Moving graphic slide from Keynote to Pages

I have created a graphic slide in Keynote and moved it to a document in Pages, BUT it expands in Pages.
Can I lock the size in Keynote before I move the slide?
or
can I scale it in Pages WITHOUT everything being distorted?
Thanks
Bo

Hi Bogerv,
Hold down the Shift key then bring in the handles. This will keep its proportions with out distortions. Also, when I copy a graphic from Keynote '09 to Pages '09, then looking in Inspector they're both the same size. Sorry I cannot replicate your anomaly.
If that isn't what you desire please post back with more information as to what you're doing, how you're doing what you're it. The more information the better we should be able to assist you.
These Discussions are enduser helping enduser, not Apple employees answering questions. Apple provides these discussion forums for endusers however, Apple neither monitors nor engages in discussions. Enduser such as yourself when they have extra time answer questions.
Again, welcome to Pages '09 Discussions, have fun here.
Cordially,
RicD

Similar Messages

Page Layout when Printing slides from Keynote

I don't often print my Keynote presentations, but I would like to be able to print FOUR slides on one sheet (landscape format) with one slide in each quadrant or corner. All I can select --as far as I can tell-- is a single column with all 4 slides minutely scaled down the page. The slides are far toooooooo small to read. CAN I CHANGE THE LAYOUT FOR PRINTING SO THAT HAVE 2 COLUMNS OF 2 SLIDES EACH? Many thanks for your suggestions!

When I do Print > Handouts > 4 slides per page, it puts the slides stacked on top of one another (ie 1 column of slides, 4 rows). I assume you would want to have 2 columns of slides and two rows. I don't know how to do this in Keynote, but if you are in Keynote, just do a File > Export > PDF. If you are printing in color, I'd select Image Quality > Best. Once you have the PDF of the presentation, open it with Preview. From Preview, do a File > Print. When the Print "window" comes up, you select your landscape orientation. At the bottom of the window, you will see a dropdown option that says "Images per page" and select 4. This should do the trick.
Be careful when you do the export from Keynote to PDF. There are a lot of options to include or exclude page numbers, builds, etc. in the PDF.
Hope this helps.

Graphics linked from FM reference pages don't display

Before I tell my department that they must edit each of the
hundreds of caution and warning notes in thousands of pages:
Is it true to say that graphics linked from reference page in
FM do not appear in help files?
This is a commonly use style:
Paragraph Designer / Advanced tab / Frame Below Pgf

Matthew Ellison- the baggage file idea was a help. Thanks!
Here is the only way I could get the reference page graphic
to display in a .chm help project.
And note, this method does not use FrameMaker's graphic, this
method re-introduces the same graphic into RoboHelp by including it
in as a background image in a css file.
- In Robohelp Project Manager, I must link to the graphic as
baggage item
- The FrameMaker para tag must be mapped in RoboHelp
(Properties, Style Mappings) to a special css style that includes
the graphic as a background image (see example below).
- The graphic must appear in Project Manager list of images
for the project file for the framemaker chapter.
- And here's the deal killer, in order for the graphic to
appear in the project file for the FM chapter,
I must use the graphic somewhere in the FrameMaker as a
discrete graphic. (It's not enough to just include the graphic in
the folder using windows explorer.)
So each chapter of FrameMaker must include a page displaying
any icons being used in that chapter (can't refer to the reference
page, must be linked to outside file)
Weird.
And there goes another day of my time...
css style definition for paragraph tag with linked icon:
P.note_elect_warn {
background-image: url(electric.png);
background-repeat: no-repeat;
background-position: 16px 28px;
height: 100px;
width: 100px;
font-family: Arial, Helvetica, sans-serif;
font-size: 20px;
font-weight: bold;
color: #0033FF;
text-align: center;
PS I do all my stylesheet editing in Dreamweaver, and I don't
have a problem, as long as I:
- Remember to save the css file before I run RoboHelp.
- Allow Dreamweaver file to accept outside edits to the css
file, and reload the css file.
PS 2
In the CSS definition, the background-image must be in the
same folder. In other words, this won't work:
background-image: url(icons/electric.png);
only this:
background-image: url(electric.png);
PS3
A FrameMaker paragraph tag that consists only of autonumber
text will not be picked up for mapping.
You can force RoboHelp to notice the FrameMaker paragraph tag
by typing in a few letters where the tag appears on your FrameMaker
page (which you can later remove, and the style will remain).
For example, if you have a paragraph tag with Autonumber text
that places the word Thanks!, RoboHelp ignores it unless you add
some content to the the paragraph tag on the page, like Thanks!
...for all the fish...
Later, you can remove ...all the fish...

Slides from Keynote (not about the audio issue)

Am I correct in assuming that Keynote slides exported with the "interactive" command should be interactive in iDVD?
When I open the .mov file in QuickTime the slides play fine with the (start and stop) interactive control. But when I bring the same .mov into iDVD, the slides misbehave. The first two or three slides flip over very fast, then the show stops.
What gives? Could this be because I'm using the trial version of Keynote?

