Moving average and standard cost

Hi All,
I purchase raw material and trading item. assuming that my raw material is based on standard cost and trading item based on moving average.
1) if both item have no more inventory, the difference price between migo and miro will charge to price difference?
2) if raw material which base on standard cost still have inventory, may i know if there is a variance for migo and miro, the difference will go to where? if inventorise then what would happen to the standard cost.
3) if trading item which base on moving average still have inventory, the variance (between migo and miro) will be added to moving average. right?
4) for raw material which base on standard cost, may i know if freight cost, custom duty and some other miscellaneous cost need to add in, how possible it can add to the standard cost?
5) for trading item which base on moving average, may i know if freight cost, custom duty and some other miscellaneous cost also will be added in moving average price?
thanks

Hi,
1) if both item have no more inventory, the difference price between migo and miro will charge to price difference?
Yes, this is correct as per Accounting Standards
2) if raw material which base on standard cost still have inventory, may i know if there is a variance for migo and miro, the difference will go to where? if inventorise then what would happen to the standard cost.
Any difference between the Standard Price in Material Master and Purchase Value (PO Price) will debit or credit the Price Difference A/c no matter whether stock exits or not.
If Material Standard Price = 100 INR
And PO Price is = 120 INR
During MIGO;
Stock Account - Dr - 100 INR
Price Difference A/c - Dr - 20 INR
GR/IR Clearing A/c - Cr - 120 INR
3) if trading item which base on moving average still have inventory, the variance (between migo and miro) will be added to moving average. right?
Yes, it will debit or credit Stock Account and will update MAP of Material accordingly if enough Stock coverage is there.
4) for raw material which base on standard cost, may i know if freight cost, custom duty and some other miscellaneous cost need to add in, how possible it can add to the standard cost?
No, all will get posted to Price Difference Account as following;
If Material Standard Price = 100 INR
And PO Price is = 120 INR and Freight = 10 INR
During MIGO;
Stock Account - Dr - 100 INR
Price Difference A/c - Dr - 20 INR
GR/IR Clearing A/c - Cr - 120 INR
Price Difference A/c - Dr - 10 INR
Freight Clearing A/c - Cr - 10 INR
5) for trading item which base on moving average, may i know if freight cost, custom duty and some other miscellaneous cost also will be added in moving average price?
Yes, it will get added to stock and will update MAP accordingly if enough Stock coverage is there.

Similar Messages

  • Change costing method from Moving Average to Standard costing

    Hi Expert
    I need to find out the prerequisites for changing the valuation method of an item from Moving average to Standard costing.
    (In the forums i found a note which discusses the change of costing method from FIFO to Moving average.)
    It would be greatly appreciated if i can get a reply ASAP
    Thank you
    Regards
    Apsara

    Hi Son
    Let me rephrase my previous question as i have asked it incorrectly.
    Step 1. Make all quantities of the stock zero and also close all Open PO, SO etc
    Step 2. change the inventory valuation method
    Step 3. Enter new stock prices for the standard cost through stock revaluation. My question is can this be (step 3) done through DTW
    Thank you
    Kind Regards
    Apsara

  • Moving average and standard price both maintained

    Hi,
    I have maintained both moving average price and standard price in material master, price control is V
    is there any impact of standard price any where in the system.
    Regards,
    Ali

    Hi,
    The system considers only the price maintained in price control V or S.So Which ever price is maintained it will consider only that. As an example if you maintain price control as S and give standard price, So when you do GR against PO with different prices, You can see that system even calculates moving avg price for statistical purpose and same can be seen in material master. For for the transaction purpose only standard price will be considered.
    Regards,
    Atal

  • Show both Moving Average and Standard Price of an item in Report Composer

    Hello
    I do follow all my items at standard price. But i wish to get on the same report both the standard price and the moving average price.
    How can i do so :
    1 - either by a default report
    2 - Or by using report composer
    3 - By using a SQL Query
    Thanks
    Stéphane

    Thanks but is there a way to get both data on the same report ?
    The solution you gave me allows me only to output two different reports....I don't mind working with a vlookup from time to time but on a daily basis, this is a bit laborious
    Thanks for your continuous support
    Stéphane

  • Is it possible to change the costing from moving average to standard??

    hey all,
    i wana know is it possible to change the costing from moving average to standard or vice-versa in the item master??
    cheers

    Hi Satish
    Please look at the documentation from SAP for using this function. I just looked on my drive and can't find the document I used to have for this.
    Just setting quantities to zero will not work as all open P/O, S/O, etc must also be closed before you can run the Inventory Valuation Method function. This is all detailed in the document.
    I have done this successfully before for a client with over 4000 items, so I have been through the process. Please let me know if you need assistance.
    Kind regards
    Peter Juby

