Moving average and standard price both maintained

Hi,
I have maintained both moving average price and standard price in material master, price control is V
is there any impact of standard price any where in the system.
Regards,
Ali

Hi,
The system considers only the price maintained in price control V or S.So Which ever price is maintained it will consider only that. As an example if you maintain price control as S and give standard price, So when you do GR against PO with different prices, You can see that system even calculates moving avg price for statistical purpose and same can be seen in material master. For for the transaction purpose only standard price will be considered.
Regards,
Atal

Similar Messages

Show both Moving Average and Standard Price of an item in Report Composer

Hello
I do follow all my items at standard price. But i wish to get on the same report both the standard price and the moving average price.
How can i do so :
1 - either by a default report
2 - Or by using report composer
3 - By using a SQL Query
Thanks
Stéphane

Thanks but is there a way to get both data on the same report ?
The solution you gave me allows me only to output two different reports....I don't mind working with a vlookup from time to time but on a daily basis, this is a bit laborious
Thanks for your continuous support
Stéphane

Moving average and standard cost

Hi All,
I purchase raw material and trading item. assuming that my raw material is based on standard cost and trading item based on moving average.
1) if both item have no more inventory, the difference price between migo and miro will charge to price difference?
2) if raw material which base on standard cost still have inventory, may i know if there is a variance for migo and miro, the difference will go to where? if inventorise then what would happen to the standard cost.
3) if trading item which base on moving average still have inventory, the variance (between migo and miro) will be added to moving average. right?
4) for raw material which base on standard cost, may i know if freight cost, custom duty and some other miscellaneous cost need to add in, how possible it can add to the standard cost?
5) for trading item which base on moving average, may i know if freight cost, custom duty and some other miscellaneous cost also will be added in moving average price?
thanks

Hi,
1) if both item have no more inventory, the difference price between migo and miro will charge to price difference?
Yes, this is correct as per Accounting Standards
2) if raw material which base on standard cost still have inventory, may i know if there is a variance for migo and miro, the difference will go to where? if inventorise then what would happen to the standard cost.
Any difference between the Standard Price in Material Master and Purchase Value (PO Price) will debit or credit the Price Difference A/c no matter whether stock exits or not.
If Material Standard Price = 100 INR
And PO Price is = 120 INR
During MIGO;
Stock Account - Dr - 100 INR
Price Difference A/c - Dr - 20 INR
GR/IR Clearing A/c - Cr - 120 INR
3) if trading item which base on moving average still have inventory, the variance (between migo and miro) will be added to moving average. right?
Yes, it will debit or credit Stock Account and will update MAP of Material accordingly if enough Stock coverage is there.
4) for raw material which base on standard cost, may i know if freight cost, custom duty and some other miscellaneous cost need to add in, how possible it can add to the standard cost?
No, all will get posted to Price Difference Account as following;
If Material Standard Price = 100 INR
And PO Price is = 120 INR and Freight = 10 INR
During MIGO;
Stock Account - Dr - 100 INR
Price Difference A/c - Dr - 20 INR
GR/IR Clearing A/c - Cr - 120 INR
Price Difference A/c - Dr - 10 INR
Freight Clearing A/c - Cr - 10 INR
5) for trading item which base on moving average, may i know if freight cost, custom duty and some other miscellaneous cost also will be added in moving average price?
Yes, it will get added to stock and will update MAP accordingly if enough Stock coverage is there.

Shifting from Moving average to standard price

Hi all
Presently we are following for all our Inhouse produced materials with Moving average price,we want to change all the materials to Standard price,is it possible to change & if in case if stock is there we will not be able to change,Shall we have to create New material codes with price control S.
whats the best solution
Thanks
Sandeep patil.

Dear,
ML is meterial ledger.
It is used in following cases.
- You have mutliple currencies and to see the stock in differnt currancies.
- You want to see the variances to be carried to different levels of BOM and see the periodic price of the product even though the price control is S.
Hence system will count all the variances and during ML closing steps calculate the variances and send to the higher level of BOM after chaning the periodic price of that raw materil. Hence at higest product level you will come to know exact production cost as well as level by level subassembly cost.
With this cost you can revaluate the material so that the S price will change to this periodic price.

Distribute moving average or standard price via ALE/IDoc

Dear experts,
do you see any way to distribute the moving average price via ALE? It is inside the material master IDoc but it won't update in the receiving system.
We need it for a decentral WM so that people can see the valuation of the material when they do inventory counting (to judge differences in LX22).
Any idea how to unlock the material master for update?
Gunter

Dear Amit,
yes - I understand how the system calculates the MAP. However, the receiving system is a SAP WMS - In WM there is no inventory management nor FI/CO. The valuation would always be zero. So I'm interested how can I update it via ALE?
It works for the first time if I have no valuation (accounting) view in the material and I send an IDoc with the view definition segment and a value for VERPR. But updating isn't possible.
Gunter

Moving average price and standard price

Dear All,
Its simple question can any one explains me what is the difference between moving average price and standard price and how the posting will happen with these two price controls and what will get updated.

