Moving frames upstream or downstream

I'm typesetting a large book with tables. I want to put many of the tables in separate frames to avoid page breaks. I would prefer to not set them all in separate frames in the interest of time. The problem is that the captions are numbered paragraphs. I have learned that paragraph numbering is done by frame and not by order on the page. As a programmer I understand why, but it's causing major problems for me. If I only need to set the first table in a frame, it is counted last. The only solution I've found is to set every single table in a separate frame and to create them in order. In chapters with lots of tables, this is a major headache. Is there not a way to move a frame upstream or downstream (meaning forcing a frame to be counted before or after another)? Please say there is!
Thanks for your help!
Aaron

You can put your tables inside your main text frames, and still avoid breaking them. Chose the table paragraph, and use Keep Lines Together.

Similar Messages

Sub Modules in IS Oil & Gas, upstream and downstream

Hi Experts,
I would like to know what are the submodules are there in SAP IS Oil & Gas upstream and downstream.
Thanks in advance.
Thanks
Naveen

Hi Naveen,
IS OIL Downstream Submodules are given below.
1) Hydrocarbon Product Management
2) Marketing, Accounting & Pricing
3) Marketing, Contracts and Order Entry
4) Tariffs, Duties, Permits
5) Exchanges
6) Transportation & Distribution
7) Traders & Schedulers Workbench
8) Service Station Retailing
IS Oil Upstream submodules are
1) Remote Logistics Management
2) Production & Revenue accounting
You can log in to help.sap.com and get these informations.
Regards,
Nalini Kanta Das

What is upstream and downstream in an IS Oil?

Hi,
Its a very basic question? Actually i am working for a oil co implementation? Si i cam to the site looking for some clues/ best practices on the oil/ gas implementations.
what is this upstream and downstream in an IS Oil implementation? I have not come across this term earlier in a sap implementation.
Is this specific to oil gas industry? may be my implementation does not have a upstream downstream concept..
please advise.
regards

Hi Rajiv,
Stream is determined by the flow of material.
UpStream :- In Oil and Gas industry initial investment is very high for locating the source for crude oil and then getting the permission for the government of the country where that source lies and then extraction of the oil. a company all along can not bear that expanse so it involves big join ventures ... and in this if you notice then the material (crude oil) is following up .. i.e. from underground source to refineries .. this is called up streams and this covers join venture accounting, and all the finance related stuffs. for more detail on this check out this link
http://help.sap.com/saphelp_oil472/helpdata/en/ec/9d2c3adcc8431be10000000a114084/frameset.htm
Downstream :- This includes the refinement, storage, transportation, measurement and retail of final oil and gas product ......
In existing core R/3 sales and distribution a lot of changes has been done for down stream oil and gas functionality. for more detail in this please check out this link :
http://help.sap.com/saphelp_oil472/helpdata/en/09/c7183619b5a45ee10000009b38f889/frameset.htm.
Thanks.
Regards,
Aditi.

Upstream and Downstream Server Configuration Issues

Hello
We're trying to configure an upstream and downstream server infrastructure. We believe that we have this configured and working properly but our issue is that local clients and servers are appearing on the downstream server and not the upstream server.
It would be useful for all clients to be managed from the upstream server to reduce administration time.
We manually assign computers to groups and use Group Policy to specify the client configuration. The client and server settings have these keys specified:
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate
Name: WUServer    Type: REG_SZ    Data: (Downstream Server)
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate
Name: WUStatusServer    Type: REG_SZ    Data: (Upstream Server)
To me, this should mean that clients only get updates from the downstream server and are conmpletely managed from the upstream server but maybe it doesn't work that way?
All downstream servers are set to replicas.
Can anyone help? I'm sure you shouldn't have to assign every client to group at downstream level. I have thought about using GPO to assign to groups but it would be complicated with our structure due to testing containers and I think I would
have the same result.
Basically, I would like to assign computers to groups from all sites using the upstream server only.
Thanks in advance,
Luke

our issue is that local clients and servers are appearing on the downstream server and not the upstream server.
Number one cause associated with this symptom is not enabling Reporting Rollup on the upstream server in Options->Reporting Rollup.
It would be useful for all clients to be managed from the upstream server to reduce administration time.
This won't happen in any case. Clients are managed from the WSUS server they are assigned to. You can, however, register more than one WSUS server in the WSUS console and manage multiple WSUS servers from a single console.
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate
Name: WUServer    Type: REG_SZ    Data: (Downstream Server)
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate
Name: WUStatusServer    Type: REG_SZ    Data: (Upstream Server)
This is not correct, but it's not a critical issue since "WUServer" is set correctly. The WUA is just ignoring the incorrect value for "WUStatusServer". Both of these strings should be set to the same value -- the assigned WSUS server.
To me, this should mean that clients only get updates from the downstream server and are conmpletely managed from the upstream server but maybe it doesn't work that way?
It doesn't.
Basically, I would like to assign computers to groups from all sites using the upstream server only.
Not an option. You have two choices with replica servers:
Assign the group memberships from the assigned replica server.
Assign the group memberships via Group Policy.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

