Moving buildings cisco prime infra 2.1

Hi,
is it possible to move a building from one campus to another if the building already exits within the "new" campus?
regards
André

After adding a new building, you can move it from one campus to another without having to recreate it.
:http://www.cisco.com/c/en/us/td/docs/wireless/prime_infrastructure/1-2/configuration/guide/pi_12_cg/maps.html#pgfId-1670891

Similar Messages

Can Cisco Prime Infra 2.1 work as syslog server

Hello all,
Customer want Cisco Prime Infra 2.1 to work as syslog server. they want to query text in syslog and get raw log file from Cisco Prime Infra. but when i see in user interface. I think that it cannot query and search text in syslog. but i am not sure whether we can get raw log file per devices from Cisco Prime Infra. Can anyone know about this.?
thanks
sompoj

Hi Sompoj,
In the prime infrastructure Syslogs are directly read from udp port 514 and then filtered
, the non SEV1 and SEV2 syslogs will be dropped and will not be entered into db . The
syslog messages will not be saved into log files .
Thanks-
Afroz
****Ratings Encourages Contributors ****

Cisco Prime Infra and SMS gateway integration

Hello,
Can anyone point me to right documents or resources to integrate cisco prime infra 2.x with SMS gateway?
Is there any way I can get SMS alerts for critical events in Cisco Prime Infra 2.x?
Any suggestion is highly appreciated.
Regards,
Girish

Not directly.
If you configure PI to email you on alerts, many carriers allow you receive SMS via an email address - i.e. <your_number>@<your_carrier>

Cisco Prime Infra 2.1 Standard Install using OVA File HD Requirements

   Hi guys,
       I wanna install the Cisco Prime Infra Standard 2.1 using the OVA File but I haven't 900 HD Space continuous in Storage.
   Two questions
       01) The Virtual Machine allocate this space (900 HD) during the install or allocate dynamically as needed ?
       02) There is a option to install the Standard Version using less HD space ?
      Thanks
      My Best Regards
      Andre Gustavo Lomonaco

Initially we installed medium when Prime 2.0 came out, however about 3 months lately we needed to upgrade to standard/pro. Upgrading the CPU/Core was seamless
Install a smaller OVA with enough cpu/cores for the standard and just add disk space later on
https://supportforums.cisco.com/document/9871606/adding-disk-space-prime-infrastructure
Its not a recommended practice but there are work around...

Cisco Prime Infra 1.2 Web server

Hello,
I have installed a version of Cisco Prime Infrastructure 1.2.11 with a kickstart .ova file on my production network.
Everything goes fine and I follow the instructions for installation ; i can ping my Cisco PI server and ssh into it as admin.
However, when I try to reach the web server via https, it does not work. I have reviewed my proxy settings and they are not to blame. The nslookup returns the IP address when I poll it. I have read elsewhere that I would need "NCS" service to be started, but I can't find anything called NCS on my Prime Infra server in CLI mode.
Anyone with a suggestion for this issue ?
Thanks
Jeremy

Actually I know what's happening ; the PnP (plug n play) setup was not configured, and so 443 port was not up.
I configured PnP using "pnp setup" command, but then I have to supply a list of certificates and keys :
Enter absolute pathname of PnP Gateway server key file:
Enter absolute pathname of PnP Gateway server certificate file:
Enter absolute pathname of Prime Infrastructure server certificate file:
I tried to do this with the private key I had for my server. I created it on my Certificate Authentication and got a .key and a .csr (certificate server request).
However when i feed them to my PnP setup I get this error :
Setup is in progress.......
Stop PnP Gateway server
OpenSSL command failed for mycert.csr and mykey.key
any idea as to why this is happening?
I read elswhere again that i need to run commands with "ncs" but I don't have "ncs" commands on my prompt...
Thank you for your time

CISCO PRIME INFRA 1.1 License

Hai Recently, we are installing cisco Prime NCS 1.1 and we are facing some issue for License.
I would like to clarrify the below licneses.
L-WCS-NCS1-M-K9
L-PINCS11-300-U
L-PINCSW11-300-U
We installed the second licnese and got 300 device limit. But we have 500 access points in our network. We are using NCS only for Wireless Management and not for Network Devices which is using LMS .
I am confused, we have additional 2 more licenses as above and why is that for??? can any one let me know these!!! Y we are using WCS-NCS license and it is having lonly 25 device limit support , which we cannot import since i already upload the second licnes. Also y this L-PINCSW11-300-u WAN license used for????

