Moving "Back" using short-cut keys

I am running Safari 3.0.2 on both Mac and PC with no probs .. but I do have a "right" hand vs "left" hand suggestion. Currently, to use a short-cut key to move back on page when browsing you must press CNTL [ .. which is great if your "left" handed and use a mouse or glidepad with your left hand and right hand is free .. but, if your use a mouse or glide pad with your right hand you can't use your left hand to go back using a short-cut key .. on Opera browser they use the "z" key to go back one page so you can be mousing with one hand and navigating with the other. So .. it would be nice if the Safari developers made a way to select your custome back page short-cut key ... Thanks.

smitz,
Welcome to Apple Discussions.
Since this is a user-to-user forum your comments will probably not be made available to any Safari development team. I believe that you could use the Safari>"Report Bugs to Apple" selection from the Safari Menu to make that recommendation.
I can go back a page using Safari in my hardware setup by using the "delete" key. I am not sure that will work on your keyboard. You may also have to use the fn key.
;~)

Similar Messages

File names missing from thumbnails when short cut keys are used

Across several Adobe products I use (Photoshop CS3 and CS6, Captivate 5 and 5.5) I don't see filenames under thumbnail images when I use short cut keys to open or save documents. This happens in Windows 7 and Windows XP.
When I use the short cuts the file names don't appear in the document window - all I see is thumbnails with nothing under them.
If I open or save through the menus I don't have this problem.
It doesn't always happen, but occurs maybe 75% of the time. Sometime the file names will appear at first, but if I navigate to another location they disappear. This only happens in the thumbnail view in the window. Other views show the file name but as they don't show the thumbnail aren't as useful when working with images.
Does anyone know what is causing this, and how I get the file names to appear?
Thanks

Here's a couple of screenshots of the problem (Photoshop CS4 and Captivate 5.5 running in Windows XP). I have the same problem with Photoshop CS3, and now CS6, running in Windows 7 on another computer. It's not so bad when you can see images, but when you're trying to find folders, or have PSDs that don't thumbnail, then it becomes a nightmare trying to open or save anything.
Thanks,
Alistar

To set the short cut key for the menu when using CommandDesign pattern

Hi All
I have a menu File which has two menu items Load and save.
Here for implementing the actionperformed iam using the command design pattern.
Now iam not able to set the short cut key for the menu item......
Please help me..............
Thanks
Arch

The Java Tutorials: [How to Use Menus|http://java.sun.com/docs/books/tutorial/uiswing/components/menu.html]
db

Unable to open a New Tab (including using the short cut key)

I can't click for a new tab. short cut key also not working. I tried to uninstall and install it again, but it is still not working. How to solve this problem?

Thank you so much for your help, greatly appreciated.

Is there a short cut key/command to repeat the last action?

In excel Alt F4 (I think) repeats your last action. I can't find a similar command or short cut key in numbers. Can anyone help me?

Kappy wrote:
Isn't it supposed to be a clone of Excel within limits? I don't use iWork.
Who said/wrote that ?
Numbers is not a clone of Excel. I doesn't share the Microsoft philosophy which include every asked feature.
Apple engineers carefully select what may be added and what must remain as dreams/wishes.
Basically, they apply the good old rule :
++-+-+-+-+-+-+-+-++
Apple Human Interface Guidelines:
Apply the 80 Percent Solution
During the design process, if you discover problems with your product design, you might consider applying the 80 percent solution‚ that is, designing your software to meet the needs of at least 80 percent of your users. This type of design typically favors simpler, more elegant approaches to problems.
If you try to design for the 20 percent of your target audience who are power users, your design may not be usable by the other 80 percent of users. Even though that smaller group of power users is likely to have good ideas for features, the majority of your user base may not think in the same way. Involving a broad range of users in your design process can help you find the 80 percent solution.
+-+-+-+-+-+-+-+-+
At this time they offer around 250 functions when Excel have about 500.
Tables are limited to 256 * 65635 cells
Numbers is slooooooooooooooooooooooooowwwwwwwwwwwwwww
Excel offer some database features, Numbers doesn't
In Excel, macros are back, they never arrived in Numbers.
Yvan KOENIG (VALLAURIS, France) samedi 30 avril 2011 22:58:32
Please :
Search for questions similar to your own before submitting them to the community

Is it possible to create a SHORT CUT key for a Workspace in CS 5.5 ?

