Moving from Sup1a CatOS to Sup 2 MSFC questions

Hey,
Currently running a flat network with 1 x 6509 with a Sup1a and Catos at the core and 3550's in the wiring closet and STP.
I'm installing Sup 2 MSFC in the 6509.
Whats the current best practice on this move in terms of IOS or CatOS and how I address each closet.
I'm looking to route to each closet.
Create management vlans and separate user traffic.
I'm trying to come up with an implementation plan.
Thanks for any pointers, I am reading through the Cisco docs here as well.
D

When I take delivery of the Sup 2 MSFC2 will it be running NATIVE IOS or CatOS on the Sup and IOS on the MSFC ?
Or will I have to do an initial install ?
The reason I'm asking is I'm trying to work out and implemention plan. I want to backup the Sup1a's in the 6509 now and then take then out and put the Su2/MSFC2 in running just layer2, like it is now. Then work my way up gradually to layer 3 in each closet.
Thanks

Similar Messages

After moving from Entourage to Mail - a few questions.

I have just switched over from using Entourage 2008 to Mail, and so far I am happy (especially because of the better stability), but had a few questions about using Mail.app:
- In the list of mail items, how do I (can I?) select the last email in the list? In Entourage, I could press End and it would do that - now End just moves the list down but does not change the selection.
- I use IMAP, and I would like an option to just check the Inbox for new mail, not several seemingly arbitrary sub-folders, which is what happens when I choose Get New Mail for that mailbox.
- Mail.app is not honoring my Manually setting for Check Mail for my IMAP folders - it checks for new messages regardless. How can this be stopped?
- I don't like the relative dates ("Yesterday," "Today" etc) in the message lists - how can these be turned off?
Thanks for any pointers here.

One other question - is there an (elegant) way to set up a send-only email account? I have a forwarding account which I would like to be able to "send from," but I can't/don't receive at.

Might be a dumb question, but I am moving from 1st gen to iPadair; on Safari, 1st gen to delete apps/sites just visited, you could double tap home key and apps would appear on bottom and one could delete from there. How does it work on ipadair?

This may be a dumb question, but nonetheless, here goes:
I just moved from 1st gen ipad to new ipad-air. Great and happy! But, one thing I can't figure out how to do is to delete the pages/sites/apps that I have just used? For example, on the 1st gen. you could double-tap home button and past actions would come up on bottom of screen. I could then delete them one by one, to keep things cleaned up. Am I missing something here? Does it keep a log irregardless? Not the same as deleting history - at least didnt' work for me.

Close apps and not delete apps.
1. Double tap the home button to bring up the multi-tasking view
2. Swipe the app's windows upwards to close
3. The app will fly off the screen

Super slow itunes moving from track to track -BUT weird

This is a weird one. My itunes 7.6.2.9 is fine on searches with no numbers at the start. You can search quick and also flick throught the track list quickly as well. HOWEVER, start that search with a '1' eg 101 Number Ones and the search is slow and also moving from one track to another is painful. SWITCH that search to 'number ones'and the speed is as normal for searching AND moving along and to other tracks.... Sounds like a software glitch but very odd...

yeah, im having the same problem. moving from track to track is painfully slow.

I finally moved from Android to an IPhone 5s, my question is can i upload my music from my old android to itunes and if so how?

i finally moved from the Android world to an IPhone 5s i was wondering if anyone knows how to upload my music and pictures from my old android to either a folder on my PC or to itunes on my PC itself so that i can then sync it all to itunes so i can have all my music from my old android(HTC EVO BTW) to my new I Phone 5s?

You add music to iTunes via the File menu item in iTunes. Click on File, then Add file to library, or Add folder to library. Once the music has been added to iTunes, then you can sync to the phone. Once you have added the files/folder to the computer, you can add them to iTunes. Not exactly sure how to get the music from the phone to iTunes, but I would guess that it has something to do with however you were managing your music on the Android device.
Pictures once imported to the computer, can then be synced to the iPhone via the sync process. Once you have connected the iPhone to the computer and iTunes, then select the phone in the device list, tap on the photos tab, and select what photo folders you want to add to the phone.