DVD media is not really 'interactive' and so Keynote presentations intended for iDVD are merely slide shows - you set the image duration and transition duration - and don't allow you to 'click' anything to advance to the next slide.
Note that when you Export a presentation from Keynote, if you choose QuickTime you are given the Interactive choice, but if you choose iDVD there is no Interactive choice.
On your computer, a Keynote presentation exported for Quicktime with Interactive selected lets you click to advance to the next slide. A Keynote presentation exported for iDVD opens in a traditional QT movie window and runs straight through the entire movie with no interaction.
Sorry, but DVD playback doesn't work this way.

Printing slides from keynote

How do you print 3,6, or 9 slides to a page from iPad Keynote to use as a handout?

If you want one full slide per page, print "Individual slides". For a nice layout of multiple slides without notes lines, choose "Individual Slides" and change the Layout/Pages per sheet to 6 (or whatever) per page. Then you don't waste any space on notes lines. It still will show in the preview that you are printing one slide/page but when I tried it, it printed 6 slides/page without being crammed into the corner of the page.

I get poor picture quality when I export my slides from keynote as jpeg and print them as a photo, any help?

I made a slide of multiple pics and objects, I am trying to export it to an 8x10 photo, the shop I am using only allows jpeg. The quality is so poor when I print it, is there a way to get better quality as I export it? I used keynote because I could set up a custom slide size (8x10) and then added the pics and other graphics in hope I could export as a jpeg and get a good quality photo? The photo images and slides are good quality it is the exporting where I am loosing clarity.
Ugh any help?

I made a slide of multiple pics and objects, I am trying to export it to an 8x10 photo, the shop I am using only allows jpeg. The quality is so poor when I print it, is there a way to get better quality as I export it? I used keynote because I could set up a custom slide size (8x10) and then added the pics and other graphics in hope I could export as a jpeg and get a good quality photo? The photo images and slides are good quality it is the exporting where I am loosing clarity.
Ugh any help?

How can I export a slide from Keynote to iMovie HD?

I've tried to export a slide with animation into iMovie HD. The settings I'm using are 320x200, frame rate: 30 fps, Progressive, 16x9, Data Rate: Automatic. When I export and import into iMovie Hd the resolution is blurry and grainy.
I initially tried to build a title sequence in Keynote. The title sequense transitioned into a quicktime movie clip, transitioned into a title sequence. The audio portion worked to time but the video output was increased by :30 seconds and was out of sequence. I played with the settings and deleted the preference plist for iWork, but the timing never worked in Keynote.
The timing works in iMovie Hd, but I the titles are grainey and poor resolution.
Any thoughts?
Thanks,
Jeff

The source is DV 16:9. I've adjusted the resolution to 360:202 and compressed with Sorenson to a QT 512 streaming clip. The resolution is very good and I don't have any issues with the video. I've imported the video clip into Keynote and assembled the title sequence. It looks good with no blurring or choppiness. The problem comes when I export. The timing goes off and the length of the entire video clip is increased. I've also had problems with Keynote when exporting. It seems to be inconsistent and will drop the last title, even though the preview worked fine. I've worked around the problem by importing the title slides with out the transitions and then going into Final Cut. I'd like to keep the title transitions that I had in Keynote . Any thoughts? Thanks, Jeff

Screen shots - From Keynotes to Pages

Hi all,
I am typing a document and need to insert some screen shots from a slide show.
I tried apple + 3 + shift, but the picture comes with parts of the desktop.
What do I do if I only want the slides?
Thanks
Message was edited by: fromselena

Hi, I also like to use the "capture widget" located at http://vanillasoap.com/widgets/ I find it easier than remembering shortcuts on the keyboard. If you ever need a more intensive screen capture, then check out Snapz Pro X located at http://www.ambrosiasw.com/utilities/snapzprox/ It is a little more pricey, but the ability to do video is key for me. Cheers!

Inserting Slides from Keynote (Is this going to work?)

Hello,
I am creating a FCP movie that will initially primarily be distributed as a DVD and have shot a presentation and am using multi-cam editing to complete the project.
I have exported in "best quality" some keynote slides with text that need to inserted over top of some of the video without disrupting the time line, which is mostly real time with a few "goof ups, can we do this part again" cuts.
What I'm noticing is that in placing the keynote slides (now TIFF pictures) in the V2 track, that it looks to me like the text is rough when playing in the canvas.
When I open the slides in osx Preview, they are perfect.
I am concerned about the quality of the inserted slides being really bad in the finished project, and don't want to spend the time doing this the wrong way if there will be a problem, and have to do it again.
Feedback is so appreciated

Thanks, Nick!
It's good to know I did something right today. I exported the slides to pictures at the same resolution as my video.
And I really appreciate the link. No point in having a whole new thread when I couldn't find the one that gave the answer!

Moving 'Logon' text From top of page to bottom?

