Moving from PowerMac G5 to Mac Pro, just swap hard drive?

Hey all!
I'm finally upgrading to a Mac Pro from my PowerMac G5. I'm hoping that I'll be able to take the HD out of my PowerMac and install it in the Mac Pro and be able to continue my work with as little downtime as possible.
Can you all confirm or deny that I should be able to do this even though I'm moving from a non-Intel to Intel machine? I'm running 10.5.4 on the PowerMac G5 now.
Thanks!

What I would do:
Install a 3rd drive and format.
Clone your OEM Mac Pro system to the new drive.
Disk Utility Restore is fine, but for keeping it updated, SuperDuper.
Migrate your home account only.
Copy only applications that can be drag-installed.
Install anything that has an installer.
Copy media and data files to 4th drive.
Pull the G5 drive for now. Later, when you know everything is working, reformat it to GPT (GUID partition table) which is default format. While APT is suppose to work, in reality it is best to reformat even if it is a data drive. And having your G5 OS is best wiped clean, though there should be almost zero trouble with Leopard and with applications that are Universal Binary (under Tiger there were problems and migrating would result in sluggish performance, problems and just not running properly, that may still be partially true).
Also, Apple's OEM drives are not the best always in the performance department and moving the system to a new drive helps. For $82 pick up a couple WD Caviar 640GB drives.
Add plenty of memory, check everything out as you move forward, and take precautions up front avoids problems later.
As an experiment, you could try removing the OEM drive and just try running off your G5 drive, as a test, and assuming it is also backed up.

Similar Messages

  • I have a Mac Pro with four hard drives. I currently have Lion installed on one hard drive. I want to have the option to boot from either Lion or Snow Leopard. How can I do this?

    I have a Mac Pro with four hard drives. I currently have Lion installed on one hard drive. I want to have the option to boot from either Lion or Snow Leopard. How can I do this?

    It's best to install Snow Leopard on one of the three remain drives without an Operating System.
    You can then install the applications you need from the original media. Create a User Account using Setup Assistant.
    Do you want to migrate User Accounts from the OSX LIon boot drive, or are you keeping the User Accounts separate?
    Dual-booting just requires holding the option key during startup and selecting either Lion or Snow Leopard.

  • I currently run Mac Pro with three hard drives. Can I dual boot or even triple boot with Snow Leaopard on one drive and Mountain Lion or Lion on others?

    I currently run Mac Pro with three hard drives. Can I dual boot or even triple boot with Snow Leopard on one drive and Mountain Lion or Lion on others?
    I need to keep Snow Leopard so that I can run some old softward.

    If you are careful you can put at least two on one drive, having Recovery from Lion and Mountain Lion on their own drives though.
    CCC can clone Lion Recovery - great for moving or backup.

  • Is it possible to use one of the mac pro's internal hard drives as a external drive that can be accessed by a macbook etc?

    is it possible to use one of the mac pro's internal hard drives as a external drive that can be accessed by a macbook etc?

    Only if you move it to an external enclosure and let them both access it through a file server. 

  • Help!  I transferred the data from my old Macbook pro with some success, but now my new Macbook Air contents think they are the remote disc and that the old Mac Pro is the hard drive.  What did I do and how do I fix it?

    I transferred the data from my old 2006 MacBook Pro 17".  Thanks for the help on that.  I thought that I was doing it right.  Used a backup hard drive and time machine.  Problem:  Now my new macbook air thinks it is the old machine and that the remote disc is the mb air.  Clicks want to take things to mobile me instead of iCloud, old applications launch instead of the new ones.  How do I fix the mess I have made?  Like I said before,  I am a software user and don't really know what I am doing when I start into the guts of the software, but I am able to learn.  Thanks for any help.

    iTunes- How to move the library to an EHD
    After you move the library you need to open iTunes by first depressing the OPTION key then launching iTunes. You will be given a choice of which library to use. This can then be made a permanent change, if you wish, in the Advanced section of iTunes preferences.

  • Why can't my Mac Pro use my hard drive(s)?

