Moving from PowerBook G4 to iBook G4

I am moving from a PowerBook G4 running OS10.3.9 to an iBook G4 running OS10.5.6. I have transferred files and apps using a Firewire connector by rebooting and holding down "t" on the PowerBook and then dragging and dropping the desired files to the iBook. I had hoped that by moving my browser (Firefox), Mail, and Address Book apps from the PowerBook to the iBook and opening them on the iBook that the bookmarks, addresses, etc. would come with them. This has not been the case, and I've gotten an error msg saying that this version of Mail will not run on the OS10.5.6. Any suggestions on how I might accomplish transferring the addresses and bookmarks? Thx.

Thank you. I tried that, but the Firefox bookmarks did not transfer; neither did the playlist from iTunes. The solution was to go into each app and export the bookmarks and the playlist. Everything else worked as it should.

Similar Messages

  • Moving from kindle app to iBook

    I have purchased many books using the kindle app on the ipad.  Is it possible to move the books that I have purchased through the kindle app to iBook?  If so how do you do it?  If not, why not, because I have purchased the books and it should make no difference what app I use.

    You can't. Most ebooks have digital rights management on them which tie them to the store's own ereaders and apps, so ebooks from Apple can only be read in the iBooks app and ebooks from Amazon on Kindle ereaders and apps.

  • Switching/Moving Data from Powerbook to MacBook

    Hey All,
    I just received a new MacBook, and I need to go about moving my information from one to the other. I have a LaCie external with most of my applications and documents on it, but I'm wondering about moving things like my mail accounts (with its "on my mac" mailboxes), address book contacts, etc.
    Also, if I have programs like MS Word, which I had to supply a code in order to install on my Powerbook, will I need to supply a new code to put it on the MacBook, even if I'm transferring it through my external hardrive from the G4?
    Thanks,
    Drayton

    A Basic Guide for Migrating to Intel-Macs
    If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
    Rosetta supports "software that runs on the PowerPC G3 or G4 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
    Classic Environment, and subsequently any Mac OS 9 or earlier applications
    Screensavers written for the PowerPC
    System Preference add-ons
    All Unsanity Haxies
    Browser and other plug-ins
    Contextual Menu Items
    Applications which specifically require the PowerPC G5
    Kernel extensions
    Java applications with JNI (PowerPC) libraries
    See also What Can Be Translated by Rosetta.
    In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
    If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
    If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
    The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
    Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior (does not work), TechTool Pro (pre-4.5.1 versions do not work), SuperDuper (newest release works), and Drive Genius (untested) may not work properly on Intel-Macs. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries.
    Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
    Additional links that will be helpful to new Intel-Mac users:
    Intel In Macs
    Apple Guide to Universal Applications
    MacInTouch List of Compatible Universal Binaries
    MacInTouch List of Rosetta Compatible Applications
    MacUpdate List of Intel-Compatible Software
    Transferring data with Setup Assistant - Migration Assistant FAQ
    Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode or copying the critical contents to CD and DVD or an external hard drive will work better when moving from PowerPC to Intel Macs.
    Basically the instructions you should follow are:
    1. Backup your data first. This is vitally important in case you make a mistake or there's some other problem.
    2. Connect a Firewire cable between your old Mac and your new Intel Mac.
    3. Startup your old Mac in Target Disk Mode.
    4. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
    4. Copy the following items from your old Mac to the new Mac:
    In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
    In your /Home/Library/ folder:
    /Home/Library/Application Support/AddressBook (copy the whole folder)
    /Home/Library/Application Support/iCal (copy the whole folder)
    Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
    /Home/Library/Keychains (copy the whole folder)
    /Home/Library/Mail (copy the whole folder)
    /Home/Library/Preferences/com.apple.mail.plist (* This is a very important file which contains all email account settings and general mail preferences.)
    /Home/Library/Preferences/ copy any preferences needed for third-party applications
    /Home /Library/iTunes (copy the whole folder)
    /Home /Library/Safari (copy the whole folder)
    If you want cookies:
    /Home/Library/Cookies/Cookies.plist
    /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
    For Entourage users:
    Entourage is in /Home/Documents/Microsoft User Data
    Also in /Home/Library/Preferences/Microsoft
    Credit goes to another forum user for this information.
    If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
    5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
    Written by Kappy with additional contributions from a brody.

