Moving GR Blocked stock to QI Stok

Hi Gurus
Is it possible to move the GR blocked stock directly into QI stock ?

Dear,
Its correct,
343 Transfer posting blocked stock - unrestricted-use stock
The quantity is transferred from blocked stock to unrestricted-use stock. You can also post the quantity to another storage location.
Possible special stock indicators:
E, K, Q
349 Transfer posting from blocked stock to stock in quality inspection
The quantity is transferred from blocked stock to stock in quality inspection. Here you can transfer the quantity to another storage location.
Possible special stock indicators:
E, K, Q
Regards,
Syed Hussain.

Similar Messages

  • Report for material moved from blocked stock to unrestricted stock

    Hi,
    Is there a standard report in WM showing list and qty of materials moved from blocked stock to unrestricted stock.
    Regards,
    Pratap

    It would have been easy if there was a specific WM movement type for such transfer but due to the reason that the WM 309 is connected to various IM movement types, there is no direct report to get this information.
    Conversely, you may use MB51 with the combination of the WM managed storage location and movement type for your purpose. If there are multiple storage locations assinged to the same warehouse then you may put a range in the selection criteria.

  • Warning when moving allocated stock to blocked stock

    Dear all.
    we are facing a problem with our quality / mm flow. We have materials that while in stock need regular quality inspections (every 72 hours) .
    Batch is inspected and passed inspection and allocated to a sales order / delivery but will only be shipped in a few days. Then the batch is inspected again and does not pass inspection. The inspection people move the material from unresticted to blocked status.
    However the delivery is goods issued and send to the customer because the quality inspection people don't get a warning that the batch is already allocated to a sales order when they do the goods movement into blocked stock.
    Anybody has a sollution?
    Regards,
    CvM

    Hi Lakshmipathi
    thanks for the info. However if I understand correctly this means that every batch needs quality inspection before PGI and that is not the case.
    Every 72 hours the batch will be quality inspected. In most cases the delivery and the PGI will take place within the first 72 hours. However in some exeptional cases the inspection will take place between Del note creation and PGI (not on purpose, just the 72 hour boundry, the quality inspection people are not aware of the delivery)
    At that time the batch is already allocated to a delivery yet during the quality inspection the batch fails the qualifications and will moved to blocked stock.
    The people who move the batch into blocked stock need the warning that this batch has been allocated to a delivery so that it can be stopped before the trucks leave our property.
    Regards,
    CvM

  • Blocked stock on a particular past date.

    In SAP is there any T code which will tell about, what is the total block stock in inventory during a particular past day.
    I am not asking the qty moved to blocked stock on particular day. That we can get thru MB51 mvt types.
    In MMBE, it will tell what is the blocked stock of particular material today. But I want to know what was the total blocked stock of particular material 5 days back.
    Example: 31.01.08 I got, Mat X- 100 pcs in blocked stock.
                   12.01.08- Mat X- what was the stock.
    I know our MMBE stock is dynamic and it changes time to time. Is there any logic to capture a previous day blocked qty.
    A day for me means. 6.00am morning of that day. this I am mentioning because, stock can vary any time in a day.
    I request someone to put, some vague idea so that I can also do brainstorming.
    Thx
    Viny

    Craig,
    Thats what I was also thinking to do.
    I have to see whether (summation of all 350 + 344 mvt type ) subracted by (summation of all 343 +349 mvt type) wrt a particular date.
    But this will cause inconsistency if unexpected movement types come into picture future.
    Is there any option to bring MMBE T code in notification action box. If so what is the functional module for that.
    Thx
    Viny

  • Blocked Stock to Quality

    Dear all,
    Material is quality managed. I recieved the items and out of total 100 Nos , 50 Nos are moved to Unrestricted and balance 50 are moved to blocked stock thru usage decision in QA11.
    Now I want bring the 50 Nos in Blocked stock to Qualtiy or Unrestricted.. Is there a way ? (Now the blocked stock are checked again by quality and found them Ok)
    Is there any way we can edit the usage decision transaction ? Or usage once made is final ?
    Appreciate your help.
    Regards
    Banniar

    hi
    you can post the blocked stock to unrestricted stock using MB1B using 343 movement type .
    or cancel the inspection lot and cancel the PR by using movement type 102 ,then again do the GR for PO and make the usage decision
    regards
    thyagarajan

  • Blocked stock and Goods Receipt Blocked Stock

    Hie to all...
    can any one tell me what is  Blocked stock and Goods Receipt Blocked Stock?
    regards
    R.Reddy.

