Moving Essentials from Virtual to Physical

I have been granted the great privilege of moving a Server 2012 Essentials server from a virtual machine running inside VirtualBox to a physical box. The physical box is the same one that the virtual box will be so the Linux distro will be wiped out.
I have no problem wiping out the OS and installing from scratch. The question I have is what can be backed up and restored in the way of AD so that I can have little impact on the workstations? Do I have the option to restore AD so that the
DC and all workstations will be imported to the new install? I do not want to go around to all workstations to join the domain again and run into profile issues. Thanks for any input.
Jon

-->The question I have is what can be backed up and restored in the way of AD so that I can have little impact on the workstations?
before moving, backup...windows server backup to backup the all state of server...
Best,
Howtodo

Similar Messages

Convert the BW and PI database servers from virtual to physical servers

Hi all,
         converting the BW and PI database servers from virtual to physical servers.
         what is the difference between Virtual & pysical database servers?
         How do we carry out the conversion?

This [link|http://www.itworld.com/virtualization/59444/virtually-compliant-enough] may useful to you.

Copying or moving video from your Event Library to an external hard disk

I have a Network Drive where I'm used to putted all my iMovie08 files.
I'm start using iMovie09 and i'm no longer able to have my *files/library in a network drive*. Did apple remove this functionality? If this is true this is unbelievable because now a days everything goes to network storage. On iTunes i can have my library virtually anywhere. I need to have the same behavior when i'm using iMovie.
Can someone help me?
with my best regards,
Paulo
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Copying or moving video from your Event Library to an external hard disk
If you want to save space on your computer’s hard disk, you can move your stored video in your Event Library to a compatible external hard disk connected to your computer with a FireWire or USB 2.0 cable.
You can also copy Events to another hard disk. You might do this, for example, if you want to create a duplicate copy of your video library or an Event on a friend’s hard disk.
NOTE:When using an external hard disk with iMovie, make sure it has been formatted as Mac OS Extended (Journaled).
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

- If i understood correctly, the solution you propose will replace completely my hard disk library with NAS location.
- What i need (because when i'm travelling i dont have my NAS) is to have both. My hard disk library and the ability to copy/move (drag & drop within iMovies09 ) events and projects to my NAS at my description as i use to do on iMovies08.
And yes all my NAS locations appears with and yellow flag on iMovies09.
best regards,
Paulo

[svn:fx-trunk] 4982: Moving DataGroup from item based lookup to an index based lookup.

Revision: 4982
Author: [email protected]
Date: 2009-02-16 23:31:05 -0800 (Mon, 16 Feb 2009)
Log Message:
Moving DataGroup from item based lookup to an index based lookup. Also, we now cleanup old item renderers when the dataProvider changes. This solves some memory leak problems.
Because of this, we should now be able to deal with duplicate items again.
We still need to work on data collection changes in the virtual layout case.
QE Notes: Please add the tests for dup items back in
Doc Notes: -
Bugs: SDK-19245, SDK-18043
Reviewer: Hans
tests: checkintests, DataGroup and FxList mustella tests (some new ones failed, but are really due to SDK-19287, and these tests should be excluded to that bug now)
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-19245
http://bugs.adobe.com/jira/browse/SDK-18043
http://bugs.adobe.com/jira/browse/SDK-19287
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/DataGroup.as

GREAT info, but it may be helpful to note that when replacing a portion of the variable "Countries" with a whitespace character, you may cause the workflow to fail in a few specific cases (certain lookup fields will not accept this and will automatically
cancel). I only found this out when recreating your workflow on a similar, but much more complex list set.
To resolve this issue, I used another utility action (Extract Substring from Index of List) to clear out the whitespace. I configured it as "Copy from
Variable: Countries, starting at
1 (Output to Variable: Countries), which takes care of this issue in those few cases.
Otherwise, WOW! AWESOME JOB! Thanks! :)