I'm moving from windows notebook to MacBook Pro. When teaching I use a USB quality pointer device and want to know it the MacBook works with it

Greetings,
After using only Windows computers at work and home our company leadership now allows us to purchase Mac Pro Books if we desire. I am VERY excited!!!
Both of our sons work as engineers in Silicon Valley and will not purchase anything but Macs for years. Both son's schedules hinder me to get the answers quickly from them so I am seeking advice from you.
I love the idea of finally getting a Mac but have some questions and need to find a source to answer my questions before I send in the request for the new computer. If any of you could respond to these "beginner" Mac questions it would be wonderful.
1. I teach a large variety of classes using Powerpoint style presentations. I own a very nice wireless USB remote that I use to move between slides. Will the ProBook allow me the ability to use my remote? If so is there anything I need to know to make it work?
2. What are the tradeoffs of the 13 inch ProBook versus the 15 inch model?
3. What external devices/equipment should I plan to have available to be effective in an office environment?
4. In moving from Windows to Mac what is the best was to bridge the learning curve so I can become effective as quickly and effectively as possible?
I am very excited to make this change and your advice would be so appreciated.
Blessings,
David

David,
Have you checked the Web site of the manufacturer of your wireless USB remote, to see if their product supports MacBook Pros?
In general, the 13-inch MacBook Pro has less powerful hardware than the 15-inch model. A detailed comparison can be found in the right-hand column of the table here.
Which external devices/equipment do you currently have to be effective in an office environment with your Windows computer? The list is likely to be similar with a computer that runs OS X.
Which applications do you currently depend upon under Windows? That might be the best guide to providing advice on how to best adapt to OS X.

Can the SidHistory attribute be moved from one User account to a different User account in the same Forest/Domain?

Hello,
Can the SidHistory attribute be moved from one User account to a different User account in the same Forest/Domain manually with Active Directory Users and Computers or with something like Powershell? it would seem to me this is a safe operation.
Thanks for your help! SdeDot

Hi,
In addition, please also take a look at the below thread:
copy SIDHistory from one account to another in the same domain
http://social.technet.microsoft.com/Forums/en-US/2ca8727c-b3fd-4ef8-9747-99295f0cd61c/copy-sidhistory-from-one-account-to-another-in-the-same-domain?forum=winserverDS
Hope this helps
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Reports with prompting stop working when moved from Crystal10 to crystal 11

Issue:
We are having trouble with Crystal Reports XI. It appears that the Crystal 10 runtime included the ability to process reports that used prompting. If we run the same report with the Crystal XI runtime, it fails.
I can send a sample of the report.
Error Dialog:
Title: Internet Explorer Script Error
Error Details:
An error has occurred in the script on this page
Line: 1
Char: 1
Error: invalid character
Code: 0
URL: file: /// C:/Program%20Files/Business%20Objects/3.0/crystalreportsviewers11/prompting/js/promptengine_strings_en.js
Do you want to continue running scripts on this page?
Yes/No
Our Configuration:
We use Merge Modules that install Crystal Reports through the browser via a CAB file that we created. It runs a setup executable
The setup executable project that installs CR XI uses the following Merge Modules:
CrystalReports11_RDC_Reportengine.msm
CrystalReports11_RDC_Runtime.msm
CrystalReports11_HotFix_Merge.msm (This is contrived by us from one of your hot fixes)
Observation:
When the install is finished, the folder structure under u2026. Crystalviewers11/prompting do not have any files like they do if we install the development environment.
Question:
What do we need to do to correct this situation?
*why the reports with*
*prompting stops working when it is moved from a Crystal 10 to Crystal 11*
*environment. I believe that it has something to do with Merge Modules*
*because the files under the prompting folder do not populate with the*
*merge module like they do with the full install of Crystal Reports.*
Please help.
Best Regards,
Peter Freeman
Edited by: Vivek Kumar Sharma on May 19, 2009 3:43 PM

We have JDK 1.6 installed. The License Merge Module is not related to
this issue.
The files under \Program Files\Common Files\Business
Objects\3.0\crystalreportviewers11\prompting are not being installed.
If we copy files, into this folder structure the reports work.
One of the Business Object's Merge Modules should install the files
there rather than just an empty folder structure.
I got was able to figure out how to enter a customer support message.
They said that they could not support us because we were not on CRXIR2
(Crystal Reports 11 Release 2).
I found a download for CRXIR2SP4 (same thing service pack 4).
I installed it the Merge Module names changed to include a "_5"
Was:
CrystalReports11_RDC_Reportengine.msm
CrystalReports11_RDC_Runtime.msm
CrystalReports11_HotFix_Merge.msm (This is contrived by us from one of
your hot fixes)
Now:
CrystalReports11_5_RDC_Reportengine.msm
CrystalReports11_5_RDC_Runtime.msm
CrystalReports11_5_RDC_License.msm (should have been included)
*CrystalReports11_HotFix_Merge.msm (not needed anymore)
I will try to put a installer together with these. If this work there
will be some complexity around uninstalling the old one and installing
the new one.

