Moving img in FormsCentral

I try to move an imported immage in FormsCentral, but every time i try to move it, using the requestes switch plate, the immage gets "hit back" to its position before, even if the programm first lets me moving the immage. I really don't understand anything. Hope u can help me. Greets from Germany

Hi;
You can change the name of the column, it will not effect the data, new data will still come into that field. The field and it's corresponding column in the reponse table will remain "connected".
Thanks,
Josh

Similar Messages

IMG 1.9 release notes and discussion thread

As you probably already know, IMG 1.9 is starting to roll out. FiOS TV's Joe Ambeault posted release notes that may just answer quite a few of your questions. (And here's a link to the press release as well.)
I see that several of you have already started posting about IMG 1.9. Great! We'd love to have a central place to refer people, so we'll be moving IMG posts over to FiOS TV Technical Assistance. That way things are together and you won't have to search as much to find what you're looking for.
Please feel free to post here with your observations, feedback and questions. I'm sure others will chime in to help with questions if they've already run across the answers you're looking for. And it'll save duplicated efforts as well.

The new graphics are on ALL the 7xxx series boxes. Not supported on the 6xxx series.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

How can I use adobe forms to force payment (with PayPal) to ensure payment before registration? Or is this an issue with PayPal?

I am using adobe forms to create a registration form for a workshop that I am holding. It is a $10 charge to attend however I am having difficulties ensuring the payment goes through before the participant is put on the registration list. Is this something I can fix through adobe forms or should I be going through PayPal to fix the issue?

[moving discussion to FormsCentral forum]

Moving and properly placing fields in a FormsCentral form

I've just started using this software that came with Acrobat XI and began designing a form from scratch. Moving and placing fields in your desired location seems to be quite challenging unless there is something I do not understand about the process. The primary annoyance is when using the left side handle to change the width of a field, all other fields above appear to be connected and all change widths together. Also, moving a field along a horizontal plane always ha sthat field snap back to its original position. Any help here?

All th fields in the first column in FormsCentral share the same label width. You might want to try to put the label on top if you don't like this behavior.
If you insert fields on the right on a form element then you can independently set its label width.
You can only put a form element next to another one. If you want more horizontal "spacing" between element you can resize it by increasing the previous element width. In the image below you can see what you need to "drag"to increase spacing.
Hope this helps
Gen

Just installed Lion on 2009 MacBook Pro moved from Snow Leopard - img. copies of movies will not play on DVD player

I have a MacBook Pro 2009. In order to get iCloud I have moved to Lion. Mountain Lion will slow machine too much. I now find that DVD player will not play the Disc Image .img movie files. When I open DVD player and click File and Open DVD Media, the Disc Image files are greyed out. The .dvdproj files are not greyed but if I click on them I get a message that "the media type is not supported". I could play the movies without any problem before I switched to Lion. The switch was done at the Apple store by an Apple Technician. Any idea what is happening?

Download and install VLC. http://www.videolan.org/vlc/index.html and get rid of DivX.

Failed boot after moving hard drive (IDE not SATA)