Problems moving distribution from one environment toanother

Hi all,
Problems moving distribution from one environment to another
Initially we have the environment as below:-
Production :-
Server1 : AIX Environment manager (dealing with conductor, web, db)
Server2 : NT Node manager (dealing with outlook)
Development :-
Server3 : NT Environment manager (dealing with conductor, web, db)
Server4 : NT Node manager (dealing with outlook)
Currently, we intended to change the production environment via
changing the Server1 to Server3, as the new environment
manager, while the node manager unchanged.
Things that we've done in Server2, the node manager for
production environment:-
1) Pointing to Server3 instead of Server1, by changing Forte
Control Panel and changing registry entry.
2) Re-deploy the needed libraries in the new environment, so
that it can has the updated version.
3) Re-olegen the vb component.
4) Re-deploy the whole application.
However, we're facing the following problems/error messages
for the newly deployed Forte application:
1) Failed to bind to object named (/wfuseraccessobj/odbso/1)
2) Failed to bind to object named (/wfuseraccessobj/emailso/1)
These errors are actually refer to the libraries that used by
Conductor in order to perform database retrieval, and emailing
functions. These functions were worked properly in the initial
environments.
NOTE: The first error could be okay when refreshing the internet browser
(as our system is a web-based system), somehow it keeps on occurring every
now and then.
Please advice on this matter and reply ASAP as the project
delivery is crucial for our side.
Errors:
ERROR 1:
registering agent anchor /WorkFlow/centrale/lmseng/Agents/EngineUnit_Unit1
Attached to manager for node CHARON.
23-Nov-1999 17:38:32: EngineShell.SetEngine: Unit1: changing engine state
to
ONLINE
23-Nov-1999 17:38:32: EngineShell.SetEngine: Unit1: trying to remove old
shell anchor
23-Nov-1999 17:38:32: EngineShell.SetEngine: Unit1: creating engine object
23-Nov-1999 17:38:32: EngineShell.SetEngine: Unit1: engine object created
23-Nov-1999 17:38:32: EngineShell.SetEngine: Unit1: attaching database
service
23-Nov-1999 17:38:33: EngineShell.SetEngine: Unit1: connected to database
23-Nov-1999 17:38:33: EngineShell.SetEngine: Cold-starting engine... 0
23-Nov-1999 17:38:35: EngineShell.SetEngine: Unit1: registering shell
anchor
23-Nov-1999 17:41:31: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
23-Nov-1999 17:41:33: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
23-Nov-1999 17:41:34: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
23-Nov-1999 17:41:34: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
23-Nov-1999 17:42:54: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
23-Nov-1999 17:42:56: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
ERROR 2:
registering agent anchor /WorkFlow/centrale/lmseng/Agents/EngineUnit_Unit1
Attached to manager for node CHARON.
13-Oct-1999 16:45:40: EngineShell.SetEngine: Unit1: changing engine state
to
ONLINE
13-Oct-1999 16:45:40: EngineShell.SetEngine: Unit1: trying to remove old
shell anchor
13-Oct-1999 16:45:40: EngineShell.SetEngine: Unit1: creating engine object
13-Oct-1999 16:45:40: EngineShell.SetEngine: Unit1: engine object created
13-Oct-1999 16:45:40: EngineShell.SetEngine: Unit1: attaching database
service
13-Oct-1999 16:45:43: EngineShell.SetEngine: Unit1: connected to database
13-Oct-1999 16:45:43: EngineShell.SetEngine: Cold-starting engine... 0
13-Oct-1999 16:45:47: EngineShell.SetEngine: Unit1: registering shell
anchor
13-Oct-1999 16:49:58: Build: Exception raised of type ActivityException and
severity 3: A TOOL execution exception caught in ReadyAction().
13-Oct-1999 16:49:58: Build: Exception raised of type ActivityException and
severity 3: Exception in activity TempReview (4) will cause an abort of
process LMSPD (10).
SYSTEM ERROR: Exception in activity TempReview (4) will cause an abort of
process LMSPD (10).
Class: ErrorException
Error #: [2, 122]
Detected at: OfferedActivity.Activity.AbortProcessInException()
Error Time: Wed Oct 13 16:49:58
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
INFORMATION: Stack Trace for Exception:
No 4gl Traceback
Class: qqsp_ErrorDescriptor
Error Time: Wed Oct 13 16:49:58
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
SYSTEM ERROR: A TOOL execution exception caught in ReadyAction().
Class: ErrorException
Error #: [2, 107]
Detected at: OfferedActivity.ReadyAction
Error Time: Wed Oct 13 16:49:58