In Shop Floor Management can I setup a shop dispatch list for upstream and downstream orders for a department or resource? Capacity for a department?

Have a client that requires detailed dispatch information for upstream and downstream lot based jobs in Shop Floor Management module. Also visibility into capacity for a department or resource. Is this possible using only Shop Floor Management
Post here or contact [email protected]

Hi,
I just went through the same problem. Don't know if it is still open.
In customizing under "Project System"->"Structures"->"Operative Structures"->"Network"->"Printing in Networks" you will find entry "Recommendations for printing and print control". There it is stated that the number of time tickets or number of confirmation slips entered for the activity is greater than zero.
Check in transaction OPS0 if you have set the number of prints greater than zero in menu point "List control for transactions (double clic on the entry).

REP-1219 for moved frame

I'm using Report Builder 6.0.8.25.0 to customize a seeded Oracle report which is being run as a concurrent program in Oracle. I've added a field and moved down a frame and it's enclosed fields to make more room. Now I'm getting the dreaded REP-1219 for the frame I moved:
REP-1219: 'M_PERIOD_TOTALS1' has no size -- length or width is zero.
I've gone through the usual efforts to get the error to go away - make sure the frame is fully enclosed by its parent. Delete and recreate. Cut and paste again. But I'm still getting the error.
I've seen the notes and they suggest to make sure the height and width are not zero - frames don't have these properties in the property palette. And this is not a small frame so there's no way the size is getting rounded down to zero. I also see suggestion to convert the report to or from character to or from bitmapped. I'm thinking this is not the solution since all I did was move the frame.
Does anyone have a good way to deal with this error? It seems to pop up fairly often and it usually require a good deal of time to fix it.
RDBMS : 9.2.0.6.0
Oracle Applications : 11.5.9
Servers are Redhat Linux
-Tracy

Tracey,
Sorry this is not working for you.
As I said in my first post, I could not remember if reports 6 can save as a JSP. I went back to an old machine with 6 installed and there is no mention of JSP, the 6 equivalent is a REX file.
By changing the wd and ht of the problem object to > 0 the error will go away and you can resize it properly in the reports builder.
Open your broken report (i.e c:\sales.rdf)
File..Admin..Convert
Source type = rdf
Source = c:\sales.rdf
Dest type = rex
Dest = c:\sales.rex
Click OK
Now open sales.rex and follow my previous post to change the values (I THINK it would be the WD and HT parms of the frame that is causing you trouble.
After your changes are made
Save the sales.rex file
open reports builder
File..Admin..Convert
Source type = rex
Source = c:\sales.rex
Dest type = rdf
Dest = c:\sales_2.rdf
Click OK
Open c:\sales_2.rdf in reports builder
Bob.

Moving frames

Feeling a little Tarantino, I was wondering if it is possible to do the following in Adobe Premiere Elements 10. If I shrink the size of the frame from a specific clip, to about half the size of the window, is there a way to make this smaller frame move from left to right. Then on a second video track I wanted to so the same but make it move in the opposite direction, from right to left, passing underneath the frame moving the other way.
Thanks for your time!