Dear Tiru,
There are two types of price control as below:
a)Moving Average Price (MAP):
-If PO and or Invoice price was differ from material master record, the difference was posting
to stock account. Therefore the valuation price will change.
b) Difference between a PO price or invoice price and the material master are posted to price
difference account(PRD). As a result, the price in material master remain same.
Example:
Material Master Record:
Total Qty: 10, Total Value 20, Price 2
Scenario:
PO: 10pcs at 2.50 EUR/PC
Good receipt 10 pc
Invoice 10 pc at 2.50 eur/pc
a) MAP:
Posting:
Stock Account GR 25 +
GR/IR Clearing GR 25 -, IR 25 +
Vendor Account IR 25 -
New Material Master ,Result:
Total Qty = 20
Total value = 45
Price = 2.25
b) Standard Price:
Posting:
Stock Account GR 20 +
GR/IR Clearing GR 25 -, IR 25 +
Vendor Account IR 25 -
Price difference Account(PRD) GR 5 +
New Material Master ,Result:
Total Qty = 20
Total value = 40
Price = 2.00
Hope this help.
Loke Foong

How to get Moving Average Prince and Standard Price in BW (inventory cube).

Hi All,
Could anyone please suggest us how to get Moving Avg. Price and Standard Price for 0ic_c03 cube, i had gone through 0CO_PC_ACT_05 and 0CO_PC_ACT_02 datasource but it is not going to solve our purpose.
In SDN i had gone through few links and understood that we have to work on 0MAT_PLANT info object but i hav't not found how to work on this, though i found few SAP notes which are related to MAP. (869892, 819464, 863644).
Probably some one might worked on these MAP and Std. Price, if you could share your work which us that will be a greate help.
Highly appreciated if you share the code and steps how to work on MAP and Std. Price.
Thanks in Advance.
Akash

Hi,
You need to enhance the Standard DS of Infoobject 0MAT_PLANT and Infoobject 0MAT_PLANT to include these 2 fields.
And you need to enahance the 0IC_C03 cube to include 0MAT_PLANT and need to complete the mapping in all 3 Update rules for this added Infoobject.
<b>And you need to upload the attribute data of 0MAT_PLANT as full upload every day.</b>
In the reports , you need to dependent on Formula varibles with replacement path with standard price an MAP price attributes of 0MAT_PLANT. So if you go with these formula variables with replacement path, you should take 0MAT_PLANT characterstic into rows as a prerequiste.
If you want to avoid this prerequisite, then take a look on How to calculate with attributes values.
Other wise you need to do the calculations at 0MAT_PLANT level by a base query after every upload,and the result should be stored in TODS by APD .And then you can final report with out 0MAT_PLANT in rows upon this ODS.
You can see my contact details in my business card.
With rgds,
Anil Kumar Sharma .P
Message was edited by:
Anil Kumar Sharma

Material Moving Price and Standard Price

Hello All,
what could be the reason for having both the Moving Av.Price and Standard price in Material Master of FERT?
Can anyone explain me the business case
Thanks
Arshad
Edited by: arshad ahmed on Apr 21, 2009 8:35 AM

hi
Standard price for FERT, it is assumed that the FERT material is in_house produced and is subject to costing, that is price will be subjected to changes due to reasons which are internal. for example Inhouse cost run, manual change or costing during confirmation. This price becomes the basis for sales of teh product, where we further add other expenses like transport/insurance/ handling or any other cost before sellling it.
Moving Avg price means that the material is subject to price Variations due to Procurement or trading activity as it is a Finished material. If only activity would have been Trading then might be HAWA could have been the solution, since Procurement is involved the Moving Price indicator is there for weighted avg price updation of the material.
Best regards

CS11 &CS12- Moving Price and standard price not appering for items

Dear Gurus,
CS11 &CS12- Moving Price and standard price not appering for items.
is it a bug for my system alone\.
or a bug overall in SAP itself.
Pls advise.
Siva

Dear Siva,
Its the standard functionality of SAP.
You will not get any cost related data in the reports like CS11,CS12,CS13.
You can try CK13N(which shows the components of the BOM along with the cost) or else CK86_99.
At Functional module level execute this one CS_BOM_EXPL_MAT_V2 and ensure X is included for the
input field MBWLS.
And also check these SAP notes 177006 and 686509.
Check and revert back.
Regards
Mangalraj.S