Is it possible to create a SHORT CUT key for a Workspace using In Design CS 5.5 ?

Edit Menu > Keyboard Shortcuts > Product Area: Window Menu > Workspace Load 1st, 2nd, 3rd, etc. Create a new set and assign a shortcut

How to use short cut in MacBook Pro

How to use short cut in MacBook Pro
I cannot set short cut key on action, please advise method,
Thanks!!

Details please.
And screenshots can be so useful to clarify a question (one can use the camera-icon to attach images).
Anyway, you don’t get the option to select a Function Key in the Action Options or is the key not displayed in the Actions Panel after setting one?

Short cut key for created menu

Hello All:
    Want to know if it is possbie lt put a short cut key to a addon menu...
    I can't attach it in SBO because when it starts menu has not been generated yet, and it automatically loose it. I can't seem to capture combination keys in main main desktop using keysdown event type. Is there anything that I can use??
Sincerely Yours

Hello Bo,
You may try the form key down event. sample code:
SHIFT+P: open BP
CTRLSHIFTQ: open sales quotation
Public Sub ItemEventHandler(ByVal FormUID As String, ByRef pVal As SAPbouiCOM.ItemEvent, _
    ByRef BubbleEvent As Boolean) Handles oApp.ItemEvent
      If pVal.EventType = SAPbouiCOM.BoEventTypes.et_FORM_KEY_DOWN And pVal.Before_Action = True Then
            MsgBox("Modifier: " + CInt(pVal.Modifiers).ToString() + " Char precessed" + pVal.CharPressed.ToString())
            If pVal.Modifiers = SAPbouiCOM.BoModifiersEnum.mt_SHIFT Then
                'SHIFT+P : Open the Business Partner
                If pVal.CharPressed = 80 Then
                    oApp.ActivateMenuItem("2561")
                End If
            ElseIf pVal.Modifiers = SAPbouiCOM.BoModifiersEnum.mt_CTRL + SAPbouiCOM.BoModifiersEnum.mt_SHIFT Then
                'CTRL+SHIFT+Q: open sales quotation
                If pVal.CharPressed = 17 Then
                    oApp.ActivateMenuItem("2049")
                End If
            End If
        End If
End Sub
Regards, Yatsea

Short cut key

Hello,
I'm facing a problem in assigning short cut key ( which is not defined in the button property list) to the command buttons.
Please find the attached snapshot of my front panel vi. where in I have placed seven buttons next to each other.
My requirement :
1. In run-time i need to move focus from one button to another from right to left as well as left to right using keyboard navigation keys. How can I do it?
2. Command should be executed only if the button is pressed twice. i.e once the button is pressed it has to ask for confirmation. Is there a possibility to do it?
Thanking you,
Mr Sushmith
Thanking you,
Sushmith
Solved!
Go to Solution.
Attachments:
button.png ‏3 KB

Hello,
Can u please explain me how can I use event structure?? Or is there any other alternative?
Thank you,
sushmith
GerdW wrote:
Hi sushmith,
1) Use an event structure to capture navigation keys and to set key focus (by PropertyNode!) accordingly...
2) Use an event structure to capture the ValueChange event for those buttons. Show an additional dialog to confirm operation...
GerdW wrote:
Hi sushmith,
1) Use an event structure to capture navigation keys and to set key focus (by PropertyNode!) accordingly...
2) Use an event structure to capture the ValueChange event for those buttons. Show an additional dialog to confirm operation...
Thanking you,
Sushmith

Short cut key!!!help

I have a menu like File --> Open, Exit. I want to set the Exit menuitem to have a short cut key like 'ctrl-x'. How can I do that?? I'm using JMenu as the menu bar. Thank you.

