Moving files by dragging

Hi,
I am having trouble moving files, whether it be into trash or into an existing folder. The only way it lets me is by copy and paste, however my sister has the same Mac air and can drag her files without any problems. Can I change this issue in my settings?
Thank you

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

Moving files via drag & drop

Hello all,
I am curious, when I move a file,from say finder, does the system make another copy of the file or another reference to the file?

When you drag and drop a file from one location to another on the same volume the file is "moved." If you drag and drop a file from one volume to another volume then the file is "copied."
Moving a file is essentially the same as: a. copy file to destination; b. delete file from source. Copying a file does not delete the source file. In no circumstance does this process involve aliases.

Moving files by drag and drop

Am I missing a trick in Finder? I have it set to the "three panels" where sub folders are displayed. If I have file in Panel A (leftmost) and I want to drag and drop it into a sub-folder or a folder in Panel A, how do I do it ?!! I can see the sub-folders in Panel B when I click on the main folder in Panel A, but as soon as I click on the stray file in Panel A, all the sub-folders in Panel B go disappear (as I am no longer clicked on the main folder).
What I currently tend to do is drag the file to the desktop and then re-drag it to the sub-folder once I get it to re-display. Sometimes, I'll also try and hold the file while precariously trying to navigate towards the relevant subfolder, but only in times of madness. Either way it seems a very inconvenient making straight forward file movements, and I am wondering if I have something set wrong?

Your best bet is to open a Window to Panel A & another Window to Panel B, or get a Desktop/Finder replacement APP.

When moving a file using drag and drop, as I hover over the destination folder it no longer opens, so I can't drop the file into the folder. Why?

When moving a file using drag and drop, as I hover over the destination folder it no longer opens, so I can't drop the file into the folder. Why? I have a heirarchical embedded folder structure under \Documents. Usually, as I drag the file to be moved over the various folders, they will blink twice, then expand/open to reveal contents (in Finder). Now, when the file to be moved is held (hovering) over the destination folder, it will not blink or expand, so there's no place to drop the file. If I release the mouse button, the file image disappears, showing that it is "going back to the place it came from", a.k.a. was not moved. This just started happening. I noticed it after upgrading to Mavericks. Is this a bug or could anything else be causing this?

As of today, Apple Support discovered during a remote support session with me that the same thing happens on their own system. It is isolated to "Column View"; the Icon and List views in Finder behave correctly. Issue is being escalated to engineering, and Apple will call to report status in a couple days. In all likelihood, this is a bug that will need to be addressed in a future update.

I am having a problem moving files from a iMac in location mac in another location. I have tried using Dropbox and the Public folder in the i disc. When I drag the files into dropbox they become alias' and I can't open them at the other end beca

I am having a problem moving files from an imac in one location to an imac inanother location. I have tried using Dropbox which is installed in both locations but when i drad a file ino yhe app it becomes an alias. When I get to the other location it says I can't open the file because the " original application that created it is not present". This is despite the fact that the app that created both files is installed in both computers. If I use the Public folder in the idisc, when I get to the other location the file isn't there. Am I forgetting to turn something on or off? Should I manually sync the Public folder and if so how? Thanks
Message was edited by: stephenfromdelray beach

So now that's two of us. Hopefully, someone has an answer.