You can always remove the license if you installed the wrong license....You need to install your base first then your adder. You don't need to use the LMS or WAN as this comes free with NCS 1.1. The WCS to NCS migration comes with a free 25 ap base license. You just need to make sure you have purchased the correct license to cover your 500 ap count.
Here is another thread regarding the license:
https://supportforums.cisco.com/message/3672947#3672947
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"

Cisco Prime Infra 2.1 for Wireless and Wired Management

Hi All,
I've two CPI 2.1 physical appliances running in HA mode. Currently they are used to manage Wireless infrastructure.
Now, we are planning to buy licenses and add wired devices to CPI.
We've two separate teams. Team-A manages Wireless only and Team-B manages Wired infrastructure.
Both teams want their own Admin accounts to access CPI and they don't want to use shared credentials. If Team-A logsin with their Admin Account, they should see Cisco Prime Infrastructure dashboard and if Team-B logs in with their own Admin Account, they should see CiscoWorks LMS Dashbaord.
How can we achieve this? I can create user accounts and provide access to the CPI, but I'm not sure how to specify which dahsboard they will get access to.
Thanks,
CJ

You should consider merging team doing wired & wireless, it is difficult to manage these individually.
By any chance if you deploy 3850/3650, it is both WLC & Switch, so managing by two different teams does not make sense.
HTH
Rasika

Cisco Prime Infra 2.1 fails to import an image from file

We have a standard Cisco Prime Infrastructure 2.1 install. The software repository has been built up by importing the IOS images from the discovered network devices. To implement netflow capabilities on some 3750X switches we need to upgrade the IOS on the chassis and the NM card C3KX-SM10G. I was able to download from Cisco Support the 3750X IOS .tar file and import it from my machines local file system. However, the modules tar file c3kx-sm10g-tar.150-2.SE6.tar fails on the upload from my local file system. When I look at the import rob results they are as follows:
Image collection from source SUCCESS
Copying Image to Staging Location SUCCESS
Copying Image to Repository FAILURE
I've tried to import just the .bin file but this also fails at the same stage as above.
I've also tried to scp the file directly into the backend file structure with no success into the folder /opt/CSCOlumos/conf/ifm/swim/jobs with the other images (oddly noticed the above .tar file for the 3750X isn't listed with the other .bin files - although is available through the webGUI).
I need to distribute the NM .tar file across multiple switches and I'd prefer to use Cisco Prime for the job. Any help would be gratefully received.
Thanks.

I had (still have?) the same problem with it not copying the image over. I put in a ticket and they told me to upgrade to Prime Infrastructure 2.1-Device Pack 4 pi_2.1device_packs_4-40.ubf which helped but it still fails sometimes.
I had read a post from another thread about going through software image management to distribute and that seems to work a little better, but still fails sometimes.
So I think that there are still quite a few issues in Prime that need worked out.
We have over many switches that need software upgrades and I was hoping to do it quickly through Prime but I don't want to send out more then one image at a time to switch because I don't want it to fail. So it's a drawback right now, just doing one at a time to make sure it takes.

Cisco Prime Infra 2.2 + Third Party Inventory and configuration backup

Hi All,
I am having a doubt related to Cisco prime solution capability to do a discovery and config backup for non-cisco devices.
Requirement is to use Cisco prime to do a discovery, inventory and take configuration backup for non-cisco devices. Is it something possible out of the box ?
If not possible out of the box, is there any method to do that using any custom API ?
Can we monitor 3rd party( Non-cisco) devices using Cisco Prime 2.2 ?
Skr

Hi,
Below is supported-device list, check if your device is listed there.
http://www.cisco.com/c/en/us/support/cloud-systems-management/prime-infrastructure/products-device-support-tables-list.html
- Ashok
Please rate the post or mark as correct answer as it will help others looking for similar information

