory does not appear to be picking up any of these.
Is the a PRU update including the latest MS Office 2010 products.
Which PRU version are you using? Office 2010 seems to be included in the latest PRU.
Thomas

Connections to MSSQL database

Hi SDN.
A long time ago some had developed a jspdynpage application on a MSSQL database using a jdbcconnector. Sometimes we get a connection error, and we have to restart the portal. We think that it might be that there are to many open connections.
Is there anywhere that I can see these open connections?
Where do I set up how many connections are allowed?
Our portal is 6.0.2.41
Thanks
Peter

Hi Peter,
check the SAP Library section <a href="http://help.sap.com/saphelp_nw70/helpdata/en/2d/292391fa6745488f3e0e0d4b03c64e/frameset.htm">Managing Connection Pooling</a>. There you will find detailed instructions how to set maximum number of connections.
Best regards,
Martin

Connecting to MSSQL Database

Hello,
Currently we are migrating out existing application from Weblogic to OAS 10g 10.1.3. In the current code we are connecting to the MSSQL Database as below:
DriverManager.registerDriver (new weblogic.jdbc.mssqlserver4.Driver());
In the above code we are using the weblogic specific jar to register the driver to connect to the Database. Is there an equivalent class available in OAS? (I am using JDeveloper IDE for development work)
Kindly let me know. Thanks in advance.
Thanks,
Lakshmisri Gopalan

Hello,
Currently we are migrating out existing application from Weblogic to OAS 10g 10.1.3. In the current code we are connecting to the MSSQL Database as below:
DriverManager.registerDriver (new weblogic.jdbc.mssqlserver4.Driver());
In the above code we are using the weblogic specific jar to register the driver to connect to the Database. Is there an equivalent class available in OAS? (I am using JDeveloper IDE for development work)
Kindly let me know. Thanks in advance.
Thanks,
Lakshmisri Gopalan

LDAP import for Asset Inventory - eDir support?

After reading the docs, it seems to indicate that if you wish to do an LDAP import for Asset Inventory (for demographic data) that you can only do a one to one relationship for the main item types.
Meaning:
eDir User stuff can only be mapped to ZCM "user" stuff
Workstation stuff can only be mapped to ZCM Device stuff.
Since eDir does not have workstation things (unless you happen to be migrating from ZFD, in which case the eDir items will eventually be removed via the AWI process or no longer updated), I have to ask if eDir is truly supported?
I can see AD because users AND computers have to be in AD (well unless you wish to punish yourself and have your pc's be in a workgroup and not be in your AD Domain, but I've yet to see any customer have an AD domain and NOT have their workstations be members of said domain).
But seems the only LDAP import you could do with eDir (especially if ZCM is your first install) is user level items, but I'm not sure that would actually accomplish anything for DEVICES.
We had wanted to take the user level "location" and "department" fields and map them to the workstations. Appears the only way to do this is via the old method used by jared jennings for ZFD (I see he's updated it for ZCM as well)
Am I wrong? Is there a way to map eDir user level attributes to the device so that when you look at Site/Department on the device it has the items based up on the user that logs into it?

kjhurni,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

How to connect to a MSSQL database thru EP

I need to know how to connect a mssql database to EP.

Hi Garry,
In order to connect to an external database you have to create JDBC or BI JDBC systems:
http://help.sap.com/saphelp_nw04s/helpdata/en/1f/bddf3d48b05d5ae10000000a11405a/content.htm
Then, you can show the information into the database using simple "query iviews"
http://help.sap.com/saphelp_nw04s/helpdata/en/f5/eb516b0e6a11d7b84900047582c9f7/content.htm
or with developer tools like Visual Composer
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/efeca129e31bc7e10000000a11466f/content.htm
Regards,
Nacho

Asset Inventory Count

I will like to do a physical inventory count of assets. After the physical count has been completed what transaction is used to enter the assets that were found in the account, which will then be automatically reconciled to the asset inventory list.
In the Materials Management module transaction MI04 is uded to enter assets found in the physical count. Is there a corresponding transaction for Asset Accounting

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Moving Average inventory valuation using DI?

Hi, all,
I need to make Moving Average inventory valuation.
Does anyone know how can i do it using DI?
Do you have any solution to solve this problem?
Your suggestions would much be appreciated.
Thank you,
Andy

Hi Andy,
The DI has no object to do valuations. Thus you can not achieve this using the DI.
You can however automate the process using the UI API.
(Automate selections and clicks etc.)

Moving Asset Inventory MSSQL Database

Similar Messages

Maybe you are looking for