Moving from Gmail to MobileMe/.Mac, in relation to an iTunes Store Account

I'm moving from Gmail to MobileMe since I got my iPhone, and as with every email change, a whole mess of online accounts follow. The process is simple enough for third parties like social networks, but Apple wants my life to super convenient and easy, and in the process made it even more confusing. My MobileMe account apparently already has an attached iTunes Store/Apple account, so I can't change my old account to log in with the @me instead of my @gmail. While I could simply stop using the Gmail, I receive iTunes allowances which would need to be re-set up and would lose store credit. What would be best is to simply merge the two accounts. Is this in any way possible?

HI,
can you still update your UAE purchased apps after this change?
Thx

Moving from Bridge to Lightroom, when adding existing files on hard drive, will metadata transfer? Should I choose embed sidecar in file handling or will it automatically happen if I choose standard?

Moving from Bridge to Lightroom. Will metadata in existing files be recognized by Lightroom, and should I select embed+sidecar when adding files to library for the first time.

Thanks guys, appreciate the feedback.
CHRIS - you are exactly right about my FUTURE workflow. What I'm trying to figure out now is how to best handle images already processed. My import should be OK based on the way I have duplicates in separate directories, BUT I'm wondering how to avoid seeing all of these duplicates in LR when I search by keyword, etc.? I guess I can somehow flag the RAW files and only get them in my results.
One question though - Stacks, etc. sounds great for the LR processed images. But what about variations based on processing in Photoshop after the LR Develop stage? I guess in this case I will just have to keep duplicate images if I have multiple versions from my PS work?
ISAAC - Thanks for clarifying that LR will recognize my XMP files from Bridge. What about the opposite direction . . . if I edit something in LR and capture this via XMP, it won't prohibit Bridge from recognizing XMP info if I access a file via Bridge, will it?
ALSO - Do you know where I can find info about tracking via XMP vs. the central database? You mentioned a couple of valid points, but I'm not sure I have a full handle on the pros/cons of these options.
Thanks!
Mark

Moving from nDS 4.1 on Windows NT 4 to Windows 2000

Having a problem moving from nDS 4.1 on NT 4.0 SP6 to Windows 2000.
First of all nDS 4.1 will not install on Windows 2000. It fails.
So I installed iDS 5.0 and everything went fine. Then I tried to import
users and it failed because of different schema. So then I tried to import
the schema. That didn't work or more accurately, I did not know how to do
it since iDS uses ldif files not conf files.
So I download and installed nDS 4.13. It worked and I moved the conf files
to import the schema and imported the users. Then the admin server service
quit working. The ipaddress had been changed, so I changed it back with
ldapmodify. Now the admin server service works, But I cannot connect with
the console to the server to make any changes.
Please help.
IPlanet actually emailed me after I downloaded iDS 5.0 to offer assistance
getting it setup. So I emailed then back and explained my problems and
asked specifically what versions of DS are supported on Windows 2000. They
now don't return my phone calls and every time I get through to them they
pass me off to a new tech who says he will get back to me. Of course they
never do.
So my question is how should I go about moving our Directory that is
currently running nDS 4.1 on Windows NT 4.0 to Windows 2000. What version
should I run. How should I move the directory. I am unfamiliar with the
replication options and how to use them if that would be the best solution.
Thanks in Advance.
Ted

I think DS 4.12 or later supports Win2K.
After you installed DS 5.0, you should have run migration. This would have migrated all of your config and schema and data from your 4.x server to your 5.0 server.
"The ipaddress had been changed, so I changed it back with ldapmodify." Ouch. Exactly what did you do? It is very tricky to change the admin server port number and get the console to work again.
"replication options"? Do you mean migration?
What is the desired outcome of this process? To have a DS 5.0 running on Win2K?

Primary Key Violation at the time of Moving from primary range to secondary range.