Greetings all.
I am attempting to setup a headless box, and in doing so I am installing Arch on one system (Sapphire Axion A3-M275 Motherboard), then moving the hard drive to the new system (SGS1660, a VIA CLE266/VT8235 based headless rack-solution). After moving the drive into the SGS1660, the system fails to boot. Attached output from the Serial Console:
Booting 'Arch Linux'
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /vmlinuz26 root=/dev/disk/by-uuid/93df0562-c6e6-4583-9a79-51cd2091247b r
o console=ttyS0,115200
[Linux-bzImage, setup=0x3600, size=0x1ad6d0]
initrd /kernel26.img
[Linux-initrd @ 0x2ff21000, 0x9e7a5 bytes]
Linux version 2.6.30-ARCH (root@T-POWA-LX) (gcc version 4.4.0 20090630 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jul 20 11:20:32 UTC 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002ffd0000 (usable)
BIOS-e820: 000000002ffd0000 - 000000002ffde000 (ACPI data)
BIOS-e820: 000000002ffde000 - 0000000030000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
DMI 2.3 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
last_pfn = 0x2ffd0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009fc00 (usable)
modified: 000000000009fc00 - 00000000000a0000 (reserved)
modified: 00000000000e0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000002ffd0000 (usable)
modified: 000000002ffd0000 - 000000002ffde000 (ACPI data)
modified: 000000002ffde000 - 0000000030000000 (ACPI NVS)
modified: 00000000fec00000 - 00000000fec01000 (reserved)
modified: 00000000ff780000 - 0000000100000000 (reserved)
init_memory_mapping: 0000000000000000-000000002ffd0000
RAMDISK: 2ff21000 - 2ffbf7a5
ACPI: RSDP 000f6ad0 00014 (v00 ACPIAM)
ACPI: RSDT 2ffd0000 0002C (v01 A M I OEMRSDT 09000521 MSFT 00000097)
ACPI: FACP 2ffd0200 00084 (v02 A M I OEMFACP 09000521 MSFT 00000097)
ACPI: DSDT 2ffd0390 03270 (v01 MiniV MiniV080 00000080 INTL 02002026)
ACPI: FACS 2ffde000 00040
ACPI: OEMB 2ffde040 00046 (v01 A M I AMI_OEM 09000521 MSFT 00000097)
0MB HIGHMEM available.
767MB LOWMEM available.
mapped low ram: 0 - 2ffd0000
low ram: 0 - 2ffd0000
node 0 low ram: 00000000 - 2ffd0000
node 0 bootmap 00011000 - 00016ffc
(9 early reservations) ==> bootmem [0000000000 - 002ffd0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 0000626e44] TEXT DATA BSS ==> [0000100000 - 0000626e44]
#4 [002ff21000 - 002ffbf7a5] RAMDISK ==> [002ff21000 - 002ffbf7a5]
#5 [0000099c00 - 0000100000] BIOS reserved ==> [0000099c00 - 0000100000]
#6 [0000627000 - 0000629230] BRK ==> [0000627000 - 0000629230]
#7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
#8 [0000011000 - 0000017000] BOOTMAP ==> [0000011000 - 0000017000]
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x0002ffd0
HighMem 0x0002ffd0 -> 0x0002ffd0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0002ffd0
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
SMP: Allowing 1 CPUs, 0 hotplug CPUs
No local APIC present or hardware disabled
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 11 pages at c1606000, static data 24444 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194911
Kernel command line: root=/dev/disk/by-uuid/93df0562-c6e6-4583-9a79-51cd2091247b ro console=ttyS0,115200
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
NR_IRQS:512
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 1326.894 MHz processor.
Console: colour dummy device 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing HighMem for node 0 (00000000:00000000)
Memory: 772708k/786240k available (2905k kernel code, 12976k reserved, 1052k data, 392k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf07d0000 - 0xff7fe000 ( 240 MB)
lowmem : 0xc0000000 - 0xeffd0000 ( 767 MB)
.init : 0xc04e3000 - 0xc0545000 ( 392 kB)
.data : 0xc03d647f - 0xc04dd6a8 (1052 kB)
.text : 0xc0100000 - 0xc03d647f (2905 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 2654.36 BogoMIPS (lpj=4422980)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
CPU: L2 Cache: 64K (32 bytes/line)
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 10k freed
ACPI: Core revision 20090320
ACPI: setting ELCR to 0200 (from 8c20)
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (2654.36 BogoMIPS).
net_namespace: 1056 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: PME# disabled
pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.1: PME# disabled
pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.2: PME# disabled
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:11.0: quirk: region 0800-087f claimed by vt8235 PM
pci 0000:00:11.0: quirk: region 0400-040f claimed by vt8235 SMB
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:05: ioport range 0xe900-0xe90f has been reserved
system 00:05: ioport range 0xea00-0xea0f has been reserved
system 00:05: ioport range 0xeb00-0xeb2f has been reserved
system 00:05: ioport range 0xec00-0xec7f has been reserved
system 00:05: ioport range 0xe800-0xe83f has been reserved
system 00:07: ioport range 0x3e0-0x3e7 has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0x800-0x87f has been reserved
system 00:07: ioport range 0x400-0x41f could not be reserved
system 00:09: iomem range 0x0-0x9ffff could not be reserved
system 00:09: iomem range 0xe0000-0xfffff could not be reserved
system 00:09: iomem range 0x100000-0x2fffffff could not be reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: disabled
pci 0000:00:01.0: MEM window: 0xddd00000-0xdfdfffff
pci 0000:00:01.0: PREFETCH window: 0x000000d5c00000-0x000000ddbfffff
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs...
Freeing initrd memory: 633k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1248948860.509:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1510
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:01.0: disabling DAC on VIA PCI bridge
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 392k freed
:: Loading Initramfs
:: Running Hook [udev]
:: Loading udev...SCSI subsystem initialized
pata_acpi 0000:00:11.1: can't derive routing for PCI INT A
pata_acpi 0000:00:11.1: can't derive routing for PCI INT A
done.
Waiting 10 seconds for device /dev/disk/by-uuid/93df0562-c6e6-4583-9a79-51cd2091247b ...
Root device '/dev/disk/by-uuid/93df0562-c6e6-4583-9a79-51cd2091247b' doesn't exist, attempting to create it
ERROR: Failed to parse block device ids for '/dev/disk/by-uuid/93df0562-c6e6-4583-9a79-51cd2091247b'
ERROR: Unable to detect or create root device '/dev/disk/by-uuid/93df0562-c6e6-4583-9a79-51cd2091247b'
You are being dropped to a recovery shell
Type 'reboot' to reboot
Type 'exit' to try and continue booting
NOTE: klibc contains no 'ls' binary, use 'echo *' instead
If the device '/dev/disk/by-uuid/93df0562-c6e6-4583-9a79-51cd2091247b' gets created while you are here,
try adding 'rootdelay=10' or higher to the kernel command-line
ramfs$
I think what is happening is that the kernel does not have the drivers for the IDE controller on the board for the CLE266/VT8235. Does this seem accurrate? And if so, how can I verify the current kernel config, then compile a kernel with everything else Arch needs to boot properly? I am familiar with the old means of setting up a kernel using the 'make menuconfig; make; make modules_install' etc method.
Thanks for the help in advance!

