Moving installed location of LiveType data
Does this procedure for moving the installed location of LiveType data apply to the LiveType data that is bundled with Final Cut Express HD (version 3.0)? These are the instructions I am questioning -
i http://docs.info.apple.com/article.html?artnum=93297
, because the document's Last Modified Date is a long time ago - Jan 6, 2004)
Related question - in order to uninstall the LiveType data, do I just drag the
i /Library/Application Support/LiveType/LiveType Data
folder to the trash or are there other things I would also have to delete from my system?
Yes it's the same.
Hold the Command key when you drag and you'll move the folder, not copy it.
Similar Messages
-
Install LiveType data button is dimmed and Can I make objects myself?
Is it normal that the Install LiveType Data button is dimmed?
How can I install new textures and object?
And my second question is can I make objects myself?Werner C wrote:
Is it normal that the Install LiveType Data button is dimmed?
Umm, no. but you haven't told us aything about yoru installation procedure. It might be normal for what you're trying to do.
How can I install new textures and object?
Push the install button.
And my second question is can I make objects myself?< </div>
This is your third question. The short answer is yes but it's much more complicated than that. In previous editions of LT, there was an application that allowed you to create your own LiveFonts and other goodies but it's not on the the v3 installation script that I can tell. Your best bet is to figure out why you cannot run the installer properly and fix it.
bogiesan -
I am una
le to sync any music from I tunes. The problem started when I could not download new music because for some reason I moved the location of the music. At least the e/m says I did. I don't remember doing that. I decided to reformat my I pod and now I can sync my old music either, manually or automatically. I was wondering if I can delete all my music from I tunes & start over with new downloads? Will I get charged again?Ok, got new phone and it worked fine..at first. Now I am getting the same error. I also notice that the iphone goes from saying "sync in progress" to back to the home screen with the icons. And then I get the message "could not sync phone - device not connected"
I am getting seriously frustrated. The Apple tech support people have been ZERO help. I have uninstalled and reinstalled Itunes twice. I have even gone so far as doing a CLEAN install of OS X on my IMAC. Now I have the smae problems as before. Anyone have any idea what the problem could be? -
Very simple question, how do you configure windows 8.1 to use a SD card / external drive as the default install location for software applications? Primarily interested in apps installed from the windows store. This should be available in the settings
charm within the windows store. This must have been overlooked in the development of windows 8.1 or is a bug.
Regards, Bill
* update
I've tried modifying this key and the path:
“HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Appx”
http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_store/how-do-you-install-apps-in-windows-8-from-the/c4fbe2a8-fd3d-41c1-b9a6-6f881eed374f
Also tried using symlinks as detailed here:
http://social.technet.microsoft.com/Forums/windows/en-US/8eee52c2-db0f-4032-8c72-7cd999e8b41a/windows-8-apps-installing-to-secondary-drive?forum=w8itprogeneralHere's some links I've used to try to figure this out:
http://social.technet.microsoft.com/Forums/windows/en-US/2dfc0cd9-7d1b-41de-abce-e03fb6a5a383/metro-apps-not-working-in-windows-8-pro-x64-after-moving-users-and-programdata-folders?forum=w8itproinstall
http://social.technet.microsoft.com/Forums/windows/en-US/8eee52c2-db0f-4032-8c72-7cd999e8b41a/windows-8-apps-installing-to-secondary-drive?forum=w8itprogeneral
http://social.technet.microsoft.com/Forums/windows/de-DE/f5e33ac9-beab-4b99-b3ca-7cb5e6f415e4/how-do-you-change-metro-apps-default-install-location?forum=w8itprogeneral
Regards, Bill
The registry method does not work with 8.1. I found this out the hard way. Doing it on 8.1 will leave you reinstalling the OS if you didn't do a SRP beforehand. -
SpotifyWebHelper.exe keeps adding itself to startup, and install location?
Every. Single. Time I try to disable Spotify from coming on when I start my computer back up, SpotifyWebHelper.exe gets re-added into Window (7)'s startup. No matter what setting I use, even if I uninstall and reinstall - it pops back up there. And what's worse, is the exe stays open after I close Spotify.
I don't need or want SpotifyWebHelper.exe, I'm tired of having to rename it, make a blank file with that name, then setting it to read only just to keep it from running. Is there any other way to get around this? I canceled my premium subscription because of crap like this, and the awful support I received in the past. I get that you guys rewrote everything from the ground up (Or at least it seems that way), but come on... Let us disable this crap.
Oh and is there a way to move Spotify's install location? No program should install itself into the AppData folder.1) Yes.
2) Yes although the data on the current RAID set will be deleted.