  • Migration Assistant from PowerBook 10.3.9 to new MacBook Pro?

    A friend has just bought a new MacBook Pro. His previous Mac is a PowerBook (G4 1.0 GHz 15" FW800 - Aluminium) still running Panther 10.3.9.
    He's asked me to help him migrate his files, settings, apps etc. to the new Mac. I had thought to use Migration Assistant/Setup Assistant to do this, but the manual for the MacBook Pro says:
    +"Before migrating, use Software Update on your other Mac. The other Mac should have one of these versions of Mac OS X software—either Mac OS X v10.4.11 or Mac OS X v10.5.6 (or later)."+
    Does this mean you can't migrate from a Panther Mac to Snow Leopard using Migration Assistant?
    TIA,
    Chris Adams.

    You use Migration Assistant from the new machine. The old machine needs to be started into Target Disk Mode. Both machines need to be first connected via Firewire cable. See the following:
    A Basic Guide for Migrating to Intel-Macs
    The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
    If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
    Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
    Classic Environment, and subsequently any Mac OS 9 or earlier applications
    Screensavers written for the PowerPC
    System Preference add-ons
    All Unsanity Haxies
    Browser and other plug-ins
    Contextual Menu Items
    Applications which specifically require the PowerPC G5
    Kernel extensions
    Java applications with JNI (PowerPC) libraries
    See also What Can Be Translated by Rosetta.
    In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
    If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
    If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
    The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
    Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior 4.1, TechTool Pro 4.6.1, SuperDuper 2.5, and Drive Genius 2.0.2 work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
    Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
    Additional links that will be helpful to new Intel-Mac users:
    Intel In Macs
    Apple Guide to Universal Applications
    MacInTouch List of Compatible Universal Binaries
    MacInTouch List of Rosetta Compatible Applications
    MacUpdate List of Intel-Compatible Software
    Transferring data with Setup Assistant - Migration Assistant FAQ
    Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking
    will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
    If both computers support the use of Firewire then you can use the following instructions:
    1. Repair the hard drive and permissions using Disk Utility.
    2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
    3. Connect a Firewire cable between your old Mac and your new Intel Mac.
    4. Startup your old Mac in Target Disk Mode.
    5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
    If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
    1. Set up a local home network: Creating a small Ethernet Network.
    2. If you have a MacBook Air or Late 2008 MacBook see the following:
    MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- Migration Tips and Tricks;
    MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
    MacBook Air- Migration Tips and Tricks;
    MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
    Copy the following items from your old Mac to the new Mac:
    In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
    In your /Home/Library/ folder:
    /Home/Library/Application Support/AddressBook (copy the whole folder)
    /Home/Library/Application Support/iCal (copy the whole folder)
    Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
    /Home/Library/Keychains (copy the whole folder)
    /Home/Library/Mail (copy the whole folder)
    /Home/Library/Preferences/ (copy the whole folder)
    /Home /Library/Calendars (copy the whole folder)
    /Home /Library/iTunes (copy the whole folder)
    /Home /Library/Safari (copy the whole folder)
    If you want cookies:
    /Home/Library/Cookies/Cookies.plist
    /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
    For Entourage users:
    Entourage is in /Home/Documents/Microsoft User Data
    Also in /Home/Library/Preferences/Microsoft
    Credit goes to Macjack for this information.
    If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
    5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
    Written by Kappy with additional contributions from a brody.
    Revised 1/6/2009