Hi, not sure if this is still causing you an issue, but I just ran into the same problem.
For me, I have a Sharp PC=MM1110 which has no cd drive and doesn't like to boot from USB. To get Arch installed on it, I had to attach it to another PC (via it's docking cradle, which lets it show up as a USB hard drive), then boot the other PC from an Arch install cd and select the USB hdd for all of the partitioning etc.
When I rebooted after the installation, the Sharp wouldn't boot.
First, I had to edit the grub menu entry to point to (hd0,0), at which point I got the error listed in the first post... Failed to parse block device id's.
If i booted into fallback mode, it booted without a problem.
For me, the solution to finally get it working was to boot into fallback mode, remount the filesystem as r/w, and run mkinitcpio -g filename to rebuild the kernel. Once completed all I had to do was point grub to the new kernel image and it booted ok.
Hope this is useful to someone

[CLOSED + MOVED]Activate lvm2 on ext3 root partition

Hello guys,
I want to move to lvm2 on my arch installation, I haven't used any lvm before. So here's what I did so far:
1. shrink root partition using gparted to 7 gigabytes
2. created an lvm partition with size 8 gigabytes
3. migrated all files from the root partition to the lvm partition (in single user mode: # rsync -axSX / /newpartition)
4. added lvm2 hook before the filesystems hook in /etc/mkinitcpio.conf according to http://wiki.archlinux.org/index.php/Con … #Using_lvm
5. regenerated the initramfs image using # sudo mkinitcpio -g /boot/kernel26.img
5a. added a grub entry with root=/dev/vg/root (I have no idea what the difference is between that and /dev/mapper/vg-root)
5b. edited /etc/fstab to use /dev/vg/root (again, no idea if /dev/mapper/vg-root would have been more appropriate) as root mountpoint "/"
6. Rebooted
7. Unfortunately, I cannot copy-paste the output, but upon reboot, the initramfs loads fine, it seems to recognize to lvm2 volume, but then says "trying to open console - not found" or something like that and then kernel panics on me.
Any ideas?
thanks!
CLOSED+MOVED:Moving this question elsewhere, as this topic seems too advanced for this subgroup.
Last edited by awayand (2010-01-13 12:44:11)

