Moving from PowerMac to Mac Mini

I currently have a PowerMac G5 1.8 Ghz, thinking of upgrading and getting a Mac Mini 2.53 Ghz.
I would get a Mac Pro but they are too expensive, they don't offer a lower cost Mac Pro like they did the G5 when I bought mine. My question is how big of a speed increase would I expect? I know the difference is under 1Ghz in speed plus faster memory and bus etc. but I haven't been able to find a comparison online.
My other question is if my Cinema Display will work out of the box. It's the model before they introduced DisplayPort so I guess it connects via DVI and can use the included adapter?
The other thing I would have to get is a FireWire 800 to 400 adapter to hook to the Cinema Display and my MiniStack. I would consider getting an iMac if I didn't already have a monitor and I can't have a glossy screen.

Jeremy Bohn wrote:
I currently have a PowerMac G5 1.8 Ghz, thinking of upgrading and getting a Mac Mini 2.53 Ghz.
cool
I would get a Mac Pro but they are too expensive, they don't offer a lower cost Mac Pro like they did the G5 when I bought mine.
$2499 isn't very cheap
My question is how big of a speed increase would I expect? I know the difference is under 1Ghz in speed plus faster memory and bus etc. but I haven't been able to find a comparison online.
yes, geekbench numbers! PM G5 (1 core): 1078 & the new Mini 2.53 (2 cores): 3563 which is almost a 3.5x boost in power.
this only test the memory & CPU performance, not the graphics.
http://www.primatelabs.ca/blog
My other question is if my Cinema Display will work out of the box. It's the model before they introduced DisplayPort so I guess it connects via DVI and can use the included adapter?
If DVI, yes & yes!
The other thing I would have to get is a FireWire 800 to 400 adapter to hook to the Cinema Display and my MiniStack. I would consider getting an iMac if I didn't already have a monitor and I can't have a glossy screen.
if your ministack doesn't have an 800 port, yes, the adapters are available from OWC.
Message was edited by: kmac1036

Similar Messages

Moving from Xserve to Mac Mini

I have 2 xserve's running in our environment and I would like to replace them with or at least one of them with a Mac Mini. What will I need to do in order to make this a smooth transition?

Hi JR,
Which Xserve is it and what OS is running on it? If you're running 10.6 for example and want to go to a new mini that would be running mavericks or mountain lion then there are a few things to consider. If it's a like for like OS then it should be relatively simple.
report back and I'm sure one of us will be able to help you through it.
Thanks
Beatle

I had a mac mini on snow leopard but it broke.I now have a macbook pro on leopard how do I upgrade using the disks from my old mac mini

can I use the osx disks from my old mac mini to upgrade my macbook pro so i can then get a further free upgrade

You can not use a DVD that shipped with one Mac to load on to another. To upgrade to Snow Leopard you will need to purchase the Snow Leopard DVD.
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

How do I set up my Mac mini to read iTunes and iPhoto files from my new Mac mini server?

Want my old Mac mini to read iPhoto and iTunes files from my new Mac mini server. Old Mac has no more room to store files. How do I do this?

Hello,
Have you tried enabling iTunes Sharing & iPhoto Sharing on the Server?
Or maybe...
http://support.apple.com/kb/ht1449
http://www.apple.com/itunes/inside-itunes/2011/02/how-to-move-your-itunes-librar y-to-another-hard-drive.html
http://support.apple.com/kb/PH2506
http://support.apple.com/kb/ht1229

I am moving from PC to Mac. My PC has two internal drives and I have a 3Tb external. What is best way to move the data from the internal drives to Mac and the best way to make the external drive read write without losing data

I am moving from PC to Mac. My PC has two internal drives and I have a 3Tb external. What is best way to move the data from the internal drives to Mac and the best way to make the external drive read write without losing data

Paragon even has non-destriuctive conversion utility if you do want to change drive.
Hard to imagine using 3TB that isn't NTFS. Mac uses GPT for default partition type as well as HFS+
www.paragon-software.com
Some general Apple Help www.apple.com/support/
Also,
Mac OS X Help
http://www.apple.com/support/macbasics/
Isolating Issues in Mac OS
http://support.apple.com/kb/TS1388
https://www.apple.com/support/osx/
https://www.apple.com/support/quickassist/
http://www.apple.com/support/mac101/help/
http://www.apple.com/support/mac101/tour/
Get Help with your Product
http://docs.info.apple.com/article.html?artnum=304725
Apple Mac App Store
https://discussions.apple.com/community/mac_app_store/using_mac_apple_store
How to Buy Mac OS X Mountain Lion/Lion
http://www.apple.com/osx/how-to-upgrade/
TimeMachine 101
https://support.apple.com/kb/HT1427
http://www.apple.com/support/timemachine
Mac OS X Community
https://discussions.apple.com/community/mac_os

HT201335 why can't i get sound when I mirror from the latest mac mini?