  • Migration from powerbook 10.4.11 to imac 10.6.8

    Migrating from Powerbook G4 10.4.11 (cannot upgrade beyond this release). Migrating to a new iMac 10.6.8. Problem: both computers are on the same wireless network. Start Migration Assistant on iMac then on Powerbook. Select "From another Mac" on iMac and "To another Mac" on Powerbook. Powerbook sees iMac, offers passcode entry field. Enter Passcode from iMac into Powerbook Passcode field. iMac displays "processing information ...". Powerbook does same. After 10seconds Powerbook displays the Passcode entry field again. Enter the same Passcode from the iMac into the Powerbook Passcode entry field. Powerbook displays "searching for other computers ...". iMac displays "processing information ...". After a few minutes, iMac displays dropdown box stating "connection to other Mac failed" (or similar wording) while Powerbook continues "searching for other computers ..." and iMac Migration Assistant main dialog box continues "processing information ...".
    Any help solving this problem will be much appreciated.
    Steve

    Steve your first mistake is attempting to do this wirelessly. If you can get it to start expect the migration to take a week or more. The easiest way is to connect the two together via Firewire with a cable like this which you can find at your local computer store, Radio Shack or of course Amazon. This assumes the Powerbook has Firewire, if it doesn't then create a bootable clone on an external HD. You will use either SuperDuper or Carbon Copy Cloner to create the bootable clone. Then instead of using Migration Assistant use Setup Assistant which you ignored when you turned on the new iMac for the first time, this mean you will need to start over. Please read Setup Assistant tips for detailed instructions beginning at "Second Chance..."
    Finally when you are migrating I would strongly recommend not migrating your Applications because you are moving from a PPC based machine to Intel. You may have apps that don't run on Intel or simply need to be updated to do so. This is your opportunity to update Apps and get current.
    Migration Assistant and Setup Assistant are cousins, similar but different. First is SA is more reliable and second it does not create a second user account.

  • Static interference from powerbook and thru my speakers is driving me crazy

    I am using the powerbook 1.67, an airport express and klipsh speakers for my sound. there is a mexican radio station that is playing at a very low but very annoying level thru the speakers. I have a 2.4 cordless phone on my desk as well as a printer plugged into the AX. I unplugged the phone and it is not coming from there. I restarted the AX as well as the modem and it's still there. The only way it stops is when I unplug the speakers. So the speakers themselves are somehow picking up this interference it looks like. Any suggestions? It's driving me crazy.
    I wrote to the speaker company:
    I am getting terrible radio/static
    interference on my Klipsch computer speakers. I
    have them plugged directly into my MAC laptop and
    have an almost full signal from a mexican radio
    station. I tried unplugging the modem, unplugging
    the printer, moving the speakers, etc. All to no
    avail. It makes it unbearable to use my speakers
    unless turned way up. What can be done??? Thanks -
    They wrote back:
    I am very sorry to hear of your problem. Try
    plugging the speakers into another source other
    than your computer, eg. CD player, MP3 etc. and
    see if the static problem follows the speakers.
    Let me know what you find.
    When replyling to this e-mail please include
    original and all replies.
    Promedia Dept.
    Klipsch Group Inc.
    I wrote back again:
    I plugged the speakers directly into an iPod and the static is not there. But if plug into the Mac laptop right next to it, the radio interference is there. I closed iTunes and it is still there.
    +INTERESTING that there is no radio static from the iPod, but my silver Powerbook G4 sends out the static the second it is plugged in.+
    +*and now the speaker company wrote back again*....+
    Since the static did not follow the speaker to another source at least you now know that the problem is not in the speakers. I would have the sound card in your Mac checked, something seems to be sending out a strong enough magnetic wave to overcome the shielding in the speakers.
    Thank You,
    When replyling to this e-mail please include original and all replies.
    Promedia Dept.
    Klipsch Group Inc.