    Ok, so I'm using a 2008 mac pro (some specifics are listed at the bottom) and I'm having trouble with my hard drive(s). The hard drive I've been using is full, and sometimes the System Information will show that is full of Audio, Movies, Photos, Apps, Backups or it's just chuck full of "Other."
    But the problem is that my computer stopped using one of my hard drives a while back. It was called "Bay 5." I've opened up the computer to look at the hard drives and I actually have three. Ever since I lost Bay 5, I lost my Adobe Creative Suite and I've gotten a notification that says "The disk you inserted was not readable by this computer." But the drives are the same type as the Macintosh HD, only with 500 GB each. I've clicked "Initialize" on this notification (sorry, I tried to take screen shots but suddenly my computer says "You don't have permission to save files in the location where screen shots are stored") and it pulls up the disc utility and has a drive called "Media," (but only half the time). Bay 5 is not there and neither is the other drive that's there.
    Wow, that screen shot thing is new. Maybe you guys could help me with that problem, too.
    I'm lost. I've looked at 15 min. long youtube videos but none of them have helped. I just want to be able to use those hard drives. I've tried holding the D key at start-up so that the computer can do the Hardware check (or whatever it's called) but it just pulls up a flashing folder with a question mark.
    I'd really appreciate some help.
    Processor:  2 x 2.66 GHz Dual-Core Intel Xeon
    Memory:  4 GB 667 MHz DDR2 FB-DIMM
    Software: Mac OS X Lion 10.7.5 (11G63)

    Buy Carbon Copy Cloner and some new drives. Make sure you have two backup sets and are using TimeMachine as well.
    Reset SMC
    You have a 1,1 2006 model. It is low on memory, which is cheap at $25 2x2GB now on Amazon
    Consider that drives fail and you may have some drives that are more than 4 years old.
    If you want, and have the money, consider investing in Disk Warrior 4.4 or 5.0
    Data Rescue 4 has a demo and would try to find files, would need a recovery drive volume of course also.
    Invest in an SSD for system boot drive, $119 / 250GB, and use a WD Black 1-2TB for data $120, another for TimeMachine.
    Adobe CS needs more memory that you have.
    AHT is not going to help and is on the OEM DVD with 10.4.x that it came with but what you need is boot from another drive or recovery mode and use Disk Utility (and or Disk Warrior). Single User Mode and 'fsck" is also useful as would Safe Boot. But you need a working copy (clone)  backup too.
    I like to have a nice small "Emergency" boot drive with just the minimum for system maintenance, 20GB is fine, some users create a USB flash drive but FireWire or USB2 work well. Or just designate and create a small 20GB volume on any of your other drives.

  • How best to setup a Mac Pro with two hard drives for 1st hard drive or OS failure?

    My first Apple, a Mac Pro,  is to arrive on Monday (1/7).  I will be putting Win7 on Bootcamp and installing Parrallels.  It will have two 1T hard drives.   I would appreciate
    any advice on how best to set it up for best recovery in case of a hard drive or OS crash.   You can tell I have experience with Windows.    It looks like my best choices are
    either disk cloning software or just installing OS X from the recovery disk  on the second drive.   Apple says it is legal to do another installation.   I know the disk cloning will not work on the bootcamp partition which I plan to use for the Parallels program.  Can OS X have an option to boot from two differnet disks and OS installs?
    What I am really wanting to do in the event of a crash,  is to just boot up on the other disk and keep working.     I try to keep data on a separate partition  with backups so
    that a disk or OS crash doesn't cause any data loss.

    I do not use windows.
    However on my Mac Pro for cloning/backups/bootable backups i use Carbon Copy Cloner.
    It has an ability to clone entire disk (unless specified differently) so I can boot from another disk or restore back if I want to.

  • Mac Pro 1,1 Hard drive failure... sorta. Then not.

    I have a MacPro 1,1 Quad core 2.66 processor, with what I believe is the original 250 Gb hard drive. I'm running OSX 10.7.5.
    Today when I powered it on, I could hear the hard drive spooling up (same sound as normal) then I heard 6 clicks and could hear the hard drive spooling down for a few seconds. It then spooled up again, heard 6 more clicks and it spooled down. Finally it attempted once more to spool up which was followed by 1 click and then spooled down with no more tries at booting up. Monitor showed blank grey screen until about the single click which brought up the grey screen with folder symbol with the question mark in it. I pressed the power button which turned it off. I tried powering up several additional times all with the same pattern of clicks and visuals on the monitor.
    I did some research and tried to run the Apple Hardware Test by inserting the second of my original install disks and holding down the D key. Instead of bringing up the Apple Hardware Test, my hard drive managed to boot up completely with no clicks, and now appears to be running fine. I restarted and also did shutdowns... my Mac is booting up completely normally. I took the opportunity to make sure I have a recovery disk and the ability to download and install a new copy of Lion if the need comes up any time soon.
    The main question is... was this likely an indication of a hard drive failure about to happen, as I tend to want to assume, or was the clicking sound and failure to boot a symptom of something else? Booting up while pressing "D" with the second install disk inserted shouldn't have fixed a hard drive problem... I wouldn't think. Also, anyone know the max size a replacement hard drive could be? I'll go with the same kind of hard drive as is currently in it, but not sure on if I'm limited to the original 250 Gb size.

