Moving images within Book cells?

Is there a way to position images within the book template cells?  Understanding that the cells are fixed is there a way to move an image around within those boundaries?  It appears when I resize an image within the cell it does so uniformly and from the center and is locked there.  Am I missing something?  We should be able to position the image inside the borders.

Hi Jay,
when I do not zoom-to-fill my usual 3:2-ratio images get positioned in the middle of a book cell.
Then I can drag them ad libitum to the right or left within that cell.
When zoomed you can still drag the exact portion shown around within the cell.
But that is the only tiny bit of freedom I have discovered so far, with these non-modifiable templates of LR4b#1.
Cell padding is uniformly from each end.
I just hope that general feedback had been drastic enough so that Adobe will soon release LR4b#2 with modifiable templates / page sizes / cell sizes / image borders / text boxes etc.
Otherwise they might not receive much more feedback about the book module. I won't cash out for a book design that does not suit me, so no experiences with upload/export and the rest.
Cornelia

Similar Messages

  • Moving images within a collection?

    Having just watched Julieanne K's tutorial re making a Blurb book, she began with her images in a story order.  How does one move images within a collection to an order different from how they were uploaded or taken?  I guess it is simple, but I cannot seem to do it.

    Actually, you don't have to select User Order.  In Library mode, view the grid and simply drag and drop the thumbnails into the order you want, and that prompt will automatically change to User Order from whatever order it was in before. 
    John

  • Moving images in book 'boxes' - please help!

    OK, here is what I've done.
    I've created a special occasion book. Created a number of pages and layouts and dragged and dropped the images I want into each box.
    I've allowed Aperture to 'scale to fit' each photograph, as I want them to fill the full size of the box. However, some photographs have scaled and I've lost the top of peoples heads, etc. The scale across is fine as the image fills the box nicely, however what I want to ideally do, is to be able to move the image within the box down slightly so that I regain the top of lost heads!
    Please can you let me know if this is possible and if so, how I do it?
    If not possible, is there another way to simply drag and drop images so that they fill the full box size?
    Many thanks if you are able to help.

    Click on the image.
    Double click to bring up the Image Scale slider. Change the scale if you like.
    Put the cursor on the image (changes to a hand) and clic-drag to move.
    Click outside the image to remove the Inage Scale slider.
    It's not very obvious at all. Double-click to resize????
    iMac G5 rev B   Mac OS X (10.4.7)   Twenty Aperture articles at http://homepage.mac.com/bagelturf/

  • Moving images within Grid View in LR3beta2

    Frustrated. In LR3Beta1 I could manually move and place images within Grid View or from the slide view at bottom for purposes of sorting "similar subject" content within a specified Text/Attribute naming. All of this was accomplished from the Parent folder, with no need for drilling down the Tree.
    Now, since installing LR3Beta2 I can no longer manually move (sort) within Grid View...unless I am in the lower most folder of the tree. This change is not practical since a tree folder may not match the relevance of my specified Text/Attributes.
    Can anyone tell me what I may be doing wrong, or is the ability to manually sort from Parent folder no longer an option?

    Here's an example of how I catalog/label/sort my images...
    Architectural images project - 3 locations of shootng, 4 areas of focus: Doors, Windows, Facades, Walls
    So, I may have 20 images w/both a door and a facade in the shot, 20 images with a window and a door, etc. I prefer to Keyword all of the images as Architectural, and then Keyword those applicable to Doors, Windows, Facades, Walls, etc.
    Now, suppose those all go into a folder labeled Architecture.
    The next week I get an assignment for Urban settings. It may include shops, churches, etc. However, within those, I decide to Keyword (where appropriate) Doors, Windows, Churches, Shops, etc. That project goes into a folder labeled Urban Settings.
    Now, let's say I have a request specifically for "Doors". Now, those Doors are spread across multiple folders at this point so I have no opportunity to manually sort all of the doors my similar content if they fall into multiple folders. Doesn't matter that I have pulled up Doors through Text, I still cannot sort them by similar style, shape, color, etc since they are spread across multiple folders.
    In the 1st beta, I could slice and dice a hundred ways to arrive at a final view and then...sort those so that they always appeared that way whenever I called them up again. Didn't matter that they were in multiple folders. That was extremely useful and...sweet.
    Any ideas?

  • Moving images within a catalogue

    I've noticed a phenomenon where, when re-ordering a group of images within a catalogue, LR2 (and 2.2) moves the last photo in the group to the front of the group. It's very time consuming to fix.
    Is anyone else having the same problem?
    Cheers
    Kevin

    That's the problem...
    I actually *want* to put them in custom order (it happens sometimes that the cameras which shoot a wedding are out of time sync). It's when I do this that the problem occurs. Never happened pre Version 2.
    Thanks for the suggestion, tho!
    Kevin

  • Moving images within projects - random placement

    I have tried to move images within a project, slotting them in a different order than shot. All of a sudden the images are not going where directed - they appear to be placed at random within the project. This is driving me crazy now.
    Has anyone else experienced this? Retarting doesn't seem to help. Maybe I need to shut down....