    That is unfortunate to put up with.
    There might still be some simple cures yet to try.
    The entire house wiring may be one cause picking up the source and is using your devices as final output.
    1. I'd look for a power conditioned master brick to plug your PowerBook, and other devices.
    USP back up power devices can also condition the power lines noise.
    There are all types available as listed:
    http://www.thecablepro.com/cableDetail.php?cID=120&cgID=1
    Each of the 12 outlets is individually filtered and double filtered from every other outlet providing maximum component to component isolation.
    http://www.crutchfield.com/ search 'surge'
    2. The Cables: as mentioned where chokes are already in place on them. Most USB come with them.
    3. The Speakers: Not sure, but they must be the self powered type as well from AC wall outlet. That brand is known for high quality.
    Could foil the inside of cabinets “Faraday Cage” to reduce radio signals.
    4. AC Outlets: Are they 3 prong grounded type?
    Check your fuse box area to see if a ground cable
    (roughly 4-6 gauge) is fastened to plumbing, and should be.
    You can also pick up a ground fault checker that just plugs into outlet to verify correct outlet wiring. A HomeDepot tool about $6.
    5. Lead from PowerBook to speakers:
    If this lead is extra long leading to speakers, it too could gather radio.
    If you have extra cat 5 laying around, convert the ends to make alternate lead. Each pair in the cable is color coded like Blue/Blue Wt. These pairs are twisted to shield out interference together with foil rapped covering. Or get shielded cable.
    In the old days of Amps doing all the power to speakers, some people would have a pile of wire rolled up behind speaker, and it also made a perfect antenna.
    Lamp cords: Make sure these cords are not mixed in with your devices. As in crossing over each other.
    Dimmers: If you have lamps on line dimmers, they can go bad over time and cause interference.
    Then back to circuit panel and cut off each circuit to isolate other sources.
    Hopefully you solve it.

  • Need Help moving from mac to Windows

    I did search the forum, but could not find it, so I thought I will ask.
    I have to move from PowerBook to a Windows XP machine. (I see lots of threads moving from mac to windows but not otherway around).
    How do I move the iTunes music. I want to keep the ratings, don't want to redo the ratings for 1000+ songs.
    If it was previously asked and answered, please point me towards that thread.

    Folks,
    Sorry for the redundant post. I had problem doing this, and was able to make it work. The trick was renaming the file iTunes Library to iTunes Library.itl (with the extension).
    Once I did that, it works well.
    Thanks

  • Can I migrate from PowerBook g4 to a new MacBook Air

    I have a non intel PowerBook g4 Can I migrate from PowerBook g4 to a new MacBook Air