a simple exemple :
you must add it after you defined your component (jMenu or smthingelse)
print() is the function that is called
you can do the same with CTRl+X
(use with Swing)
/** Gestion de CTRL+P (print) dans la JFrame */
          _myFrame.registerKeyboardAction(
          new ActionListener() {
               public void actionPerformed(ActionEvent ae) {
                    try {
                    print();
                    } catch (Exception ee) {
          "Print",
          KeyStroke.getKeyStroke(java.awt.event.KeyEvent.VK_P,java.awt.Event.CTRL_MASK, false),
          JComponent.WHEN_FOCUSED
hope it helps

When trying to open lightroom I get a message that says, "The lightroom.exe that the short cut refers to has been changed or moved, so the short cut will no longer work properly. Do you want to remove this short cut? The program has opened and worked fi

When trying to open lightroom I get a message that says, "The lightroom.exe that the short cut refers to has been changed or moved, so the short cut will no longer work properly. Do you want to remove this short cut? The program has opened and worked fine in the past.

You have (probably accidentally) moved or deleted the Lightroom program. You need to find it (have your operating system search for lightroom.exe) and move it back to where the shortcut expects it to be.

Short Cut Key for Personalized menu

Hi
I've created an Menu for the zoom function using personalization, Is it possible to setup a short key for the menu created
Example: for the File menu we can use Alt+F similarly is it possible to build the short cut key for the custom menu created using personalization
Please advice
thanks
Regards
Ramesh Kumar S

The Character '&' worked very well as expected...
Thanks a lot
Regards
Ramesh Kumar S

Cc2014 premiere short cut key not function in Window 7?

Hello All
Just got my premiere CC 2014 update recently somehow all the Hotkey or short cut key is not function like "space bar C or V )
the keyboard works fine "i can type"wonder if anyone have the same problem or know how to solve this problem
thank you
Kelvin
and I test with other adobe product photoshop bridge works fine, in the premiere interface i go under edit/ keyborad shortcuts on the selection tool razor tools slip tool etc none of them had the shortcut mark on the side
I try to click and create a shortcut to it but unable to, what is going on I had a few project due very soon. please help

I'm the only person that needs to save the Titles?
I do it sometimes when I want to reuse a title in more than one project.
When you export out the Titles, what happens then?
Only then does it become a separate file, suitable for importing into other projects. This is NOT necessary to export your finished video, it's only necessary if you want to reuse the title in other projects.
The Titles are photos and scrolling words, that are used together as a memoriam in different projects. So having the Titles as separate files on the HD is pretty much essential.
That's more than just a title, which in PP usually contains only text. For something this complex, it might be better to create a base project or template that contains all the elements you want to reuse, and then start new projects with that, renaming to a new project name immediately after opening the template.
For example, I have an HD Wedding project that contains all my sequences, graphics and titles ready to go in organized bins. I start by opening that project and do a Save As... using the couple's last name. That way each new project starts with the elements I need and I don't have to recreate them all the time.

Assign text to short cut keys

Is it posable to assign a web address or an e-mail address or even a text string to a particular short cut key combination?

No. What you need is a Macro program. I use iKeys, but it is having issues with Leopard. There is QuickKeys and Keyquencer as well, but not sure how they are doing with Leopard as well. Leopard changed too many things around, and apps like these find it difficult to keep up with them.

Locking out the startup short cut keys

Anyone know how to get the Intel Macs to not allow the apple-s, apple-v short cut keys on startup? I have a loaner iMac from Apple and noticed that the Open Firmware Password application only keeps the user from switching the startup disk using either the apple-c or option key on startup. Unlike the PPC versions though, it does not stop the other short cut keys.
So, anyone know how to lock down an Intel Mac like you could with the PPC ones?

Hi...
Thanks for reply..
Can u give me some detailed information.. i.e. what i have to do exactly in the c/c++ code if i will use JNI?
If possible give me the source code for that..

Moving "Back" using short-cut keys

Similar Messages

Maybe you are looking for