Moving from tape to disk

Just replaced my DV camera with a new diskbased camera. I want to export all my tapes to harddisks.
All tapes recorded in HD (Mpeg) I can play on all my video streamers without any problems.
But the DV footage captured in Premiere does not work.
Do Premiere do anything with the files during caputure?
How can I export my DV tapes so I can play them like other avi files without getting codec problems?
Thanks.

>DV footage captured in Premiere does not work
What ARE those files, and how did you get from camera to computer?
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
Report back with the codec details of your file, use the programs below
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainfo.massanti.com/
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project

Similar Messages

Restore backup pieces from tape to disk

Hello,
I want to restore the backup pieces from tape to disk. Is there any way of getting those bacup pieces to disk.
I have contacted storage team, that they can't copy the files, only through rman utility the files can be used.
I just need to restore the files from tape to disk. No, need to restore the database. I just need this for future purpose...
Thanks,
Ramesh G

You can try to use LIST BACKUP to get the backup piece name and then use Veritas tool to restore the backup piece from tape to disk.

Steps to restore RMAN backups from tape to disk

Hi All,
using Netbackup Veritas Volume
DB:10.2.0.3.0
OS:AIX 64 bit
Could nayone please share the steps to - restore RMAN backups from tape to disk.
An early reply would be appreciated!!
Thanks for your time!
Regards,

Hi,
I went through as per your action plan it is giving below error I found a solution on meta doc id 559190.1 but i am not able to understant how to start observiced as it is mentioned in the doc id.
allocated channel: t1
channel t1: sid=2386 devtype=SBT_TAPE
channel t1: Data Protection for Oracle: version 5.4.1.0
Starting restore at 09-MAY-10
channel t1: looking for autobackup on day: 20100509
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 05/09/2010 11:57:01
ORA-27191: sbtinfo2 returned error
Additional information: 2
RMAN>
Thanks,

Restore backup piece from tape to disk?

Hi,
Is it possible to restore rman backup piece from tape to disk? Please advice.
Thanks,

Is it possible to restore rman backup piece from tape to disk? Please advice.I dont think so it is related with ORACLE database to copy backup pieces from tape to disk.
You might have any other vendors like veritas, Symmetrix & all. We backup an Oracle database via the TDP application to tape

RMAN recovery from tape and disk?

Hey Guys,
Here is my scenario: -
I have Oracle 10g and I am using RMAN to backup to disk and then I use Networker to backup on tapes from disk (retention is set to 30 days on tapes). On RMAN - my retention policy is set to recovery window of 5 days after which it deletes the obsolete backup from disk and updates the control file.
My Questions:
1. If I have to recover any datafile or tablespace 20 days ago how can I restore it on Production. Since I am also backing up control files on tapes but my current control file will not have 20 days old information. Is there any way that I can restore my old backup?
2.How can I test my tape backup which is older than 5 days. In other words how can I restore my database from tape on another server/
Please suggest.

If you need to restore the whole database to a point in time that is 20 days old, you "only" need:
1. to identify the right control file backup
2. restore this control file backup with Networker
3. start the instance in mount mode
4. list required datafiles and archived redo logs backup sets listed in this control file with LIST BACKUP
5. restore these backup sets with Networker
6. restore and recover database with RMAN with the right SET UNTIL clause.
If you need to restore only 1 tablespace, that's Tablespace Point In Time Recovery (TSPITR) and is another story.
I don't think you can only restore 1 datafile that is 20 days old and leave other datafiles up-to-date (unless there is only 1 datafile in the tablespace and in this case this is TSPITR).

Restore backupsets from tape.

