Moving CCG from Alternate Hierarchy

Dear All,
How can i move a cost center group from Alternate hierarchy to standard hierarchy ? I have tried OKEON in standard hierarchy however it gives me an error saying that the cost center group is already present. Should I delete the CCG in alternate hierarchy. Pls advice.
best regds
Subha

Hi,
Delete the cost center group from KSH2 and add create it from OKEON.
Your problem will solve.
Regards,
Ravi

Similar Messages

  • How to deleted profit center group from alternate hierarchy

    Hi All,
    I had created a alternate profit center hierarchy in tcode kch5. I want to delete one profit center group, but system is not allowing me to delete the same.
    I tried to delete the profit center group through tcode kch2 or kch3, but system is not allowing me to so, please help me know the procedure of the same.
    Is it possible to change position of profit center group in alternate hierarchy(kch5), please let me know the procedure of changing the position of the profit center group in alternate hierarchy
    Thanks & Regards,
    Prafful Kansal

    Please select the profit centers under the group and remove first than delete the group.
    Thanks
    Mohan

  • Loading alternate hierarchy

    Hi,
    We have a source file that contains only the alternate hierarchy(Shared members). Finding a way to load it in EPMA dimension library. Is that possible? I couldnt find a suitable option in the import profile.
    we are on 11.1.2.2.300. However it was easier in 11.1.2.0 as there was an checked box "Shared" which could create all members as shared.
    Regards,
    Ragav.

    Celvin,
    Thanks for your reply.
    We are trying to import in EPMA from interface tables. We are not able to use Merge as Primary as it is creating all members as Primary members even when my source as shared. It also duplicates members when the source has a member that moved to a different hierarchy. Even Merge as Move is not suitable as it will load only primary hierarchies. Replace is also not suitable as our source does not contain the whole dimension.
    How else can we achieve loading just the alternate hierarchy? Looks like lack of functionality.
    Regards,
    Ragav.
    Edited by: ragavhere on Apr 17, 2013 12:24 PM

  • How can I see different results for alternate hierarchy?

    I have an outline with an accounts dimension with the following members (amongst others):
    Total Expenses
    Exp1 +
    Exp2 +
    Exp3 +
    Exp31 + (child of Exp3)
    Exp32 + (child of Exp3)
    Exp33 + (child of Exp3)
    I also have another dimension, let's call it DIM, with the following primary and alternate hierarchies (shares upper levels with primary):
    Primary
    A
    A1 +
    A2 +
    A3 +
    B
    B1 +
    B2 +
    B3 +
    Alternate
    A + (shared member)
    B + (shared member)
    I want to be able to do the following:
    When I select something from the primary hieararchy, I want to see the original values in Exp31, Exp32 and Exp33. When I select a member from the alternate hierarchy, I want to see these 3 expenses zeroed out. Is this possible? I can't find a way to do this since the values for shared members are taken from primary members. Is there another way to do this?
    Thanks for your help.
    Bela

    I did think of creating an alternate hierarchy in the accounts dimension which excludes the expenses I do not want to include in the total, but I have 3 different categories of expenses I want to exclude depending on the members I'm viewing, so I'll have to create that many alternate hierarchies in accounts, each excluding a specific category of expenses.
    If you have a brainwave, please let me know!
    Bela

  • Essbase Studio Alternate Hierarchy Creation error

    Hi All,
    I'm using Essbase Studio to create an alternate hierarchy. I have a dim which has shared members and I'm getting the following error msg during cube deployment:
    1. Record #1- Member Name (SKU) already used i.e. the member for which I m trying to create shared member
         I m following the same procedure mentioned in the user guide i.e.
            Step1: create a copy of the dimension element that you want to designate as a shared member(Renamed SKU_copy with SKU_Diet). By making a copy, the binding expression for this element is the same as the original dimension element (SKU_Diet).
           Step2: when you create the second hierarchy in the chain, which is the alternate hierarchy, add a user-defined membas the parent and add the new dimension element (SKU_Diet) as the child, which will be the shared member.
         Even I m able to see the shared members (SKU_Diet) under user defined member "Diet" under the preview window (both by key binding and caption binding) as wel..
         But I m unable to see the shared members in EAS console after deploying the cube from Essbase Studio to EAS Console.
    I m not able to understand what I m missing exactly,.and suggest me other ways as well for creating alternate hierarchies in Essbase Studio.
    Thanks in advance..!!

    looks like similar issue..
    https://forums.oracle.com/thread/1555956
    It will work in genaration 2 not in genration 1.
    Thanks,
    mady