    BTmy1andonly wrote:
    I'm not sure I understand your reference to "clone and backup." I assume it's something else besides a standard backup done with Time Machine?
    The main things to realise…
    Clones are a static copy of an OS or disk.
    Generally they don't have the history of older files (some can).
    OS clones are usually bootable - a really fast solution to 'oh carp my disk died' moments.
    Schedule one to be made as often as you can afford to lose data (e.g once a day, or every other day etc).
    Time Machine is a 'rolling backup'.
    TM copies new files, preens older stuff & then deletes when space is running out.
    It also excludes some inessential system files (like logs) - technically you will not get an identical copy back from a TM restore.
    Archives are for the occasions where you want to store on another media for permanent safekeeping.
    These need to be capable of being read in whatever timeframe you need to store for (a year, a decade…)
    Don't archive with proprietary backup software or proprietary media, otherwise you will have a tough time finding a machine to connect it to it & run the software.
    Several copies on different disks, probably on different media too (e,g. HD + Flash storage + archival DVD's…).
    You may want to revisit archives & duplicate them to new media once in a while depending on how important it is.
    Ideally you would have some offsite copies to protect against fire/ theft etc.
    If you are in business you need to employ all options, if it's just iTunes music & some family photos, you still need to employ 3 types of backup

  • Mac Pro (2006) SSD Hard Drive Upgrade

    I have a Mac Pro from 2006, but it is running a but slow on the hard drive front.  Plus, the drives are now seven years old and I do not want to chance the data failure possiblity.  What is the format I need in order to get two or three new SSD drives which are compatible with my Mac Pro?  Also, do I need to purchase any adapters or converters for the SSD drives to work within the machine?  Finally, how do I copy my current primary drive to the new SSD drive so it could take the place of the current main SATA hard drive in the unit?

    You don't need more than one SSD.
    You can buy WD 10K VelocityRaptors. $100 250GB / $125 500GB / 1TB ?
    Or WD Black 1-2TB for data.
    Memory is important
    How To Install and Remove Memory Mac Prohttps://support.apple.com/kb/HT4433
    2x2GB FBDIMM DDR2 667MHz @ $35http://www.amazon.com/BUFFERED-PC2-5300-FB-DIMM-APPLE-Memory/dp/B002ORUUAC/
    Yes you should replace and upgrade disk drives more like every two years. Yours (and mine) are 6 .5 yrs old now. And huge changes in capacity and performance.
    To use an SSD it depends where you put it. There are 2 SATA ports unused on the logicboard you can access. An IcyDock for older Mac Pro only if you use the drive bays. I run the 2 ports out the back.
    An ATI 5770 is a great upgrade for Lion.
    Using Cloning as a Backup Strategy
    http://www.macupdate.com/app/mac/7032/carbon-copy-cloner 
    http://www.bombich.com/software/updates/ccc-3.5.html
    OS X Lion Install to Different Drive
    How to create an OS X Lion installation disc MacFixIt
    Migration Assistant Update for Mac OS X Snow Leopard
    http://www.apple.com/support/lion/installrecovery/
    Create an OS X Lion Install disc
    http://reviews.cnet.com/8301-13727_7-20080989-263/how-to-create-an-os-x-lion-ins tallation-disc
    How to clone your system:
    http://macperformanceguide.com/Mac-HowToClone-backup.html
    http://macperformanceguide.com/Mac-HowToClone.html
    http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
    http://www.macperformanceguide.com/blog/2012/20120711_2-MacPro-internal-clone-ba ckup.html

  • My Mac Pro had new hard drive installed. I downloaded the latest iPhoto application. All my photos have been restored to a folder which I dragged to the iPhoto icon. The photos are not down loading.

    My Mac Pro had a new hard drive installed. Everything was restored by Carbonite except my photos. Carbonate restored them to a folder and the folder was dragged over the newly installed iPhoto app. The photos are not installing. What next?
    Ron Rushford

    What happens when you try File -> Add to Library?

  • Mid 2010 Mac Pro - Thunderbolt External Hard Drive

    For Christmas my family gave me a 2T Little Big Disk thunderbolt external drive.  I have a mid 2010 Mac Pro which doesn't have a thunderbolt port.  Is there a PCI card I can use to connect the drive to my Mac Pro?