New External Drive connected to Time Capsule moving files problem

I have a late 2009 13" unibody MacBook Pro, that I primarily use for video editing/converting. I use my Time Capsule as a network through which I can connect to my external hard drives via USB for videos and such. I've used at least two other external hard drives along with my Time Capsule for a year and a half with very few problems, aside from the inevitable crash of one. Before yesterday, I had a 1TB Western Digital MyBook (http://www.wdc.com/en/products/products.aspx?id=210) and a 2TB Verbatim Desktop HD (http://www.verbatim.com/prod/hard-drives/desktop/usb-2.0/) connected through my 1TB Time Capsule and aside from the Verbatim drive being rather sluggish most of the time, everything was working fine.
Yesterday, I got a new external drive, an iOmega MiniMax 2TB (http://go.iomega.com/en-us/products/external-hard-drive-desktop/ultramax-minimax /minimax800/?partner=4760). I spent yesterday and most of today moving files around and whatnot through a wired connection (iOmega via firewire 800, Verbatim via USB, MyBook via USB, and Time Capsule via Ethernet), and everything moved quickly and without any problems.
I hooked my Time Capsule up to my modem, plugged in the iOmega and Verbatim drives via USB to the TC, and started my laptop. When I opened the drives, everything was working fine... And then I tried to move a file to the iOmega drive... I was moving an episode of The Killing. I dragged it into the folder and went to Safari to look something up and suddenly realized ten minutes later that I still hadn't heard the noise telling me that the file had finished. I looked at the move dialogue box and it said "156.8 MB of 323.8 MB - About 10 Seconds". I watched it for another ten minutes and it didn't move. So I clicked cancel move and the rainbow wheel of death came up and I had to force reboot my computer.
When I restarted, I opened up finder to access the drives through my Time Capsule, and it "failed to connect" to my Time Capsule. So I went back into my office to flip the switch on the surge protector in order to restart the process. I turned on my computer and I had no problem accessing my hard drives... Until I tried to move an episode of United States of Tara into the iOmega hard drive. This time, it said, "192.5 MB of 202.6 MB - About 5 Seconds" and completely stopped moving again. And the same thing happened when I clicked the little grey "x" to cancel the move.
I repeated the process several more times with no luck. Then I thought it might help to see if it does the same thing with documents. So I dragged just a random document to the iOmega and it took about 30 seconds, but it did it successfully. So I tried to move the episode of The Killing again and I let it go for, like, 25-30 minutes. After this time, I got a notification from finder saying, "Finder cannot complete the operation because some data in "[the file]" can't be read or written. (Error Code -36)". Then when I went back into the "Shared" part of the sidebar to go back into my Time Capsule folder, it said "Connection Failed"
So what exactly does this mean? Are the Time Capsule and iOmega not compatible? Can I only move the files through a wired connection [which would be unfortunate]? Do I need to rejigger the USB configuration? Is the error code just for these two episodes and it's just a random coincidence that it happened the day after I got a new drive?
Thanks for any help anyone can give me!
- Alex

I have attached the macbook to the tc via ethernet cable. Should I turn off my wireless connection or will itunes recognize to go with the faster connection on it's own?
You MBP will try to connect based on the order of the list of network devices on the System Preferences > Network window. If Ethernet is not at the top of the list, then go ahead and temporarily disable AirPort.
After all this is done will the wireless connection be fast enough for normal itunes operation?
For audio streaming it should be, but just be aware that your iTunes host will have to get the audio source wirelessly from the TC, which in turn will have to get the data from the USB hard drive. Finally, the iTunes host will have to wirelessly stream the iTunes audio via AirTunes to the AirPort Express.

Moving files to external drive - need Mac and PC compatibility in future

Hello -
I'm moving a client's video files to an external drive so they have the original files. I'm moving both the DV files (always usable with program that accepts DV files) and the Mac project files in a separate folder (in case they ever work on them in a mac - includes all the referenced files). I know they won't be able to open the latter on a PC but I'd still like to include.
BUT, can they get any external drive? If I plug it into my computer and move files, are they going to run into problems if they use then on a PC? Thinking about getting this one for them (they are paying but want a good price for them):
http://www.buy.com/prod/western-digital-500gb-my-book-essential-usb-2-0-external -hard-drive/q/loc/101/206409667.html
Thanks for your help -
Alexa

Don't have a solution for you, but I did encounter a very similar bug.
I was moving files from one iMac's external drive to another's internal drive, using a drag'n'drop move command on a directory. The move generated an error message, maybe the same as what you saw (I'm not sure), then aborted the move. Only one small file had been moved, and the source directory was gone! Not in the trash. Mac OS X 10.4.8 on both systems, an iMac DV and an iMac 24. The external drive was formatted as "Mac OS Extended (Journaled)."
This sure seems to be a basic programming mistake. So, for me, it's back to doing 3 steps: copy, verify, delete. It's lousy not to be able to rely on proper execution of a basic command, but I've never won an argument with a computer.

Reproducible Bug with Displaying Moved Files

LR 2.0, Windows XP
I have the following folder hierarchy -
A
...B1
...B2
...B3
...B4
...B5
.......C1
.......C2
.......C3
.......C4
I'm seeing the following behavior
1) I select folder B5. Folder B5 does not have directly have images. Only the subordinate folders. (C1 through C4 contains the contents cards from multiple cameras used on a shoot.)
2) In grid display, viewing in sort order, I select the top N images of folder B5 and drag them into B1 or B2. (My goal is to get four DVDs that represent the shoot in time order.)
3) I see the "Moving Photos" and image names in the progress bar in the upper left corner of the screen.
4) After the move is complete, the moved images are still showing, even though the selected folder is still B5. (I say to myself, wait a minute, those images shouldn't be there, I moved them to a different folder.)
5) Right-click / Show in Explorer correctly finds the moved file for one of these images.
6) Hitting E for loupe view began removing the moved images from the grid, but VERY, VERY slowly. (I moved about 200 images, if that is possibly a factor.) It "never" completely refreshed the source grid.
7) However, if I quit out of LR, the folders appear the way I expect them.
8) If I stay in LR, but don't go to Loupe View, I can move around to different folders in my catalog. But when I come back to the original folder I was moving images from that folder (B5 in my example), and it still displays images that are no longer there!
Pretty strange...
- Tom

I have this problem with my mac. My "fix" is to hit "delete" in grid mode then "remove" (not remove from disk) then command Z and the photos will be in your new folder will no longer show in the old folder. Hope they fix this!!!!!!