    A Basic Guide for Migrating to Intel-Macs
    The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
    If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate.  Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
    Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
      1. Classic Environment, and subsequently any Mac OS 9 or earlier applications
      2. Screensavers written for the PowerPC System Preference add-ons
      3. All Unsanity Haxies Browser and other plug-ins
      4. Contextual Menu Items
      5. Applications which specifically require the PowerPC G5 Kernel extensions
      6. Java applications with JNI (PowerPC) libraries
    See also What Can Be Translated by Rosetta.
    In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
    If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
    If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
    The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
    Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior, TechTool Pro , SuperDuper , and Drive Genius  work properly on Intel-Macs with Leopard.  The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries.  Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
    Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
    Additional links that will be helpful to new Intel-Mac users:
      1. Intel In Macs
      2. Apple Guide to Universal Applications
      3. MacInTouch List of Compatible Universal Binaries
      4. MacInTouch List of Rosetta Compatible Applications
      5. MacUpdate List of Intel-Compatible Software
      6. Transferring data with Setup Assistant - Migration Assistant FAQ
      7. OS X Lion: How to use Migration Assistant to transfer files from another Mac
    Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs.  The initial section below discusses Target Disk Mode.  It is then followed by a section which discusses networking with Macs that lack Firewire.
    If both computers support the use of Firewire then you can use the following instructions:
      1. Repair the hard drive and permissions using Disk Utility.
      2. Backup your data.  This is vitally important in case you make a mistake
          or there's some other problem.
      3. Connect a Firewire cable between your old Mac and your new Intel Mac.
      4. Startup your old Mac in Transferring files between two computers using FireWire.
      5. Startup your new Mac for the first time, go through the setup and
           registration screens, but do NOT migrate data over. Get to your
           desktop on the new Mac without migrating any new data over.
    If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
    1. Set up a local home network: Creating a small Ethernet Network.
    2. If you have a MacBook Air or Late 2008 MacBook see the following:
      a. MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch,
          Late 2008) - What to do if migration is unsuccessful;
      b. MacBook Air - Migration Tips and Tricks;
      c. MacBook Air - Remote Disc, Migration, or Remote Install Mac OS X and
          wireless 802.11n networks.
    Copy the following items from your old Mac to the new Mac:
    In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
    In your /Home/Library/ folder:
    /Home/Library/Application Support/AddressBook (copy the whole folder) /Home/Library/Application Support/iCal (copy the whole folder)
    Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
    /Home/Library/Keychains (copy the whole folder) /Home/Library/Mail (copy the whole folder) /Home/Library/Preferences/ (copy the whole folder) /Home /Library/Calendars (copy the whole folder) /Home /Library/iTunes (copy the whole folder) /Home /Library/Safari (copy the whole folder)
    If you want cookies:
    /Home/Library/Cookies/Cookies.plist /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
    For Entourage users:
    Entourage is in /Home/Documents/Microsoft User Data Also in /Home/Library/Preferences/Microsoft.
    Credit goes to Macjack for this information.
    If you need to transfer data for other applications please ask the vendor or ask in the  Discussions where specific applications store their data.
    5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
    Written by Kappy with additional contributions from a brody.Revised 5/21/2011

  • Remove copy from server 'when moved from inbox' option for POP accounts

    Is this option supposed to work in all cases? (or could it be buggy?:-)
    I can't get it to work with my POP account: messages are still left on the POP server, even after when they are moved from the inbox to another local mailbox on my Mac...
    Manual selective removal of messages from the server does work (thru the 'Get info' window of the 'Gear' menu at bottom of Mailboxes pane), so this does seem to be a problem with the POP server.
    Or do I by any chance misinterpret the meaning of this option?
    PowerBook G4   Mac OS X (10.4.7)   Mail version 2.1 (752/752.2)

    You've interpreted correctly how it should work, as long as you take the following considerations into account:
    1. Messages aren't supposed to be removed from the server immediately, but rather the next time Mail connects to the POP server.
    2. It may have no effect on messages that had already been downloaded prior to you choosing that option.
    And, yes, it sometimes doesn't work as expected. It could be buggy or Mail might have problems communicating with the server.

  • Big upgrade - moving from 10.4.11 to 10.6.4 AND fro, iPhone 1 to iPhone 4

    I realize I have a unique situation and have been unable to find an answer..
    I'm making a big upgrade in my system - my questions:
    1) What is my best bet for moving my Address Book - currently on PowerBook G4 running 10.4.11 and on iPhone 1 - to my new set up - iMac running 10.6.4 and iPhone 4?
    I would prefer not to launch Rosetta - I've avoided it thus far and am hoping to NOT launch Power PC apps on this new machine.. and so I'm not sure if I should sync the original iPhone in order to move the info or if I should migrate it from the PowerBook to the iMac..?
    Thanks very much guys and gals - hope you all have a nice day.