Hi Experts,
I've observed a strange issue in our environment.
we are using sql server 2008 R2 with SP2.
whenever a table is moving from primary range to secondary range on it's identity values, application is getting crashed with the message as below.
Violation of PRIMARY KEY constraint 'PK6'. Cannot insert duplicate key in object 'dbo.TD_TRANN'. The duplicate key value is (17868679).
The statement has been terminated.
OR
Violation of UNIQUE KEY constraint 'IX_TDS_COST'. Cannot insert duplicate key in object 'dbo.TDS_COST'. The duplicate key value is (17, 19431201).
identity ranges were auto managed by replication. agents are running continuous.
please suggest.
Cheers, Vinod Mallolu

Well this is pretty simple, so there are two type of subscriptions (Server and client) in merge replication. So while adding article you provide following parameters:
@pub_identity_range
@identity_range
You can check the details of above parameters on following article:http://msdn.microsoft.com/en-us/library/ms174329.aspx
Snippet
@pub_identity_range= ]
pub_identity_range
Controls the identity range size allocated to a Subscriber with a server subscription when automatic identity range management is used. This identity range is reserved for a republishing Subscriber to allocate to its own Subscribers.
pub_identity_range is bigint, with a default of NULL. You must specify this parameter if
identityrangemanagementoption is auto or if
auto_identity_range is true.
[ @identity_range= ]
identity_range
Controls the identity range size allocated both to the Publisher and to the Subscriber when automatic identity range management is used.
identity_range is bigint, with a default of NULL. You must specify this parameter if
identityrangemanagementoption is auto or if
auto_identity_range is true.
So for example you are adding "Server" type subscription then we consider @pub_identity_range value while assigning the range to that sub. If it is "Client" type subscription in that case we consider @identity_range value.
You could run following query to check the range assigned to each publisher and subscriber:
SELECT B.SUBSCRIBER_SERVER,B.DB_NAME,A.* FROM MSMERGE_IDENTITY_RANGE A,SYSMERGESUBSCRIPTIONS B
WHERE A.SUBID=B.SUBID
This should answer your other question as well.
Vikas Rana | Please mark solved if I've answered your question, vote for it as helpful to help other user's find a solution quicker -------------------------------------------------------------------------------- This posting is provided "AS IS"
with no warranties, and confers no rights. ------------------------------------------------

Just moved from DotMac/MobileMe to iCloud

and it is worse than I expected. I only use the mail part of MM and I've LOST the 2 most important features of the email:
I can no longer retrieve my mail from iCloud using my GMail account
So I have no way to get mail sent to my @mac.com address except by using my iPhone.
More importantly, I've LOST my @mac.com outgoing email address even though I specifically used that address for the transition
Now any messages I send will have a freakingly inane @me.com, which I NEVER asked for or wanted.
More and more, I'm becoming convinced that Apple doesn't want my business after 28 years of being a loyal customer.
I'll have to see what email subscriptions are set to the @mac.com address and change them to a NON-Apple related address. Then I will turn off iCloud Mail on my iDevices.
If anyone knows how to get iCloud email to be checked/retrieved by GMail, please let me know. Supposedly you can set the mail up to be forwarded, but I can't find out how to do this using my iPad/iPhone. Anyone know how to do it?

Yes, I read it but he didn't tell me anything that:
1. I had NOT ALREADY tried
2. I CANNOT do because of hardware limitations.
Taking his points one at a time:
A. Logging into http://www.icloud.com/
1. I can't do that on my desktop computers because NONE have Lion because NONE have a Core2Duo processor. IIRC, my web browsers can run on Lion but when run on pre-Lion OS, it doesn't work.
2. I have tried to log in on my iPad but I ONLY get the THREE (3) options I listed in my reply.
B. My @mac.com address not working for OUTGOING email
1. When i write an email message on my iPad/ iPhone, it is sent with the From and/or Reply headers set to @ME.COM, not @mac.com. I specifically mentioned this in my reply. I also specifically mentioned in BOTH posts that I HAD used @mac.com when moving from MobileMe to iCloud.
C. Update iCloud server settings
1. This is WHAT I'm trying to do. But I can't find a way to do this via my iPad/iPhone; it seems to require going to http://www.icloud.com/ (See A above)
D. Setting up forwarding
1. AGAIN, that requires going to http://www.icloud.com/. (See A above)
So I'll ask each question again
1. How do I setup forwarding of iCloud email using my iPad/iPhone?
2. How do I, using my iPad/ iPhone, setup my OUTGOING iCloud email to use @MAC.COM in the From and Reply To headers?
3. This is new. Can I use a Public Access computer a my local Public Library to go to http://www.icloud.com/?

