Moving hyperlinked images

I have created small .jpg images of the front page of PDF documents that I want to link to in my website. Before I attach the hyperlink, I can easily select and move these images around the page, but once they are linked to my documents, I can't select them individually anymore if I want to move them. Rather than the select arrow, all I can get is the Hand Icon when I mouse over them. Any thoughts?

I just found the answer to my own question. All you have to do is unclick "Make hyperlinks active" in the inspector and you are able to select images in the regular way!
Feeling somewhat like a bonehead!!

Similar Messages

Image size changes when moving an image between Lightroom and CC.

Image size changes when moving an image between Lightroom and CC.
I opened a .dng image in LR and then opened it in the Develop module. I clicked on Crop Overlay and then on the ‘As Shot’ drop down menu (the lock is closed) and cropped to 11 x 17 and clicked ‘Done’-.
I click Cntl-E and the image opens in CC. There I click on Image > Image Size and the Image Size is 13.288 inches by 20.533 inches.
Why does the image size change?
I believe there is a menu to control the size of the image and I've looked everywhere I can think of in LR and CC, I googled various descriptions and I checked two of Scott Kelby's books, but I just can't figure out how to keep the image a consistent size when moving between LR and CC.
Help!...Please?

The penny will drop soon or maybe the cloud will lift.
In Lightroom all editing is undoable/nondestructive.
Hence a crop of 3x2 is not inches, centimetres, pixels or anything else. It is jst a ratio. When a file is exported, either to PS or disk, then the crop ratio has size determined in respect of pixels and inches or cms.
So my 6000x5000 pixel image I will crop to 3x2 that leaves (before exporting) a 6000x4000 file.
Now when exported it can be set to export at
100pixels per inch and will end up at 60x40" when printed.
200pixels per inch will end up at 30x20"
300ppi will end at 20x13.3"
You will notice in the Crop Tool there are no size denominations such as inches or centimetres as an image file only has pixels and the determination of size is done through exporting or printing.
Hope that helps somewhat..

Moving multiple images

I'm using RoboHelp 7.02. I have several images that were
imported into various help files at the top level. This really
clutters up my Project Manager, so I set about the task of putting
all those images into an Image folder.
I was happy to discover that moving an image in Project
Manager updates the links in the topics. But, I cannot select
multiple images. Is there a method unknown to me for selecting
multiple images so I can move them into the Images folder while
updating the links in the topics?
Kevin

As above, it is not possible.
The more people who report a bug or request a feature, the more likely it is to be actioned. Please follow this link.
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Drawing moving GIF images?

Is it possible to draw moving gif images on a simple Frame applet?
I made an image drawer class for my applet and i can draw simple 2d images.
Here is the basis of my GameSprite class;
    public byte[] pixels;
    public int width;
    public int height;
    public GameSprite(String imageName, int requestIndex) {
     try {
                // Removed code, it's zipInputStream, but it can be used just as ./image.jpg etc
     javax.swing.ImageIcon icon = new javax.swing.ImageIcon(fileBytes);
     width = icon.getIconWidth();
                 height = icon.getIconHeight();
                 pixels = fileBytes;
     } catch(Exception e) {
          e.printStackTrace();
    public void drawSprite(int x, int y) {
     try {
          Image image = Toolkit.getDefaultToolkit().createImage(pixels);
                                //Removed code here
          graphics.drawImage(image, x, y + 7, width, height, observer);
     } catch(Exception e) {
          e.printStackTrace();
    }If i try to draw an animated gif image it dosn't move.
Thanks for any help.

In Java you need to override the paint method in AWT and paintComponenet method in SWING to do graphics/animation. If you go to an offscreen rendering, then you can paint to the graphics context of an image you use for a drawImage in your paint/paintComponent...
If you where overriding a Panel in AWT you would override paint:
public void paint(Graphics g){
g.drawImage(im, 0, 0, this);
}Then where you are maipulating your graphics you would do something like this:
//code snippet
Graphics g = im.getGraphics();
//make what ever changes to im by manipulating the graphics context g
repaint();

Moving GIF images

Hi
Earler I had Golive and could make moving GIF images in a timeline. Can ayone tell me how it works in Dreamweaver CS4?
...from the beginning..
Sten, Boras, Sweden