Cisco Prime Infrastructure 2.0 - no traps/info are pushed from devices

Good evening,
I have setup Cisco Prime Infrastructure 2.0 and, though I have added manually my 4 network cores as devices without any problem, I can't get a single trap or a single SNMP information to be pushed into my Cisco Prime Infra.
Here is my SNMP config on my core :
snmp-server user *edited* *edited* v3
snmp-server group *edited* v3 noauth notify *tv.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF.FFFFFFFF0F
snmp-server community *edited* RO
snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
snmp-server enable traps flowmon
snmp-server enable traps transceiver all
snmp-server enable traps call-home message-send-fail server-fail
snmp-server enable traps tty
snmp-server enable traps rf
snmp-server enable traps memory
snmp-server enable traps cpu_threshold
snmp-server enable traps eigrp
snmp-server enable traps ospf state-change
snmp-server enable traps ospf errors
snmp-server enable traps ospf retransmit
snmp-server enable traps ospf lsa
snmp-server enable traps ospf cisco-specific state-change nssa-trans-change
snmp-server enable traps ospf cisco-specific state-change shamlink interface
snmp-server enable traps ospf cisco-specific state-change shamlink neighbor
snmp-server enable traps ospf cisco-specific errors
snmp-server enable traps ospf cisco-specific retransmit
snmp-server enable traps ospf cisco-specific lsa
snmp-server enable traps flex-links status
snmp-server enable traps fru-ctrl
snmp-server enable traps entity
snmp-server enable traps ethernet cfm cc mep-up mep-down cross-connect loop config
snmp-server enable traps ethernet cfm crosscheck mep-missing mep-unknown service-up
snmp-server enable traps ether-oam
snmp-server enable traps aaa_server
snmp-server enable traps flash insertion removal
snmp-server enable traps l2tc threshold sys-threshold
snmp-server enable traps power-ethernet police
snmp-server enable traps rep
snmp-server enable traps vswitch dual-active vsl
snmp-server enable traps udld link-fail-rpt status-change
snmp-server enable traps vtp
snmp-server enable traps vlancreate
snmp-server enable traps vlandelete
snmp-server enable traps auth-framework sec-violation
snmp-server enable traps dot1x auth-fail-vlan guest-vlan no-auth-fail-vlan no-guest-vlan
snmp-server enable traps envmon fan shutdown supply temperature status
snmp-server enable traps entity-diag boot-up-fail hm-test-recover hm-thresh-reached scheduled-test-fail
snmp-server enable traps port-security
snmp-server enable traps ethernet evc status create delete
snmp-server enable traps energywise
snmp-server enable traps ipsla
snmp-server enable traps vstack
snmp-server enable traps bfd
snmp-server enable traps bgp
snmp-server enable traps bulkstat collection transfer
snmp-server enable traps cef resource-failure peer-state-change peer-fib-state-change inconsistency
snmp-server enable traps config-copy
snmp-server enable traps config
snmp-server enable traps config-ctid
snmp-server enable traps event-manager
snmp-server enable traps hsrp
snmp-server enable traps ipmulticast
snmp-server enable traps isis
snmp-server enable traps msdp
snmp-server enable traps pim neighbor-change rp-mapping-change invalid-pim-message
snmp-server enable traps bridge newroot topologychange
snmp-server enable traps stpx inconsistency root-inconsistency loop-inconsistency
snmp-server enable traps syslog
snmp-server enable traps isakmp policy add
snmp-server enable traps isakmp policy delete
snmp-server enable traps isakmp tunnel start
snmp-server enable traps isakmp tunnel stop
snmp-server enable traps ipsec cryptomap add
snmp-server enable traps ipsec cryptomap delete
snmp-server enable traps ipsec cryptomap attach
snmp-server enable traps ipsec cryptomap detach
snmp-server enable traps ipsec tunnel start
snmp-server enable traps ipsec tunnel stop
snmp-server enable traps ipsec too-many-sas
snmp-server enable traps errdisable
snmp-server enable traps ethernet cfm alarm
snmp-server enable traps vlan-membership
snmp-server enable traps mac-notification change move threshold
snmp-server enable traps vrfmib vrf-up vrf-down vnet-trunk-up vnet-trunk-down
snmp-server host *ip-address-edited* version 3 noauth *edited*
Basically all traps are enabled but absolutely nothing is showing up in my Prime Infra except that my 4 devices are "Reachable".
Here is a show snmp on the same device :
sh snmp
Chassis: *S/N Edited*
38554534 SNMP packets input
    0 Bad SNMP version errors
    14 Unknown community name
    0 Illegal operation for community name supplied
    0 Encoding errors
    38453185 Number of requested variables
    0 Number of altered variables
    17790703 Get-request PDUs
    20583581 Get-next PDUs
    0 Set-request PDUs
    0 Input queue packet drops (Maximum queue size 1000)
38490708 SNMP packets output
    0 Too big errors (Maximum packet size 1500)
    0 No such name errors
    0 Bad values errors
    0 General errors
    38371069 Response PDUs
    13 Trap PDUs
SNMP global trap: enabled
SNMP agent enabled
SNMP logging: enabled
    Logging to *edited*, 0/10, 13 sent, 0 dropped.
Can anyone point out what is wrong or missing in my configuration? I can't seem to single it out myself.
Thanks
Jeremy

