Moving clips and closing gap across all tracks - premiere4

HI, I have multiple clips spread across 3 tracks. There are gaps between clips that I want to make shorter - but still leaving black or empty sections. I cannot find a way to move a clip to the left so that all clips on all lanes to the right (ie afterwards) move along with it whilst keeping their relative postions vertically.
I can see how to do this by selecting everything to the right but this would be incredibly tedious. I want to be able to, say, grab a clip on track 3 at 45secs, drag it to 43 secs and all the clips on tracks 1 and 2 and 3 etc also move 2 secs to the left.
Any hints?
thanks, Greg

I have run some tests and still not getting the behaviour I want.
I started a new project and inserted three clips - one clip to each of video tracks 1, 2 and 3. I ctrl+drag the video 3 clip to the left and the other two clips (tracks 1 and 2) move but do not keep their positions relative to the track 3 clip. Instead they advance just by the length of the moved clip. This means that the length of any gaps between clips is not preserved.
The outcome can be that clips that were not overlapping are now overlapping, or clips that had a small gap between them now have a large gap.
I would really like to be able to keep the relative position of the clips when I move a single clip along the timeline.
thanks, Greg

Similar Messages

Query For Finding Yearly Opening and Closing Balance for All the Items

Hi Experts,
I am working on Query Based Report for finding the Yearly Opening and Closing Stock for all the Items
i will give yearwise selection and I want opening and closing stock in between that years
Warm Regards,
Sandip Kokate
Edited by: Sandipk on May 20, 2011 1:58 PM

Hi,
Declare @SDate DateTime
Declare @EDate DateTime
Declare @Whse nvarchar(10)
Set @SDate= (SELECT min(F_RefDate) FROM OFPR T1 where T1.[Name] ='[1%]' )
Set @EDate= (SELECT max(T_RefDate) FROM OFPR T1 where T1.[Name] ='[%1]' )
Set @Whse=(Select Max(s2.Warehouse) from OINM S2 Where S2.Warehouse = '[%2]')
BEGIN
Select @Whse as 'Warehouse', a.Itemcode, max(a.Dscription) as ItemName,
sum(a.OpeningBalance) as OpeningBalance, sum(a.INq) as 'IN', sum(a.OUT) as OUT,
((sum(a.OpeningBalance) + sum(a.INq)) - Sum(a.OUT)) as Closing ,
(Select i.InvntryUom from OITM i where i.ItemCode=a.Itemcode) as UOM
from( Select N1.Warehouse, N1.Itemcode, N1.Dscription, (sum(N1.inqty)-sum(n1.outqty))
as OpeningBalance, 0 as INq, 0 as OUT From dbo.OINM N1
Where N1.DocDate < @SDate and N1.Warehouse = @Whse Group By N1.Warehouse,N1.ItemCode,
N1.Dscription Union All select N1.Warehouse, N1.Itemcode, N1.Dscription, 0 as OpeningBalance,
sum(N1.inqty) , 0 as OUT From dbo.OINM N1 Where N1.DocDate >= @SDate and N1.DocDate <= @EDate
and N1.Inqty >0 and N1.Warehouse = @Whse Group By N1.Warehouse,N1.ItemCode,N1.Dscription
Union All select N1.Warehouse, N1.Itemcode, N1.Dscription, 0 as OpeningBalance, 0 , sum(N1.outqty) as OUT
From dbo.OINM N1 Where N1.DocDate >= @SDate and N1.DocDate <=@EDate and N1.OutQty > 0
and N1.Warehouse = @Whse Group By N1.Warehouse,N1.ItemCode,N1.Dscription) a, dbo.OITM I1
where a.ItemCode=I1.ItemCode
Group By a.Itemcode Having sum(a.OpeningBalance) + sum(a.INq) + sum(a.OUT) > 0 Order By a.Itemcode
END
I hope this will work for you.
In above query you can also user OFPR.Code, OFPR, Category OFPR.Indicator instead of OFPR.Name.
Regards
Vaibhav Anharwadkar
Edited by: Vaibhav Ancharwadkar on May 24, 2011 9:23 AM