Hi,
We are on a 2 node RAC cluster, ASM. We run backups through rman.
Scenerio:
Rman backup runs and create backupsets in ASM diskgroup. We again run a tape backup to backup the backupsets to tape and delete the backupset from disk.
My question:
How can i restore the backupsets back to disk, if i have to restore a database?
I use the following to backup the backupsets to tape:
backup backupset completed before 'sysdate-2' delete input
But i'm not sure of what command to use to restore the backupsets back from tape to disk if i need to restore the database? Any help appriciated.
Thanks
Karthik

Hi,
You are keeping latest backups on disk and in case of any Disk failure, when you run RESTORE/RECOVER it will use the backups from disk.
In case if RMAN need more files then automatically restores needed archived logs from tape to disk during recovery.
Please keep backups in a separate ASM diskgroup, which should not contain active database files such as datafiles, control files, and online redo logs.
Regards,
Satishbabu Gunukula
http://oracleracexpert.blogspot.com

I have been asked to verify my account details. I have moved from UK to New Zealand. I cannot change my country from United Kingdom. When I tap on United Kingdom a red message appears telling me that I have unexpired video rentals, which is irrelevant!

I have moved from UK to New Zealand. I need to change my address within iTunes because my credit card is now billed to me in NZ. I have an iPad. When I tap United Kingdom within the relevant change personal details section, instead of allowing me to switch countries, a red message comes up telling me that I have unexpired video rentals. This is correct, but it does not help me switch countries. Can anyone help?

Nothing yet. I have changed my information back to the UK address and, though it is no longer correct, it now allows me to buy stuff. Not good!

Hard disk crashed, restored data from tape backup, Firefox not showing bookmarks. What is the location of bookmarks & favourites to ensure I have restored the correct file?

Hard disk crashed (XP), restored files from tape backup using Retrospect onto new Windows 7 laptop. Started up Mozilla after restore but bookmarks and favourites are missing.
I still have access to the backup tape and files. I was wondering whether the bookmarks are kept anywhere special other than the Mozilla program file that I restored.

http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile

Lost bookmarks, cookies and history when I moved the Folder 'Users' from the C disk to D disk. What can I do to retrieve them intact?

Lost bookmarks, cookies and history when I moved the Folder 'Users' from the C disk to D disk. What can I do to retrieve them intact?

Hi voyant
I would put the Users folder back... moving it will cause a lot of issues with applications.
Instead you can just copy individual files/folders from C:\Users\your_username\Documents,Pictures,Music.... to your D drive to save space on C.
-Curtis

Might be a dumb question, but I am moving from 1st gen to iPadair; on Safari, 1st gen to delete apps/sites just visited, you could double tap home key and apps would appear on bottom and one could delete from there. How does it work on ipadair?

This may be a dumb question, but nonetheless, here goes:
I just moved from 1st gen ipad to new ipad-air. Great and happy! But, one thing I can't figure out how to do is to delete the pages/sites/apps that I have just used? For example, on the 1st gen. you could double-tap home button and past actions would come up on bottom of screen. I could then delete them one by one, to keep things cleaned up. Am I missing something here? Does it keep a log irregardless? Not the same as deleting history - at least didnt' work for me.

Close apps and not delete apps.
1. Double tap the home button to bring up the multi-tasking view
2. Swipe the app's windows upwards to close
3. The app will fly off the screen

Moving from downloaded trial to licensed disk

I have purchased boxed disk CS6 extended for teachers for Mac. Last week I downloaded a trial of CS6 extended for Mac (not specified as teachers edition. )
If I use the disk to license and install will I still have the trial on my computer? ( Thus two programs)
Should I uninstall the trial first?
Can I just use the product code from the boxed disk to license the trial already there?

Yes, you can license the trial using the serial number from the discs. There is no need to use the disc.

Is there any way to know data is read from tape and written to disk

is there any way to know data is read from tape and written to disk

784786 wrote:
Just asked because I am doing restoration, I see files read from tape and then restored, but can't find them physically there.
Is there any way I can find it.What kind of restoration? What kind of files?
The usual "no information" question is of the form "My car won't start. Tell me how to fix it"
Yours is a bit different - "I tried to fix my car. Tell me how to know it's fixed".

I have the iPhone 5 and have with 6.0.1 software version. Although I had them when I moved from iPhone 4 to the 5, the latest update has most of my songs on the phone listed in grey (over 95% of them) and I can't play them. They are still listed though.

