Moving date is before activation date

I am moving on the 26th of the month but my new activation date is not till the 30th due to the house we are moving to, not being disconnected from their provider till that day.
A Pain but not a problem.
The question I have is, where we are moving from will have our old number (and account as we are not taking the phone number with us) for about 4 days.
Presumably they could run up a massive bill in that time that we would be charged for?
Is that the case?

If you want to chat to BT about it, you can try Live Chat
They should be able to advise you.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

U201CValid Tou201D date set before the date that the report is run u2013 print u201Cnullu201D.

Hi Experts
I had a requirement for the Query, when we executing the through slection screen we will be giving 0fiscyear "from and to" dates. the "Valid to" (0date) has to check the relation of the Client partner and contract of relationship, if it is within the current date it should dipslay the report with values , if it is out of current date, it should display in the report as "null".
Logic : This report is based on the u201CClient Partneru201D and the u201CContact ofu201D relationship. If any of these relationships have a u201CValid Tou201D
date set before the date that the report is run u2013 print u201Cnullu201D.
Could anyone of you provide the inputs on this.
Thanks in advance
Thanks
Sekhar.P

IvanLevo wrote:
Could not find the /Library/Startup Items.
Good, it shouldn't be there.
For your Dock problem,
Go to your Finder "Go" menu choose "Go to Folder" and enter ~/Library/Preferences. Then delete these files then restart or log out and back in.
com.apple.Finder.plist
com.apple.dock.plist
com.apple.dock.db
com.apple.dock.extra.plist
Let us know

To delet e the data in th Active data table

Dear All,
I am not able to delete the data in the Active data table.Because i deleted the data in the change log table.Please suggest me how i can delete the data in the Active data table.
Thanks inadvance,
Regards,
Siva

Hi Siva,
Check below thread which may help u...
how delete data from acitve table
Regards,
KK.

Data warehouse VS Active data warehouse

Hi,
I was reading about active data warehousing (ADW) in a book, which says, that ADW is featured by "event-driven actions". ADW supports near-time or near-real-time decision making. eg a retail store may get to know that they are running short of some items and need to place an order.
It means that ADW is also use for controlling inventories, just like OLTP systems. This point is bit confusing for me because as per my knowledge datawarehouse is meant for decision making.
Any comments/suggestions.

"ADW supports near-time or near-real-time decision making. eg a retail store may get to know that they are running short of some items"
The ADW in this case plays the role here of alerting that the business is running short of specific items.
The following statement: "and need to place an order"
Implies that indeed an order needs to be placed. But this step in the process occurs in the OLTP system and not in the ADW.
A better example of an ADW could apply to an Airline. They may want to know how the sales of tickets are behaving during the day... almost real time... so they can make adjustments to their promotions, marketing programs, etc. Here the ADW comes to play a very significant role in providing sales information in almost real time fashion. It gives the company the advantage of analyze current behavior. The DW comes to provide a Business with the historical version... years, months, quarters, and so on.
Regards.
Edited by: HyperionNewbie on Nov 16, 2010 11:01 AM

Warning Message Should come if actual delevery date is before planned date

Dear all;
is there any settings to set
Warning Message if actual delevery date is before planned delevery date mentioned in the PO?
Thanking You;
Regards;
Joydeep Mukherjee

Hi,
Goto the below path,
SPRO->Materials MAnagement->Purchasing->Environment Data->Define Attributes of System Messages
Click on new entries & maintain your relevant message & mark it as 'W' in the category.
Regards,
Divya

Data Cleansing Before PSA data Load

Hi
In BI, one of my field was off of the data type in flat file, so got error while loading flat file to PSA, so whole file failed to load.
Do you have some idea how to cleansing the data for data type before loading to PSA or what do we do generally?
Thanks...

hi,
you can write a program to check the data type on the application server file using ABAP routine prior to loading, but even the abap routine will return error if the data types mismatches:).
Iin any case there will be a failure so i think there might not be a solution present in this case.
regards,
Arvind.

Difference between data guard and active data guard

As in subject. Can we paid for both products?