Glitches, clicks, and pops when exporting all tracks as audio files

It's getting to crunch time, and Logic 9 has been giving me a very hard time. It's now time to export my edited tracks as mono audio files to send to a mixing engineer. I thought mono files would be a button press away. Not so.
*Background on Project*:
– Started in Logic 8, and was continued in Logic 9
– Contains only audio that was recorded using Logic
– Has take folders with Quick Swipe Comps
– Has flexed regions
– Has take folders with flexed regions in them
– Has been manually beat mapped
Steps:
1) Set each fader, on every track, to unity gain and centre panning.
2) File > Export > All Tracks as Audio Files
3) Select AIFF, 24-bit, bypass effect plug-ins, and include volume/pan automation, normalize off.
*Expected Outcome*:
I expect mono/stereo files of all of my unprocessed tracks, bounced in place with fades, flexing, and quick swipe comps applied.
*Actual Outcome*:
I get mono/stereo files with clicks, pops, and scrambled sections scattered throughout the files, within fades, and at quick swipe comping boundaries. Retrying the export may result in clicks, pops, and scrambled sections in different places.
Workaround:
While the glitching in fades and at comp boundaries seems to happen in offline bounces, it rarely happens when playing the song in realtime. Unfortunately, there's no realtime option when you "export all tracks as audio files." *My workaround is to export the tracks one at a time by bouncing the project in realtime with the desired track soloed*.
This is excruciatingly slow. To speed things up, I've taken to soloing six tracks at a time, assigning all of them to the surround output, and panning each track exclusively to a different surround channel. This way, I can do a split file surround bounce and get six mono files, each with the contents of a different track. If your audio interface does not support 6 outputs, then you'll need to download SoundFlower and use their virtual 16 channel output.

In addition to the flex algorithms being disappointingly substandard in overall tc quality, flex tracks glitch constantly--especially if there are tempo changes or crossfades. You may be able to freeze them first and then export. AlternAtively, you could try tmelocking them and then using an alternate tempo map with a single tempo, then switching back after you flex tracks are bounced.

When a cd is not recognised by gracenote data base, how do you ensure that it dowloads all together in recently added. I am trying to download a nn 8 disk compilation and itunes is putting all track 1/track2 etc together

i am trying to download a compilation of 8 cds which are not recognised by gracenote database. how do I ensure that the disks download seorately. My last try had all track 1/2/3 together rather than 1 - X in each cd

Perhaps it would be helpful for you to view the page source code of this page
http://www.alanwork.com/
As you can see, the submenu code links are immediately below the top level code, and are
wrapped in their own <UL> </UL> tag pairs.
Hope that helps

Delete clip and close gap

In Premiere Elements 11: -when I will delete a picture from the timeline in single picture show, the “delete and close gap” from edit menu or delete tab -only delete the picture, BUT DOES NOT CLOSE THE GAP!!!!
What’s wrong?

P.Konrad
The first screenshot that you posted showed the "orange" over the transitions suggesting that you had not rendered the Timeline transitions to get the best possible preview after you applied the transitions. In that state, I had no problems with Delete and Delete and Close Gap in my tests here.
In the second screenshot that you posted showed the complete Timeline content rendered...no "orange", just "green" which implies that you are now seeing the best possible preview. Again, in this state, I had no problems with Delete and Close Gap in my tests here.
From what you just wrote, it sounds like you had problems with Delete and Delete and Close Gap in the first case (with transitions unrendered), but did not when the whole Timeline content was rendered. Is that correct? If so, I cannot confirm that difference.
The first and second screenshots do not appear to show the same clips and are probably located at a different portion of the Timeline. In that case, I am still guessing that you have content above that portion of the Timeline where you are having the problem.
Right now it sounds like you have everything working. That is important. But, I would ask you to look into what I have just written to detemine if any of it applies to your specific situation.
Many thanks for the follow ups.
I have misintepreted any of your details and results, please do not hesitate to let me know.
Thank you.
ATR

Changed Macs and want to download all tracks

I changed Macs and want to download all my music from the cloud because streaming it is just hopeless.
I can't find a simple way to do that. Most people suggest selecting all, right clicking and selecting 'Download' but when I do that, 'Download' is not an option offered in the menu.
It's prolly something simple and obvious but I can't find it - anyone point me in the right direction?
For a flagship product, iTunes sure ain't simple...!
PS Using latest release of iTunes

Downloading from the cloud is not really the most efficient or efficacious way to transfer your personal data to a new computer. These Apple KB articles will help you transfer the data more efficiently:
http://support.apple.com/kb/HT4527
http://support.apple.com/kb/HT1408
http://support.apple.com/kb/HT2519
http://support.apple.com/kb/HT5872
I highly recommend the last one as the easiest method.

Moving clip and all other clips

I need to extend the duration that opening titles appear on screen. I drag them out, however, now they overlap onto the first video that follows the credits. How do you extend the duration of the credits and also move all of the following videos clips to the right in the Project?
Thanks!

I'm having the same trouble however I'm trying to do it from Leopard client to Server. This seems to be more difficult. In the past when I've moved from one mac to another, I simply copy my userfolder/Library over to the new machine and it all comes over nicely.
This does not happen on a Server. If anybody else can make any suggestions. I've got tons of saved mail on my old mac that I need to keep.

Moving Clips - and how not to lose the audio? Help needed!