I used reiserfs for many years, many partitions, many distros and had no problems. Every now and then I'd use ext3 but there were a few issues. I got a new laptop in January and decided to take the plunge: shrunk vista, small ext2 /boot and the rest set up as an encrypted partition with LVM2, all logical volumes set up as ext4 (except swap!). I've been very impressed with ext4 stability.
Oh, and step (5) edit fstab to reflect the new file systems, make sure /etc/mtab doesn't exist.

Writing ftp install img to USB and booting

Hello,
New user here. Have been messing around with Arch in a VM and now want to try a true hdd install. I don't have an optical drive so I'm trying to go the USB route.
The computer does allow booting from USB but I am having trouble in this case.
I have tried unetbootin and it completes writing to the stick without a hitch. However, upon boot, a black screen is displayed with the word "boot:" and a flashing cursor. It does not have the normal Arch grub menu. I can't figure out where to go from there. I believe this is not the correct behavior because I tried unetbootin w/ backtrack 3 as well and it booted right into the correct menu. (Used the standard FTP iso for this, the application could not find an iso based on the drop downs so I pointed to it using the "ISO" method.)
Secondly, I tried the method listed in the Arch guide's using dd .
sean@david-u:~/Downloads$ sudo dd bs=8M if=archlinux-2009.08-netinstall-x86_64.img of=/dev/sdf
23+1 records in
23+1 records out
195641856 bytes (196 MB) copied, 50.1885 s, 3.9 MB/s
Using this method, upon boot, at POST, before the system gets to the boot devices, it hangs hard. Nothing but a hard restart brings it out. My downloaded img md5sum matches the md5sums.txt, however I cannot verify that the written md5sum matches the image file as I'm not sure how to capture the fact that dd says it wrote 23+1 records. See below:
sean@david-u:~/Downloads$ sudo dd if=/dev/sdf count=23 status=noxfer | md5sum
23+0 records in
23+0 records out
21915d144f3b0c05d7d72c6cad297353 -
sean@david-u:~/Downloads$ sudo dd if=/dev/sdf count=24 status=noxfer | md5sum
24+0 records in
24+0 records out
9923f522012aff9182b708db23197988 -
sean@david-u:~/Downloads$ sudo dd if=/dev/sdf count=23+1 status=noxfer | md5sum
dd: invalid number `23+1'
d41d8cd98f00b204e9800998ecf8427e -
sean@david-u:~/Downloads$ cat archlinux-2009.08-netinstall-x86_64.img | md5sum
64cdedf65f5da1b1ca584fe12a892ca1 -
Thirdly, I tried creating one per http://wiki.debian.org/BootUsb however it seems that the paths to some files are different. This method gets me the furthest. The Arch grub menu displays but if I type 'arch' to start the kernel loading it reports that it cannot find '/boot/vmlinuz26' I tried all sorts of things, moving around the files, but couldn't get it to find the kernel.
Fourthly, I tried the Gujin method but when i try to 'cat archlinux-2009.08-netinstall-x86_64-isolinux.iso > /dev/sdf5' it gives me permission denied regardless of whether it's mounted or not or if im running as root or not.
Suffice it to say, I'm getting frustrated here as I probably don't understand some of these things as much as I should. Anyone have any similar experiences/solutions they can share?