  • BPC Alternate hierarchy rollup issue - require help

    Hi All,
    We are seeing a rollup issue on Alternate Hierarchies. We had set-up alternate hierarchies on our Country Dimension (DC) to assist some managerial reporting that is only relevant to one of our Operating segments.
    To show the problem, I am listing an example of our Country dimension member sheet. I have put "**" delimiter between the pertinent values to show which columns the values land under.
    ID*DescriptionPARENTH1PARENTH2FORMULAH1*FORMULAH2
    MAIN_HIER*Main Hier* ** ** ** **
    D1*DC EuropeMAIN_HIER* ** ** **
    A*Country AD1SG1* ** **
    B*Country BD1SG1* ** **
    C*Country CD1SG2* ** **
    D*Country DD1SG3* ** **
    D2--DC India*MAIN_HIER* ** ** **
    E*Country ED2--ALT_HIER* ** **
    C1*Calc Eur* ** *DC.H1.D1+DC.H1.E* **
    ALT_HIER*Alt Hier* ** ** ** **       
    SG1*Sub Reg 1* *ALT_HIER* ** ** 
    SG2*Sub Reg 2* *ALT_HIER* ** **
    SG3*Sub Reg 3* *ALT_HIER* ** **
    We have our main Country hierarchy that comes under the root parent MAIN_HIER. In addition to that on our main hierarchy we had a calculated node for Calc Europe (C1) which is supposed to be a summation of DC Europe (D1) + Country E (E). We had created an alternate hierarchy to represent a breakdown by more subregions (SG1, SG2, SG3 and Country E) within DC Europe so basically the root node of the alternate Hierarchy (ALT_HIER) should show the same amounts as the calculated node C1 on the main hierarchy.
    If we take a higher level Account dimension member like NET_SALES the values tie out but if we take a base member in the Account Hierarchy (e.g one representing Customer Sales), the values don't match with the ALT_HIER values seem being the wrong ones. It almost seems like the rollups of the Alternate Hierarchy are not accurate.
    Could you pls. shed some light on if the dimension member set-up above is wrong from any angle.
    BTW, we are on BPC 7.0M SP04 Patch 2 and SQLServer version is SQLServer 2005 EE SP3.
    Your insights would be greatly appreciated. Thanks in advance.
    Regards,
    Abhay Shanbhag

    Abhay:
    Please try below...
    Add "RollupChildren(Account.Hx.CurrentMember,"+") to all non-base members who don't aggregate properly under FORMULAHx. For instance, I have below hierarchy PARENTH1 for Balance Sheet Total Asset
    BALSHEET
    TotalAsset
    -CurrentAsset
    -NonCurrentAsset
    If CurrentAsset and NonCurrentAsset all roll up fine but TotalAsset doesn't add up. In your Dimension, put MDX formula RollupChildren(Account.H1.CurrentMember,"+") for TotalAsset and BALSHEET under FORMULAH1.
    We have this issue when we created additional hierarchies, and it took us a while to debug before I got this hint from SAP Support. Ever since it works like a charm =)
    Hope this helps
    Brian

  • Alternate Hierarchy Load into BI

    Hi,
    I have an alternate hierarchy created on Profit Center in COPA. When trying to load the same into BI, I have the following issue:
    In the infopackage, under Hierarchy Selection tab, i do not see the specific hierarchy to load, although I can see other alternate profit center hierarchies.
    I can see the hierarchy in ECC 6.0 in KES3 (active ). Since it is created under profitability analysis master data, the alternate hierarchy was created with a variant.
    Any help is high appreciated and rewarded.
    Thanks,
    Sree

    Hi,
    In order to load the Customer hierarchy first of all check if 0Customer info object is available in BI system, if not install it with dependent object like Info source and Transfer structure from BI content. Activate the data source "0CUSTOMER_LKLS_HIER" in R/3 Replicate the data source in BI. Activate Transfer structure. Create Info Package and load the data in Hierarchy.
    Regards,
    Kams

  • Having issues when creating alternate hierarchy in time dimension

    Hi Everyone
    I used How to guide of MS version 7.5 to build 2 hierarchies in time dimension.
    It worked in MS version.7.5
    But when i copied the same dimension members to NW version the alternate hierarchy (parenth2) doesn't work.
    I mentioned all the required properties for both roll ups (like parenth2,timeid,usertimeid,ISBEGINNING).
    Any idea?
    thanks
    reddy

    "This sounds confusing to me as to how a stored hierarchy can contain a shared member from a dynamic hierarchy"
    You just need to understand how things are stored in ASO for this to make sense.
    A level 0 member with no formula, even though it is in a dynamic hierarchy is still a stored member.
    -- All level 0 members that do not have formulas are stored in ASO.
    Upper level members are all "dynamically calculated".
    -- Upper level members of dynamic hierarchies are pure dynamic.
    -- Upper level members of stored hierarchies are candidates to have their values pre-aggregated and stored in a view.

  • How to move Profit centers from one hierarchy to another.