    Thanks for your reply. I guess I mistakenly thought that if you created an album within a project, any images placed in the album would also become part of the project. So what's the best way to sub-divide or categorize images within a project? For example, if I have a project called "architecture" and within that project I have images of "commercial" and "residential".
    I thought if I had a project called "architecture" and inside that I put two albums called "commercial" and "residential", I could drag groups of images into the albums and still see all images by viewing the project.
    Thanks again,
    Andrew

  • Moving images within HTML

    Hi there everyone,
    I'm rather new to Java and I'm trying to get an image in a topframe to move when i resize the browser to the right (the image must shift then to the right).
    Any help would be great.
    Greetz,
    Demigod

    if you're using html, then when you place the image make it spaced from the right, or define location with percentage of screen.

  • Lr3.5 windows_7 64bit: Problem moving images in Library collections

    I am ruhnning Windows &7 Pro, 64 bit and I'm experiencing inconsistant behavior in Lightroom 3.5 with regard to moving images within collections.  When I try to move an image, to place it in the order inwhich I would like view the sequence, the image is placed at the end of the sequence no matter where I place it initially.  I've tried the filmstrip view and the grid view and it happens in both.  I recall doing this without problems previously however it was in the imported Library not a collection, but why would this be different??  One still needs to reorder images in collections.  I've made certian to change the "sort" option to user each time I've tried to do this.  Any Ideas?  Thanks

    'User order' has some surprises. When it works it can be difficult to appreciate what differs from when it doesn't. Julianne Kost video is a good starting point on what will and won't work with a little on why  http://tv.adobe.com/watch/the-complete-picture-with-julieanne-kost/custom-sort-orders/  . If collections and several folders are involved the work round to meet your goals may include a combination of moves, copies and renaming files (export and re-import even) to create an alphanumeric sort. The 'dumping' at the end of the sequence manifests itself in other situations related to the order status in force at the point when you start moving files.  See http://forums.adobe.com/message/4026355#4026355 which came down to making sure the sort starting point is appropriate 
    Good luck 

  • APO DP Planning book cell entry or exit - macro way to validate business rules

    Dear All,
    We have requirement from business that Demand planner will key in forecast in respective KF, when comes out of one cell and go to another cell to enter forecast, we have to validate the cell value with 3 months average and if it is deviated certain percent we need to highlight with different color.
    Note: Planner do not want to enter/save in between moving between planning book cells.
    For example: 3 months average is 100. Planner wants to enter forecast in cells continuously for next 12 months without hitting Enter key or save. I want to compare the cell value with average and if its deviated beyond certain level we need to highlight the cell with different color.
    I know that we have macro events will work when we hit enter key or save or exit or level change.
    I am not sure this is possible, wanted to know any other way possible.
    Thanks in advance.
    Please share your thoughts.
    Sreeni

    This will be quite difficult to achieve because the planning books are designed so that macros execute after you press enter.  There are 3 possibilities that I see
    1 - If you allowed the planner to make all their inputs into the required key figure and then press enter, you could easily design a macro to read each cell in the input key figure and compare it to the 3 months average of another key figure then highlight the input cell accordingly using the CELL_BG() functionality as described above.  
    2 - Alternately you could create a dynamic alert on the input key figure using much the same logic but again these will not generate until enter is pressed.
    3 - Another option is to create a macro that asks the user to enter data into a pop-up box which is read into a layout variable.  This macro could be triggered from a push button.  You could then do the comparison between the value in the layout variable and the 3 months moving average for that particular time bucket and present an error message if it is outside the tolerances that you set.  Such a macro could run for all time buckets or for a range of time buckets that the user highlights.  Your user will still have to press enter however.  The use of some of the macro operators is below:
    Overall I think you have to go with option 1 or 2 and generate the alerts at the end of user input
    Hope this helps
    Laurence

  • Moving a selection of images within a folder

    I would like to move a selection of images within the same folder. I have done this before with a drag and drop but it doesn't want to work today. Anyone have a suggestion. I have and keywords for filters but wanted to set up in time/day order using 2 different cameras.
    thanks, Jan

    fotobuffflorida wrote:...  but wanted to set up in time/day order using 2 different cameras. 
    The easier way to do this, instead of moving photos around manually, is to adjust the time on one of the cameras, and voila, your photos are in order.
    Select the desired photos and then choose Photo->Edit Capture Time, and insert the proper time adjustment between the two cameras.

  • 2 questions - change image size within print cell, and saving print template w/ specific images

    Hi,
    Searched the forums for the answer to these but couldn't find much.
    1. Is there a way to change the image size within a cell (under print module). For example, zoom in 140% on a a specific image but still have it within the original cell size?
    2. Say I create and fill in an elaborate print template with my images - is there a way to save the FILLED IN version of the template to edit at a later time? For example if I wanted to load it back up w/ all the original images layed out in the print template, but maybe change a few and resave as jpeg?
    Thank you!