why can't i get sound when I mirror from the latest mac mini?

if you have sound icon on your menu bar: press alt on your keyboard and click mouse on sound icon - check is the correct audio output is selected.
If you do not have this icon: System preferences > Sound > Output and check audio output

HT1515 I have moved from windows to mac and had to reset my airport. I am trying it to join the existing wireless network. the process ends in an unexpected error. The ethernet connection seems to work OK

I have moved from windows to mac and had to reset my airport express. After the reset I enter the name of the existing network, name the base unit, enter its password twicw and select additional options as join the existing network. It comes back with a screen asking for the name of the base unit and password. Aftre which it starts cycling between "waiting for airport express", "connecting to 'network name'" and ends with an error message. When I try to set up using ethernet cable evrything works but I need wireless (it worked OK just hours ago). Any advice?
Thank you

Hello, vgafromva.
Thank you for visiting Apple Support Communities.
Sometimes a simple power cycle of the AirPort can resolve this issue. However, here is an article I would recommend going through when experiencing issues connecting to Wi-Fi.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
If these steps do not resolve the issue, please reply back with the exact error message received.
Cheers,
Jason H.

Should I replace failed hard drive in imac 4,1 or run from external or mac mini?

My hard drive failed in my iMac 4,1 (early 2006 intel). I am running from an external drive, but slow. Should I replace the hard drive ($300 at Apple), purchase a better external to run from or a mac mini? I'm trying to determine if it makes sense to invest further in this iMac since its 5 yrs old already. Can any one offer some insight/opinion?

Hi moreenie
Your profile does not indicate your geographic location, but there are Authorize Apple Service Providers that can and will do the work for considerably less than your local Apple Store.
http://www.apple.com/buy/locator/service/
Call around, at less than $200 to replace the Hard Drive, it makes a little more sense to fix and use it for another year or two...
I replace the Hard Drive in my Early 2006 a couple of years ago not because it died, but because it became to small.
Sorry I can't honestly help you decide, because I'm torn and can't decide for myself. Not liking the Glossy iMac's, I've also been toying with the idea of either a Mac-Mini or used Mac Pro? My biggest problem with the Mac-Mini is, that by the time you do a few upgrades it cost as much as a base iMac.
Dennis

Downloaded tv show episodes. Bought the entire season and after watching one and downloaded first 4-5 they disappeared. This was during the time I was trying to migrate stuff from an older mac mini. Help?

I downloaded several episodes of the tv show "touch." I purchased the entire season and had watched one show. It took quite some time for each show to download, but I had downloaded 4-5.
About this time (within the last two weeks) I was trying to use migration assistant to migrate information from my older mac mini and my macbook. while I was able to move things from my older mac mini I noticed that the tv show went missing.
Also I purchased a program called 'Touched" in a season pass. After I downloaded a couple of episodes I watched one and continued to download the episodes as they were available.
I also purchased a program called "Tune Up" which elminates duplicates of iTunes songs. I have a large collection and this helped to get rid of the duplicates faster than clicking on them one at a time. Maybe this had something to do with the tv shows episodes and the podcasts disapeering.
Any ideas?

This may help
http://support.apple.com/kb/HT2519
As far as the TV series being in 1080p then that is upto the content provider and some older seasons are in 720p or only SD eg Stargate
It may well be that the season you want is only available in 720p

How can I transfer pictures from my old Mac mini to an external hard drive?

HHow can I transfer pictures from my old Mac mini to an external hard drive? Thanks.

Normally you should be able to drag and drop them onto the drive, provided the drive is Mac formatted. Have you already tried that?
Matt

Recently switched from powermac to mac pro5 2x2.66GHz 6 -core xeon running FCP 7 on OS 10.6.8 exporting qt files and rendering project files now takes longer than my old machine looking at activity mon and % of user is aroun 6 and % of idle around 42

recently switched from powermac to mac pro5 2x2.66GHz 6 -core xeon running FCP 7 on OS 10.6.8 exporting qt files and rendering project files now takes longer than my old machine looking at activity mon and % of user is aroun 6 and % of idle around 42 are all the cores being used with FCP7?

johnnyapplesod wrote:
exporting qt files and rendering project files now takes longer than my old machine
It's because the PowerMac G5 had HUGE bandwidth with a fat BUS on each processsor so they could run hard, hot and heavy.
It's not so with the Intel processors which are multi-core and share a common bus thus bottleneck.
The newer Intel processors can do more work on the CPU, but when it comes to in/out they are s-l-o-w.
I've had a wickedly fast dual processor (not dual core) G5, RAID 0 pair of 10,000 RPM drives as boot and a fast video card, I could do a lot very very fast.
You'll likely have to upgrade to Final Cut X to get more cores utilized, prepare to cry a little bit, Apple is working on the features they stripped out of it to make amends to pro users who complained loudly. (all over TV too)
http://www.loopinsight.com/2011/09/20/apple-releases-major-update-to-final-cut-p ro-x-release-demo-version/