Hi Jeremy,
SNMP traps are shown in the events and alerts section of PI.
SNMP config looks fine. Can you run the SNMP debug (debug snmp packets ) .check the logs and see if the device is actually sending the TRAPS to the PI server.
Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors ****

Cisco Prime 2.1 patch pi211_20140630_01.ubf install

To the Cisco Prime Community;
I have upgraded and installe dthe patch for 2.1 on the primary server. Where the HA is concerned, how would thw patch be installed ? I've tried via the command line and receive the following error;
disk: 1% used (363860 of 133885104)
temp. space 2% used (35964 of 1967952)
Internal filesystems:
all internal filesystems have sufficient free space
xxxxxx/sysadmin# patch install pi211_20140630_01.ubf defaultRepo
Save the current ADE-OS running configuration? (yes/no) [yes] ? yes
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Please ensure you have a backup of the system before proceeding.
Proceed with the patch install ? (yes/no) [yes] ? yes
Initiating Application Patch installation...
% Unable to unbundle the package. Package may be corrupt or there is not enough disk space
I received this error several times. Last time I ran a cleanup and copied the file again, please advise.

This patch is not intended to be installed from CLI. You have to update this from the GUI of Cisco Prime Infra.
To install this patch from GUI :
>> Log in to the Prime Infrastructure server using an ID with administrator privileges and choose Administration > Software Update .
>> Click Upload Update File and browse to the location where you saved the patch file. Click OK to upload the file.
>> When the upload is complete:
a. On the Software Upload page, confirm that the Name, Published Date and Description of the patch file are correct.
b. Select the patch file and click Install .
c. You will see a popup message indicating when the installation is complete. You should also see a listing for the patch in the “Updates” table, with a “Yes” opposite the patch under the “Installed” column, and a “Yes” under the “Pending Restart” column.
>> Restart the server by first executing the ncs stop command and then the ncs start command, as explained in Running Commands.
Step 7 Verify that the patch is installed by logging into the server and choosing Administration > Software Update . You should see a listing for the patch in the “Updates” table, with a “Yes” opposite the patch under the “Installed” column, and a “No” under the “Pending Restart” column.
For more details check the Release notes for PI 2.1.1.
-Thanks
Vinod
**Encourage Contributors. RATE Them.**

Cisco prime infrastructure 1.3

Hi Experts,
i am currently try to explore cisco prime Infra 1.3 and facing some problem.
1 : i have set the admin password at startup config but this password is not working(i am pretty sure that i have enter the same password)
2: Can i change the prime lan infra clock setting from it,s GUI
3: i am not able to see the end client assosiate to a cisco switch(C3750 )
4: i want to know can i use cisco infra to monitor broadcast on a switch port level.(suppose switch 1's port 10 client making broadcast ,can i monitor that)
is there is any training videos avialable for cisco prime infra 1.2/1.3 .
What else we can do at monitor level with the help of cisco prime infra 1.3
Thanks,
Prashant