Hi,
I have used Premiere Pro 6.0 quite extensively over the years and have recently moved to Premiere Pro CS5.
With Premiere Pro 6.0 I could move/drag clips on the time-line and their linked audio would move with them. If I moved the video clip to another video track, say, above an existing clip, the audio would also move to a free audio track and not automically write over any existing audio. This would allow me to easily reorder clips on the timeline by simply moving them around and using other video tracks as temporary storage locations... and not lose or write over any other existing audio.
However in Premiere Pro CS5 if I do the same thing, the video will move to the other video track I move it to, but the audio will stay in the say audio track and will write-over any existing audio when the mouse button is released. The only way around this I can find in the manual is to: (1) drag the video to the other video track, and (2) press and hold the <SHIFT> key, whilst, (3) draging the linked audio to another audio track to avoid existing audio from being over-written.
My question: Is there a configuation I can set in CS5 to allow moving/draging of clips to work like in Premiere Pro 6.0? I have already messed up multiple times in CS5 by inadvertently over-writing existing audio.
Your expert advice and recommendations would be greatly appreciated.
THANKS IN ADVANCE.

Harm,
Your reply is not helpful. Just so you know, I have read through the manual extensively and could not find an answer for my question. AND that's why I brought my question here.
Perhaps I missed something in the manual. Would you mind re-reading my question and helping me if it is so easy?!
This has been frustrating for me for the last three months and I thought I would come to this forum for some expert advice. So far I have been told that CS5 is designed to be like this (does not answer my question), and now you tell me to look up the manual (again does not answer my question).
I'm amazed by responses that miss the question entirely and give helpful suggestions like that!

MOVING CLIPS AND PLAYBACK

I MOVED A FEW CLIPS TO THE BEGINNING OF MY MOVIE WHICH THEN TELLS ME TRANSITIONS WILL BE DELETED OR CHANGED DUE TO THIS-SOMETIMES THE CLIP THEN IS SHOWING UP TWICE OR DURING PLAYBACK A CLIP PLAYS AND THEN WHEN IT SHOULD TRANSITION TO THE NEXT CLIP IM SEEING A FRAGMENT OF THE PREVIOUS CLIP. THESE EXTRA CLIPS ARE NOT ON THE TIMELINE AND I HAVE SPENT OVER 15 HOURS ON THIS PROJECT, DO I NEED TO START OVER? HELP

Hi tara,
welcome to this forum
obviously, your shift-key is broken... you should fix that..... CAPITAL letters means YELLLING!!...
you have clip#1 and clip#2; you add a dissolve between the two; you want to rearrange order, drag #2 before #1... what happens? you get an alert, that the transition will get lost - sure, behind #1 now is nothing, where should the disolve go to...? imagine the disolve as clip#1.5...- that has to be delated, to get the new order #2#1... right?
or, you get clip#2, clip#1, and finally some frames of your transition... showing a few frames of #2...(that WAS the disolve)...
make some sense?
making video needs discipline int the meaning: BEFORE starting a project, think about the final product (you are allowed to make notes on a piece of paper...) . switch to "slides view" and arrange your clip; when you're happy with order, THEN add effect, transitions etc......
have a look her to get some inspiration... or get a good book about iMovie......

Can I disable the feature which gives an image in an image map a 1 pixel blue border, thus displacing all the image links on the image map by 1 pixel and revealing gaps between all the images making up the image map?

i. e. can I remove the blue outline glow in focus in the browser?

i. e. can I remove the blue outline glow in focus in the browser?

In iTunes 10, I could type "Sinatra" in the search file, and would get a list of all tracks with "Sinatra" in any field.   In iTunes 11 I get these clever little windows, with nice arrows, but no lists to view.   What am I missing?

In iTunes 10, I could type "Sinatra" in the search file, and would get a list of all tracks with "Sinatra" in any field.   In iTunes 11 I get these clever little windows, with nice arrows, but no lists to view.   What am I missing?

Thanks for chipping in.   I discovered something after trying what you suggested.   I have quite a few collections of hits by year from Time Life and Billboard. I've eliminated duplicate tracks that appear in both collections (or other CDs for that matter), but cross-reference the CD where I deleted the track and placed in in the comments section of the CD track I retained.   If I "search" by song name, only the remaining track appears.   But if I want to hear for example Classic Rock 1964, only those tracks remaining would be there when I pull up that CD.   So, I type "Classic Rock 1964," in the search field. First the boxes on the right of the screen open up showing album icons. Showing four tracks by album with a button to view 10 more, then four songs with an option to vies 18 more.   I finally noticed that at the top of the boxes is a blue band that reads, :Show Classic Rock 1964 in Music. When I double click on this blue band, all 24 tracks from the original CD appear in the song list format even though I had deleted two of them because they appeard in a Beach Boys CD.   On those tracks, I had referenced Classic Rock 1964 in the comments field.    So, bottom line, Search will also look in the comments field if you click "filter by all" in the magnifying glass to the left of the search field.   And you can move all tracks that if finds into a song list by double clicking on the blue band.

