Moving existing EP6 SP2 Projects in to JDI

Is there any tool or option available in Netweaver developer studio to move existing EP6SP2 Projects in to a Development component of JDI?.
Thanks in advance.

Have any body tried moving existing Portal Java iView Projects in to JDI?.. Please share your experience.

Similar Messages

Moving existing PAR Project in to JDI

Have anyone tried moving existing java iView projects in to Java Development Infrastructure of NW 04?. Is there any document that gives details about this?.

Thanks. It works. However i have two more questions.
1) I have a project that has xyz libraries in build path of portal project. How can we have these libraries in the migrated project in DTR automatically?.
I have already tried importing the par file. However the project gives lot of compilation error about missing libaries in build path. I tried adding those libraies maunally but those entries got deleted when i build the project.
2) I have posted this problem in another forum. i got an error "Used component not found: sap.com/tc/bi/bp/portalapplication" when i tried to build a simple "Hello World" project. Are we missing something in the development track configuration?.

Enhancements made in EP6 SP2 patches 28 & 29.

What are the enhancements made in EP6 SP2 patches 28 & 29.
What I mean to say is that what are the new features added in Patches 28 & 29. here I exclude Bug fixes.
I can go to the central note for patch 28 : 793582 and can get a list of notes which indicate bug fixes done in Patch 28
Similar way, I can go to the central note for patch 29 : 803871 and can get a list of notes which indicate bug fixes done in Patch 29
What I am really concerned is regarding new features added in these two patches (Patch 28 & 29) separately.
Are there any new features added in these two Patch releases. If yes, Where are they documented.
Are they documented separately or their respective guides are updated.
Your help is really appreciated.

Hi Robert, hi Suneel,
> Patch 28 & 29 are not listed there yet.
Not quite right, Robert, I don't know what a dreadfully old version you have looked on... It is listed, but it is explicitely said that both patches, 28 & 29, have
"no new features or enhancements to existing functionality. It is cumulative as of Patch 5. Please refer to Patch 5 and Patch 27 documentation for information about previous enhancements."
The document is retrievable without access to service.sap.com: http://help.sap.com/download/documentation/netweaver/ep/FeaturesEP6SP2Patches_v2.5.pdf
It's a pity that SAP publishes the version name within the link, so if a new version exists, one has to know (or to look via service.sap.com).
Hope it helps
Detlev
PS: Suneel, please consider rewarding points for people like Robert Thanks in advance

EP6 SP2 Metaframe XP

We are currently experiencing Mayor problems on our Metaframe servers. When users access the Portal the portal loads up correcly. But as soon as they navigate within the portal it just refreshes the page it started up with.
Are there any browser settings that we should apply? We are running EP6 SP2.
Metaframe is runnning Windows 2000 Server, browser version IE 6.0.2800.1106
Regards
Richard

HI, There.
Yes this problem has always been there since we moved to the metaframe environment.
However if we make any setting change on IE it works but as soon as you log off and log on again the same problem occurs. The portal works fine on all the other environment except the Metaframe XP environment.
Regards
Richard

CM & KM installation on EP6 SP2

Hi.. im currently installing the CM & KM collaboration into my EP6 SP2.
But the process is hang at the last step.. (post processing)
the sapinst say : return code 0 for test_localhost_500004
The j2ee engine is running, and i have check the 500004 log file.. inside the condition of the localhost_50004 is true .
But my installation it's not moving anywhere

You might be better off logging a support message to SAP.
Thanks,
Karsten

Is AutoClassification for Taxonomies in EP6 SP2 fully functional?

Hello Again,
I've implemented a query-based taxonomy in EP6 with auto classification. I've created 11 taxonomies in total all under 1 index. But the functionality seems to be inconsistent and/or non-functional.
After creating the index I follow this process to create each Taxonomy:
1) (Index Admin) New Taxonomy. (query-based w/ autoclassification)
2) (taxonomy explorer) Add sub-folders to the taxonomy (new folder)
3) (Tax Query Builder) Define the queries for each folder
4) (Tax Query Builder) Click Update
5) (Index Admin) ReIndex the Index or Data Source
When I do one test taxonomy with one subfolder things normally work as planned, the couple of test files get assigned to the test folders. But when I try to do the full implementation of 11 taxonomies, 40 total folders, and roughly 1000 documents to classify. None of the files autoclassify. All the files can be seen in the Index, but during the classification process I get many of these errors: [ Indexing document failed. taxonomy not found (Errorcode 2422) ]
1)Is there another step that I'm missing?
2)What does Taxonomy Syncronization do?
3)What does the datasource incremental update do?
4)Are there any known bugs in EP6 SP2 taxonomies?
Thanks, DAN