In Java you need to override the paint method in AWT and paintComponenet method in SWING to do graphics/animation. If you go to an offscreen rendering, then you can paint to the graphics context of an image you use for a drawImage in your paint/paintComponent...
If you where overriding a Panel in AWT you would override paint:
public void paint(Graphics g){
g.drawImage(im, 0, 0, this);
}Then where you are maipulating your graphics you would do something like this:
//code snippet
Graphics g = im.getGraphics();
//make what ever changes to im by manipulating the graphics context g
repaint();

Hyperlinked images thin line in iExplorer

When I tested my website it worked fine in Firefox and Chrome, but not in iExplorer. Hyperlinked images got a thin purple line around them. Does anyone know how to remove that? It'd be very helpful! Thanks in advance!

Hello Roger,
in addition, to the hints from above:
Add this to your CSS code:
a img {border:none}/**removes borders from LINKED images**/
img {border:none} /**removes borders from NON-LINKED images**/
and have a look at David_Powers detailed elaborateness here: http://forums.adobe.com/thread/417110.
Hans-Günter

Moving an image in a drop zone

Is there any way of moving an image in a drop zone? at the moment its cropping the top half of a still image?

You can customize the shape, size, and position of a button in any menu but not drop zones unfortunately. In order to do this you'd need to modify the app itself. Most iLife users aren't up to such a task.
Might be easier to simply start with DvdSP (part of Apple's FCS 2). As complicated as DVDSP is, I believe it may be easier to learn apple's pro apps, as opposed to the actual hack for such modifications within iDvd.
http://macdvdpro.digitalmedianet.com/

I've moved some images and i didn't do it in PSE and now PSE can't find them. How do i correct this

I've moved some images on my computer and didn't do it in PSE. Now PSE can't find the images i moved. How can i fix this?

File>reconnect, and then help the organizer out by pointing it to where you moved them.

Moving Master Images after Facebook Upload

I'm using a fully updated version of Aperture 3 and ran into a problem today moving master images that I have not experienced before. My normal workflow is to batch import images from my camera every few days in one large import, so I often have multiple subjects in every batch. For my 9 months with the program I have always downloaded everything into a temporary holding project I literally call "Hold". When I get the time to do a detailed review, I then delete what I don't want and move (drag) the master images I want to keep from "Hold" into other subject-matter-unique projects across the library. This works for me and has worked flawlessly until today when I downloaded about 20 images. What I did differently today was I took things out of my usual order and decided to quickly upload 3 of the images from the "Hold" folder to Facebook using the Aperture Uploader. The upload went fine, as it has in the past, but the problem surfaced when I then tried to move all the master images out of "Hold" to my permanent library file (project) structure. The 17 images (which were not uploaded to Facebook) moved out to their new projects just fine, as always, but the 3 masters which were the source for the Facebook upload will not allow themselves to be moved out of "Hold". When I drag them to the intended project, Aperture copies them into that project, but the original stays in "Hold." Of course, if I try to then delete what is in "Hold" (with a copy safely filed away elsewhere in the Library) I get the warning that I am attempting to delete a master upon which other versions are dependent (to include "Facebook albums" it says), and all will be deleted.
My take on this is the Facebook upload from "Hold", and the resulting versions created in the Facebook album (far bottom entries on the Library listing), now make "Hold" a permanent home for those associated master images. Is there some way to get around this and actually move the master images to where I want them to be AND to de-clutter the "Hold" folder? Or does this mean any use of Aperture's very handy (at least to date) Facebook uploader permanently glues a master to whatever project it was in when it was uploaded, never to fully and completely move again? Thanks.

I just made a test of this, and can confirm the apparent behavior. However, I examined the Masters folder in the Package of the Library (and I have a Managed Library) and I believe there may be some referencing between Projects taking place. The same appears to result where you have created a slideshow. In the Facebook album and in the Slideshow album, the file info reports the master file name -- in my case the xxxx.NEF file, which clearly none of them really are, but rather some version.
I will try to do a more precise test where I can measure the size of the Masters folder to see if the "Move" adds to its size by an amount equal to the size of the Master file.
Interesting!
Ernie
Message was edited by: Ernie Stamper

Hyperlink Images in IBA

Is there any way to hyperlink images in IBA? Currently we can only link text which is very frustrating when trying to promote other related titles using IBA linking to the iBookstore.
We have developed a work around...You create a text box over the image you want to link and you then fill it with whatever text, hyperlink the text and then make the text's opacity 0% making sure that the text is on top of the image.
This is a frustrating work around. I'm hoping for an update in IBA 3.0.