Moving music and duplication

Hi,
I have searched about 5 or so threads that i thought might be relevant to my query, but whilst they address some of the issues, I hoped someone might be able to help with all of the issues i have.
First up, i have and Ipod and and Iphone.
What i need to do:
My music seems to be spread out in about 4 different locations on two seperate hard drives. I tend to upload music from CD's, purchase from Ituns and download music.
I have just moved house and have come across about 500 old cd's, of which i would like to put a number of CD's onto the computer and i see this as an ideall time to perhaps purchase a new hard drive or perhaps and an external one and move all of my music to one location.
My worries are the following:
1. How do i maintain my playlists as they are crucial to what goes onto my Iphone (space is at a premium).
2. How do i maintain my ratings and other information.
3. Whenever historically i have moved music around and then changed the location on itunes, i seem to get tons and tons of duplicate songs, which i then have to go through and delete.
4. If i am okay with losing my playlists, is there an easy way of itunes 'forgetting' everything and then starting over, or would i need to remove and install itunes and if this is the case, what happens with my iphone syncing?
Can anyone please help me?
thanks in advance
LEe

If it copies the music then can i assume that i can safely delete the older copy of the two?
Yes.
Do yuo think consolidating the library before moving it is the best option......
Only if you want iTunes to keep track of everything (yes, it is the best option).
if i change the location of the music folder, then consolidate, will it move ALL my music the new folder location?
Yes, this is exactly how you should do it.
Consolidate copies everything in iTunes to the location shown in iTunes prefs -> Advanced - iTunes music folder location.

After turning on iTunes Match, songs in playlist are in the wrong order across all devices.

So in iTunes, my client had several playslists, all with songs in a specific manual order. None of them are smart playlists.
After iTunes Match was activated, the song order seems to have changed in every playlist and on one iPhone where the same iTunes Match account was also enabled on.
We know they are in a different order as an iPod touch that does NOT have iTunes Match enabled yet still has the original order.
Just wondering what the best way to fix this would be. Should we manually drag the songs to the right order or is there a simpler way to revert to how they were ? Also would manually moving the update the order across all iTunes Match devices ?

This worked although it was very clumsy (we had almost 3,000 files that had to be deleted and redownloaded. I could not figure out a way to sort all of the 'exclamation points' together so it took an hour or so to scan through the entire library list and delete each file individually and/or in small groups.) The download was very straight forward. In my experience (with iTunes match turned on,) we did NOT loose our playcounts.
Going through all those files I noticed several common themes that may have triggered the problem: 1) multiple artists, 2) special characters in the song title, artist and/or album name - particularly umlauts (we have quite a few german songs in our library.) 3) very long title, artist and/or album names.
I hope that someone from Apple is aware of these issues and working on them....

Reg:Opening and Closing Stock For Plant

Hi All,
i want to calculate the opening stock and closing stock for plant wise for the given Posting Period Date.
Am having the opening balance and closing balance for all months but i need it as month wise.
considering this example,
the date is from 15.01.2010 to 15.03.2010 and for one plant
considering this example,
am having the opening stock from as 15.01.2010 to 15.03.2010 as 10,000 and the closing stock as 15,000.
but i need in month wise like below,
from 15.01.2010 to 31.01.2010 what is the opening stock and closing stock?
from 01.02.2010 to 28.02.2010 what is the opening stock and closing stock?
from 01.03.2010 to 15.03.2010 what is the opening stock and closing stock?
this is purely based on plant wise and not material wise?
could anybody say clearly how can i acheive this scenario?
i have referred MB5b,mc.9 transaction programs but still confused how to go with plant wise for a particular period?
Thanks & Regards,
Suresh
Edited by: suresh suresh on Mar 24, 2010 10:15 AM

Hi,
Refer to link below:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/c1/3766e7449a11d188fe0000e8322f96/frameset.htm
Regards,
Venkat.

General Ledger report with Op Bal , Trans Line Items and Closing Balance

Hi Experts,
My clients needs a General Ledger report which should show Opening balance and all transactions line items with closing figure in a single report for a fiscal year in the given date range wise. Can I get a report in standard sap. Waiting for your reply.
Thanks in Advance,
Arabinda Parida

Hi Parida,
There is no such report in SAP. Basically all standard report gives line items not with opening and closing balances. Anyway check mentioned transaction which may help to you.
S_ALR_87012309....It is cash journal report. Anyway you can enter GL account get opening and closing balances with all relavent transactions.
Regards
Suma

Moving clips and closing gap across all tracks - premiere4

Similar Messages

Maybe you are looking for