Hi,
I'm using a Theme Greyscale #17 in my application. At the top of all my
pages I have the Company Logo at the Top Left side and a Navigation Bar
on the Top Right. But the Template puts the Users Login (i.e. JSMITH)
just to the right of the Company Logo and it looks funny there. Can somebody
explain how I put the User's login at the bottom left position of the screen?
I don't have an understanding of how to modify Themes/Templates. Thanks
for any help.
Carol
Currently:
[Company Logo]JSMITH HOME | LINKS | ADMIN | HELP | LOGOUT
I'd like it like:
[Company Logo] HOME | LINKS | ADMIN | HELP | LOGOUT
Page Regions
JSMITH
Edited by: Carol_new_to_APEX on Apr 2, 2010 10:08 AM

Go to the shared components section of your application.
Click on templates
Find your default page template (There will be a tick mark near it).
Click on the template name.
I think the parts you are looking for are: #NAVIGATION_BAR# and &APP_USER.
hth,
John

How can I export a graphic slide with a quicktime movie from Keynote?

I export a title slide with a quicktime movie from Keynote to my desktop and it plays fine with audio. Once I insert or drag the clip into iWeb the resolution is degraded and very choppy. The resolution is 320x200 and I'm exporting from Keynote as a custom size (320x200) Frame rate: 29.97 Key Frames: Automatic Key Reordering is checked Data Rate: Automatic Quality: Multi pass. I need some help.

how large is the video and if you publish - does it still have the same horrible quality?
you might considering exporting as flash (loads faster) and integrating that into your iweb site using post-editing: http://karreth.com/index.php/articles/iframes-iweb/
max

Moving graphics from under a layer to above it

Hi -
I'm trying to figure out how to move some graphics around in my presentation. I have a photo of a book--I'd like to make another image swing out from behind the book and land on top of it. I played around with duplicating a slide and tried to adapt Magic Move to do it, but that didn't work. Any ideas?
Thanks!

Dolt,
What you want to do is a real challenge since it requires moving an object from one layer to another.
One possible way to do this would be to start the action with the image behind the book and swing out. At its maximum position away from the book, copy the image in that position and place it on a new layer above the books layer. Then, and this is the tricky part, have the upper image appear and the lower image disappear simultaneously, then swing the top image over on top of the book.
So it is clear, you have two copies of the image - one on the lower layer and one on the upper layer and you need the following:
action > move the lower image out from behind the book
build-in > the upper image appears on top of the lower image
build-out > the lower image disappears with the previous build
action > the upper image moves to on top of the book
I'm not sure this is exactly what you want, but it might work. Try it and let us know.
Good Luck.

Hi, please how can I transfer purchases from the app store on Mac to my iPad ? I purchased keynotes, numbers ,pages and other items. I really want to have them on my iPad . Thanks.

Hi please how can I transfer purchases from the app store on Mac to my iPad . I downloaded keynotes , numbers, pages and others and will want to have them on my I pad thanks.

Apps that are written for the Mac OS cannot be used on iOS devices, such as the iPad. You can purchase the iOS versions of some of these apps in the iTunes App Store.

MOV exported from Keynote - last slide disappears, audio continues playing

I have a series of three mov files that were created in & exported from Keynote. They are audio & slide shows that are to autoplay on a website. Two of the files function as expected once embedded in the website, one does not; the last slide drops out (displaying a white screen) while the audio continues for approximately 30 seconds until the mov file ends. To add confusion to the issue ALL the files play as expected using Safari (on Win & Mac). Using Firefox on Mac delivers the "broken" results. Using ANY browser on Windows yields the broken result.
Any suggestions from anyone as to what could be causing this? A link to the website I'm talking about is below. The problem file is on index2.html

Hi,
Since I am trying to do a number of things with Keynote, I read these discussions looking for opportunities and pitfalls.
I read your message, and saw your outcome as an issue. Since I've yet to add the soundtrack to my current project, I needed to know more about the outcome before I proceeded, in order to adjust accordingly.
I took my project, and added a song as the soundtrack. I played the slideshow, and the soundtrack played along, across the slides as it should. I then began to record the slideshow, but the soundtrack came playing through the speakers and was being picked up by the microphones, so I offed the speakers, donned my headphones, and re-began the recording. The soundtrack was playing (in the headphones), and I was narrating across many slides.
I played the recorded slideshow, and all was present - soundtrack and recorded narration.
I exported to Quicktime, sending the output to a new folder so that it could easily be found, along with anything else that might be generated. Upon completion, there was only one movie file in the folder. I opened and played it in Quicktime. It was perfect - slides looked good, narration was there, and the soundtrack was playing in the background.
This outcome appears to be your objective, so I'm not sure what I did differently than you, but from this experience, it works as should be expected.
Good luck.

Creating I Movie from Keynote Slides

I'm trying to create an iMovie from slides I created in Keynote - I created them in 1920 by 1080 pixels. When I import them to iMovie - through I photo - they are fuzzy when I try to use them. I want to use I movie because I want to use video's as well. Any help would really be appreciated!!

Keynote: Exporting a presentation from Keynote to iMovie
http://support.apple.com/kb/HT2655

Moving graphic slide from Keynote to Pages

Similar Messages

Maybe you are looking for