Prime Infrastructure
Prime Infrastructure comes with a variety of server installation options. You will want to ensure that you have selected an option appropriate for the size and complexity of your network.
This table gives the maximum number of devices, clients, events, and Net flow data flows that Prime Infrastructure can manage for each option. Capacities for the pre-installed hardware appliance match the large option.
Scaling: Prime Infrastructure Server   Capacities (Includes Assurance)
Small
Medium
Large
Extra Large
Devices
250 total. The   mix of devices may include up to:
•Wired   Devices: 100
•Controllers:   2
•Autonomous   APs: 100
•Unified   APs: 100
•NAMs:   0
500 total. The   mix of devices may include up to:
•Wired   Devices: 300
•Controllers:   5
•Autonomous   APs: 300
•Unified   APs: 300
•NAMs:   0
10,000 total.   The mix of devices may include up to:
•Wired   Devices: 6,000
•Controllers:   500
•Autonomous   APs: 3,000
•Unified   APs: 5,000
•NAMs:   500
18,000 total.   The mix of devices may include up to:
•Wired   Devices: 13,000
•Controllers:   1,000
•Autonomous   APs: 3,000
•Unified   APs: 15,000
•NAMs:   1,000
Clients
Wired: 1,000
Wireless: 1,000
Roaming: 250
Wired: 6,000
Wireless: 4,000
Roaming: 1,000
Wired: 50,000
Wireless:   75,000
Roaming: 25,000
Wired: 50,000
Wireless:   200,000
Roaming: 40,000
Events1
100 per second2
100 per second2
300 per second2
1,000 per   second2
Netflows
0
0
16,000 flows   per second
80,000 flows   per second
For More Information, Please click on the below link:
http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.3/quickstart/guide/cpi_qsg130.html#wp41647

Class Map Statistic Dashlet in Cisco Prime Inf. 2.1

Dear All ,
I installed the demo version of Cisco Prime infra . 2.1 and I saw that there is a specific Dashlet to monitor QOS class map .
As we have some policy-map configured , it could be very interresting.
After a day spent on Google .. I didn't found how to configure it .. I found that Cbqos must be enabled on the switch/router
So I did it by entering the following cmd
snmp-server ifindex persist
snmp mib persist cbqos
But nothing . I also deployed the Cisco monitoring template for class map statistics .
Do I need another cmd to be entered or any other device or appliance from Cisco .. ?
Thanks a lot
Marc

PI 1.2 definitely does not include all the regulatory compliance features of LMS. Reference.
Even though the document says PI 1.2 will do baseline compliance, I haven't figured out how they expect you to do that.

Topology View / Service with Cisco Prime Infrastructure 2.x "PRIME-NCS-APL-K9" ????

Hi Team,
Hope you all doing well.
I just want know few thing about Cisco Prime Infra 2.x.
1st thing is does CPI2.x support Network topology View? if not then is that any other feature which can provide Network View (exa :- Map,etc)?
2nd thing is it possible to take Telnet/Ssh of discovered device from CPI2.x then how we can do that?
3rd Thing if we want to add third party device in CPI2.x then what are prerequisite for the same (Vendor MIB, etc) and procedure?
Your help will be appreciated.
Thanks,
Vishal

Hi Vishal,
Since you don't have any data as such on PI 2.1 , go ahead installed PI 2.2 on the Appliance.
Yes , you need to download , the .ISO image and burned it on DVD and start the installation.
here is the download link::
https://software.cisco.com/download/release.html?mdfid=286236028&flowid=72882&softwareid=284272932&release=2.2&relind=AVAILABLE&rellifecycle=&reltype=latest
You need to check if you are entitle for download or not.
Can we installed PI 2.2 from current PI 2.1 GUI access? No , it is not possible.
check these links for installation step::
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-2/quickstart/guide/cpi_qsg.html#pgfId-43441
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-2/hardware_install/guide/Cisco_PI_Hardware_Appliance_Installation_Guide/cpi_higmain.html#pgfId-1062344
Thanks-
Afroz
***Ratings Encourages Contributors ****

Logs from Cisco Prime

Hi Team,
I am using Cisco Prime Infra 2.0. I want to find the logs related to LWAP Templete. We have 4-5 templets created. few days back one templete has been modified and the templete was pushed to all the AP's.
So i need to know when,How and Who has modified this templete.
I am trying to get logs from Admin-->Logging Page, But it has no info about this.
Please help me in getting this logs.
Thanks in advance
Regards,
Satya.M

Hi,
I found answer for this....
Viewing Audit Logs
Prime Infrastructure provides two types of audit logs:
•Application Audit logs—Logs events that pertain to the Prime Infrastructure features. For example, you can view the application audit log to see when a particular user logged in and what actions were taken.
•Network Audit logs—Logs events related to the devices in your network. For example, you can view the network audit logs to see which user deployed a specific template and the date and time the template was deployed
Hope it should be helpful to u as'll

Moving buildings cisco prime infra 2.1

Similar Messages

Maybe you are looking for