Moving avg price and standered price how to cal in the system

Dear All,
Edited by: Mastan R reddy on Aug 24, 2011 7:57 AM

Similar Messages

"Volume not found" I have 3 iphoto_libraries stored in a external disk, while the actual files are in other external disk. Ive moved together iphotolibraries and files but: HOW CAN I TELL THE LIBRARIES WHERE TO FIND THEM NOW?

I have three iphoto_libraries stored in a external disk PASSPORT (one for each trip imovie Im making -Ive managed this way the libraries so to not confuse the trips) while the actual files are in OTHER external disk LACIE. And everything was fine: imovie find each library, could work with it, or iphoto could edit the files.
But one day everything crashed at the same time: i opened iphoto to find 3 different scenarios:
1) iphoto_library GREECE was there, but not the albums i prepared. no events. when double click in any of them: "Volume not found"
2) iphoto_library ITALY was there, and the albums i prepared too, but empty.
in both cases I can only see the photos in 'photos' because 'events' shows some events with photo preview and some with no preview, just some kind of preset clipart palm tree, but if i enter the event, photos are there but again: when double click in any item: "Volume not found"
3) iphoto_library ISRAEL was there, the albums too, when double click in any of them: all OK
The 3 libraries was managed the same way. Meaning: Ive imported photos to iphoto from external disk LACIE in a iphotolibrary stored in another external disk PASSPORT. Also: I don't have unchecked the option "copy to file" or something like that. photos where moved, not copied. Also i have all the movie_libraries in the PASSPORT as well. What happened??
Solution? Nothing yet. Ive moved now all the photo folders from LACIE together in PASSPORT with the iphotolibraries but problem persist:
HOW CAN I TELL THE LIBRARIES WHERE TO LOOK FOR THE VOLUMES NOW?
"Volumes" are the original files aren't them?
Please help. this is so annoying to try and find in the forum, to tricky to explain
I have a Macbook pro retina Yosemite 10.10.1 / iphoto 9.6 (910-29)/ iMovie 10.0.6
THANK YOU
Vicky

The 3 libraries was managed the same way. Meaning: Ive imported photos to iphoto from external disk LACIE in a iphotolibrary stored in another external disk PASSPORT.
This is not clear, especially when you say
I don't have unchecked the option "copy to file" or something like that. photos where moved, not copied.
Especially as the message you're getting is typical of a library where the ' option "copy to file" or something like that' is unchecked.
So it's a simple question:
Are you these Managed or Referenced Libraries?
A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. (You unchecked the option to copy files into the Library on import) The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management.

How to get Moving Average Price ( MAP ) & Standered Price in BW

Hi all,
I want to get the Moving Average Price ( MAP) & Standered price in BW Report.So that please suggest me
1. which Cube I have to use &
2. which datasource having that Moving Average Price ( VERPR) Field.
If having other Procedure to calculate Moving Average Price in BW .
please give me these details.
Thanks,
kiran

Hi Kiran,
0IC_C03 Cube can be used to bring the fields you require.
Please search forum post by Anil Kumar, link is not available thats why i am copying the text here.
You need to enhance the Standard DS of Infoobject 0MAT_PLANT and Infoobject 0MAT_PLANT to include these 2 fields.
And you need to enahance the 0IC_C03 cube to include 0MAT_PLANT and need to complete the mapping in all 3 Update rules for this added Infoobject.
And you need to upload the attribute data of 0MAT_PLANT as full upload every day.
In the reports , you need to dependent on Formula varibles with replacement path with standard price an MAP price attributes of 0MAT_PLANT. So if you go with these formula variables with replacement path, you should take 0MAT_PLANT characterstic into rows as a prerequiste.
If you want to avoid this prerequisite, then take a look on How to calculate with attributes values.
Other wise you need to do the calculations at 0MAT_PLANT level by a base query after every upload,and the result should be stored in TODS by APD .And then you can final report with out 0MAT_PLANT in rows upon this ODS.
please see this links
Re: 2lis_03_um and MBEW- STPRS
Re: How to get Moving Average Prince and Standard Price in BW (inventory cube).
Hope this Helps.
Thanks
CK

How to get Moving Average Prince and Standard Price in BW (inventory cube).