  • CS11 &CS12- Moving Price and standard price not appering for items

    Dear Gurus,
    CS11 &CS12- Moving Price and standard price not appering for items.
    is it a bug for my system alone\.
    or a bug overall in SAP itself.
    Pls advise.
    Siva

    Dear Siva,
    Its the standard functionality of SAP.
    You will not get any cost related data in the reports like CS11,CS12,CS13.
    You can try CK13N(which shows the components of the BOM along with the cost) or else CK86_99.
    At Functional module level execute this one CS_BOM_EXPL_MAT_V2 and ensure X is included for the
    input field MBWLS.
    And also check these SAP notes 177006 and 686509.
    Check and revert back.
    Regards
    Mangalraj.S

  • Reg:alv for checking the moving average price, standard price andpurchasing

    Hi.
    How to create ALVReport display for checking the moving average price, standard price and purchasing frequency of purchased materials. And for revise the ordering frequency of materials.
    please let me know the logic n program
    Thanks

    Please try yourself first...If you got any problem you can come back...Don't expect us to do your work.
    Greetings,
    Blag.

  • Relation between Preliminary and Standard Cost Estomate

    Hi,
    I would like to know how preliminary cost estimate using product cost collector and standard cost estimate are related to each other.
    I am not quite clear how both are used for a given plant in repetitive mfg scenario?
    Regards,
    Yogesh

    Hi,
    Thanks for the reply,
    My question do not need so many details for its answer.
    I would just like to know if standard cost estimate will still be required even if we are using repetitive manufacturing or it gets handled through product cost collector.
    I would like to know if there is any overlap between the two from process point of view.
    Regards,
    Yogesh

  • 12 Month Moving Average and 12 months rolling average

    Hi All,
    please let me know what is difference 12 Month Moving Average and 12 months rolling average
    can i get 1 example to achieve the solution

    Hey suneel,
    Both average are more or less same, for better understanding. go through below link, where you can get some clarifications.
    http://www.brighthubpm.com/project-planning/111351-guide-to-computing-rolling-averages-for-business-forecasts/

  • Shifting from Moving average to standard price

    Hi all
    Presently we are following for all our Inhouse produced materials with Moving average price,we want to change all the materials to Standard price,is it possible to change & if in case if stock is there we will not be able to change,Shall we have to create New material codes with price control S.
    whats the best solution
    Thanks
    Sandeep patil.

    Dear,
    ML is meterial ledger.
    It is used in following cases.
    - You have mutliple currencies and to see the stock in differnt currancies.
    - You want to see the variances to be carried to different levels of BOM and see the periodic price of the product even though the price control is S.
    Hence system will count all the variances and during ML closing steps calculate the variances and send to the higher level of BOM after chaning the periodic price of that raw materil. Hence at higest product level you will come to know exact production cost as well as level by level subassembly cost.
    With this cost you can revaluate the material so that the S price will change to this periodic price.

  • Moving average price/standard price via iDoc

    Hi,
    I would like to distribute moving average price and standard price on price change (price changed via transaction event or MR21) to external system.
    Is there a way to accomplish iDoc (MATMAS) triggering on price change?
    Any idea on how to track changes?
    Searching through forums I found that MATMAS will not trigger on MAP change via transactional event, GR, GI...
    Thnx

    Dear Amit,
    yes - I understand how the system calculates the MAP. However, the receiving system is a SAP WMS - In WM there is no inventory management nor FI/CO. The valuation would always be zero. So I'm interested how can I update it via ALE?
    It works for the first time if I have no valuation (accounting) view in the material and I send an IDoc with the view definition segment and a value for VERPR. But updating isn't possible.
    Gunter

  • Moving average price & Standard price

    Hi every body
    For one material some times we use moving avareage price and standard price for that material
    Which scenerio we use this & why we have to use this,can any body explain me
    Thanks

    Hi Tarun
    Both, Moving average Price and Standard Price are Price Control Indicators.
    It Indicates the price control used to valuate the stock of a material.
    Standard Price : It is a constant price at which a material is valuated without taking goods movements and invoices into account. It is normally used for finished Products - Fert ( Vlauation Class - 7920)
    Moving Average Price : It is a price that changes in consequence of goods movements and the entry of invoices, and which is used to valuate a material.
    The moving average price is calculated by dividing the value of the material by the quantity of material in stock. It is automatically recalculated by the system after each goods movement or invoice entry.
    It is Normally used for Raw Materials -- ROH ( Valuation Class -3000)
    Rewards points ,if usefull
    Regards
    Palaniappan

