Moving ECMI repository to a new location - cluster environment doesn't work

Hello all,
Actually, we have the "default" configuration in the ECMI properties, and we want to move to a new location the File system repository (another disk location).
After reviewing the ECM doc's we found the way and the parameters to reconfigure (ContentStorePath) and we put an absolute path ( "H:\content ') instead "Default" value , but we have an issue on this.
Because our system runs in cluster mode (2 node instances), this configuration only works fine with one node, and the other doesn't work, displaying the "Content Folder Doesn't Exists" error.
Both nodes runs' on separated machines and we want to know what is the correct way to configure this feature in a cluster environment.
Best Regards
Julio C Leyva

I should note that now my local users inside the office are getting outlook errors, showing 3 checkmarks 2 green one red, regarding the cert, and the red checked box says: The name on the certificat is invalid or does not match the name
of the site.
They can bypass the error by clicking Continue, but installing it does only work for a short time before the error comes back. I think that would result from the setup in outlook pointing towards either SRV01 or SRV01.mydomain.local instead of
mail.mydomain.com
The cert error on the android devices was saying Invalid certificate, do you want to continue, or similar, except clicking continue just paused a short while and brought up the same window.
Now I am getting an error, on the android, saying Invalid username or password - when I KNOW it is valid
In regards to DNS being set up correctly - I never had a mail. A record setup prior to purchasing the commercial cert - we just used the router IP in the phones and were able to get activesync working. For some reason with the new IP / ISP we could not access
by IP. So I got the SSL, and added a mail A record to DNS, pointing to our router IP, and our router has always routed activesync/443 traffic correctly, and none of that was changed

Similar Messages

I moved Photoshop CS5 to my new computer.. Its not working.. What to do?

I moved Photoshop CS5 to my new computer.. Its not working.. What to do?

What is not working exactly?
Did it install correctly? Accept the serial number OK? Activate OK?

I would like to copy all the songs from one Ipod into another. All the songs are into my Itunes account, I tried to drag and drop the songs from the old Ipod to the new one but it doesn't work. Is there a way to do it ?

Hello everybody,
I would like to copy all the songs from one Ipod into another. All the songs are into my Itunes account, I tried to drag and drop the songs from the old Ipod to the new one but it doesn't work. Is there a way to do it ?
I share one Itunes account with other people from my family and one person would like to keep the same songs on the new Ipod as the ones which were on the old one.
Thanks in advance for your answer.
Yan

Hello Chris,
Thanks for your answer. I was hoping for an easier answer. Too bad there is no drag and drop solution, it would have been much easier.
Thanks for answering so fast.
Bye.
Yan

I lost the original dock to my 2nd generation ipod shuffle, I have a new charger but it doesn't work. How can I charge it?

I lost the original dock to my 2nd generation ipod shuffle, I have a new charger but it doesn't work. How can I charge it?

If by "charger," you mean the USB docking cable, you need the original cable (or a compatible third-party replacement cable). A cable that is for the current 4th gen (and 3rd gen) shuffle does not work with a 2nd gen shuffle, because the connector is different.
This is the Apple replacement part (for a 2nd gen shuffle)
http://store.apple.com/us/product/MA694G/A/apple-ipod-shuffle-dock
There are third-party products that work, but make sure it is described as being for the 2nd gen shuffle. And I would avoid the ones that just seem too cheap, because there are likely to be quality issues.

Hi, I've used four different Groups when emailing for the past few years, and suddenly they have stopped working. I've tried creating new Groups but that doesn't work either. I haven't changed or done anything different and it is driving me mad......

Hi, I've used four different Groups when emailing for the past few years, and suddenly they have stopped working. I've tried creating new Groups but that doesn't work either. I haven't changed or done anything different and it is driving me mad......can anyone help, please?!

Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

My iPhone 5 only charges with my lightning port cable and only on one side. I've tried buying a new cable but that doesn't work.

My iPhone 5 only charges with my lightning port cable and only on one side. I've tried buying a new cable but that doesn't work.

Since there's no one side on a lightning cable, make an appointment with genius bar for an evaluation.

Moving still images to a new location

I am part way through creating a slide show and I would like to move the image files to a new location on my HDD. I think there is a Move tool to do this in Premiere Elements 7 without breaking the links and having to reconnect the images however I cannot find the way to do it.
Can anyone help?
Doug.