    Your situation is anything but unique. The easiest method is to use Migration Assistant on your new computer to transfer what should be transferred from your old computer. Both computers support Firewire. You will need a 6-pin to 9-pin Firewire cable that you should be able to find at any local store selling computers - Best Buy, Wal-Mart, Apple Store, etc. Read the following:
    A Basic Guide for Migrating to Intel-Macs
    The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
    If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
    Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
    Classic Environment, and subsequently any Mac OS 9 or earlier applications
    Screensavers written for the PowerPC
    System Preference add-ons
    All Unsanity Haxies
    Browser and other plug-ins
    Contextual Menu Items
    Applications which specifically require the PowerPC G5
    Kernel extensions
    Java applications with JNI (PowerPC) libraries
    See also What Can Be Translated by Rosetta.
    In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
    If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
    If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
    The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
    Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior 4.1, TechTool Pro 4.6.1, SuperDuper 2.5, and Drive Genius 2.0.2 work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
    Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
    Additional links that will be helpful to new Intel-Mac users:
    Intel In Macs
    Apple Guide to Universal Applications
    MacInTouch List of Compatible Universal Binaries
    MacInTouch List of Rosetta Compatible Applications
    MacUpdate List of Intel-Compatible Software
    Transferring data with Setup Assistant - Migration Assistant FAQ
    Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking
    will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
    If both computers support the use of Firewire then you can use the following instructions:
    1. Repair the hard drive and permissions using Disk Utility.
    2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
    3. Connect a Firewire cable between your old Mac and your new Intel Mac.
    4. Startup your old Mac in Target Disk Mode.
    5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
    If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
    1. Set up a local home network: Creating a small Ethernet Network.
    2. If you have a MacBook Air or Late 2008 MacBook see the following:
    MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- Migration Tips and Tricks;
    MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
    MacBook Air- Migration Tips and Tricks;
    MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
    Copy the following items from your old Mac to the new Mac:
    In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
    In your /Home/Library/ folder:
    /Home/Library/Application Support/AddressBook (copy the whole folder)
    /Home/Library/Application Support/iCal (copy the whole folder)
    Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
    /Home/Library/Keychains (copy the whole folder)
    /Home/Library/Mail (copy the whole folder)
    /Home/Library/Preferences/ (copy the whole folder)
    /Home /Library/Calendars (copy the whole folder)
    /Home /Library/iTunes (copy the whole folder)
    /Home /Library/Safari (copy the whole folder)
    If you want cookies:
    /Home/Library/Cookies/Cookies.plist
    /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
    For Entourage users:
    Entourage is in /Home/Documents/Microsoft User Data
    Also in /Home/Library/Preferences/Microsoft
    Credit goes to Macjack for this information.
    If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
    5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
    Written by Kappy with additional contributions from a brody.
    Revised 1/6/2009

  • Form button does not work when a program is moved from Windows 8.2 to Windows 7

    Hi,
    I have a few Excel programs which use the ODBC to get data from Access and which have macros which writes data to an external program, MYOB.
    When the macros tries to write the data to MYOB it fails if I am not running the program in administrator mode.   It seems that Windows 8.2 has a different level of security than Windows 7 and must be run in administrator mode for the ODBC to work. 
    I have had issues after running the program in administrator mode (testing) if I simply do a save (in administrator mode) and then send it to the customer.   The issue is that it just will not work on the customer's site.   I have gotten
    around this in the past by saving any changes, going back out of excel, loading the program again (not in administrator mode) and saving it - before sending it to the customer.   This worked until now.
    For some unknown reason, the last time I sent a program to the customer and carried out the above process, the program stopped working.   Originally I thought that the macro just wouldn't work on windows 7, but eventually found that it is the form button
    that will no longer work when the program is moved from 8.2 to 7.
    Does anyone know why there is an incompatibility between 8.2 and Windows 7 and what I should be doing to ensure that my programs work in my customers environment(windows7)?
    In the meanwhile, I have changed the form button to an activex button and the program works fine in both environments.
    Thanking you in advance,

    there is some OP report after Windows update Dec 2014 macro stop responding ( I cant confirm if this is also related to your issue) its because security update for Office maybe conflict with the active-x that you are installed
    try to
    Close Excel
    Start Windows Explorer.
    Select your system drive (usually C:)
    Use the Search box to search for *.exd
    Delete all the files it finds.
    Start Excel again
    Open that file and save it, and try open at Windows 7
    to get more detail about this issue, I suggest also contact Office forum
    this case also will be solve installing kb3025036
    good luck

  • HT4101 Once pictures are moved from your camera to your iPad (using the camera connection kit), how do you get the photos off of the iPad? They do not show up in my photo stream or my iCloud.