  • Material Moving Price and Standard Price

    Hello All,
    what could be the reason for having both the Moving Av.Price and Standard price in Material Master of FERT?
    Can anyone explain me the business case
    Thanks
    Arshad
    Edited by: arshad ahmed on Apr 21, 2009 8:35 AM

    hi
    Standard price for FERT, it is assumed that the FERT material is in_house produced and is subject to costing, that is price will be subjected to changes due to reasons which are internal. for example Inhouse cost run, manual change or costing during confirmation. This price becomes the basis for sales of teh product, where we further add other expenses like transport/insurance/ handling  or any other  cost before sellling it.
    Moving Avg price means that the material is subject to price Variations due to Procurement or trading activity as it is a Finished material. If only activity would have been Trading then might be HAWA could have been the solution, since Procurement is involved the Moving Price indicator is there for weighted avg price updation of the material.
    Best regards

  • Material ledger and standard cost estimate

    Hi Gurus,
    When standard cost estimate is done in a scenario, where  material ledger is activated, does the entire stock get revaluated andl post a credit in my P/L? Is it possible  to keep my inventory(FG and SFG) at periodic unit price ie at the actual manufacturing price over a longer period say 3 years? Please fill this gap in my understanding.
    Best regards
    Vimal

    Hi Vimal,
    Material ledger uses the standard price as 'preliminary price' always during the current month, independent of the question if a new standard price was estimated and released.
    But: After period end, when the actual price is calculated the posting will adjust the inventory and P/L accounts to the actual price, with posting date in the recent period.
    That means if you have a material that was manufactured once and then consumed over a 3 year period, and during that period you calculate the same material in a standard cost estimate with changing results, that would mean: Looking back at any month during the 3 years the consumption and stock values will be valued at the actual price of manufacturing. But during the currently open period it will always be valuated at the price of the last released cost estimate.
    I hope I understood your scenario correct...
    Best regards,  Udo

  • Moving Averages and drilling

    Hey everyone,
    I've got the following scenario going on:
    A pivot table that has a product hierarchy and quantity sold along with a 5,10 and 20 day moving average. At the base level of the hierarchy (i.e. you haven't drilled into anything yet), the moving averages work correctly.
    But once you drill into the different product levels, the moving averages immediately stop making any sense. It's almost as if they are precomputed in some other order and then reorganized into a order that no longer makes mathematical sense.
    Does anyone know why this happens?
    Can anyone recommend how to get it to function as I would expect it to?
    thanks everyone!
    -Joe

    Serhan,
    If you are just aiming to smooth out your signal and reduce noise, than an FIR filter would work fine, but it sounds like you are trying to achieve an exact moving average.  Unfortunately, there are entire textbooks on filter design and getting the filter to accomplish that with great accuracy would be a feat.  It is true that the moving average is a form of the FIR filter.
    I had some old code that took the running average of 100 samples in SE, but I'll have to look for it when I get to work tomorrow.  I'll post again when Ifind it.
    I don't have any moving average VI's handy, but that would probably be the easiest way to accomplish this. Maybe someone can distribute their VI to Serhan?
    Rob K
    Measurements Mechanical Engineer (C-Series, USB X-Series)
    National Instruments
    CompactRIO Developers Guide
    CompactRIO Out of the Box Video

Maybe you are looking for

  • Can I take advantage of 64 bit on my late 2008 Mac Book Pro?

    I'm running Lion 10.7.4 My processor is a 2.8 ghz intel core duo. I have 4 gig of ram and want to get 4 gig more. Big Logic and Mainstage user. Thanks

  • Siri won't work in data mode

    siri does not respond in data mode.  I have tried resetting, restarting, turning siri on/off, data mode on/off.  Siri is not available in data mode.  My carrier is AT&T.

  • Filter on Lock and Send access in System 9

    Hi All, Is there a way to do a partial lock and send in a planning application using filters or other means? To explain what I mean: I have a scenario in planning which is supposed to be open for Q1'09. For rest of the periods, the scenario doesn't a

  • Error while reading deployment; Deployment problem

    Hi, I have written an ANT script that basically deploys a .war file to a remote server. both the machines are UNIX based. Iam using wls8.1 My build.xml file looks like this: <?xml version="1.0" encoding="iso-8859-1"?> <project name="dev" default="all

  • Error in reading .class files

    What kind of program opens .class files? i'm new to java technology and am very confused with all these. Can someone please help? .class files ... i think its got something to do with JVM please send me instructions on how to run .class files thanks