Hi All,
Could anyone please suggest us how to get Moving Avg. Price and Standard Price for 0ic_c03 cube, i had gone through 0CO_PC_ACT_05 and 0CO_PC_ACT_02 datasource but it is not going to solve our purpose.
In SDN i had gone through few links and understood that we have to work on 0MAT_PLANT info object but i hav't not found how to work on this, though i found few SAP notes which are related to MAP. (869892, 819464, 863644).
Probably some one might worked on these MAP and Std. Price, if you could share your work which us that will be a greate help.
Highly appreciated if you share the code and steps how to work on MAP and Std. Price.
Thanks in Advance.
Akash

Hi,
You need to enhance the Standard DS of Infoobject 0MAT_PLANT and Infoobject 0MAT_PLANT to include these 2 fields.
And you need to enahance the 0IC_C03 cube to include 0MAT_PLANT and need to complete the mapping in all 3 Update rules for this added Infoobject.
<b>And you need to upload the attribute data of 0MAT_PLANT as full upload every day.</b>
In the reports , you need to dependent on Formula varibles with replacement path with standard price an MAP price attributes of 0MAT_PLANT. So if you go with these formula variables with replacement path, you should take 0MAT_PLANT characterstic into rows as a prerequiste.
If you want to avoid this prerequisite, then take a look on How to calculate with attributes values.
Other wise you need to do the calculations at 0MAT_PLANT level by a base query after every upload,and the result should be stored in TODS by APD .And then you can final report with out 0MAT_PLANT in rows upon this ODS.
You can see my contact details in my business card.
With rgds,
Anil Kumar Sharma .P
Message was edited by:
Anil Kumar Sharma

Moving average prices and std prices

hi friends,
i have a doubt abt prices...
which will b assigned for raw materials-standard price? or avg moving price? and why?
if possible explain clearly about avg.moving price and std.price
for spit valuation what price we will use??
help me out..
thanks in advance...
venkat

Standard price are used for products that do not fluctuated frequently. It is usually used for finished or semi finished products.
Moving average price are used mainly for raw materials that are purchased externally. The advantage of using moving average price for your raw materials is that your inventory costs will always reflect the current market cost.
SAP strongly recommends that you do not select price control V for semi-finished products and finished products, because doing so will very easily cause the calculation of unrealistic valuation prices. SAP recommends:
Price control V for raw materials and trading goods; price control S for semi-finished products and products
We recommend that you only use price control V for materials procured
externally. Materials produced in-house should be subject to a
standard price control.
Generally all raw materials (ROH), spare parts (ERSA), traded goods (HAWA) etc. are assigned as moving average price (MAP) because of the accounting practice of accurately valuating the inventory of such materials. These materials are subject to the purchase price fluctuations on a regular basis.
The semi-finished goods (HALB) and finished products (FERT) are valuated with standard price because of the product costing angle. If these were to be MAP controlled, then finished/semi-finished product valuation would fluctuate due to data entry errors during backflushing of material and labour, production inefficiencies (higher cost) or efficiencies (lower cost). This is not a standard accounting and costing practice
For Split valuated material it is recommended to use Moving average price

Moving average price and standard price

Dear All,
Its simple question can any one explains me what is the difference between moving average price and standard price and how the posting will happen with these two price controls and what will get updated.

Dear Tiru,
There are two types of price control as below:
a)Moving Average Price (MAP):
-If PO and or Invoice price was differ from material master record, the difference was posting
to stock account. Therefore the valuation price will change.
b) Difference between a PO price or invoice price and the material master are posted to price
difference account(PRD). As a result, the price in material master remain same.
Example:
Material Master Record:
Total Qty: 10, Total Value 20, Price 2
Scenario:
PO: 10pcs at 2.50 EUR/PC
Good receipt 10 pc
Invoice 10 pc at 2.50 eur/pc
a) MAP:
Posting:
Stock Account GR 25 +
GR/IR Clearing GR 25 -, IR 25 +
Vendor Account IR 25 -
New Material Master ,Result:
Total Qty = 20
Total value = 45
Price = 2.25
b) Standard Price:
Posting:
Stock Account GR 20 +
GR/IR Clearing GR 25 -, IR 25 +
Vendor Account IR 25 -
Price difference Account(PRD) GR 5 +
New Material Master ,Result:
Total Qty = 20
Total value = 40
Price = 2.00
Hope this help.
Loke Foong