I think the poster wants a USB from which to boot and install from. I do this all the time like this-
Format USB (I use fat, not sure it matters since dd overwrites anyhow) Make sure to flag as boot partition.
Plug in USB stick again and do a dmesg in terminal to find the /dev/sd?? assigned.
As root -
dd if=<enter .img file here> of=/dev/sd??
For example -
sudo dd if=archlinux-2009.08-netinstall-x86_64.img of=/dev/sdf
Works for me every time. It sounds as if your USB is not flagged bootable.

The footer is moving to the left and no longer centered. It is like it is no longer in the container

The footer is moving to the left and no longer centered. It is like it is no longer in the container. I don't see the container outline any longer. This same thing is happening in two different websites. Can you tell me what I am doing wrong?
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Dragonfly Toy Puppies Home Page</title>
<style type="text/css">

</style>
<script src="../SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<link href="../SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
</head>
<body class="twoColFixLtHdr">
<div id="container">
<div id="header">
</div>
<ul id="MenuBar1" class="MenuBarHorizontal">
      <li><a href="#">Home</a>      </li>
      <li><a href="#">Services</a></li>
      <li><a href="#" class="MenuBarItemSubmenu">Sires & Dams</a>
        <ul>
          <li><a href="#">Toy Poodles</a></li>
          <li><a href="#">Maltese</a></li>
          <li><a href="#">Yorkies</a></li>
          <li><a href="#">Parti Yorkies</a></li>
          <li><a href="#">Mini Dachsunds</a></li>
          <li><a href="#">Maltipoos</a></li>
          <li><a href="#">Morkies</a></li>
        </ul>
      </li>
      <li><a href="#">Puppy Care</a></li>
<li><a href="#">Success Stories</a></li>
<li><a href="#">Contact Us</a>      </li>
</ul>
<div id="sidebar1">
    <h2>Puppies for Sale</h2>
    <p> Click on your Favorite Breed</p>
    <h2><a href="poodle.htm" onmousedown="MM_swapImage('poodle','','Images/poodle_active.jpg',1)"><img src="Images/poodle_link.jpg" alt="Link to Poodle Puppy Page" name="poodle" width="200" height="250" id="poodle" onmouseover="MM_swapImage('poodle','','Images/poodle_hover.jpg',1)" onmouseout="MM_swapImgRestore()" /></a>
      <a href="maltese.htm" onmousedown="MM_swapImage('maltese','','Images/maltese_active.jpg',1)"><img src="Images/maltese_link.jpg" alt="Link to Maltese Puppy Page" name="maltese" width="200" height="200" id="maltese" onmouseover="MM_swapImage('maltese','','Images/maltese_hover.jpg',1)" onmouseout="MM_swapImgRestore()" /></a>
      <a href="yorkie.htm" onmousedown="MM_swapImage('yorkie','','Images/yorkie_active.jpg',1)"><img src="Images/yorkie_link.jpg" alt="Link to Yorkie Puppy Page" name="yorkie" width="200" height="200" id="yorkie" onmouseover="MM_swapImage('yorkie','','Images/yorkie_hover.jpg',1)" onmouseout="MM_swapImgRestore()" /></a>
      <a href="parti_yorkie.htm" onmousedown="MM_swapImage('parti_yorkie','','Images/partiyorkie_active.jpg',1)"><img src="Images/partiyorkie_link.jpg" alt="Link to Parti Yorkie Puppy Page" name="partiyorkie" width="200" height="200" id="partiyorkie" onmouseover="MM_swapImage('partiyorkie','','Images/partiyorkie_hover.jpg',1)" onmouseout="MM_swapImgRestore()" /></a>
      <a href="dachshund.htm" onmousedown="MM_swapImage('dachshund','','Images/dachshund_active.jpg',1)"><img src="Images/dachshund_link.jpg" alt="Link for Mini Dachshund Puppy Page" name="dachshund" width="200" height="200" id="dachshund" onmouseover="MM_swapImage('dachshund','','Images/dachshund_hover.jpg',1)" onmouseout="MM_swapImgRestore()" /></a>
      <a href="maltipoo.htm" onmousedown="MM_swapImage('maltipoo','','Images/maltipoo_active.jpg',1)"><img src="Images/maltipoo_link.jpg" alt="Link for Maltipoo Puppy Page" name="maltipoo" width="200" height="200" id="maltipoo" onmouseover="MM_swapImage('maltipoo','','Images/maltipoo_hover.jpg',1)" onmouseout="MM_swapImgRestore()" /></a>
    <a href="morkie.htm" onmousedown="MM_swapImage('morkie','','Images/morkie_active.jpg',1)"><img src="Images/morkie_link.jpg" alt="Link to Morkie Puppy Page" name="morkie" width="200" height="200" id="morkie" onmouseover="MM_swapImage('morkie','','Images/morkie_hover.jpg',1)" onmouseout="MM_swapImgRestore()" /></a></h2>
</div>
</div>
<div id="mainContent">
    <h1>Welcome </h1>
    <p>This Website is under Construction</p>
    <h2>Check Back Soon</h2>
</div>
    <br class="clearfloat" />
<div id="footer">
    <p>Footer</p>
</div>
</div>
<script type="text/javascript">