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
INFORMATION: Stack Trace for Exception:
No 4gl Traceback
Class: qqsp_ErrorDescriptor
Error Time: Wed Oct 13 16:49:58
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
SYSTEM ERROR: The attribute firstReviewerID is not available in this
accessor.
Class: qqsp_UsageException with ReasonCode: SP_ER_PARAMETERERROR
Error #: [15, 1206]
Detected at: AttributeAccessor.AttributeAccessor.Find()
Last TOOL statement: method TempReview.OnReady
Error Time: Wed Oct 13 16:49:58
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
Begin Stack Backtrace
==========================================================
Trace caused by a segmentation or access violation in the Forte executable:
Application: WFEngineUnit_cl1
Platform: PC / NT
Partition: WFEngineUnit_cl1_Part1
Generated: 02-Jun-1998 19:10:20
By: ftexec Version 3.0.G.2
Fault at 13-Oct-1999 16:49:58, pid '2441', node 'CHARON':
User Name: SYSTEM
Machine Name: CHARON with 2 CPU(s)
OS version 4.0
Loading symbols for ...
d:\forte\install\bin\QQCT.dll
d:\forte\install\bin\QQSH.dll
d:\forte\userapp\wfengine\cl1\wfengi1.exe
d:\forte\install\bin\QQKN.dll
d:\forte\install\bin\QQSM.dll
d:\forte\install\bin\QQDO.dll
d:\forte\install\bin\QQCM.dll
d:\forte\install\bin\QQRT.dll
d:\forte\userapp\ofcustom\cl0\libofcus.dll
d:\forte\install\bin\QQHD.dll
d:\forte\install\bin\QQDB.dll
d:\forte\install\bin\QQDS.dll
d:\forte\install\bin\QQDD.dll
d:\forte\userapp\wfcustom\cl0\libwfcus.dll
d:\forte\userapp\wfenvdef\cl1\libwfenv.dll
d:\forte\install\bin\QQEM.dll
d:\forte\install\bin\QQFO.dll
d:\forte\install\bin\qqtlnt.dll
d:\forte\install\bin\w3tpwss.dll
C:\WINNT\System32\rpcltc1.dll
C:\WINNT\System32\comctl32.ocx
d:\forte\install\bin\QQRP.dll
C:\WINNT\System32\OLEPRO32.DLL
C:\WINNT\System32\WINSPOOL.DRV
C:\WINNT\System32\MFC40.DLL
C:\WINNT\system32\OLEAUT32.dll
C:\WINNT\System32\rnr20.dll
C:\WINNT\System32\IMM32.dll
C:\WINNT\system32\msafd.dll
C:\WINNT\System32\wshtcpip.dll
C:\WINNT\System32\WS2HELP.dll
C:\WINNT\System32\WS2_32.dll
C:\WINNT\System32\WSOCK32.dll
C:\WINNT\System32\MSVCRT40.dll
C:\WINNT\system32\COMCTL32.dll
C:\WINNT\system32\ole32.dll
C:\WINNT\system32\SHELL32.dll
C:\WINNT\system32\comdlg32.dll
C:\WINNT\system32\ADVAPI32.dll
C:\WINNT\system32\RPCRT4.dll
C:\WINNT\system32\USER32.dll
C:\WINNT\system32\GDI32.dll
C:\WINNT\system32\KERNEL32.dll
C:\WINNT\System32\ntdll.dll
C:\WINNT\system32\MSVCRT.dll
C:\WINNT\System32\MSVCIRT.dll
Stack backtrace ...
wfengi1 004edd89 (017bb4f0,019e85e0,046bfe34,016a0c08)
wfengi1 004e29d1 (017bb4f0,019f1fc0,00000000,00f039d0)
wfengi1 004e2ecb (017bb4f0,00000024,019e85e0,019f1f98)
wfengi1 004e4503 (017bb4f0,019e85e0,01a20025,01a22868)
QQKN 005dc66f (017bb4f0,019e85e0,019f0025,01a22848)
QQKN 005df7a5 (017bb4f0,019e85e0,01a22890,01a22848)
QQKN 00697109 (017bb4f0,00000000,00f039d0,00f039d0)
QQSH 0027c47b (017bb4f0,0161b9d8,00000000,017bb4f0)
QQKN 0067f24f (01619c14,017bb4f0,f34a8eb8,046bffb8)
QQKN 0067e2d5 (01619c14,00000000,00000000,00f039d0)
MSVCRT 780099ed (00f039d0,00000000,00000000,00f039d0)
KERNEL32 77f04f2c (78009990,00f039d0,00000000,00905a4d)
QQCT 00000000 (00000000,00000000,00000000,00000000)
End of Stack Backtrace
=========================================================
13-Oct-1999 16:50:10: Build: Exception raised of type TimerException and
severity 3: Exception in timer OneWorkingDayTimer (3) will cause an abort
of
process LMSPD (10).
SYSTEM ERROR: Exception in timer OneWorkingDayTimer (3) will cause an abort
of process LMSPD (10).
Class: ErrorException
Error #: [8, 111]
Detected at: ElapsedTimer.PTimer.FinishExpiration()
Error Time: Wed Oct 13 16:50:10
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
INFORMATION: Stack Trace for Exception:
No 4gl Traceback
Class: qqsp_ErrorDescriptor
Error Time: Wed Oct 13 16:50:10
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
FATAL ERROR: System segmentation/access violation caught.
Class: qqos_SystemException
Error #: [101, 321]
Detected at: qqos_MainExFilter at 1
Error Time: Wed Oct 13 16:50:10
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
ERROR: qqlo_LomTaskInitiator::Run: Asynchronous task exiting:
The following error was not on the error stack:
FATAL ERROR: System segmentation/access violation caught.
Class: qqos_SystemException
Error #: [101, 321]
Detected at: qqos_MainExFilter at 1
Error Time: Wed Oct 13 16:50:10
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
ERROR: TMgr.Terminate: fatal error terminated partition