Material Moving Price and Standard Price

Hello All,
what could be the reason for having both the Moving Av.Price and Standard price in Material Master of FERT?
Can anyone explain me the business case
Thanks
Arshad
Edited by: arshad ahmed on Apr 21, 2009 8:35 AM

hi
Standard price for FERT, it is assumed that the FERT material is in_house produced and is subject to costing, that is price will be subjected to changes due to reasons which are internal. for example Inhouse cost run, manual change or costing during confirmation. This price becomes the basis for sales of teh product, where we further add other expenses like transport/insurance/ handling or any other cost before sellling it.
Moving Avg price means that the material is subject to price Variations due to Procurement or trading activity as it is a Finished material. If only activity would have been Trading then might be HAWA could have been the solution, since Procurement is involved the Moving Price indicator is there for weighted avg price updation of the material.
Best regards

CS11 &CS12- Moving Price and standard price not appering for items

Dear Gurus,
CS11 &CS12- Moving Price and standard price not appering for items.
is it a bug for my system alone\.
or a bug overall in SAP itself.
Pls advise.
Siva

Dear Siva,
Its the standard functionality of SAP.
You will not get any cost related data in the reports like CS11,CS12,CS13.
You can try CK13N(which shows the components of the BOM along with the cost) or else CK86_99.
At Functional module level execute this one CS_BOM_EXPL_MAT_V2 and ensure X is included for the
input field MBWLS.
And also check these SAP notes 177006 and 686509.
Check and revert back.
Regards
Mangalraj.S

I updated the iOS and now my App Store is showing prices in yen. How do I change the apps store back to the us version.

I updated the iOS and now my App Store is showing prices in yen. How do I change the apps store back to the us version.

Change to US Store
1. App Store>Featured>Apple ID (at bottom of page)
2. Tap on Apple ID>View Apple ID
4. Enter your password
5. Country/Region>Change Country or Region

Report for MM for seeing the material old price and new price

Hello friends,
For the ROH material we are maintained the Moving average price. So that material is calculated the average price of that material,
Know My clint wants old price of that material i.e. one year before And
he wants comparison report for old price and new price of the all raw materials
is there any reports are there such kind.
Regards
Pramod

Hi Pramod,
If you want to view the old and new prices on a frequent basis, u can go for an
ABAP query (SQVI) with the base table as MBEW.
Cheers
Arun.

Your Price and Retail Price are showing same value.

In my Catalog section display routing page "Your Price" and "Retail Price" are showing same value. How can I resolve this issue?

Hi Ashish,
The CUSTOMER context for qualifiers is supported at the Item / Cart levels. However, it is only supported in the Catalog when using Best Price. If using minisite based pricing, "IBE: Use Price List Associated with Specialty Site" = Yes, and/or customer account pricing, "IBE: Use Customer Account Price List" = Yes,
Then this qualifier is not referenced for the catalog pricing calls by the pricing engine.
As per the documentation link referenced above -
Pricing Qualifiers Supported by Oracle iStore
All of the pricing qualifiers that are supported by Oracle iStore are supported at the shopping cart level -- but in the catalog pages, a only subset these supported attributes are available to the pricing engine.
The following table shows the pricing attributes supported in the Customer Application. The table also shows the context for the attributes, whether they are supported in the catalog in addition to the shopping cart, and whether they are supported at item level (also known as line level) or cart level (also known as order or header level). Remember, all of the following are supported in the shopping cart; some are only supported in the catalog. Customer contexts are supported in a Best Price scenario only.
The discount will not be applied in the catalog with a CUSTOMER context qualifier on the modifier unless using Best Price for pricing. This behavior is discussed in the (Doc ID 429657.1)
Regards,
Debbie

Report displaying Material Standard Price and PO Price

Hello Experts
We have materials which are purchased. Price control is maintained as standard price and standard price is maintained using T Code MR21 periodically.
Due to this when PO price is different from standard price maintained in material master (usually PO price is higher than standard price) all price difference are posted to price difference GL at the time of GR.
Now users want to check variations between standard price and PO price for the material receipts.
Can anyone suggest me any report which provides details of standard price and PO price for the material receipts?
Thanks in advance for your help.
Satya Alapati