>
Is this only one difference between this Data Guards?
>
The one (active DG) is an additional feature of the other (DG)
>
BTW, is that mean that Data Guard in each version (9-11) is free on EE?
>
Yes - but you need to license the Standby Database. So it is not really "free" - but you better ask that our sales people :-)
Kind regards
Uwe Hesse
http://uhesse.wordpress.com

How to auto scroll a table to last row when using Active Data Service? 11g

Hi all,
Has anyone got any experience with the ADF Active Data Service?
I am using an af:table in combination with the ADF Active Data Service and I want the table to scroll to the latest row when new data arrives.
It is basically a simple setup:
The value attribute of my table points to a bean that extends CollectionModel and implements ActiveDataModel. This works perfectly. A soon as I receive new data in my bean, the table is automatically updated (e.g. a new row is inserted). I use JDev version: 11.1.1.3
The problem is that I can not get the scroll bar to move down to the last row automatically when new data arrives. The auto scroll only works for the client that actually performs a submit. In other words the person that submits the new data, will see his scrollbar move down, this is because I added the following code:
RowKeySet rowkeysset = chatTableBinding.getSelectedRowKeys();
rowkeysset.clear();
rowkeysset.add(getRowKey());
AdfFacesContext.getCurrentInstance().addPartialTarget(this.chatTableBinding);
This does not work for the clients that receive the new data via the Active data model. Apparently the active data service partially refreshes the table, but not in such a way that it sets the selected row to the last row?
My table definition:
<af:table value="#{pageFlowScope.chatBean.instantMessagingChatwindowBean}" var="row"
id="t1" columnStretching="last" rows="10"
styleClass="AFStretchWidth" autoHeightRows="10" contentDelivery="immediate"
horizontalGridVisible="false"
verticalGridVisible="false"
disableColumnReordering="true" displayRow="last"
rowSelection="single"
binding="#{pageFlowScope.chatBean.instantMessagingChatwindowBean.chatTableBinding}"
inlineStyle="height:80px;">
p.s.
The table is used to show incoming chat message.
I am building a chat client (taskflow) in a Webcenter application. The concept is similar of that presented by Lucas Jellemain in his blogpost on building a Google Talk Client http://www.oracle.com/technetwork/articles/jellema-googletalk-094343.html

Dan,
This is a thanks for posting your findings. You saved me quite some time.
<af:selectBooleanCheckbox id="showOnlyActiveSubscriptions" selected="true"
label="Show only active services:"
value="#{servicePortfolioBean.showOnlyActiveSubscriptions}"
autoSubmit="true" />
<af:table binding="#{servicePortfolioBean.serviceTable}" ...
partialTriggers="showOnlyActiveSubscriptions">
Of course, when I add a "ValueChangeListener" to the selectBooleanCheckbox, the PPR stops working. :( I wonder why?

Problem in Activating from New data to Active data in DSO

Hi All,
For my DSO I am fetcdhing some fields from other DSO table , through END Routine ,. After running the DTP , I am getting data for the fileds which i am fetching through routine in New data Table.
After Activating the New data table to Active data table I cant able to see my data.
ie in Active data table there is no data for the fields which i am fetching through end routine after activating the request . One more thing my request is activated sucessfully.
it shows ready for reporting.
Please help me on this................................

Hi ,
After unchecking the checkboxes mentioned in my previous post and still if you dont find data in active table then I think the problem might be because of Database Statistics not being up-to-date for your ODS tables which causes a delay in data load completion process. You can try refreshing the Database Statistics of your ODS both tables and indexes (active data table, change log table and new data table). This probably may resolve your problem.
Srikanth.

The determined activity date 03/24/2009 must be later than the system date

Hello everyone!
I am creating a contract but this error message appears when I put a validity date: "The determined activity date 03/24/2009 must be later than the system date". Where in IMG can I adjust this? Thank you.

no one responded.

Pricing conditions for the articles are getting triggered one day before the actual activation date to 3rd party systems through job WPMU.

Hi SAP Guru´s,
Currently we are sending the pricing, promotions & article master data delta load to 3rd party system from SAP ECC via SAP XI through IDOCS using daily scheduled batch jobs WPMU. IDOC segment - WP_PLU.
Here the issue is the promotion & pricing data are sent to 3rd party system one day before the actual start date.
Eg: Promotion 123456 which has start date as 15/05/2014 & ending on 30/05/2014 & was created & activated on 13/05/2014.
This promotion 123456 is getting triggered from SAP ECC through batch job on 14/05/2014 morning & 3rd party system receives the data on 14/05/2014 & the promotion are getting activated at 3rd party system end on 14/05/2014 itself which actually gets active from 15/05/2014.
Same in the case for Standard Pricing data which needs to be active from 31/05/2014 once the promotion 123456 ends on 30/05/2014.
The standard pricing data gets triggered from SAP ECC on 30/05/2014 through batch job & reaching 3rd party system on 30/05/2014 & getting activate on 30/05/2014 itself.
This creates more issues at the store end as well as affecting business.
We checked at 3rd party system end & they replied that their system considers the updated time stamp & date to activate the prices & it does not considers the actual active from & active to date. They need the data to be sent from SAP ECC on the effective date of the pricing & promotions.
Can any one help me how to change the pricing conditions beign triggered through batch job in SAP ECC based on the actual promotion & pricing conditons start date or is there any other process to trigger the data through the batch job on the actual promotion & pricing data activation date.
Thanks in Advance.
Thanks & Regards,
P.P.Shankar