Lori,
Yes. I organize all my film rolls by name. If I import new pictures that don't fit into an existing film roll name I create a new film roll with a name appropriate to the theme of the new pictures. No problem with this.
However, if I import pictures at a later date that I want to move to an existing film roll, there is a problem if scrolling is required to bring the existing film roll into view in the display pane.
For example, I have a film roll called "Flowers & Plants". I later import a roll that contains some pictures that I want to move to the Flowers & Plants roll. The Flowers & Plants roll is not visible in the display pane so scrolling is necessary. I select and drag the new pictures up (the new film roll is always at the bottom of the display pane) to reveal the Flowers & Plants film roll. However, the film rolls scroll by so fast it is virtually impossible to stop on the Flowers & Plants roll's title bar.
This was not a problem with earlier versions of iPhoto on slower Macs. I really appreciate the much improved iPhoto/Mac performance but I wish there were some way to control this aspect.
I hope this helps.
Thanks.
Mike

Fix stacks or decouple them from Virtual Copies

Stacking is too limited if it can only be used in a generic folder views without using keywords or criteria to also filter the images down. Worse, virtual copies seem to be accessible only via stacking. So when stacking is disabled then virtual copies are inaccessible and you can't even tell they exist! LR should either allow access to virtual copies without stacking so they can be accessed anytime OR expand stacks to work all the time OR AT LEAST grey out the create virtual copy command when stacking isn't permitted so we don't sit there creating virtual copies and then can't access them and wonder why not. It's taken me two days to sort out this limitation all the while thinking that I had shut stacking off and/or that LR was broken.

Stacking is very limited indeed! This is one of the main reasons why I moved away from iPhoto.
Photo Books in the Aperture trial, better keyword handling and better Stacking are what is making me want to eBay LR and go with AP.

Moving Favorites from PC to Mac

Hello,
I'm moving favorites from IE 7 on Windows XP to Mac Leopard. Do I just move the files over and import or is there something specific regarding conversions I need to complete? Thanks.