Update:
After lots of trial and error in this area I've finally found a suitable sequence of events.
OLD WAY (Didn't work) :
1) (Index Admin) New Taxonomy. (query-based w/ autoclassification)
2) (taxonomy explorer) Add sub-folders to the taxonomy (new folder)
3) (Tax Query Builder) Define the queries for each folder
4) (Tax Query Builder) Click Update
5) (Index Admin) ReIndex the Index or Data Source
NEW WAY: (Reindex moved to step 3, Save & Update queries afer any document update)
1) (Index Admin) New Taxonomy. (query-based w/ autoclassification)
2) (taxonomy explorer) Add sub-folders to the taxonomy (new folder)
3) (Index Admin) ReIndex the Index at the root index level
4) (Tax Query Builder) Define the queries for each folder
5) (Tax Query Builder) Click update for each taxonomy when complete
6) (Inbox) verify that documents classified correctly
If new KM documents or folders are added
1) (Index Admin - Data Source) Incrementally update the datasource at the datasource level
2) (Tax Query Builder) Touch the Taxonomy by selecting 1 query per each Taxonomy and clicking save
3) (Tax Query Builder) Click update for each taxonomy - monitor the app log to make sure the update completes before running the next.
Notes:
*Don't upload KM files with the same name to same dir.
*Be very careful removing/changing KM folder names.
*Changes to the files removes the classification.
FYI: I still find the implementation of taxonomies in EP6 SP2 beta, but with enough trial and error suitable work-around's can be found.

Integration between SAP EP6 SP2 and Documentum WebTop Application

Hi all,
We are try to integrate de WebTop Application with the EP6 SP2 using SSO Ticket or using the User/Passward actually logged on EP6, but do not using the User Mapping
Somebody have this experience?
Thanks in advance.
Talis Treichel

Hi Talis Treichel,
Have you found any solution to solve this? I am having a similar scenario in my project and I am using App Integrator for integrating Documentum Webtop
via user id pwd mapping.
But it is giving me an error saying java.lang.null pointer exception.
I guess the parameters its not taking.
Here are some details:
Main Page: http://<server>:<port>/webtop/component/main?Reload=1137919145246&_dmfFrameId=Login_dialog
This page contains user id and pwd.
The view source of this page contains the below information:
<form name=Login_0 action=/webtop/sdk/system/login/login.jsp method=post>
<input type=text name=Login_username_0 id=LoginUsername> <input type=password name=Login_password_0 id=LoginPassword>
Based on the above info I gave the following:
URL Template: <System.protocol>://<System.server>:<System.port><System.uri>?<Authentication>
URL template fraction for user mapping: Login_username_0=<MappedUser>&Login_password_0=<MappedPassword>
Authentication method: POST
Please help how can we solve the null pointer exception problem
Regards
Umamahesh

Error MSB4057: The target "PlatformPrepareForBuild" does not exist in the project._

Hi to all,
I tried to compile my .sln with VS2010 but I had this error.
error MSB4057: The target "PlatformPrepareForBuild" does not exist in the project.
It occurs only compiling with win32 configuration but not with x64 one.
Ideas?
Thank you in advanced

In which version of Visual Studio did you create this solution? And What type of the project in this solution? And could you please post the proj file here?
If this solution is created in VS2012 or VS2013, please make sure the original solution is not corrupt, it can be opened and built successfully in the corresponding Visual Studio. For probable compatibility issues, you could check the documents here:
Visual Studio 2012 Compatibility
Visual Studio 2013 Compatibility
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Hi, After I try to load either an existing or new project in Adobe Premier Elements 9 I just get a blank grey screen with none of the timeline, etc. boxes on view. This has suddenly happened, one day OK next not! At the top of the screen I get the normal

Hi, After I try to load either an existing or new project in Adobe Premier Elements 9 I just get a blank grey screen with none of the timeline, etc. boxes on view. This has suddenly happened, one day OK next not! At the top of the screen I get the normal Pre icon, File, Edit, Clip, etc.
I am planning on purchasing Premier Elements 13, would it be better if I bought a new program rather than download an upgrade, just in case the upgrade doesn't load properly due to the error with my existing program?
If I the deleted Premier Elements 9 on my PC would I lose all my existing videos that were produced using Premier Elements 9 or would they be saved so that they can still be worked on in Premier Elements 13?
Does Premier Elements 13 work with Windows 7?
Thanks
Terry

Premiere Elements 13 absolutely works with Windows 7!
In fact, I'd highly recommend you download the free trial and give it a test run.
Meantime, go to Windows Update and make sure you have all of the latest Windows updates, including those that don't install automatically. Then go to the nVidia or ATI site and ensure you have the latest driver for your graphics card, and go to Apple.com and ensure you have the latest version of Quicktime, per the program's requirements.