</script>
</body>
</html>

You have an extra closing </div> where none is required.
Beggining on line 215 of your code, change this:
</div>
</div>
to this:
</div>
When problems occur, the W3C code validation tools will help you find errors in your code.
Code Validation Tools
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com/

Header photos keep moving

How do i keep the photos in my header from moving down the page when i resize my screen smaller. it also seems to effect the photos when viewed on line. check it out at www.kansasspineinstitute.com i just need the photos to be next to each other. thanks

Comments on your site:
You have a line of code above the <!DOCTYPE on all your pages. Remove that line [ <%@LANGUAGE="JAVASCRIPT" CODEPAGE="65001"%> ]; I think it will throw off the browsers' rendering.
Please optimize your photos when you use them on a webpage. I would have clicked away immediately because they take so long to load at the size (file-wise)that they are now.
It is pretty simple to resize them, right from Dreamweaver. Look in the Property Inspector for an icon that looks like a figure eight falling over. Click your image, then click the Edit Image Settings icon (the falling-over figure 8). Click on the "File" tab, and you will see how huge your images are. Going by the final size in your page, put one of those numbers in and the image will adjust to that size, proportionally. You will need to check the size indicated in the <img src... that calls in the image, to make sure it is the final size you want.
I'm not understanding what you mean about your pictures not being lined up. Please explain.
While you're at it, you should get rid of word-spaces in file names.
Beth

Moving Average Price tolerances for intercompany transfers

We are looking to utilize the tolerance limit settings for GR's to prevent entry mistakes from affecting moving average prices severly. I have sucessfully tested this process by triggering a warning/error message at the time of a goods receipt, but have been unable to trigger a warning/error for intercompany transfers.
Is this configuration in the OMC0 settings, in config, or somewhere else?
Thanks very much for any feedback.
Matt

HI Jurgen,
Thanks for your reply.
1. We have maintained the price control as V
2. You have mentioned "However it is as well possible to enter an external value in the movement (if enabled in customizing). then the movement is valuated with this value and the MAP in material master is adjusted."
Where to checl in IMG for the above ?
3. We did goods issue in the previous period 12/2011 but doing the GR in current period 01/2012. Do we need to maintain MAP for both the periods ?
If you can please tell us what is the standard process to carry out such activity ?
Regards
Sayan

How can I get a parameter back into a servlet invoked from an IMG tag ?

I'm using a servlet to create several graphical plots per JSP i.e. per HTML page. Each graph is supposed to be different, according to a parameter which I want to pass back from my JSP. I'm getting several plots but they're all the same!
I've tried setting an attribute in the session object before each IMG SRC= , but all I get is each plot the same! In fact, my debugging efforts show that the servlet is only called once despite 3 calls, each with a different session parameter value. I'm not sure the session parameter values are getting used properly.
I just can't find a way of getting a parameter back into my servlet which is invoked from the IMG tag (i.e. SRC= "servlet name").
Can anyone tell me the best way to pass a parameter back into a servlet which is invoked from an IMG tag? Can the request object be used? I can't, at the moment, see how it could be used?
I'll certainly be very grateful if anyone can help with this - could even be useful for others as well!

