Moving files from PC to a Mac?

I bought my first Mac notebook and would like to transfer my PC stuff to it...I purchased "one-to-one". whats the easiest way to do that?

I would definitely recommend going into the store and having them show you how to do, or if you are more comfortable at home then use the phone option, because if you are trying to figure out how to do something on the computer while using the instant message feature, it is hard to keep switching back and forth while using programs; in addition, you may need to restart your computer and then you lose contact with your agent.

Similar Messages

Moving files from PowerMac G3 to MacBook Pro

I have a new MacBook Pro and am moving files from all my old macs onto it. I found an old beige desktop PowerPC hard drive but don't have a monitor for it. Also, I have ancient 3.5 floppies that I need to read and the old beige computer has a slot for that. So, the question is: How do I get my files off the beige G3 and onto the new computer when the beige PowerPC has NO firewire?

One solution is to find any old crappy monitor and hook it up to the beige G3. Then you can configure it to use Ethernet, and set up a small Ethernet network with your new MacBook Pro. It is a little complicated, but not difficult.
This article helps explain the concepts:
106658- Creating a small Ethernet network
Then this illustrated step-by-step can walk you through it:
Car1sons OS 9 to OS X.3 File Sharing Setup

HT4889 moving files from pc to mac book

Hi have down loaded to set up moving files from pc to mac book pro but keep getting an error message on pc saying error occurred whilst preparing your info for transfer ! i am running visa on pc any help pls thanks

Look at these links.
*How to use your iPod to move your music to a new computer*
http://docs.info.apple.com/article.html?artnum=300173
http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/
 Cheers, Tom

Time capsule for moving files from PC to MAC?

Hello,
Any know if I can use the time capsule to move all my files from my PC to Mac?

I don't see a response to your last question, so I will chime in, as I have the same issue. I just bought a Macbook and have an old PC. I would like to use my Time Capsule to back up my PC and then transfer these files to my Mac. I read another post that said I should be able to do this by going through my PC "My Network Files" then adding my TC's address. However, when I do this is pops up my e-mail address and asks for a password. I put in the one associated with that particular e-mail address, but it won't accept it. When I tried the one I use for my Mac it then says the folder I am trying to access if not available. Any thoughts on how to proceed?

I am having a problem moving files from a iMac in location mac in another location. I have tried using Dropbox and the Public folder in the i disc. When I drag the files into dropbox they become alias' and I can't open them at the other end beca

I am having a problem moving files from an imac in one location to an imac inanother location. I have tried using Dropbox which is installed in both locations but when i drad a file ino yhe app it becomes an alias. When I get to the other location it says I can't open the file because the " original application that created it is not present". This is despite the fact that the app that created both files is installed in both computers. If I use the Public folder in the idisc, when I get to the other location the file isn't there. Am I forgetting to turn something on or off? Should I manually sync the Public folder and if so how? Thanks
Message was edited by: stephenfromdelray beach

So now that's two of us. Hopefully, someone has an answer.

Anyone have experience moving files from an iPad to a Mac?

Dear Folks,
I need a way to transfer files from my iPad to my Mac, to deal with the content (music and videos right now, but probably other types of files in the future) that iTunes doesn't back up. I've come across two programs that supposedly will let me mount an iPad on the Mac desktop and/or allow me to transfer files from it to my Mac. Deggie and dwb also know of several and have kindly mentioned them. So, I'm considering:
IMToo Podworks for Mac (http://www.imtoopodworks.com/pod-works-mac.html)
Air Sharing HD (http://avatron.com/apps/air-sharing-hd/)
Senuti (http://www.fadingred.com/senuti/)
Yamipod (http://www.yamipod.com/main/modules/home/)
iRip (http://thelittleappfactory.com/irip/)
Does anyone reading this have an opinion on (or experience with) how well any of these work?
Free vs fee isn't an issue for me, how well it functions is.
Thanks!
pax / Ctein

I can tell you with certainty that for documents of any kind "GoodReader" is an excellent app. It will let you connect to your mac via wi-fi. It mounts it as an external drive and you can create folders and drag files to the folders.
I haven't tried dragging any movies or music but there wouldn't be anything to stop you from doing so. There is also a file management component to the app that lets you choose an "Open with ... " type of dialog and open a file with pages if it is a .doc file, or GoodReader can open pdf, doc, xls and many other doc types.
Very happy with this .99 cent app. I agree with the other question though. If I rip a dvd, I use handbrake to convert to mp4 and add to my iTunes - then sync as per normal.