Moving files and folders in the Library module

I teach a lot of LR users and one area that's consistantly frustrating and unintuitive (even to some experienced users) are the rules for moving files and folders around in the Library module. I'm not sure I have all the right answers/suggestions/remedies but here are the basic points worth examining:
1) Additional hard drives aren't listed unless images from it have been imported into Lightroom. It would be nice if people could add a new hard drive without importing files from it. People don't get it that you can select "Add Folder" from the Folders pop up menu. Classic example: Say someone has purchased a new hard drive for archiving purposes. It's empty and they want to drag folders of images onto it from within LR. Possible Solution: include a "Add Drive..." option from the Folder's panel + pop-up menu that would behave the same and add a root level folder.
2) One can't drag more than one folder at a time. While I assume this is designed to prevent accidental mass movement it would be nice if one could enable the movement of multiple folders.
3) One can't drag a folder onto the main drive bar that lists the drive's name and capacities - one has to drag onto a folder within a drive. I'd love to be able to drag a folder onto the root level of a drive by dropping onto the drive bar (this would be similar to the MacOS finder).
4) Sometimes the root level of a drive isn't apparent. One may need to right click on a folder and select "Show Parent Folder" to show the root level folder which is named after the volume. Showing a root "folder" that has the same name as the drive is also confusing to people since there isn't actually a folder on the hard drive with that name. I completely understand why folders are hidden by default and I'm not sure the remedy is but, again, this isn't intuitive for new users. If #3 worked as described perhaps we could have root level access without the root folder?
Scott Martin
www.on-sight.com

Perhaps I should add that I really like and appreciate a lot of the decisions that have already been implemented into the Library's Folder's tab. Moving files instead of copying them, showing only folders that contain imported images, the ability to show or hide parent folders.... Bravo!

Trouble moving files in lightroom 2.5

I can't seem to resolve a problem with moving files in Lightroom 2.5. While in the program, can not drag and drop images from one folder to another. If drag and drop from IE (Windows Vista), and then go back into Lightroom 2.5, catalog does not update or recognize the move was done. I have to resync the folders every time.
Based on tutorial videos that I've watched, it should be capable of these very basic things. I'm still new to LR and learning but can't seem to get past this. Is this a bug or setup issue? Not sure what I'm missing but it's driving me nuts, would appreciate any help.
Sincerely,
Bob

I can't seem to resolve a problem with moving files in Lightroom 2.5. While in the program, can not drag and drop images from one folder to another. If drag and drop from IE (Windows Vista), and then go back into Lightroom 2.5, catalog does not update or recognize the move was done. I have to resync the folders every time.
When you want to move a photo to another folder in LR, you have to drag the thumbnail, not the rectangle around the thumbnail.
Lightroom does not find the new location of photos moved in Windows. Simply not a feature of the program. Therefore, you are best off to do the move in LR.
Based on tutorial videos that I've watched, it should be capable of these very basic things. I'm still new to LR and learning but can't seem to get past this. Is this a bug or setup issue? Not sure what I'm missing but it's driving me nuts, would appreciate any help
I don't know what tutorials you are watching, but as I said, locating files that have been moved in Windows is not a feature/capability of Lightroom. You have to point Lightroom to the new location of the photo, or better yet, move the photo in LR. Or, even better, don't move photos from one folder to another, instead browse your photos in Lightroom, using keywords, metadata and collections (instead of folders) as your method of organization.

LR4.2 - Error when moving files

I can repeatedly reproduce an error when moving files into folders within LR4.2.
My current folder structure is setup like:
F:\pictures\YEAR\Folder name\Sub folder\
When I'm moving files from "Folder name" to "Sub folder" I will be moving approx 6 - 20 photos at a time when sorting them into sub folders. After a while of moving files, LR will stop allowing you to move files and will show up the O symbol with a line through it. Until you close and re-open LR will it allow you to start moving photos again.
I've had this happen 3 times on me now and is completely reproducible. As above, move a small amount of files from a parent folder into a child folder repeatedly and eventually it will refuse to move any more photos until you restart LR.
Windows 7 x64 SP1 Professional
Intel Core i7 950 3.07Ghz
24Gb DDR3 Ram
Nvidia GTX470 Video Card
Intel 520 Series 240Gb SATA3 SSD
Lightroom 4.2 x64
Catalog recently optimised with no issues ever experienced with the catalog.