As Neale points out, the "Where is file ____ ?" message will pop up on the first "missing" file, and then PrE will help you locate the new folder/drive. For all Assets, in the same folder, once you find the first, PrE will then look in that folder and relink to all others in that folder. If you have moved several folders of Assets, you will need to do the Find, for each folder, and PrE will find all Assets in THAT folder. "Rinse and repeat... "
As a suggestion on how to set up your Project for the next time, I always create what will be my Project's root folder, with the Project's name. Below that, I will create one folder each for: Video, Audio, Music, Stills, Titles ( often use PS to create Titles as PSD files), and then point PrE to locate my Scratch Disks/Media Cache "Same as Project." Though there is a tiny performance hit, by setting that last location, it keeps everything within my Project's file structure. This allows me to Move, or, when done, Delete everything. With the exception of Captures, the Assets in each of those folders is a Copy, and the originals are still safely located on my NAS - just in case.
Good luck,
Hunt

Locate file window doesn't work

Ok, this problem occures only on our Z800 workstations.
Everything works as expected on my laptop.
When I try to relink a media file, the relink media window opens, and then I click the Locate button.
The new window ALWAYS opens in the top most level (basically My Computer in windows) and not in the last used directory.
I think it has something to do with the second problem - the path text box doesn't work. Whatever I enter there and click Return - nothing happens. It doesn't navigate to the folder specified in the path field. The only way to navigate is to go throught the folder tree on the left.
For every file I have to do it always from the top most level - that is a lot of clicking.
Also if I uncheck Use Media Browser to locate files, the default windows dialog properly navigates to the last known location of the file.
I know it's an error - since on my laptop everything works fine. The window opens in the last know location of the media file and I can easily navigate using the path field.
Any suggestions what could be the reason for this?

Jim Simon wrote:
I'm not sure if this is a bug. The Locate File dialog seems to be opening where it thinks the file might be, rather than where it was. For example, I renamed the 0000.mts file for a particular project, and when I opened Premiere Pro, Locate File went to the 0000.mts file from another project/folder, thinking that might be it.
So...if you have no other files that might be the missing file, the dialog starts at the top.
Jim,
I understand what you are saying in regard to where it thinks it might be. However if I manually type a path where a file I want to link to rathter then clicking 20 times in the folder tree, it throws a "File not accessible" error. Yet if I use the folder tree to navigate to the same file it sees it and links to it fine.
It just seems that whenever I try to manually type a path in the path address field is when the error occurs.
Are you able to manually type in a path > hit enter/return and have it link to the file?

The location bar autocomplete doesn't work for certain letters.

This is a really specific problem, the dropdown autocomplete for the location/awesome bar does not work if what I'm typing starts with the letter 'k'.

Your .zshrc is only read when you start a new shell: https://wiki.archlinux.org/index.php/Zs … tion_files

Setting window.location in javascript doesn't work unless i have an alert

I am attempting to jump to a new URL from a string that I've patched together in javascript. If I just use window.location = newurlstring firefox just reloads my current page. But it I put an alert after i set the new location, then it jumps. I have a very stripped down version of what I'm trying to do at http://www.secretarea51.com/Searches/search2.htm
That page has two buttons. Both call the same javascript function but with different parameters. One does an alert after attempting to set the new location, the other bypasses the alert. If the alert is bypassed, all that happens is the current page gets reloaded. If the alert is not bypassed, then the new page does get loaded.
You can look at the source for the page. I've stripped it down to about the bare minimum that I could to demonstrate the problem I'm having.
I'm sort of new to javascript, but as best as I can tell, there shouldn't be a difference between the two situations.
== This happened ==
Every time Firefox opened
== ever since I've tried it

Hmmm... It would seem as though the problem has to do with the type="submit" that I had in the input tags for the buttons. I took that out and now it does the jump with or without the alert.
Now I've just got to find out how to make it look like a button without the type="submit" in there. But I can do that part.
You can scratch this from the bug list or whatever this is. Maybe shift it to an oddities list or something because I still don't know why the original behavior would be different whether there's an alert or not.

Used PCUI navigation to follow up a new opportunity, but it doesn't work.