Why does the new operating system not delete the moved files from their original location - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it

Why does the new operating system not delete the moved files from their original locations - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it - also, when transferring large amounts of files it becomes a very large problem remembering which files were transferred and which not.

You're going to need to be more specific, as I'm not quite sure I understand what you're talking about.
If you're referring to copying from an external hard drive or flash drive, and you want to actually move files rather than copy them, you can hold down the option key to force it to do a "move" rather than a "copy." This is not new behavior, though... the Mac OS has worked this way as long as I can recall (and I've been using it since 1984).
If you're having a problem with trying to move files from one place to another on a single drive causing them to be copied instead, that is likely because of some permissions issue preventing you from actually being able to move them.

Moving files to external drive - need Mac and PC compatibility in future

Hello -
I'm moving a client's video files to an external drive so they have the original files. I'm moving both the DV files (always usable with program that accepts DV files) and the Mac project files in a separate folder (in case they ever work on them in a mac - includes all the referenced files). I know they won't be able to open the latter on a PC but I'd still like to include.
BUT, can they get any external drive? If I plug it into my computer and move files, are they going to run into problems if they use then on a PC? Thinking about getting this one for them (they are paying but want a good price for them):
http://www.buy.com/prod/western-digital-500gb-my-book-essential-usb-2-0-external -hard-drive/q/loc/101/206409667.html
Thanks for your help -
Alexa

Don't have a solution for you, but I did encounter a very similar bug.
I was moving files from one iMac's external drive to another's internal drive, using a drag'n'drop move command on a directory. The move generated an error message, maybe the same as what you saw (I'm not sure), then aborted the move. Only one small file had been moved, and the source directory was gone! Not in the trash. Mac OS X 10.4.8 on both systems, an iMac DV and an iMac 24. The external drive was formatted as "Mac OS Extended (Journaled)."
This sure seems to be a basic programming mistake. So, for me, it's back to doing 3 steps: copy, verify, delete. It's lousy not to be able to rely on proper execution of a basic command, but I've never won an argument with a computer.

When I download a Numbers file from iCloud to my Mac, it isn't the latest version.

Today I worked on a Numbers file on my iPad 2 from 4:40 pm to 6:30 pm. A few hours later, when I tried to download the file from iCloud to my Mac, none of today's changes appeared. When I looked at it again on the iPad, on the main Numbers page where you choose the file you want, it showed a time of 4:43 pm associated with the file. However, when I opened it, the two hours of work was still there even though the time was off. I tried sending the file as an email and when I opened the email attachment on my Mac, all of today's changes were there. So the new changes are captured when emailing a file but not when downloading it.
It almost seems as if the file hasn't made it off the iPad and into iCloud, but I can't find any information on ways to force that or know if it's been done.

Two possible problems. 
1. BlackBoard never supports the latest version of Firefox, for a few reasons. Some schools don't run the latest version of BlackBoard Vista or Campus Edition. Also, BlackBoard upgrades seem to be tied to the "school year" cycle, the changes they make to improve and update their software seem to be rolled out for the fall term so that changes aren't being made during the normal "school year" and possibly causing problems for the schools. That also may be a function of their contract / payment cycles with the schools that use their programs.
http://www2.blackboard.com/tuneup/viewpage?name=tuneup_browser_tuneup_windows_firefox 
Select the link for the version of WebCT Vista or Campus Edition ''(version info is usually at the bottom of each page, in the footer)'' that your school is using, then see which version of Firefox is compatible.
Depending upon which version of WebCT your school is using, you will have to use Firefox 3.6.x, Firefox 3.5.x, or Firefox 3.0.x when accessing the Blackboard site.
My advice is to install the Firefox Portable version that you need for Blackboard on your computer, and use that installation only for Blackboard. Continue to use 4.0.1 for all other web browsing. 
http://portableapps.com/apps/internet/firefox_portable/localization#legacy
2. Firefox uses a Plugin ( you have Office Plugin for Netscape Navigator installed) to open files that aren't "internet files", like word processing documents. 
I can't help you directly with Office, as I use Open Office, but there should be a preference for that Plugin within your Office preferences or options under something like Internet, to have those files '''Display documents in browser'''. 
Or see this to make sure you have your "file type" set correctly. 
http://support.mozilla.com/en-US/kb/Managing+file+types