Change costing method from Moving Average to Standard costing

Hi Expert
I need to find out the prerequisites for changing the valuation method of an item from Moving average to Standard costing.
(In the forums i found a note which discusses the change of costing method from FIFO to Moving average.)
It would be greatly appreciated if i can get a reply ASAP
Thank you
Regards
Apsara

Hi Son
Let me rephrase my previous question as i have asked it incorrectly.
Step 1. Make all quantities of the stock zero and also close all Open PO, SO etc
Step 2. change the inventory valuation method
Step 3. Enter new stock prices for the standard cost through stock revaluation. My question is can this be (step 3) done through DTW
Thank you
Kind Regards
Apsara

Is it possible to change the costing from moving average to standard??

hey all,
i wana know is it possible to change the costing from moving average to standard or vice-versa in the item master??
cheers

Hi Satish
Please look at the documentation from SAP for using this function. I just looked on my drive and can't find the document I used to have for this.
Just setting quantities to zero will not work as all open P/O, S/O, etc must also be closed before you can run the Inventory Valuation Method function. This is all detailed in the document.
I have done this successfully before for a client with over 4000 items, so I have been through the process. Please let me know if you need assistance.
Kind regards
Peter Juby

12 Month Moving Average and 12 months rolling average

Hi All,
please let me know what is difference 12 Month Moving Average and 12 months rolling average
can i get 1 example to achieve the solution

Hey suneel,
Both average are more or less same, for better understanding. go through below link, where you can get some clarifications.
http://www.brighthubpm.com/project-planning/111351-guide-to-computing-rolling-averages-for-business-forecasts/

Difference between Standard cost and standard price

Hi:
I have gone through google but i could not find any answer to the question clicking my mind. When we talk about standard cost and standard price..Should they be taken synonymously? Are these two same concepts... If there is any difference between two please do let me know..Similarly is there any difference between Actual cost and actual price. Please guide
Br

For Finished Goods, Cost is nothing but your manufacturing or procurement cost.
Where as Price is nothing but your sales price of the same Finished Goods.
Simply when you buy, it is cost and when you sell it is price.
Price includes cost + Profit or loss.
But from SAP point of view Standard Price field in Material master is Standard Cost.
Standard cost will be arrived when we manufacture or procure
Sale price will be entered in Sale order as condition value.

Accounting view:Moving avg price and standard price

Dear Friends,
Can anyone explain what for these two fiels are maintained?.....also what difference it makes with the price we maintain thru pricing procedure(considering only PR00)?......can both the prices be at the same value?......Thanks in advance

hi
The system calculates the moving average price automatically by dividing
the material value in the stock account by the total of all storage
location stocks in the plant concerned. It changes the price with each
valuation-relevant movement.
The system changes the periodic unit price if you settle the material
ledger and then save the data.
The valuation of stocks at moving average price or periodic unit price
means that the price of the material is adapted to the continual
fluctuations in the procurement price.
Standard price
     Standard price of the material
Use
     The valuation of material stocks at standard prices means that all goods
     movements are valuated at the same price over an extended period.
Procedure
     Price variances (for example, purchase price higher than standard price)
     upon goods receipt or invoice receipt are posted by the system to price
     difference accounts. This does not affect the standard price.

Moving Averages and drilling

Hey everyone,
I've got the following scenario going on:
A pivot table that has a product hierarchy and quantity sold along with a 5,10 and 20 day moving average. At the base level of the hierarchy (i.e. you haven't drilled into anything yet), the moving averages work correctly.
But once you drill into the different product levels, the moving averages immediately stop making any sense. It's almost as if they are precomputed in some other order and then reorganized into a order that no longer makes mathematical sense.
Does anyone know why this happens?
Can anyone recommend how to get it to function as I would expect it to?
thanks everyone!
-Joe

Serhan,
If you are just aiming to smooth out your signal and reduce noise, than an FIR filter would work fine, but it sounds like you are trying to achieve an exact moving average. Unfortunately, there are entire textbooks on filter design and getting the filter to accomplish that with great accuracy would be a feat. It is true that the moving average is a form of the FIR filter.
I had some old code that took the running average of 100 samples in SE, but I'll have to look for it when I get to work tomorrow. I'll post again when Ifind it.
I don't have any moving average VI's handy, but that would probably be the easiest way to accomplish this. Maybe someone can distribute their VI to Serhan?
Rob K
Measurements Mechanical Engineer (C-Series, USB X-Series)
National Instruments
CompactRIO Developers Guide
CompactRIO Out of the Box Video

Moving average and standard price both maintained

Similar Messages

Maybe you are looking for