That the standard method to link to an image in iBA.
As always, tho, feel free to use the 'Provide iBooks Author Feedback' menu item for features you'd like added in the future, etc.
http://www.apple.com/feedback/ibooks-author.html

Moving an image between chapters

I have having difficulty moving an image from one chapter to another in iBooks Author. I can't drag it beyond its own chapter and I can't copy and paste it as nothing is pasted. Any ideas anyone?

Have you tried simply using the original image to create the other placements instead...repeating the original process instead of c/p....?

HELP! moved "all images" to trash by mistake. They are still there but I can't undo. How can i return photos to iphoto? Thx!

HELP! moved "all images" to trash by mistake. They are still there but I can't undo. How can i return photos to iphoto? Thx!

Thanks but I have no "Put Back" option when right-clicking. When I attempt to open a photo in iPhoto I receive a white exclamation point on a black background. I have restarted my PC since first encountering this problem but have not emptied trash though i appear to be out of memory. Also, iphoto library shows size as 17GB however, each photo shows 0KB. When i attempt to open a photo i receive message "Item <photo filename> is used by Mac OS X and cannot be opened." I can see the images when scrolling in iPhoto but they disappear when the screen is still. THANKS!

Tapping on a hyperlinked image on iPhone email

Hyperlinked image was created in Outlook 2010. If I click on the image in Outlook 2010 it goes directly to the desired site, if I tap on the image on my iPad it goes directly to the desired site, but if I tap on the image on my iPhone it asks me if I want to Save Image or Copy instead of going directly to the desired site. Is there anyway that I can get the iPhone to go directly to the site?

It's do able - but there are cons
You can place an image into a "Pan and Zoom" Overlay - make that full screen and stick it in a Multistate object with a tumbnail, then place an invisible button over the thumbnail
This is a work around, and if you place the invisible button on the thumbnail, it will still be active when "Pan and Zoom" is initiated so you'll have to have a play regarding user experience!
Hope this helps
Tim

Is there a way of moving imported images in lR4 from mac HDD to and EX HDD with out loosing LR4 data

Hi
i've managed to fill my mack up with images as i imported all my photos to the MAC HDD rather than an external HDD,,,school boy error :\ (but i am new to lightroom)
as there's 30,000+ is there a way of moving them with out having to reload them to the new HDD? i only found out my mistake when the computer was running on 1% memory...doh!
Thanks for any advice
Andy

In your operating system, move the photos to wherever you want them to be (keeping the folder tree structure the same), and then in Lightroom re-link via http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

Moving an image does not work correctly

I have Photoshop CS4, version 11.0.2, installed on a 64-bit Windows 7 system. I am attempting to complete an exercise which requires me to move one image on top of another. I do not recevie an error messge. The function simply fails.
All software is up to date. I have 4 gigs of RAM. Lots of free disk space. My video card is an Nvidia GTX 460 (1 gig).
I have the two images open side by side. I select the move tool. I click and attempt to drag one image on top of theother. Rather than moving on top of the otehr image, the selected image moves behind the other image. That is, the selected half of the window moves behind the other half of the window.
The exercise calls for holding down the shift key when I do the move. If I hold down the shift key, the two images move right or left in tandem. That is, they simlutaneously slide to the dege of their window and stop.
It feels like I have something set wrong somewhere.

Usually when moving layers between images, one would use the move tool
(click on the image in the document window and drag to the other document)
and hold the shift key down if you want the layer pin registered (aligned and
the images are of the same dimensions) and if the images are of different
dimensions, holding down the shift key centers the new layer.
Added:
MTSTUNER
Message was edited by: MTSTUNER

Moving hyperlinked images

Similar Messages

Maybe you are looking for