adobenewbie123
Today I tried to turn my interpretation of what you described into a split screen video.. The following is the result that I just uploaded to YouTube
http://youtu.be/JxNkNS_9z1Q
The approach is to define a way to keep the two halves in sync as the Bottom one moves from right to left and the Top one moves from left to right.
It took a lot of consideration getting two videos in the screen so that neither was squashed. It took some cropping and viewing area selection to get something reasonable for me.
Once you have the two halves in place on screen and have Properties Palette/Motion Panel Expanded/Position property opened so that you see the Position values xxxx.x (for right/left or left/right) and to its right xxxx.x (for up down or down up), our focus is going to be on the value to the left, the right/left or left right one.
1. Move the Top half to the right out of the way.
2. Working on the Bottom half, note that the Position values, in this example 360.0, 418.7. That 418.7 is constant for us since you will be working right/left and left right, not up down down up. With the mouse cursor, select and drag the Bottom half to the right to the point where it just disappears off screen. Note the new Position value set. Here it was 1080.0, 418.7. If the 418.7 moved while you were determining the 1080.0 value, just type it back in. Now with the mouse cursor, select and drag the Bottom half to the left to the point where it just disappears off screen. Note the new Position value set. Here it was -360.0, 418.7.
Again, if the 418.7 moved while you were determining the -360.0 value, just type it back in.
3. At this time, move the Timeline Indicator to the start of the Timeline. We want the video to move from right to left so.....
(a) In Motion Panel expanded/Position, type in the set 1080.0, 418.7.
(b) Click on the Toggle Animation icon to initiate the keyframing process.
(c) Move the Timeline Indicator to the end of the Bottom half clip. Type in the Position set -360.0, 418.7.
4. Render the Bottom half. It is done.
5. Move the Top half back in place directly above the Bottom half. Select the Top half and have its Motion Panel expanded open to view the Position values. Here they were 360, 171.9. We want the video to move from left to right so.....
(a) Move the Timeline Indicator to the start of the Top half and, for the Motion Panel expanded/Position set, type in -360.0, 171.9
(b) Click on the Toggle Animation icon to initiate the keyframing process.
(c) Move the Timeline Indicator to the end of the Top half clip. Type in the Position set 1080.0, 171.9.
6. Render. It is done.
Though specific numbers may vary, do you see the scheme in this?
a. each half will have it characteristic up down down up Position value which will stay constant for its half. In this case Top half has 418.7 and Bottom half has 171.9.
b. the Bottom half right left position value is going to be the same as that of the top but just reversed because of the different direction that the videos are going in.
Please check out the above to make sure I have my rights lefts and everything else going in the right direction.
Please let us know the results. Success or back to the drawing board. For the viewer I am not sure of the effectiveness of such an effect, but you may have the key.
ATR
Great precision in the move, but only if that is the effect sought. If not, back to the drawing board.
The YouTube demo had Time Stretch 300% applied to each half to speed up the movement.

Selection tool not moving frames

Hi,
I'm new to InDesign so my problem might be an easy fix. I'm making a large photobook which is now 112 pages long. Everything has been working fine until now. Today when I open the program the selection tool seems to do everything but move a frame. I'm wondering if I have inadvertently disabled this function or whether it is something more serious. If so can I re-install the software to repair the existing version or do I need to uninstall first?

Are you able to select the frame you want to move? You may have inadvertently locked the layer. Also, be sure you are using the regular selction tool (Black arrow) not the Direct Select tool (White Arrow).
If you are using the correct tool, and you are able to select, but not move the object (and it is not locked), check to see if the problem exists in a new file as well. If it happens in new files, replace your preferences: http://forums.adobe.com/thread/526990 If it is isolated to the siingle file, export to .inx: http://forums.adobe.com/thread/526991

Moving frames.....Simple problem.....

Hello all,
I am new to flash and am having a problem which I thought
should be an easy resolution but it is killing me......
I have a movieclip on my stage in frame 10. In the movie clib
there is a button that when pressed opens another movie clip which
hols 2 buttons. It is essentially a menu item that when clicked
opens a subsequent menu with 2 more items. When one of the
subsenquent menu items is clicked, I want to jump to frame 20,
however nothing is happening.
On the "on(release)" of the subsequent button I have the
"gotoandstop("scene 1", 20 " coded....... can anyone shed some
light why its not jumping there for me.
Thanks in advance
SH

Hello, I assume you have used a line of code similar to this
for your button
on (release) {
gotoAndPlay(20);
this will go to and play frame 20 of the movie clip that your
button is sitting in. What you want the button to do is to
play frame 20 of the main timeline. _root is the keyword
which always refers to the main timeline. So by adjusting your
buttons code you will alow it to communicate with the main
timeline.
on (release) {
_root.gotoAndPlay(20);

Help on moving frames with new Date()

I'm a AS beginer and I need help. I trying to move frames accordind to the hour, for example: at 7 am the at frame 1 and at 8 am at frame 10. I have a code that moves the frames every one hour but I need also to move the by the half hour. For instance: at 7 am frame 1, at 7:30 am frame 5, and at 8 am frame 10. This is the code I have so far that moves ever hour:
// new Date object
myDate = new Date();
myHour = myDate.getHours();
_root.onLoad = function() {
switch (myHour) {
//this start at 7 am and end at 6 am
case 7 :
trace("It's 7:00 AM");
switcher_mc.gotoAndStop(1);
break;
case 8 :
trace("It's 8:00 AM");
switcher_mc.gotoAndStop(3);
break;
case 9 :
trace("It's 9:00 AM");
switcher_mc.gotoAndStop(5);
break;
case 10 :
trace("It's 10:00 AM");
switcher_mc.gotoAndStop(7);
break;
and so on till 6 am. As you see I need some half hours for some frames.
I will appreciate any help.
Thanks in advance
Pao Pao

I'm sorry I don't get what you mean. As you see the frame noves when it get to the "case #" like "case 7" it goes to play when is seven am and case 19 goes to play when is 7 pm. what I want is how to get to 7.5 to go and play at 7:30.