    Those "adapters" are standard HBA. Like ATTO and others.
    eSATA/USB
    CalDigit FASTA-6GU3 2 port USB 3.0 & 2 Port eSATA 6Gb/s host adapter
    PCIe Bus Extender
    Sonnet Express Bus Extender PCIe 2.0
    SAS/SATA
    ATTO ExpressSAS H680 Adapter
    ATTO ExpressSAS H6F0 Adapter
    ATTO ExpressSAS H644 Adapter
    ATTO ExpressSAS R680 RAID Adapter(2)
    Firmtek Seritek/e6G 2 Port eSATA PCI Express (PCIe) Serial ATA Adapter
    Newer Technology MAXPower eSATA 6G PCIe 2.0 Controller Card
    Newer Technology MAXPower RAID mini-SAS 6G-1e1i Controller Card(3)
    Newer Technology MAXPower RAID mini-SAS 6G-2e Controller Card(3)
    Sonnet Tempo SATA 6Gb Pro 2-port
    Sonnet Tempo SATA 6Gb Pro 4-port
    Sonnet 6Gb/s SAS/SATA RAID Controller(2)

  • Migrating Internal Non Boot HD From Old G4 To Mac Pro

    Hey guys,
    I have done a search and haven't been able to find anything to help me with this. I have an extra internal HD in my old G4, it is a non boot drive. Now I want to be able to transfer all the files from it to my new Mac Pro. When I try and connect them via migration assistant, it only mounts my original G4 boot drive on the Mac Pro. Does anyone have any suggestion as to how I can get the etra internal HD to mount?
    Regards,
    Alex
    Mac Pro Dual 2.66 3 GB Ram 1 x 500GB Hitachi HD 1 x 500GB WD HD 30" Display   Mac OS X (10.4.8)   G4 Quicksilver 867 1.12 Ram 80 GB HD 17" Studio Display

    Yes, migration assistant only works with boot drives because it is designed to migrate things like user settings, applications, and so forth. It looks for drives or partitions that contain "blessed" system folders and files, to throw out an old-school Mac term.
    You probably cannot put the G4 drive in your Mac Pro; the Mac Pro's bays are SATA. Your G4 is IDE.
    However, you can boot your G4 in Firewire Target Mode (restart holding down the T key) and then plug the G4 into the Mac Pro via FireWire, and the G4 will mount as a drive on the Mac PRo. From there, you can copy whatever you choose from the old drive.
    You can also remove the G4 drive and place it in an enclosure. I really like the ones Wiebetech.com has - I have a triple interface enclosure that offers USB, FW400, and FW800 connectors.
    BTW, many people have found that using Migration Assisant is troublesome, myself included. After trying it and experiencing less than stellar performance, I wiped the Mac Pro and set it up from scratch. It's just not a good idea to copy between entirely different architectures. I've had fine results going from G4 to G5, but not from G5 to intel-based macs.
    Hope this helps!
    I think that migration assistant only works with boot
    drives. However, there are lots of other ways to
    transfer files. The Mac Pro has 4 hard drive bays, so
    one option could be to put the drive into one of
    those bays... There are external drive enclosures and
    CD burners, as well.

  • HT4889 Just got a new macbook pro. Trying to migrate data from a MacPro to the macBook. MacBook will recognize the Mac Pro but not vice versa. Using Mac OS X 10.6.8 on the Mac Pro(powermac G4. The Mac Pro searches in vain for the MacBook. What should I do

    Just bought a new MacBook Pro. Attempting to migrate data from a power mac G4 running Mac OS X 10.6.8 using a firewire.
    Mac Book will recognize the Mac Pro but the Mac Pro just continues to search for the Mac Book. What should I do?
    Dave VanHorn
    [email protected]

    Put the G4 into Target Disk Mode and open Migration Assistant on the new MBP. Your G4 needs to be running 10.5.8.

  • I tried transferring my iphoto library from my old macbook onto my new macbook pro (via external hard drive), but when i open the new iphoto, it seems to have transferred ALL images ever used on my old macbook. so i tried to just del

    i tried transferring my iphoto library from my old macbook onto my new macbook pro (via external hard drive), but when i open the new iphoto, it seems to have transferred ALL images ever used on my old macbook. so i tried to just delete all those images so i could try a different approach to transferring, but the new iphoto won't let me do anything and every time i try to delete anything it crashes (since the image amount is so high).  please help!!
    MacBook Pro, OS X Mountain Lion (10.8.2), iphoto '11, version 9.4.2

    To move an iPhoto Library to a new machine:
    Link the two Macs together: there are several ways to do this: Wireless Network,Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
    But however you do choose to link the two machines...
    Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
    Then launch iPhoto. That's it.
    This moves photos, events, albums, books, keywords, slideshows and everything else.

  • I just replaced the hard drive on my macbook pro, reformatted new hard drive and copied over a backup from time machine now I have a kernel panic message (you must restart) - what do I do now?

    i just replaced the hard drive on my macbook pro, reformatted new hard drive, installed a back up from time machine and now have kernel panic ( you must restart your computer) what do I need to do?

    If you're able to boot, launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Select the most recent panic log under System Diagnostic Reports. Post the contents – the text, please, not a screenshot. For privacy’s sake, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post "shutdownStall" or "hang" reports.
    If you can't boot in the usual way, try a safe boot. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Safe mode is slower than normal, and some things won’t work at all.

Maybe you are looking for