I have the iPhone 5 and have with 6.0.1 software version. Although I had them when I moved from iPhone 4 to the 5 (could play them), the latest update has most of my songs on the phone listed in grey (over 95% of them) and I can't play them. They are still listed in the iTunes library. When I look in the Summary for the iPhone, it shows Audio as only .16 GB - I have over 5 GB of songs, so what gives?
P.S. When I look at my Playlists most of the songs are greyed out. However, at the bottom of the list there is a cloud icon with a downward facing arrow. When I click on it each song starts to "load" and after a few minutes I have the songs back on in the list. I have to do this to all my playlists (I had over 100) in order to get access to all my songs. Then I did a sync and it happened again!
I use iCloud for documents and some other things (calendar, contact, etc.) but am not aware that I have anything music-wise in the cloud. Any thougnts?

You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.

Can't boot G5 even from OS install disk. Help?

I've trolled the message boards 25 pages deep and searched all the "Can't boot my G5" threads and still haven't found anyone describing what my machine is doing so thought I'd start a new thread in the hopes someone can help me out.
Ok I have a G5 dual processor machine. (Power PC chip, not Intel) Things went bad when I tried to do an Archive and Install of Leopard (OS 10.5) The install looked as normal until I got to one minute left on the install. At that point the install never progressed. I thought maybe it was doing some behind the scenes processing and decided to leave it over night. The next day my machine was still hung on that One minute left. So obviously it was a failure. Of course now the problem is I have an install that never completed of the OS and so that partition is, I assume, unbootable. Wiped away the Tiger OS and did a 99% install of Leopard. So I had to shut down by holding the power button.
I think to myself, "No worries I can just boot from my 2nd partition holding down the Option key to select it on the boot up screen". I always keep a partition with an OS on it for times like these. So I reboot, hold option key, select my other partition, things look OK. I get the grey screen with the Apple logo and I get the wheel animation turning. (Not beachball of death but the typical circular, almost sun ray configuration thing) At this point, usually the screen will go black for a moment before the desktop loads. However, in my case once the screen goes black after the load screen, it stays black. Now let me say the monitor does NOT turn off. There is a definite difference when I manually turn the monitor off. When off it's truly black. But this is like a power on black, not true black. (If you need me to explain this better feel free to ask me to clarify)
So the untouched, pristine Tiger partition boot is a No Go. I figured I'd then give up on trying to put Leopard on my desktop machine (I use it on my laptop) and reinstall the original OS and system software from the system disk that came with my G5. I boot machine holding down eject button, place the disk in, close the drive door and shut down again by holding power button. Reboot holding C key and the same routine happens with booting from the disk. Gray Apple logo screen, sun ray circle moving, screen goes black on the attempted transition to desktop .. but stays black. I also tried booting with my Disk Warrior disk to no avail. Same thing happens. (Also tried booting from disks by selecting them manually from booting with Option key down) At first I wondered if it was a monitor issue. That maybe my desktop was up but there was an issue with the signal being passed to the monitor on the resolution jump. Thought perhaps hitting the Eject key on the keyboard when I had attempted to boot from the partition (not from disk on this test) would tell me if it was a monitor issue. If it was a monitor issue, the disk tray should open. But alas, no.
So since I cannot boot normally from any partition or disk I decided to boot into single-user mode.
I did the fsck -fy thing and it told me everything was ok. I had also previously installed applejack and I ran that and short of correcting a few permissions and dumping some unneeded caches it came back with a system OK.
At my wits end I booted into target disk mode and ran Disk Warrior on both the original half installed OS partition and the back up emergency boot up partition from my laptop. Again, everything OK. Hoped against hope that I could actually install an OS onto my G5 from my laptop but I was only given the option of being able to do it from my laptop with the Leopard disk and it would only allow me to do it if I used Disk Utility to completely format that drive first. No, thanks.
Re-attempt to boot G5. Failure. So now I turn to hardware. Disconnected everything beside the keyboard and mouse. Try again. Fail. Pulled a couple sticks of Crucial memory out of the machine and left the stock RAM. No dice. Pressed the small power unit reset button under the RAM slots. No change. Zapped the PRAM. Still nothing. Try to boot in Safe mode holding down shift key. Doesn't work.
It seems to me if I can't even get the machine to boot from the Install disk that there is something going on that is much more major than software issues.
Bad motherboard? Any ideas? Because I'm all out of ideas.