Moving frames on MC with if statment

Anyone want to tell me why this MC allways goes to frame 76 once clicked insted of checking the frame its on here is the code...
function goQuestion(e:Event){
if(e.currentTarget.frame <=(60)){
e.currentTarget.gotoAndPlay(60)
}else{
e.currentTarget.gotoAndPlay(76);

var card1:card001 = new card001();
var card2:card002 = new card002();
var card3:card003 = new card003();
var card4:card004 = new card004();
var card5:card005 = new card005();
var card6:card006 = new card006();
var card7:card007 = new card007();
var card8:card008 = new card008();
var card9:card009 = new card009();
var allImages:Array = new Array();
allImages = [card1, card2, card3, card4, card5, card6, card7];
var newImage = allImages[Math.floor(Math.random() * allImages.length)]
addChild(newImage);
trace (newImage)
newImage.x = 8;
newImage.y = 5;

WSUS patch status information not rolling up from Downstream to Upstream

We have a Windows 2008 R2 WSUS server running WSUS 3.2.7600.274
We have a Downstream replica also Windows 2008 R2 WSUS server running WSUS 3.2.7600.274
At some stage the Patch Needed status stopped rolling up from the downstream to the upstream server. ie the needed/installed/error counts can all be seen on the downstream replica however on the upstream they all show as 0 and the updates with no status
is the total number of patches available.
After days of troubleshooting. We re-installed WSUS on both the upstream and downstream and let the agents report in again and the issue was resolved.
Less that 30 days later the issue has started occurring again. Needed counts are correct on the downstream replica however this is not replicating up to the upstream. New agents that report in show "no status" for all patches, and all agents
show 'no Status" for any new patches.
The downstream server has now been deleted from the upstreams "Downstream Servers" section, forcing all machines to be removed from the Upstream console and then re-sync the downstream again. Now all machines show no status for all patches.
The WSUS instances are at the same version.
The time is within 1 minute of each other on downstream and upstream.
the rollup reporting is enabled on the upstream.
Currently we have the support teams using the downstream for reporting and approving patches on the upstream. Not ideal.

Thanks for the reply Michael,
The SoftwareDistribution.log file on the downstream replica has the below quite regularly:
2015-04-08 21:37:30.215 UTC Warning w3wp.5 SoapUtilities.CreateException ThrowException: actor = http://WSUSDOWNSTREAM:8530/ClientWebService/client.asmx, ID=0c03abf0-abb8-4ca3-ad3b-d61960b7922e, ErrorCode=ConfigChanged, Message=, Client=d2acf1c9-c820-428c-8634-44c2e69272e6
2015-04-08 21:37:48.575 UTC Warning w3wp.6 SoapUtilities.CreateException ThrowException: actor = http://WSUSDOWNSTREAM:8530/ClientWebService/client.asmx, ID=e4110e63-2358-447c-b003-4596b60abee1, ErrorCode=ConfigChanged, Message=, Client=47e558c1-e57e-4948-829c-98eb99727321
2015-04-08 21:37:50.700 UTC Warning w3wp.6 SoapUtilities.CreateException ThrowException: actor = http://WSUSDOWNSTREAM:8530/ClientWebService/client.asmx, ID=434cd484-86dc-468a-a57a-e69cd9e869c2, ErrorCode=ConfigChanged, Message=, Client=6d4c52c5-0252-4260-b07c-15674cee68f3
2015-04-08 21:38:02.934 UTC Warning w3wp.7 SoapUtilities.CreateException ThrowException: actor = http://WSUSDOWNSTREAM:8530/ClientWebService/client.asmx, ID=423780bf-8957-4278-8af1-4520d241c683, ErrorCode=ConfigChanged, Message=, Client=6c3a8800-9261-487b-b79a-421f8d26cead