I moved from USA to South Africa and now cannot play my music on my new PC. I cannot remember the password for my USA account so cannot deauthorize that account to allow me to play my music on my South African account. How can I now play the music?

I moved from USA to South Africa and now cannot play my music on my new PC. I cannot remember the password for my USA account so cannot deauthorize that account to allow me to play my music on my South African account. How can I now play the music? When I try to use my secret questions to access my old account I am told I have the wrong answers, including my own birth date!!!

There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
Then you'll find the control in the Store menu:
Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them:

Thinking of moving from O2 Broadband to BT : Opini...

Hi all,
I'm currently with O2 having been a customer with them for many years. I'm on a rolling month to month contract with them as I have never renewed since my previous contract expired last year. I've got my MAC having requested it last week and at the time O2 offered me free broadband for 12 months if I renewed there and then.
I'm unsure whether to stay or move with the upcoming sale of O2 over to Sky. As I said, been a happy customer for many years and its only recently I've had any hassles with speeds. In the evenings laterly from 18.30 onwards until about midnight my d/l speeds drop from a normally very good @16mbps to around 1-2mbps. This is becoming tiresome and despite having reported it to O2 Support they maintain there are no issues and that there is no congestion affecting me. Been getting nowhere with this problem so as you can understand I am reluctant to sign up with them for another contract at this time. So I've been looking at a move, perhaps to BT. My exchange details can be seen below along with my current line stats - my exchange looks to be getting FTTC in 2014 so I'll have to wait for that. Until then I believe I can get ADSL2+ with BT from my exchange so I'd like to aska couple of questions on not only that but on peoples experiences with BT if I may.
Firstly, has anyone else moved from O2 to BT and if so how did you find the experience and subsequent line speeds?. I'm of the understanding that I'll receive similar speeds with BT that I already get with my current O2 package?. Also, I assume since I'm on ADSL2+ with O2 at the moment that with BT's 'top package' I'll also be put on ADSL2+?.
We've been sent a letter by BT offering the 'top broadband package' for £11.10 per month for 18 months. This one:-
To thank you for choosing us, we've chosen you for something special. You can get our top of the range broadband package with unlimited UK evening and weekend calls for £11.10 a month, plus your usual line rental throughout.
Normally this costs £26 a month, so you'll be getting it for less than half price. You won't see this offer advertised anywhere. It's only for the handful of people we're writing to.
Here are some of the benefits that set this package apart:-
Unlimited usage. You don't have to worry about exceeding your limit or paying extra. You can download music, watch films and BBC iPlayer and play games - as much as you like.
The latest technology. You get our most reliable wireless signal ever to your laptop, desktop, tablet or phone, thanks to the latest Smart Wireless and 'N' Technology.
BT Home Hub worth £99. Your Home Hub is included. All you pay is £6.95 for delivery.
Free, unlimited wifi minutes. When you're out and about you can avoid expensive data costs by logging on with your smartphone or laptop at over 4.5 million hotspots in the UK and 3 million abroad - the largest wifi network in the world.
Free advanced McAfee Family Protection software worth £44.99, to help keep your children safe online.
Plus unlimited UK Evening and Weekend calls. You can chat away to family and friends every night and all weekend. Unlimited UK evening and weekend calls are all part of the package. And unlimited minutes to 0845 and 0870 numbers are also included within your calling plan times so you can ring companise like banks without worrying about costs.
Is that a pretty good deal?. Here are my current details, exchange and line stats:-
Many thanks for any replies.

Hi Cammy55,
I've moved your thread to the Bills & Packages board as it's more related to the BB&phone packages and hopefully you'll also get more of a response from the community members.
It terms of ADSL2+ and broadband speed, as long as your local exchange has been BTw 21cn upgraded ( which it looks like it has ) then you will be able to receive the ADSL2/2+ (upto 12mbps / 20mbps) service with a upload speed of around 1.2mbps.
Your line attenuation should also be around the same, so with a line attenuation of 20dB your line is approx. 1.4Km long which I would have estimated a broadband speed between 17mbps to 20mbps on a good quality line.
BT Retail should also give you an estimated broadband speed figure when your order or use the BT Retail BB checker.
Hope that helps,
Cheers
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved.

Moving from Sup1a CatOS to Sup 2 MSFC questions

Similar Messages

Maybe you are looking for