    Hi,
    Blocked stock: It is the stock lying in our stock. i.e this stock is valuated. Material is moved to blocked stock under following circumstances.
    1.GR is already made, but there are some quality issues which can not be solved immedaitely. At the same time one should prevent the use of that material.
    2.During assembly / inhouse storage / internal movement if the material gets damaged & you can not scrap the material immediately as you are not sure about the reason for damage.
    Goods receipt blocked stock: This stock is non valuated. It is done,
    1.If there is gate entry(103 movement) for the material, which will be verified & released by the stores (105 movement) after verifiing the material with respect to the documents sent by the vendor.
    Hope this answers your question.
    Regards,
    Krishna A S V

  • Recurring inspection and blocked stock

    Hi
    - I have activated inspection type 09
    - Batch management is active
    - Next inspection interval is maintained in material master
    - Inspection lots are generated in QA07
    - Batch stock is moved to blocked stock
    Issue:
    When I record the usage decision I want the batch stock to be automatically transferred from blocked stock to unrestricted stock.
    How is this achievable?
    I have searched for function module but I am not sure whether this is correct?
    Please advise!
    Eva Ahrens

    Hi Amol,
    the inspection lot quantity is moved to blocked stock.
    If I run the process with move to QI stock, then the stock posting is working with transfer of inspection lot quantity from QI stock to unrestricted stock.
    The strange thing is also that when using blocked stock during the inspection there is no tab page for stock quantities in the inspection lot.
    But then it seems strange that this option exist - I seem to remember when testing appr. 10 years ago that it was working - perhaps a function module needs to be assigned to the usage decision code? I have looked but not found any suitable one yet.
    I appreciate your help!
    Eva

  • GR-blocked stock VS Blocked stock

    Dear all,
    I still have some confuse with the concept and use of GR-blocked stock and blocked stock.
    As far as I know, GR-blocked stock is usually triggered at the point of goods receipt with ref to PO. If the goods are not satisfy with the requirement, then post the goods to GR-blocked stock via 103.
    However, under what circumstances we need to post the goods to blocked stock?
    Thanks in advance for the guidance.
    Thanks.
    Best Regards,
    Edwin

    Hi,
    Good receipts is done in Unrestricted stock (or) Qualtiy Stock (or) BLOCKED stock
    Movement type - 101 Unrestricted stock (or) Quality Stock
    what circumstances we need to post the goods to blocked stock?
    during inwarding if you found that the lot will having problem where the value is more and qty is more
    you will inward in Blocked stock
    Movement type -- 103 - For blocked stock in this you are moving to block stock if  you see the P.O history of the p.o. there will be qty updation and value updation is not there
    when u move from block stock to unrestricted stock using movement type 105
    stock will be getting updated and valu also
    You have totally confused
    G.Ganesh Kumar

  • Gr Blocked Stok or blocked stock Stop type setting in OMJJ

    Hi,
    Movt. Type 103, used to post material in GR blocked stock, just want to know what setting in OMJJ for movement 103 used to POST Material stock into GR Blocked Stock only.
    Edited by: V raj on Aug 27, 2009 3:08 PM

    Hi Raj,
    After u enter the movement type 103 in OMJJ , in the first screen u will find Internal Control -- GR Blocked Status (S).
    Regards
    Ramesh Ch

  • Blocked Stock in Process Order

    Hello, Expert,
    When i doing the process order confirmation, total 100 pc for material A, is it possible to post 95 pc into quality inspection (stock type control for GR in process order header) and the other 5 pc posted to Blocked stock? In our real practise, these 5 pcs are damaged products.
    If it's possible, which movement type shall i use and how it works?
    Secondly, in the process order, can i consume the components in blocked type? (not Unrestricted Use)
    Many thanks,
    Vincent

    Hi
    UD means Usage Decision.
    1. You can mark it as a scrap quantiy for 5 pc.
    2. You can't consume the blocked stock components unless it is moved to Unrestricted stock.
    Experts, Correct me if I am wrong
    Thanks
    Saravana