Patches, Upstream, Downstream Explanation Please

I'm trying to get a grasp on what a Linux distro is and entails behind the scenes. I believe I have a vague and possibly incorrect idea of the terms, patches, upstream and downstream. What else am I leaving out and please explain.
I'll start with the following examples. I have read that Ubuntu is at one end of a scale and Slackware is at the other.
Ubuntu has a heavily patched kernel and packages. Slackware is "virgin?" as in unmodified kernel and packages.
Are all kernel patches for security issues, file system and hardware support prior to getting officially implemented into the new kernel?
Do kernel patches necessitate package patches?
Is the following correct? unpatched = simpler, cleaner, stability, standards compliant -vs- heavily patched = opposite of the proceeding
I really have no idea of what the terms upstream and downstream are and how they apply to the big picture other than a wild guess.
Last edited by jeff story (2010-10-24 20:32:27)

Upstream means the developer, the person(s) who writes the source code. Downstream means the person who maintains the binary package for some distro.
Let's say I'm a dev and I wrote a nifty tool I'd like to share. I work hard to make it work on many OSes: Linux, BSD, OSX, Solaris, maybe even Windows.
You are a maintainer for this app for the Arch Linux distro: you create the package which follows the rules set by the Arch overlords: best practices, our internal standards etc.
jeff story wrote:Do kernel patches necessitate package patches?
Not, maybe in some cases.
jeff story wrote:Is the following correct? unpatched = simpler, cleaner, stability, standards compliant -vs- heavily patched = opposite of the proceeding
Sometimes a patched app / kernel means it's working the way you think it should / on some kind of exotic hardware, while the vanilla version does not.
Last edited by karol (2010-10-24 20:55:11)

Moved house and placed back on ADSL Max. Help plea...

Hi, wondered if I could get some help on this issue please.
I have recently moved home and took the same number with us to the new address (connected to the same exchange). Phone service activated fine with the broadband activating 1 day later. At the previous address I was on ADSL2+ with a fairly decent connection (6800kbps download and 950kbps upload with 50dB attenuation).
Now the broadband has activated at the new address I am currently connected at 5408/448kbps. Stats are as follows:
Upstream
448
Downstream
5408
SNR Margin(Upstream)
17.0
SNR Margin(Downstream)
6.0
Line Attenuation(Upstream)
29.5
Line Attenuation(Downstream)
48.0
Not particularly concerned about the downstream speed at this point (although I'm hoping after the 10 day training period to see some increase as I've lost over 1 meg despite moving just around the corner). The problem is the upload at 448kbps. Given the high upstream SNR margin it would appear that I've been moved from ADSL2+ to ADSL Max. The router also seems to confirm this:
Operational Mode
G.DMT
I am assuming this is some sort of mistake as the move should have been for a like-for-like service. Is there any way I can get put back onto ADSL2+ in order to benefit from the increased upload speed? BT Infinity was supposed to go live at the end of September and still waiting so really want to maximise the most out of the current connection.
Thanks,
Tom
Solved!
Go to Solution.

when the mods read this post they wll post a contact us link
after you complete the email you join a queue of other customers and it can take 3/5 working days for mods to get bak to you either by phone or email
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

AHH! FLOATING AUDIO METER FAILS TO REGISTER EACH FRAME'S LEVEL!

I have a problem regarding the floating audio meter - ie, the small 2 track meter that usually sits next to the tools strip in the standard window setup. For some reason, when I scroll along clips in my timeline (using the left/right arrow keys) it doesnt show the levels of each individual frame, nor does it produce the sound that should be heard from that specific frame. This is a huge problem for me, as I am trying hard to sync up clips to music, and I am now stuck with just guessing where I should cut it based on intuition. Also, along with the floating audio meter, the actual audio mixer doesn't register the levels either when trying to move frame by frame. I must make it clear that when in preview(play) mode, the audio does register and can be seen moving along with the sounds produced, but when i press space(stop) it(the level of audio) simply stays put, and does NOT change from the time that I last stopped playing the sequence.
If I am being to confusing, I am trying to be able to (while moving frame by frame with the arrow keys) see and literally hear each individual frame in efforts to make synchronizing a **** of a lot easier and more practical.
This has never been a problem before, and has just recently burdened me. I have tried restarting the settings/preferences, starting new projects, looking in the manual, etc. No dice. Can someone please help me restore FCP's ability to hear each frames audible material, as well as witness each specific decibel level of the individual frames as I arrow across?

Well...
if you make sure scrubbing is on, that would help.
You can also turn on the waveforms in the timeline tracks.
That should help too.

Moving frames upstream or downstream

Similar Messages

Maybe you are looking for