File 'Form1.resx' already exists in the project

Dear Everyone,
Could you help me to solve the File 'Form1.resx' already exists in the project. when I put my form under a sub folder?
I tried to copy the 'Form1.resx' from project base folder to the sub folder, the Visual studio 2010 C++ complied but the software hang at:
this->Icon = (cli::safe_cast<System::Drawing::Icon^ >(resources->GetObject(L"$this.Icon")));
I am using Visual studio C++ 2010.
Here is an explanation from someone with the same issue:
"if you create a new Windows Form in a C++/CLI application and choose to save the .h and .cpp files in a location other than the project folder - for example a sub folder below the sub folder - the form gets created ok, but when you try to change
anything on it you get an error message saying:
"Could not find the file: <path_to_project_folder>\<subfolder>\<form_name>.resx"
If you try to save the changes you get another error message saying:
"File <path_to_project_folder>\<form_name>.resx' already exists in the project."
followed by another error message:
"Error HRESULT E_FAIL has been returned from a call to a COM component."
Regardless of where you save the .h file, Visual studio creates the .resx file in the project folder and then looks for it in the same folder as the .h file, and can't find it!"

Hi Shu Hu,
I followed you suggestion and the issue was still there. I got the software crashed at:
this->Icon = (cli::safe_cast<System::Drawing::Icon^ >(resources->GetObject(L"$this.Icon")));
Here are my steps:
1. Create a subdirectory
2. Add new form under new sub-directory
3. Change form icon from "Properties" tab
4. ignore error
5. copy the *.resx from the root of the project to sub-directory
6. close and reopen the project
7. remove *.resx from project Solution
8. Add *.resx under sub-directory to Header Files
9. Add some code to call the form.
10. Build & run
I saw this issue reported at least since VS C++ 2005 and it seemed there is no fix.
I tried these steps to reproduce this issue. But my project works well on my side. According to your application hang at : "this->Icon = (cli::safe_cast<System::Drawing::Icon^ >(resources->GetObject(L"$this.Icon")));"
I guess you may forget one step, could you try open the .resx file and click add resource -> add existing file. I guess your icon file didn't embed in resx file.
How to report this issue to Microsoft development team so they can fix it?
I cannot reproduce this issue. If you have a sample to reproduce this issue, you could submit this issue to
microsoft connect. I am also glad to test your sample on my side, and you could share it on a public Onedrive folder with me.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Target 'install' does not exist in this project ",this is the error i get..

i get this error when i try to install ,with the command : ant install,
a webservice on tomcat, and when i type
ant install it gives me this error:
" Target 'install' does not exist in this project "
i have a file in the same directory with the build.xml named install.xml
and when i type ant build there is no error but by tiping ant install the error above occurs!

ant install will execute the target install. As you did not define the build file, the standard one is taken: build.xml.
These options could be of interest for you:
-buildfile <file>      use given buildfile
    -file    <file>              ''
    -f       <file>              ''

Target 'install' does not exist in this project (TOmcat)

i get this error when i try to install a webservice on tomcat, and when i type
ant install it gives me this error:
" Target 'install' does not exist in this project "
i have a file in the same directory with the build.xml named install.xml
and when i type ant build there is no error but by tiping ant install the error above occurs!
Message was edited by:
TheBeginner_77

ant install will execute the target install. As you did not define the build file, the standard one is taken: build.xml.
These options could be of interest for you:
-buildfile <file>      use given buildfile
    -file    <file>              ''
    -f       <file>              ''

Default Target Main Build does not exist in this project

I am learning ant with eclipse and wanted to use ant build.xml to compile and run my class. I was getting the following error when i just tried to use ant.
Default Target Main Build does not exist in this project
package src;
public class Ch05_02 {
public static void main(String[] args) {
System.out.println("This code was built using Ant.");
<?xml version="1.0" encoding = "UTF-8"?>
<project name="Ch05_02" default="Main Build" basedir=".">
</project>Ref: http://www.javabeginner.com/Ch05_02.zip
Edited by: hemanthjava on Oct 28, 2007 5:43 AM

You gave a default target in the build.xml, and then didn't define the target.
This is an Ant question. You're better off asking Ant questions on an Ant forum.

Error target 'sda.icssb2b' does not exist in this project

Hello sir,
I want to build ear(Application Archive) by buildtool and ant-current-bin for Modified
SAP Internet Sales Web Applications but i have war file and sda file ,i build form ISA_BuildTool_10 guidline document , build failed because Target 'sda.icssb2b' does not exist in this project.
I think 'sda.icssb2b' was generated by earbuilder.xml
please help me
thanks you
Soothiluck Y.

You gave a default target in the build.xml, and then didn't define the target.
This is an Ant question. You're better off asking Ant questions on an Ant forum.

License in Failover/Backup Portal - Ep6 SP2

Hello,
We run EP6 SP2 and we copy the database and portal server file system to different hardware as a diaster recovery method. We we bring up the portal on this new server it loads fine, but it says that it is not licensed since the Hardware key is different.
Does anyone know if I can import a license on the current server with the hardware key of the DR Server so that it will be licensed when you start it?
Any ideas / suggestions?
Thanks,
Keith

Keith,
Kindly check note 181543 (License key for high-availability environment).
Regards,
James

Moving existing EP6 SP2 Projects in to JDI

Similar Messages

Maybe you are looking for