Just moving from PC to Mac. How do you select a group of items. On the PC it was shift right click

Just moving from PC to Mac. How do you select a group of items. On the PC it was shift right click

In list or column view, click the item at one end of the range and then shift-click the item at the other end.
In icon view, click on an empty part of the window and drag to select them.
(113533)

I've just moved from PC to Mac, with my PC i and using Vmware Player I used to work on 2 Virtual M/C both on 2 external drives, one Windows Server 2000 as operating system and the sec. WindowsXP, is their a way to open these m/c on my mac

I've just moved from PC to Mac, with my PC i and using Vmware Player I used to work on 2 Virtual M/C both on 2 external drives, one Windows Server 2000 as operating system and the sec. WindowsXP, is their a way to open these m/c on my mac

I am so glad to hear about your success. As you are new to the Mac environment, I will be glad to help you more.
You said: "I can't change the setup yet but i have access". I don't understand what you mean about changing the setup! Please let me know more about that.
I also recommend to use Boot Camp, which allows you to install windows on a partition of your internal hard drive. This has many benefits. First, you can restart your computer and start up in windows. This makes your Mac device a complete windows machine and you gain the most from your hardware when working in Windows. Second, if a problem occures to your Mac OS X, you can restart your machine in Windows and prevent your data from getting lost. Third, you can import the Windows installed on the boot camp partition in to the Mac OS X using VMWare Fusion and work with it as a virtual machine. In this situation, VMWare enables you to work directly with your Windows in the boot camp partition. So it does not create a file package for the virtual machine in OS X.
Regarding the data safety and reliablity, I strongly recommend using Time Machine. You can also set it up to back up your virtual machines or not. This is possible to set up in the Virtual Machine Preferences Page in VMWare Fusion, or in the Time Machine preferences page in the System Preferences app of OS X.
Please don't hesitate to ask any other question. I will be glad to help you.

Moving from PowerMac G5 to Mac Pro, just swap hard drive?

Hey all!
I'm finally upgrading to a Mac Pro from my PowerMac G5. I'm hoping that I'll be able to take the HD out of my PowerMac and install it in the Mac Pro and be able to continue my work with as little downtime as possible.
Can you all confirm or deny that I should be able to do this even though I'm moving from a non-Intel to Intel machine? I'm running 10.5.4 on the PowerMac G5 now.
Thanks!

What I would do:
Install a 3rd drive and format.
Clone your OEM Mac Pro system to the new drive.
Disk Utility Restore is fine, but for keeping it updated, SuperDuper.
Migrate your home account only.
Copy only applications that can be drag-installed.
Install anything that has an installer.
Copy media and data files to 4th drive.
Pull the G5 drive for now. Later, when you know everything is working, reformat it to GPT (GUID partition table) which is default format. While APT is suppose to work, in reality it is best to reformat even if it is a data drive. And having your G5 OS is best wiped clean, though there should be almost zero trouble with Leopard and with applications that are Universal Binary (under Tiger there were problems and migrating would result in sluggish performance, problems and just not running properly, that may still be partially true).
Also, Apple's OEM drives are not the best always in the performance department and moving the system to a new drive helps. For $82 pick up a couple WD Caviar 640GB drives.
Add plenty of memory, check everything out as you move forward, and take precautions up front avoids problems later.
As an experiment, you could try removing the OEM drive and just try running off your G5 drive, as a test, and assuming it is also backed up.

Video Out from early 2009 Mac Mini

Is there any way to go from one of the video outs on the Mini to a converter of some sort, then to video input or S video input on a TV monitor? I see that the Mini DVI to Video does not work with my version of the Mac Mini. Any other solutions?

Grant Lenahan wrote:
The additional pins do little. A DVI-I plug will work with either.
What do you think wont work?
A DVI monitor will work on DVI or DVI-I.
A DVI-I monitor will work on DVI or DVI-I
Dont believe me? Try it ( or read the spec).
Grant
You commented as to why make the special connector. I gave an answer based upon the original question to this post which is about +_getting a analog composite video or S-video signal to a Mini, NOT a DVI monitor_+.
Apple makes and sells an adapter to provide composite and S-video from the DVI connector of certain Mac models of Macbook Pro and Mac Pro. (I use one.) But since the Mini does not produce the analog signals, the adapter will not work, even if you could physically plug it in to the Mini. So if Apple did as you say and made the computer with the connector to use either a DVI-D or DVI-I adapter, in my example, if the aforementioned person with lesser technical knowledge plugged in the S-video connector to the Mini, they'd be angry that it didn't work. Again to avoid the "Why would Apple sell something that wouldn't work on my computer if it fits?!" type of support calls.

Moving from PowerMac to Mac Mini

Similar Messages

Maybe you are looking for