    Hi All - In Standard hierarchy in our Profit center accounting, we have in KCH6N as below and doing posting to these successfully.
    1. C1470 - 000001470 Profit center
    2. C1472 - 000001472 Profit center
    Now for some Business reason, we need to temporarily move above said profit centers in their hierarchy to another one C1410. So Users could post a journal entry and then move the profit centers back to their current location.
    After we make the change, It should be
    C1410 - 000001470 Profit center
    C1410 - 000001472 Profit center
    Can you please suggest me how to move the Profit centers from one hierarchy to another. Can you please let me know how to make this change.
    Thanks

    Hi Hoysala,
    This is not the best practice, to change profit center hierarchy node to another node, just for the sake of JV.
    If you have to allocate a cost/revenue from one cost center/profit center to another, I would advise you to use manual allocation/distribution  process, as per your business reason (Profit Center Allocation/Cost Center Allocation), rather than changing hierarchy nodes.
    You can use 3KE5-Execute Actual Assessment and 4KE5-Execute Actual Distribution from Profit Center 1470/1472 to the profit center under node C1410, without moving profit center from one node to another.
    http://veritysolutions.com.au/2012/07/03/overhead-allocations-in-sap-new-gl/
    Regards
    Javed

  • HOW TO BUILD AN ALTERNATE HIERARCHY IN HFM WITH SHARED MEMBERS

    Hi All,
    Could some one suggests the steps to build an Alternate Hierarchy in HFM via Shared Memebers. I am facing the problem while selecting options for "IMember" or "Idescendant"?
    It is urgent, any help is highly appreciated.
    Thanks in advance.
    Regards,
    SM

    It sounds to me that you are trying to create the entity again as opposed to re-using it from the Member List. Follow steps below:
    #1 - Start Hyperion Financial Management Client (Start-->Programs-->Hyperion-Financial Management-->Financial Management)
    #2 - Click on the Manage Metadata option to the left
    #3 - Click on the Open File button (assuming you have an existing file)
    #a - Browse and locate your metadata file
    #4 - Click on the Metadata Item drop down box and select entity
    #5 - If Parent 1, Parent 2, Co A, Co B have not been created, create them now. Place Co A and Co B as children of Parent 1.
    #6 - click on the tab that says Member List (by default its on Member Attributes)
    #7 - Locate Co A and Co B and drag them to Parent 2. This will add them to Parent 2.
    #8 - Save your file of course
    Hope that helps.

  • Alternate Hierarchy's

    Good Morning
    Is there any way to create an alternate hierarchy without having to use shared members? I have users who want me to duplicate a hierarchy (1000 members) but remove 1 member only from the alternate. This means having to copy the original hierarchy and making all the children shared members and making the parents unique. Is there an easier way to do this? Using Reporting software is not an option as my users all use excel.
    thanks

    Ah, another good use for the "Views" dimension.
    I would go about this with a custom dimension, I've seen called "Views". For the most part it is only 1 stored member, say "Data". But then you can have all kinds of Dynamic Calc members that are some variation of what is actually stored. So in this case you could have a Dynamic Calc member with a formula that is basically
    @sum(@Remove("@Relative("Dimension", 0), <member to be removed>)).
    It will probably be a slow retrieval, if they need it faster then consider making it stored and putting the formula in the nightly calc.
    Robert

  • Moving Favorites from PC to Mac

    Hello,
    I'm moving favorites from IE 7 on Windows XP to Mac Leopard. Do I just move the files over and import or is there something specific regarding conversions I need to complete? Thanks.

    Hi theBigD23,
    Save your Favorites in IE 7 to the desktop (or wherever you want). Use a flash drive, email the file to yourself, or any method at your disposal to get that file over to the Mac.
    In Safari, choose File > Import Bookmarks. Navigate to the bookmark file from the PC and click Import.

  • Moving Songs From PC to MAC

    i have a PC (windows xp) that was my old home computer.
    Just yesterday i changed my old computer to the newest iMac (21.5 inch) and want to use it as my iTunes home. Here are some issues i'm having:
    1: i need help moving files from a pc to mac KEEPING playlist info, play count info, date added info, etc.
    2: when i plug in my iPhone to the new Mac iTunes, all the songs on my iPhone are greyed out and can't be played.
    3: i've tried homesharing but apple said it isn't meant to save playlists info.
    4: (only at least half of my songs are purchased, the rest are from CD's so i can't do the Transfer purchasing thing)
    HELP :O

    Hello,
    Go here: http://www.myfirstmac.com/index.php/mac/articles/how-do-i-move-my-itunes-library -from-pc-to-mac-and-keep-my-settings-intact
    More help here: http://support.apple.com/kb/HT1449
    Carolyn

  • HT4889 moving files from pc to mac book

    Hi have down loaded to set up moving files from pc to mac book pro but keep getting an error message on pc  saying error occurred whilst  preparing your info for transfer ! i am running visa on pc any help pls thanks

    Look at these links.
    *How to use your iPod to move your music to a new computer*
    http://docs.info.apple.com/article.html?artnum=300173
    http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/
     Cheers, Tom

  • Why does the new operating system not delete the moved files from their original location - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it

    Why does the new operating system not delete the moved files from their original locations - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it - also, when transferring large amounts of files it becomes a very large problem remembering which files were transferred and which not.

    You're going to need to be more specific, as I'm not quite sure I understand what you're talking about.
    If you're referring to copying from an external hard drive or flash drive, and you want to actually move files rather than copy them, you can hold down the option key to force it to do a "move" rather than a "copy." This is not new behavior, though... the Mac OS has worked this way as long as I can recall (and I've been using it since 1984).
    If you're having a problem with trying to move files from one place to another on a single drive causing them to be copied instead, that is likely because of some permissions issue preventing you from actually being able to move them.

Maybe you are looking for