Nothing std I'm aware of either. You could consider using the messages 06 205/6/7 to get a warning at the time POs are created that price varies significantly from std.
Config help text below:
Set Tolerance Limits for Price Variance
In this step, you define the tolerance limits for price variances.
When processing a purchase order, the system checks whether the effective price of a PO item shows variances compared with the valuation price stored in the material master record. In addition, it checks whether the specified cash discount value is admissible.
Variances are allowed within the framework of tolerance limits. If a variance exceeds a tolerance limit, the system issues a warning or error message.
In the SAP System, the types of variance are represented by the tolerance keys. For each tolerance key, you can define percentage and value-dependent upper and lower limits per company code.
Standard settings
The standard SAP System supplied contains the following tolerance keys:
PE Price variance, Purchasing
Tolerance limit for system message no. 207. This message appears if the specified effective price exceeds the predefined tolerances when compared with the material price.
SE Maximum cash discount deduction, Purchasing
Tolerance limit for system message no. 231. This is a warning message, which appears when the specified cash discount percentage exceeds the predefined tolerances.
Note
You can specify whether the system message appears as a warning or error message using the menu options Environment -> Define Attributes of System Messages.
Activities
Maintain the tolerance limits for each tolerance key per company code.
Regards,
Nick

Find out the Selling Price and Unit Price.

Hi All,
Am trying to get the Selling and Unit Price Before an Order Creation and Quote , from the API of " QP_PREQ_PUB.PRICE_REQUEST " ,. based on Item ID , Quantity and two Modifiesrs(Price List ID and Order Type ID).
i can get Selling Price and Unit from Temp table " qp_preq_lines_tmp ". after execution of Above API .
but I am getting Unit Price correctly and about Selling Price, its dispaly the Priec as same as Unit Price only .
I Dont' know what step i missed .
Have anyone developed similar API for getting the Selling Price and Unit Price for an Item ?.
Any suggestions are appreciated.
Regards,
Shan

Hi Shan,
I saw your posting on Oracle forum that is why I am sending this email to you.
I have been using QP_PREQ_PUB.PRICE_REQUEST to pass item to get item list price thru Oracle Price Engine. I get Item list price without any issues the only thing I am stuck is when that item has multiple modifiers then item price I get is without applying modifiers.
My case: When Item KD653 3/3MAT has 'X' price list and price of that item is set to 600.00. I have a modifier defined and that includes/qualifies above item for 10% discount. So when I pass my pameters like inv_item_id, list_header_id etc I get 600.00 not 540.00. So I am passing two lines one for regular item list price (600.00) and second for modifier that I have created for this item.
Result: I get 600.00 Item Price but I don't get modified (10%) price applied to unit price. Also it doesn't recognize my list_header_id that I am passing for my modifier.
I may be missing something to trigger the modifier part. If you got case details then that will be great.
Your help will be highly appreciated in this case.
Regards,
Prakash

T-codes for uploading material prices and domestic prices?

t-codes for uploading material prices and domestic prices?
regards

Use Transaction VK11 and VK12 based on Condition type for price .
Please reward if useful.

DIFFERENCE BETWEEN GROSS PRICE, NET PRICE AND EFFECTIVE PRICE

HI FRIENDS,
CAN YOU EXPLAIN ME IN DETAIL, WHAT IS THE DIFFERENCE BETWEEN GROSS PRICE, NET PRICE AND EFFECTIVE PRICE WITH A GOOD EXAMPLE.
REGARDS.

Hi,
Example: Material Price is Rs.1000/-
& Discount is 10% and tax is 10% and freight is Rs.50/-,Fixed( it may also %)
So Here the Material Price is called Gross Price Rs.1000/-
Gross Price (Rs.1000/-) Discount {Rs100/-(10% of Rs.1000/-)}= Net Price Rs.900/-
Here Net Price Rs.900/-
Tax Rs. 90/- (Rs.900/- +Rs.90=Rs990/- is called sub-total)
Freight Rs. 50/-
Rs.1040/-
The Total Price (Rs.1040/-) is called Effective Price.
Note:
1) Total value = total quantity x price
When a price changes, the value of the stock changes, since the value is calculated from the price:( its also depends on price Control)
2) Effective (actual) price: Net price minus cash discount and plus miscellaneous provisions and delivery costs as well as non-deductible input tax.
Regards,

Moving avg price and standered price how to cal in the system

Similar Messages

Maybe you are looking for