  • Recurring inspection for blocked stock

    Hi all
    I am trying to create an inspection lot for recurring inspection for my material. Now the stock for this material is currently blocked. What I want to know is if its possible to have blocked stock moved into quality inspection for recurring inspection.
    Regards
    Obie

    Hi Obie,
    I am not sure but it may not be feasible to move the batch stock from block stock to quality inspection with recurring inspection. As I checked in OMJJ, I did not find QA07 transaction code as allowable for 349 movement.
    On the contrary, once the batch reaches to its expiry, stock can be posted to QI or block from unrestricted.
    I would suggest to use 08 inspection type for transferring material from block to quality inspection.
    Regards,
    Anand Rao

  • QM Rejected  GR blocked Stock

    Dear All,
    Material transferred to GR blocked stock against purchase order thereby for clearance from QM. QM rejected Lot & Lot remain in GR Blocked Stock. Now how it can be moved to unrestricted stock as it shows meassage " Good Receipt Blocke for Purchasing Document by QM only" while doing Mov. 105 i.e. GR Blocked Stock Reversal.
    Pravin

    Let me repeat what I understand.  You received the material via GR from purchase order.  The material is QM-activated, therefore inspection lot was created.   After inspection, you made UD to reject and move the stock to block stock.  Now you want to return the material to vendor.
    There are two movement types that you can use for this scenario - 104 (Goods receipt for purchase order -> GR blkd stock - reversal) in case you still don't get the credit memo from vendor; or 124 (Return delivery from GR blocked stock) if you got one.
    Movement type 105 is used for another purpose.
    Try this out and revert back.
    Rgrds,

  • MFBF GR to Blocked stock

    Hi Guru's
    I want MFBF GR to blocked stock atomatic , with out using a Edit--> change detail settings-Blocked stock setting,
    i tried with assigning  103 Mov tye in Rep mfg profile for GR but it is giving Below error,
    Update control of movement type is incorrect (entry 103 X X _ F)
    Message no. M7226
    Diagnosis
    The system could not find entry 103 X X _ F in any of the movement type control tables.
    Procedure
    Cancel current processing.
    Contact your system administrator.
    Action to be taken by the system administrator
    Check in Customizing for Inventory Management under Copy, Change Movement Types whether the entry is contained in the Update control view for the movement type.
    If the entry is missing, proceed as follows:
    For standard movement types, this means that the given process is not supported using the present data combination. Do not create any entries without prior arrangement with your SAP consultant. Otherwise, incorrect postings may result.
    For customer-defined movement types (beginning with 9, X, Y, or Z), this may mean that they have not been fully defined. Delete the movement type and re-create it by copying a standard movement type.
    So could any body help in this regard.
    Reg
    Madhu

    Hi Prasobh,
    Its my client special req, when ever they wanted to do MFBF it should go to Blocked stock , reason is it will not be allocated to any customer without specific req, based on the customer requirement, the material will be moved to unrestricted stock with special labeling against the customer and customer label and code , with Testing,
    i hope you understood this,
    Thanks and Reg
    Madhu

  • Block Stock to QM Stock

    Hi Gurus,
    We have a requirement for moving Block stock to QM stock ( with stock posting).
    Once the materials is received the stock will be posted to block stock and when needed the blockstock will be moved to Qulaity and checked and posted accordingly.( right now Notification is not activated).
    Is there any way for this?
    regards
    Santha

    If you post material to Block Stock mvt is 350
    If you want to post back to QI >Mvt type 349 though MB1B->activate 08 inspection type before doing mvt
    This will create a lot of 08----
    >make posting from QA32 accrodingly

  • Movement type for Unrestricted to Blocked stock

    Can anyone tell the movement type for moving material from unrestricted storage location to Blocked stock for scrapping purpose.??
    Also tell if any other way is also there...??
    regards
    Inder Pal

    Dear sasikanth
    If I am correct,
    321 is for transferring quality to unrestricted and
    322 is reversal of 321
    which means, unrestricted to quality.
    Correct me if I am wrong.
    Thanks
    G. Lakshmipathi

Maybe you are looking for