You said that, "by moving a copy of Mobile Docs back to the Library, from which I had moved it, my documents reapperared in Cloud." That says that you actually moved it. Obviously, I can't tell exactly what you did, but it sounds like you may have thought you were just putting it in the sidebar, but you actually put it somewhere else. The sidebar is not a location to put things, just a way to create a quick shortcut to access a file or folder, so you can't put things "back" from there.

Will we still be able to use the Adobe FormsCentral desktop app after FormsCentral retires?

Is it just the online service that is expiring?
Will I be able to create fillable PDF's using the desktop app (not online) to create fillable PDF's?
Thanks!

Hi LeanneW,
Please see this section from the End of support | Adobe FormsCentral document:
You may continue to use the Adobe FormsCentral desktop app for creating PDF forms until you update or upgrade your Acrobat software. But the app will not connect to any online component or offer the ability to collect data or publish web forms. Furthermore, we will not be supporting the application once Adobe FormsCentral is retired in July, and so cannot ensure functionality moving forward.
If you have additional questions, please let us know.
Best,
Sara

In new GL after doing settlement from IO to cctr, value in PCTR not moved?

Hi guyz,
I'm using new GL and activating new Profit Center Accounting, without classical Profit Center Accounting.
When I'm doing settlement from IO (assigned to Profit Center A), to Cost Center (with Profit Center B), I'm suspecting that the value in Profit Center A has already moved to Profit Center B.
When I'm executing report of the Profit Center B in S_PL0_86000028 - Financial Statement: Actual/Actual Comparison , I found that the expense is not there.
I checked again to Profit Center A, and the value is still there!
Why is that?
Is there any solution to provide the movement from Profit Center A to Profit Center B as the settlement done?
Need your answers asap...Thanking you

Hi Osiegbu!
You're right, turns out that I haven't assigned the variant for real-time integration to our company codes.
However, I read in the IMG library on defining the variant that :
"If you use real-time integration, you can deactivate the reconciliation ledger. In this way, the reports that select the data from the reconciliation ledger no longer display any data. Some reports in Cost Element Accounting are affected".
Before I use the variant and assign it, I need to make sure, what are the consequences of not using reconciliation ledger and using real-time integration instead?
I also currently haven't activating any reconciliation ledger, since I assume that because I have activating automatically creation of cost element whenever Profit & Loss new GL accounts are created in FI, it's already reconciliated. Is it correct?
And, what reports in Cost Element Accounting that will be affected?
Need your assistance on those issues, thanking you...

Creating Trendline of 50 Period Moving Average

HI, im trying to plot my graph in LabView and trying to do create a treadline of 50 period moving average like in excel.
is it possible for me to do it in LabView?
i have tried General Polynomial Fit VI and some other VIs in Fittings but cant get anything close to the way i want
any ideas? anyone?
Solved!
Go to Solution.

Charlie, There's a better VI called "Mean PtByPt". Look in the palette "Signal Processing >> Point by Point >> Prob & Stat >> Mean". One added benefit: this VI gives valid data for the first 50 points, even though the mean is not "fully developed" or "stabilized" during the first iterations. (Also, keep in mind that "Delete from Array" and "Build Array" primitives make a call to the memory manager, meaning memory copies for large arrays and fast loop rates will result in a CPU bottleneck. Using circular buffers is one way to mitigate this limitation.)
64864050, try adapting this code to fit your needs:
a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"] {color: black;} a.lia-user-name-link[href="/t5/user/viewprofilepage/user-id/88938"]:after {content: '';} .jrd-sig {height: 80px; overflow: visible;} .jrd-sig-deploy {float:left; opacity:0.2;} .jrd-sig-img {float:right; opacity:0.2;} .jrd-sig-img:hover {opacity:0.8;} .jrd-sig-deploy:hover {opacity:0.8;}

Moving img in FormsCentral

Similar Messages

Maybe you are looking for