Hello Shankar,
Change the lead time in the POS Outbound Profile. You can't put less than 2 days there so data for today and tomorrow will be transferred which also means you need to adjust your batch timing accordingly.
Sales and Distribution -> POS Interface -> Outbound -> Maintain Profile for POS Outbound.
See if it helps. The best option would still be that the 3rd part system considers the activtion date.
Kind Regards
Kaizad

Going form Note 2 to Note 4, can I use wifi and xfer data before activation

Already have Verizon. I want to update the Note 4 first,move over my apps and data before activating the Note 4, can I do this?
When I do, do i use the SIM card in the Note 2 in the Note 4?

PhilF61
I definitely want to make sure your new phone will be up and running just the way you want! The best way to fully transfer data will be to back up your current phone and then activate the new phone to transfer. Purchase history will be stored if you use the same Google account, and you can backup data using Verizon Cloud too: http://vz.to/1udgXIg
RuthW_VZW
Follow us on twitter @VZWSupport

BT activation date confirmed and changed 4 times! ...

Back in November last year I had placed an order to move my services (phone and BT infinity 2 at the time) to my new home (new build) and asked for an activation date of 22 December. At the time I paid for line rental for onw year in advance, which I now regret.
Shortly thereafter I started receiving messages and calls from BT stating that my services activation would be delayed and a date of Jan 26 2015 was eventually confirmed. As this date approached, I then got a message that the activation date had actually moved to May 22! Convinced it was an error of some sort (it also appeared on my account information online), I called BT and was assured that it would be much earlier than that but that they could not confirm when at the time. I called again later and it was eventually revealed to me that my current order was not progressing and they would open another.So, I had another order created with a potential activation date of Jan 30, but I was assured that they would try to fast track it. This was around Jan 15.
Time went by and I eventually received calls/messages/emails stating that a Jan 26 date was indeed confirmed for an engineer visit. The 26th came and nobody showed up. I called the next day, and the staff were apologetic about the situation and explained that it was an Openreach issue and that some work was still ongoing to get my services activated. I replied as I had before that many people in my street already had phone and broadband so surely the area was covered (the online coverage checker states that I can get BT infinity 2...). In the end a date of Jan 29 was again confirmed and I asked specifically if they were sure they could make it this time - I was assured that it would be the last slippage.
Sadly, it was not to be. Just yesterday I received a call saying that my service was again delayed and as such I would have to choose another activation date - the earliest offered being Feb 5. The reasons were again to do with Openreach not fulfilling their end of the bargain, and the fact that I was in a "bronze" zone. I replied that I was loosing count of how many times my activation date had been moved and re-confirmed, but was again assured that this would be the last time...
So now, I wait for Feb 5. I am considering cancelling my services with BT altogether but unsure of whether I would get my line rental saver payment back if I do so.
If a mod checks this and is willing to help, I would very appreciative. Thank you.

Hi estrolas3,
Thanks for posting and welcome to the forum, I'm sorry about the delay activating your line. Please use the 'contact the mods' link in my forum profile to send in your details and we'll check the order. You can find the link by clicking on my username.
Thanks
Neil
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Activating Data in ODS

Hi
I have got one ODS, for which my infopackage is desigen as do not update data if no master data exists for a characteristic.
But one of my request which is having only the entries in master data, is not getting activated in ODS.Its failing with the error "No SID found for value '00DU023R ' of characteristic 0MATERIAL". but the material 00DU023R is not there in the request at all.
Doest anyone phased this scenario before? how to activate the data in ODS?
Regards
Sriram

Hi Sriram,
What SSree is trying to see.
Go to your ODS, right click manage.
In the requests tab, choose a very old date and choose refresh. Now check if you see any red requests. These requests will prevent from activating.
On the other hand, when I see your first error, I would go to transaction RSRV, and do some consistency checks on your ODS and master data.
kr,
Tom

Missing data in few fields when activated data in DSO

Hi,
I have loaded data into a DSO. Before activating the DSO i can see the values for Sales Organization, Distribution channel and Division fields. But after activation these values disappear.
These values are maintained through CONSTANT in transformations.
Any solution please....
I hve tried it through routines also but no use... same prob.

Hi Prathish,
The data is visible in New Data Table, but when activated the values disappear.
I have reactivated the transformation and reloaded but no use..........
Any other idea.........

Moving date is before activation date

Similar Messages

Maybe you are looking for