Hi theBigD23,
Save your Favorites in IE 7 to the desktop (or wherever you want). Use a flash drive, email the file to yourself, or any method at your disposal to get that file over to the Mac.
In Safari, choose File > Import Bookmarks. Navigate to the bookmark file from the PC and click Import.

Moving Songs From PC to MAC

i have a PC (windows xp) that was my old home computer.
Just yesterday i changed my old computer to the newest iMac (21.5 inch) and want to use it as my iTunes home. Here are some issues i'm having:
1: i need help moving files from a pc to mac KEEPING playlist info, play count info, date added info, etc.
2: when i plug in my iPhone to the new Mac iTunes, all the songs on my iPhone are greyed out and can't be played.
3: i've tried homesharing but apple said it isn't meant to save playlists info.
4: (only at least half of my songs are purchased, the rest are from CD's so i can't do the Transfer purchasing thing)
HELP :O

Hello,
Go here: http://www.myfirstmac.com/index.php/mac/articles/how-do-i-move-my-itunes-library -from-pc-to-mac-and-keep-my-settings-intact
More help here: http://support.apple.com/kb/HT1449
Carolyn

HT4889 moving files from pc to mac book

Hi have down loaded to set up moving files from pc to mac book pro but keep getting an error message on pc saying error occurred whilst preparing your info for transfer ! i am running visa on pc any help pls thanks

Look at these links.
*How to use your iPod to move your music to a new computer*
http://docs.info.apple.com/article.html?artnum=300173
http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/
 Cheers, Tom

Why does the new operating system not delete the moved files from their original location - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it

Why does the new operating system not delete the moved files from their original locations - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it - also, when transferring large amounts of files it becomes a very large problem remembering which files were transferred and which not.

You're going to need to be more specific, as I'm not quite sure I understand what you're talking about.
If you're referring to copying from an external hard drive or flash drive, and you want to actually move files rather than copy them, you can hold down the option key to force it to do a "move" rather than a "copy." This is not new behavior, though... the Mac OS has worked this way as long as I can recall (and I've been using it since 1984).
If you're having a problem with trying to move files from one place to another on a single drive causing them to be copied instead, that is likely because of some permissions issue preventing you from actually being able to move them.

HT5621 I have moved permanently from the US to live in the UK. when I try to download a UK app I am often told that I cannot use a UK Apple sstore, only a US store. I need to access various UK stores how can I deal with this?

I have moved permanently from the US to live in the UK. when I try to download a UK app I am often told that I cannot use a UK Apple sstore, only a US store. I need to access various UK stores how can I deal with this?

Try here
http://support.apple.com/kb/HT1311
when you have UK Cards etc best to change as well

How can I script moving paths from one file to another?

Hello. I have 1 image with various color correction layers. The other is the exact same size but only contains paths. How can I script moving paths from one file to another? Thanks, in advance, for any help you can offer. Thanks!

Thanks! This one actually worked for me. Thanks for your help.
http://forums.adobe.com/message/3305389#3305389

How can I preserve the date and time of photos when moving them from iPhone to iPhoto and then to other folders on my computer?

In the past I’ve had no problem moving photos from my iPhone 4 into various folders on my computer while retaining their original date and time. I would import into iPhoto, then drag the photos from iPhoto into other folders via the Finder or Adobe Bridge (which is my principal image organizer). The original date and time of the photo would always travel with the jpeg into iPhoto and then into other folders. However, sometime during a recent session transferring photos in this way, the dates of the photos started to change at the point when I copied them out of iPhoto. Within iPhoto itself, the various original dates of the photos are retained. But in Finder and Bridge, copies of those same photos all carry the same (worthless) date: the date and time that they were imported from my iPhone. I can’t figure out what would have changed on my Mac to make it start re-dating my photos. I was happily dragging and dropping photos, and suddently I started to lose the original dates. Did I inadvertently change some settings? (I am running OS 10.6.8 and using iPhoto 8.)