Issue in moving files from data fodler to processed folder in background

Hi All,
I am facing one issue in moving files from data fodler to processed folder in case of background execution.
When i am executing the file in the foreground, i can move the file from Data folder to processed folder. I am using SXPG_COMMAND_EXECUTE FM to move the file from data folder to processed folder. I can see the file in processed folder once the program is executed.
But in case of executing the same program in background, it is giving me the error "Failed to move the file to processed folder" in the spool of SM37 and i can see the file still laying in data folder.
I tried to check other programs which acesses the same folder as the above program, whether they are able to move. They are able to move the file to processed fodler successfully both in foreground and background mode.
Please help me in resolving this issue.
Thanks,
Deepa

Hi Sanu,
Please use teh following code to move the file from source to target folder.
This is a code showing how to create and use COPY command of UNIX in ABAP
PARAMETERS:
Input file path
p_input TYPE localfile,
Processed file path
p_proc TYPE localfile.
Declare the Types to file data
TYPES: BEGIN OF L_X_OUTPUT,
sys(200), " Please note, there are asterisk before and after sys (i.e.sys)
END OF L_X_OUTPUT.
* Internal table to store file data
DATA l_i_output TYPE STANDARD TABLE OF l_x_output WITH HEADER LINE.
* Variable for the UNIX command
DATA: l_v_unix_comm(255) TYPE c.
Copy command of UNIX
CONCATENATE 'mv' p_input p_proc
INTO l_v_unix_comm SEPARATED BY space.
For example the Copy command is stored as below
cp u2018/data/interfaces/input/input_fileu2019 u2018/data/interfaces/processed/processed_fileu2019
Examples of UNIX Command *u2022 mv filename1 filename2 --- moves a file (i.e. gives it a different name, or moves it into a *different directory (see below) *u2022 cp filename1 filename2 --- copies a file
Execute the UNIX Copy command.
This command will copy the file from input file path to the processed file path
CALL 'SYSTEM' ID 'COMMAND' FIELD l_v_unix_comm
ID 'TAB'
FIELD l_i_output-sys.
IF sy-subrc eq 0.
write: 'File is copied successfully using UNIX command in ABAP'.
ENDIF.

Moving file from one location to other in shell script

HI All,
I am facing one problem in moving file from one location to another location please help me out.
My code is as below :
mv ${file}.log ${DATA_XXX}/../archive/${file}.log_`date +"%m%d%y%H%M%S"`
mv ${file} ${DATA_XXX}/../archive/'abc'.`date +"%m%d%y%H%M%S"`
where file =test1 and DATA_XXX= "k01/aa/in"
please help me on this
Thanks

Please describe the problem. Perhaps you are missing the / i.e. /${DATA_XXX}

New to mac. While transferring files from old computer to mac I burnt out a brand new flash drive. How do I format a new flash drive so that it will let me transfer stuff from mac to pc or vise versa??

New to mac. While transferring files from old computer to mac I burnt out a brand new flash drive. How do I format a new flash drive so that it will let me transfer stuff from mac to pc or vise versa??

"guess no one can help me. thanks anyway have a great night everyone"
Some of us do find time to sleep.

Migration assistant did not transfer my files from pc to my mac, even though it says it did

When i used the migration assistant to transfer my files from my pc to mac, it seems i could not find any of my files. it said it transferred successfully, but nothing shows up on my mac. I did it twice? what else do i need to do?

You followed this:
http://www.apple.com/support/switch101/

Just transfered M2TS files from PC to new mac, not able to run them in final cut? any ideas?

just transfered M2TS files from PC to new mac, not able to run them in final cut? any ideas?

FCP doesn't like mpeg2 transport streams. You might give ClipWrap a chance to do the conversion. They have a free trial. If it works, the full version is something like $50.
Good luck
x

I am having trouble moving files from iPhoto to a thumb drive. Sometimes I can move 20 photos next time I can only move 2 photos or 0---this is during the same session. I also have trouble downloading photos to the internet. Can someone please help?

I am having trouble moving files from iphoto to a thumb drive. During the same session sometime I can move 10 photos at a time, the next time I can only move one photo and sometime no photos will move. I also have trouble downloading photos to the internet. I was using a MacBook Pro and had no problems like this. I then upgraded to the MacBook Pro with Retina Vision and this is the computer I am having problems with. Can anyone please give me a suggestion in how to fix this problem. THANK YOU.

iPhoto problems should be posted in their forums.
I also have trouble downloading photos to the internet.
Needs clarification. You upload from your computer to the internet & download from a website/internet to your computer. So which are you trying to do? Either way, sounds like a browser issue. You need to post in the forum of whichever browser you are using.

Moving files from PC to a Mac?

Similar Messages

Maybe you are looking for