    Hi
    I'm not sure but maybe you can use a rectangle to hold the .ai image, resize the rectangle and fit proportionally the image inside it
    hope this help
    Eli

  • How do I move a photo within a cell? (montage)

    Hello there.
    I am trying to create a photo montage. I have all my photos in cells on the page, but now I am trying to zoom in on and move photos around within each cell (sort of what you do when you upload a photo in Facebook). This was quite easy for me to do in Aperture, but I can't seem to find out how to do it in Lightroom. What am I missing?
    Thanks!
    Barb

    Hi Barb
    It’s easiest to use the print module. If you choose Custom package from the Layout tab (top right) you will get a blank canvas. You can then drag and drop as many images as you wish from the film strip. Each image will show a bounding box and you can drag the corner handles to re-size. You can click in the center of each photo to move it. You can drag around the canvas and even overlap images if required. When your montage is complete you can print to file as a single jpeg.
    You can also use the book module, where there are many page templates. The cells for book pages are fixed but you can drag images around within the cells. Book pages can be saved as PDF or jpeg.

  • Sorting of images within a stack

    When working with stacks some strange things happen:
    - When trying to duplicate one image out of the stack into an album the whole stack is moved to the album. When I than delete this stack in the album the order of the images of the same stack in my projects is changed.
    - When rejecting images within a stack my rejected images are not automatically moved to the rejected images folder. Instead these images stay in the stack even so they are marked as rejected.
    - When sorting images within a stack by using different ratings and than trying to limit the image view by showing for instance only images with 3 stars or more nothing happens. Also showing rejected images only does not work within a stack. Instead showing images by rating is applied to the whole project and not only the stack
    Do I do something wrong or is this a known apperture bug?
    MBP   Mac OS X (10.4.9)  

    David, your understanding (use) of stacks is causing a conflict. The whole idea is basically to group a series of similar images and choose the best one of that series, called the Pick. Then, within that series you can rank those images in an order of Pick to next best, and so on. You can view stacks open or closed - when closed, the Pick is the one on top.
    Here's some info from the Help Menu that will help answer your questions:
    Note: When you place a stack in a book album or web gallery or web journal album, Aperture displays the stack pick. If you drag a stacked image that is not the stack pick into the book or web gallery or web journal album, Aperture reminds you to select the stack pick. If you don’t want to place the pick in the album, but want to use a different version from within the stack, select the version you want and then make it the album pick by choosing Stacks > Set Album Pick.
    Dragging Stacks
    You can drag an entire stack to a new location, and you can drag specific images within a stack to a new location. When a stack is closed, dragging the stack moves the entire stack. When a stack is open, you can drag individual versions to new locations in the Browser. You can also drag images into a stack. If you drag a stacked image into a different project, however, the entire stack moves to the new location.
    If you still want to be able to use a stacked image as you have stated, then take that image out of the stack, split the stack, or create a version of the image and remove it from the stack.
    Take a quick refresher through the help menu - it will give you some further details and ideas so you can accomplish exactly what you need to do.
    Hope that helps!!

  • Moving images from iPhoto 11 to Photoshop Elements Organizer

    I understand that iPhoto 11 kept all images within the iPhoto Library.  In order to move them into the Adobe Photoshop Elements Organizer, they must be moved to the hard drive of the Mac and then imported into Elements 12 Organizer.
    Is there any way to do this in one step?
    Mary Lou

    If you want to keep the photos organized by the Events they are currently in use this export setup:
    If you want to keep the keywords, titles and descriptions added in iPhoto change Kind to JPEG and set JPEG Quality to Maximum and check both checkboxes.
    OT

  • Moving images to a new HD?

    I'm not where I can test it right now, but will shortly need to move about 10k images that were previously imported into LR from one HD to another.
    Will I be able to just point Lightroom to this new drive where images were moved to (preserving the directory structure & images therein), but the drive letter is different?

    Roger,
    I just did this operation yesterday. I bought a larger HD, dragged the images in their folders to the new HD, then disconnected the old HD.
    I then started LR. All the thumbnails had "?" on them. This is how I got things back in order:
    1. I selected a folder of images.
    2. I selected all the thumbnails from that folder.
    3. I clicked the "?" icon on the first thumbnail.
    4. In the resulting dialog box, I clicked "OK" to find the image.
    5. I migrated to the image within it's new folder via the dialog, and clicked the go button.
    6. LR then proceeded to reconnect to every photo in that folder.
    7. I repeated steps 1 thru 6 for each folder of images.
    LR kept the name of each folder, but tagged the end of the name w/the name of the new HD, which I don't want. I double-clicked each folder and took off that extra name suffix.
    There may be another way to do this, but this one worked for me.
    good luck,
    jeff

Maybe you are looking for