Brother, Sound74, I thought I was the only one pulling the hair out of my chest one by one the past two days. Your situation is very similar to mine, and I'm just as clueless as you are. I started getting kernel panic screens, then nothing on boot, until finally I brought it to the local genius bar. They ran all the usual software/hardware tests, updated Tiger to 10.4.11, recommended I buy Leopard and do an erase-install. My computer, of course, was working absolutely fine by this point. I bought Leopard, came home, backed everything up, then tried to install the new OS. Like in your case, it just up and quit half-way through. Screen went black and a "No DVI Signal" message came on my display (it does this when I turn it on without first turning on the computer).
So I thought, well, maybe it takes a really long time to erase-install, and the monitor is just waiting for things to kick back in. I've always upgrade-installed before, so I couldn't tell if this was normal or not. But about half an hour later, my fans kicked in so fast I thought I had a P-51 Mustang taking off in my studio. I waited a bit more and finally force-shut-down my system. Not knowing what to expect, I nervously tried to re-boot.
Nothing. Zip. I can't safe boot, I can't boot from the installer disc, etc. The only thing I can do is the option-key thing whereby you choose the startup disc. And of course, it only gives the Leopard install disc as an option, because now the entire HD has been erased! But when I choose the Leopard disc, of course it doesn't work.
So I have a nice $3000 paperweight sitting in my studio. I guess I'll have to bring it back to the Mac store, where if it costs more than $300 to fix, I'm going to say screw it and put that dough toward a new iMac.
Sorry I couldn't provide any helpful info, but I just wanted you to know you're not alone in suffering the slings and arrows of outrageous technology.
Keep me posted on any solutions you discover, and I'll do the same.
Noochy1
PS My applecare expired a month ago! AAAAARRRRGGGHHHH!!! **** Murphy and his stupid laws.

I have moved from a G5 Powermac to an Intel Mac Pro and am porting over Items from a Backup HDD. How can I access and use drawings and documents created on the PC computer on the Intel computer ?

I have moved from a G5 Powermac to an Intel Mac Pro and selectively porting over items from a backup hard drive.
How can I access and use documents and drawings created on the PC based computer ?

Clarisworks, you need Appleworks, which will only work with Mac OS X10.6.8 or earlier. See this tip if you must go newer. Mac Pros with newer hardware configuration than July 20, 2011 can't use Mac OS X 10.6.8 or earlier without this tip and then it would be Mac OS X Server. I'm not sure if the new black Mac Pro supports that configuration or not.
iPhoto, there is an iPhoto for all versions of Mac OS X.
iTunes, there is an iTunes for all versions of Mac OS X. Note with iTunes versions 11 and later, which are needed for syncing with iOS 7 or or later, you will lose coverflow, if you liked that feature. Sadly you can't run an older version of iTunes from within Mac OS X 10.9 or later.
Sketchup: http://help.sketchup.com/en/article/60107 shows the versions that will work with intermediate Mac OS X versions, and this shows the latest version: http://help.sketchup.com/en/article/36208 be sure to click on the operating system you choose to use.
GIF - Viewing GIFs Apple's Preview can do that. Editing them, I like http://www.lemkesoft.com/ Graphicconverter.
DMG is able to be opened by all versions of Mac OS X. This are just "disk images" which store programs on a virtual disk that will open when double clicked. Frequently you'll find the installer of the said program inside. To find out if the program itself is compatible with 10.7 through 10.9, see http://www.roaringapps.com/
Otherwise see the resources on:
https://discussions.apple.com/docs/DOC-2455
If you end up deciding to stick with Snow Leopard.

Moving from tape to disk

Similar Messages

Maybe you are looking for