Hi,
I experienced the same problem and error message this morning ...and found that the following steps will resolve the error (at least when using LR 3 on a MAC):
(1) Open LR and rename all the files that you are trying to move by hitting the F2 button, (MAC shortcut)
(2) Look for any images that may have a '?' mark next to them and resolve if required. (The '?' indicates a file 'location' conflict within the catalogue, - ie you may have moved the files around outside of LR)
(3) While still within LR ....highlight all the files that need to be moved ....and drag and drop them into your preferred new location in the usiual way.
Hope this helps.
Cheers
Simon

Crash iTunes when moving files in downloads list?

Twice in a row now I've been able to crash iTunes when moving files in the Downloads list (trying to change the priority).
This happened twice when I tried to drag a file up above the list to get the list to scroll. iTunes would thrash the disk for about ten seconds, and then crash with no error.
Is this a known issue?

Just to clarify, this only happened when the view was down near the bottom of the list, and I wanted to move a file up to the top. Moving files around in the list worked fine if I moved the file within the viewable area of the screen.

Strange thing when moving files

Since upgrading to lion have had no problems but today a really strange thing happened when moving a file by drag and drop to a usb stick.
Dragged and dropped the file no problem then dropped the stick to unmount it.
Removed the stick ok, then when looking at the desktop the stick was still there and the file was still over the stick.
The only way i could get rid of these ghost files was to reboot.
It happened everytime i did this
Any idea what maybe happening.
I tried to drag and drop the ghost files in the bin but they would not move

Hi,
this sounds like a customer support case. I am not sure this can be solved on the forum unless some other users have the same problem and know how to work around it. If this is due to a platform bug then the only solution is customer support to get this fixed.
Frank

Bridge CS5 closes when moving files

Bridge CS5 abruptly closes when moving files. It does not matter if I drag and drop or if I cut/copy and paste to different folders -- I get the same behavior either way. When I try to move files, I get a Windows dialogue box saying the program has experienced a problem and will close. After Brdige closes and I open it again, the files have been moved. Still, it is a pain to have the program crash everytime I move a file.
I have a new computer with great specs and lots of memory (see below). I did not have this problem before and only began to experience it recently. The only changes since then are that I downloaded a trial version of Adobe Dreamweaver. I found another instance of this problem in the forums and followed the advice of disabling all scripts, but it did not help. What can I do to move files in Bridge?
Computer: Studio XPS 9100
Processor: Intel Core i7-920 processor(8MB L2 Cache, 2.66GHz)
RAM: 12GB DDR3 SDRAM,1333MHZ, 6x2GB
Video Card: ATI Radeon HD5670 1GB GDDR5
OS: Windows 7 Home Premium, 64bit, English

I have a computer setup very similar to yours, in fact you have one notch higher ram and video card. It should work. I do use drag and drop sometimes, but almost always use right click and "copy to". It will list the last 10 places you have visited so it is easy to click on the folder (or visit it first). More of a hassle if you have to browse.
I had to add "copy to and move to" to the right click function in Vista and Win7. Check on-line and there is an automatic program that inserts it into the registry. It confident instructions are given to do it manually.
Have no idea why it will not work. Can you drag and drop in Win Exp?
Hope this helps.

LR5 stopped moving files between folders

Hi everybody,
I've noticed today that my LR5 stopped moving files between folders, I select files I want to move and drag them over to a new location like I always did before with only difference is now nothing happends, no messages with errors, nothing... I tried to google it and couldn't find anything related to my problem.
I'm using Windows 8 x64. I checked the permissions on all the photo folders and everything seems to be correct. I also run LR under admin rights, so there shouldn't be any OS related issues... in addition, it was working just fine till today.
I hope you can at least point me in right direction to dig more info on the problem with my LR5.
Thx!

Hi everybody,
I've noticed today that my LR5 stopped moving files between folders, I select files I want to move and drag them over to a new location like I always did before with only difference is now nothing happends, no messages with errors, nothing... I tried to google it and couldn't find anything related to my problem.
I'm using Windows 8 x64. I checked the permissions on all the photo folders and everything seems to be correct. I also run LR under admin rights, so there shouldn't be any OS related issues... in addition, it was working just fine till today.
I hope you can at least point me in right direction to dig more info on the problem with my LR5.
Thx!

Moving files by dragging

Similar Messages

Maybe you are looking for