    Once pictures are moved from your camera to your iPad (using the camera connection kit), how do you get the photos off of the iPad? They do not show up in my photo stream or my iCloud. I am able to see any photo I took on the iPad using the iPad camera (in iTunes, photo stream, or when I open windows explorer and browse the iPad director), however I cannot see any photos transfered from my camera to the iPad. The camera connection kit must have put my photos in a directory I cannot get to and cannot sync.

    The links below have instructions for deleting photos.
    iOS and iPod: Syncing photos using iTunes
    http://support.apple.com/kb/HT4236
    iPad Tip: How to Delete Photos from Your iPad in the Photos App
    http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
    Another Way to Quickly Delete Photos from Your iPad (Mac Only)
    http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
    How to Delete Photos from iPad
    http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
    How to: Batch Delete Photos on the iPad
    http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
    (With iOS 5.1, use 2 fingers)
    How to Delete Photos from iCloud’s Photo Stream
    http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
     Cheers, Tom

  • I have the iPhone 5 and have with 6.0.1 software version.  Although I had them when I moved from iPhone 4 to the 5, the latest update has most of my songs on the phone listed in grey (over 95% of them) and I can't play them.  They are still listed though.

    I have the iPhone 5 and have with 6.0.1 software version.  Although I had them when I moved from iPhone 4 to the 5 (could play them), the latest update has most of my songs on the phone listed in grey (over 95% of them) and I can't play them.  They are still listed in the iTunes library.  When I look in the Summary for the iPhone, it shows Audio as only .16 GB - I have over 5 GB of songs, so what gives?
    P.S. When I look at my Playlists most of the songs are greyed out.  However, at the bottom of the list there is a cloud icon with a downward facing arrow.  When I click on it each song starts to "load" and after a few minutes I have the songs back on in the list.  I have to do this to all my playlists (I had over 100) in order to get access to all my songs.  Then I did a sync and it happened again!
    I use iCloud for documents and some other things (calendar, contact, etc.) but am not aware that I have anything music-wise in the cloud.  Any thougnts?

    You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.

  • Mac desktop. 10.6.8. Text edit. Not locked. Read and write. Still, documents are locking when they are moved from desktop to another folder on the server. Techies can't figure it out here. What am I not doing?

    Mac desktop. 10.6.8. Text edit. Not locked. Read and write, not read only. Documents are locking when they are moved from desktop to another folder or saved directly into that folder on the server. Not happening with anyone else but me and the boss's computer so has to be in the properties for my text edit software. Techies can't figure it out after trying for two weeks. Boss can do a cut and paste and put into a new document, but that's starting to become a problem.

    Mac desktop. 10.6.8. Text edit. Not locked. Read and write, not read only. Documents are locking when they are moved from desktop to another folder or saved directly into that folder on the server. Not happening with anyone else but me and the boss's computer so has to be in the properties for my text edit software. Techies can't figure it out after trying for two weeks. Boss can do a cut and paste and put into a new document, but that's starting to become a problem.

  • We just moved from the United States to Costa Rica.  The first two days my mac worked great.  Then all of a sudden I was trying to use a game application and the screen went black and there is a white cursor which I can move around, but I can't escape it

    We just moved from the United States to Costa Rica.  The first two days my mac worked great.  Then all of a sudden I was trying to use a game application and the screen went black and there is a white cursor which I can move around, but I can't escape it. When I restart it seems okay and I see my main screen, but only for a second and then it goes black again. 
    This computer was brand new in June.  Is it the humidity???   What can I do.  Please help!!!!

    No guarantess but try smc and pram resets,

Maybe you are looking for