Hello,
We faced a authorization problem with PCUI Navigation. We have configured a navigation for following up other opportunity.
If the user has the SAP_ALL and SAP_NEW authorization, the navigation can work. But we changed the user authorization, the navigation doesn't work.
If we used the user at GUI, the user can follow up a new opportunity successfully.
Symptom:
Open an opportunity and click 'Create opportunity'. The EP open a new window for following up a new opportunity. But the new window is blank(If the user has sap_all and sap_new, the new window can show the new opportunity which was created by navigation).
BSP authorization setting:
BSP_APPL Authorization for BSP Applications
Application CRMD_BUS2000111, CRMD_BUS2000111_F4
View for Display in the People *

Assign the Roles to Object type will solve the issue...

How do I uninstall Firefox 4 & get previous version back? The new upgrade has problems & doesn't work for me.

How do I uninstall Firefox 4 and get the previous version back?
The upgrade has many problems and doesn't work for me.

new version is the worst Firefox ever, no lip.

Brand new today and camera doesn't work

The front facing camera works fine, although a little slow. However when using the main camera I'm left staring at a blank screen, if I put the torch on it goes off a couple of seconds, and if I take a picture (of the blackness) it either freezes or says 'unfortunately camera has stopped working' I've literally owned the phone for 5 hours and it doesn't work, any help? I've tried going to settings apps all camera and closing etc but no luck.

Hi Chimb0,
Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
I suggest you try clearing the data from the Camera application.
Menu > Settings > Apps > All > Camera > Clear Data.
If this does not work, then I suggest that you take the handset back to the place of purchase.
I apologize for any inconvenience this may cause.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

IWeb "open new page in browser" doesn't work?

On websites I have created in iWeb, the hyperlinks to a web page will not open in a new window even though I have checked that setting in the Inspector. Previously when creating websites with html I would simply add the "blank target" code but in iWeb there is no way to edit html directly. I have tried this with Safari and with Firefox, it doesn't work!
Message was edited by: Ironic Bliss

Thanks for those helpful suggestions, though I have batted around different ways of trying to get iWeb to register the "open in new window" when checked, to no avail so far, and it doesn't work with any link, whether in text or combined with an image. Taking all these points:
I have now managed to open the html using TextWrangler but I must admit it is a little beyond me to even find the string of code in question as iWeb uses so many files. It would be better if I could just get iWeb to do the work for me as it's meant to.
Strangely, when I open the website in iWeb the first time, all the pages to the left are marked in red before I've done anything! So I cannot use that as a simple check to see if a change has been made. Also I have already tried making other changes after checking the "open in new window" box before saving.
I always publish to a folder on my HD, as I am uploading to a server that is not me.com or mac.com. (Could that be the trouble? iWeb seems to generally be very unfriendly to publishing on other servers than Apple and I have had to jump through a lot of hoops with various things.)
Could it be the weird folder hierarchy created by iWeb, where there is an index.html page outside of the main folder where all the stuff is kept? So far, I have just uploaded it to the server "as is", so the contents of the main folder (which has another index.html rather strangely placed outside it) are not at the root level on the server. The folder containing them is at the root level and so is the "external" index.html. Would it work if I uploaded only the contents of the folder to the root directory on the server, and not in the folder that iWeb creates or with its "dummy" index.html outside it?
(I think in the past this has caused trouble with Google search sitemaps, and is the reason why in the end I uploaded the whole thing and not just the contents of the main folder.)
So to be clear (not that easy here), the files on the server are:
Directory > index.html plus the folder containing all the website files. So the actual website files are at a second level in a folder, not at the root level.
The easiest example where the blank target doesn't work is on the home page of one of my websites. Scroll down and there is an image of a book which has a link to a bookstore. This should open a new page in the browser, but never does. (Annoyingly, in FireFox it even kills the back button, Safari works slightly better in that respect.)
http://www.ordoastri.org/OA/Ordo_Astri.html

HT201365 How do I close my apps with new upgrade? It doesn't work when you double click home button and hold until the x comes?

I just upgraded to new iOS 7.2 and I don't know how to close out my applications? It doesn't work with the double click of home button and simply holding until the x shows?

Tap Home button twice then use an upward swipe on the preview to close the app

Moving ECMI repository to a new location - cluster environment doesn't work

Similar Messages

Maybe you are looking for