(I use iPhoto only to import from my iPhone; I organize all my images, including thousands of RAW files, in folders on a big external drive.)
Why are you using iPhoto at all? use image capture or drag and drop the photos
The problem is that the files I am copying are getting stripped of the EXIF metadata
eliminating iPhoto from your work flow will eliminate one oppertunity to have this happen For photos in iPhoto it is best to export them rather than drag an drop them - this assures your EXIF and IPTC data is correct and uptodate
Why would I be able, over many years, to retain EXIF metadata in photos imported from an iPhone--then one day find that the same workflow strips such photos of EXIF data?
Because exporting is the supported way to "export" photos - I never drag and drop photos out of iPhoto and I never use thrid party programs on the photos in the iPhoto library - try exporting as suggested above and see if that is the solution
LN

Process of moving TR from Quality to Production

Dear Experts,
we are in a process of moving TR from Quality to Production. While moving we faced transport incositencies like some old requests have been overwritten into the new one and dependant objects were failed during import in PRD. Now production rehearsal client is kind of messed up. what is the right procedure to transport the requests from Quality to Production. (actually we transferred the TR individually based on the list send by the respectivr module owners). Please help me to findout the solution for this issue.
regards,
Yasin.

Hi,
This situation comes every now & then when you don't have any client strategy define in your landscape I'm not blaming you but for your Project Manager and then rest of the team adopt SAP standard practice if you really want things to go well act NOW..!! here is the basic to start:
Ex,
DEV ::
100 => Golden Client
200 => Customizing Client
300 => Test Client
Things to check before importing request in QAS :
1) Always get the request in sequence format ask the owner of the request for the sequence to avoid dependency issues
2) Technical Specification doc - this doc will be prepare by Functional / Developer on what changes are included in TR
QAS::
400 => Quality Client
Things to check before importing request in PRD :
1) User acceptance doc i.e UAT - client / customer will check the functionality if it's on then move this to PRD
2) Get the request in sequence format
3) Approval for production transport
PRD::
500 => Production Client
Thanks,
Saleem

Issue in moving files from data fodler to processed folder in background

Hi All,
I am facing one issue in moving files from data fodler to processed folder in case of background execution.
When i am executing the file in the foreground, i can move the file from Data folder to processed folder. I am using SXPG_COMMAND_EXECUTE FM to move the file from data folder to processed folder. I can see the file in processed folder once the program is executed.
But in case of executing the same program in background, it is giving me the error "Failed to move the file to processed folder" in the spool of SM37 and i can see the file still laying in data folder.
I tried to check other programs which acesses the same folder as the above program, whether they are able to move. They are able to move the file to processed fodler successfully both in foreground and background mode.
Please help me in resolving this issue.
Thanks,
Deepa

Hi Sanu,
Please use teh following code to move the file from source to target folder.
This is a code showing how to create and use COPY command of UNIX in ABAP
PARAMETERS:
Input file path
p_input TYPE localfile,
Processed file path
p_proc TYPE localfile.
Declare the Types to file data
TYPES: BEGIN OF L_X_OUTPUT,
sys(200), " Please note, there are asterisk before and after sys (i.e.sys)
END OF L_X_OUTPUT.
* Internal table to store file data
DATA l_i_output TYPE STANDARD TABLE OF l_x_output WITH HEADER LINE.
* Variable for the UNIX command
DATA: l_v_unix_comm(255) TYPE c.
Copy command of UNIX
CONCATENATE 'mv' p_input p_proc
INTO l_v_unix_comm SEPARATED BY space.
For example the Copy command is stored as below
cp u2018/data/interfaces/input/input_fileu2019 u2018/data/interfaces/processed/processed_fileu2019
Examples of UNIX Command *u2022 mv filename1 filename2 --- moves a file (i.e. gives it a different name, or moves it into a *different directory (see below) *u2022 cp filename1 filename2 --- copies a file
Execute the UNIX Copy command.
This command will copy the file from input file path to the processed file path
CALL 'SYSTEM' ID 'COMMAND' FIELD l_v_unix_comm
ID 'TAB'
FIELD l_i_output-sys.
IF sy-subrc eq 0.
write: 'File is copied successfully using UNIX command in ABAP'.
ENDIF.

Moving Essentials from Virtual to Physical

Similar Messages

Maybe you are looking for