3) Yes.
4) Yes. -
Is it possible to change the install location during pkgadd
Hi Forum,
I've downloaded several updated applications from sunfreeware.com and would like to install them to /usr/sfw. The package was built to install them to /usr/local. Is there a flag I can use during pkgadd to modify the default install location?
I tried -R /usr/sfw but that sets the "root" location so my install path would end up looking like /usr/sfw/usr/local.
Any ideas?
Cheers,
Timt.jones wrote:
Hi Forum,
I've downloaded several updated applications from sunfreeware.com and would like to install them to /usr/sfw. The package was built to install them to /usr/local. Is there a flag I can use during pkgadd to modify the default install location?No. More to the point, it's very possible that the software won't work properly if moved. For instance a binary might be looking for configuration information in a particular path. It could be trying to open /usr/local/var for logging and /usr/local/etc/ for configuration information.
If the package is very flexible, they can prompt for an install location and do the right thing. But that's not something that is easily forced on packages otherwise.
I tried -R /usr/sfw but that sets the "root" location so my install path would end up looking like /usr/sfw/usr/local.Right. It also updates the package databases in an alternate location. You shouldn't use it for normal packages.
Darren -
How do you change Metro apps default install location?
I can't seem to find an answer for this any ware, I have a 120gb ssd drive that I use for my os, and some programs. I have another 1.5tb drive that has most of my applications and data. Since space is kind of limited on my ssd drive, I would
like to change the default install location for metro apps (Microsoft store apps, or what ever it's called) to point to my larger hard drive. I don't see a way of doing this myself, so I figured I would ask here. I also work for a company that
sells custom built computers, and this is a very popular setup, but I can see this quickly becoming a problem with this type of setup. Any help would be greatly appreciated :DHere is what I did. I must warn that I haven't had any issues on my own machine doing this, but you might, so proceed with caution. Also, it's always a good idea to create a restore point before
starting.
1. Create a folder on your other drive that you want the applications to install to. I used the same location on my system, only on the other drive.
2. Now open up regedit, and go to this location.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Appx
3. Now right click on the "Appx" folder, and go to "Permissions"
4. Click "Advanced", and click "Change" at the top to change the owner.
5. Type in "Administrators" for the owner, and click ok, then ok again.
6. This should take you back to the regular permissions window. From here make sure "Administrators" or your user name have "Full Control", and click ok.
7. Now double click on "PackageRoot", This should bring up the String Editor.
8. Change the "Value Data" to the new folder you created, and hit ok, and close the registry editor.
9. Lately, give your machine a reboot, and you should be all set.
Give me a click if you found this helpful :D
I
did this to no avail. I am getting error message "this app couldn't be installed" error code 0x80073cfd.
I
am doing this on a Windows Surface RT. Here is what I did:
1. refreshed Surface to original setup
2. uninstalled all preinstalled metro apps (could not uninstall store and IE)
3. updated all windows updates (there's 3 and they are time consuming)
4. Created the same folders on my SD Card (\Program Files\WindowsApps\)
5. took ownership over appropriate registry item (HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Appx)
6. Changed the drive letter for the "PackageRoot" (from C to D on my device)
7. Shut down (full shut down) and restarted my device
When I got back in, I tried to install the metro apps and I got the above error.
Any thoughts as to why? -
Getting old LiveType data into new LiveType
I had the LiveType that came with Final Cut Express 1. Now I have the newest version and none of the old livefonts etc show in the media manager. I've looked about online and to my surprise can not find any information on this. The manual mentioned something about an install/uninstall button on the lower left window of the media manager but the only two buttons in the lower left are grayed out and unclickable. The data was installed before the upgrade and was reinstalled afterwards- no luck. All the files from the original install are AFD format.
Any assistance is greatly appreciated! I need the Sunflower livefont to work for a project I'm carrying over from the old version! EEK!An hour on the phone with tech support and we figured it out. Appears when upgrading (at least on my system) the old LiveType data folders were OVERWRITTEN. The livetype data folder in LiveType Application Support was there, but the font, object, etc folders were replaced. Reinstalling the old data DVDs does nothing. You have to move the original folders (for example the Pro Series folder) and rename it (to something like "Old Pro Series") then put it back in the appropriate place after the upgrade is done. Now I have all my old livefonts working just fine
Hopefully a fix will come out for this as I know I'm not the only person who has had this problem. -
When I install Livetype from Final Cut express 3 there is a folder called Livetype Data that is installed in the Application Support folder. The Livetype data file is over 7GB in size and contains files with the extension .AFD. Does someone know what these files are and how they are supposed to be used?
Let me clarify. Under LIBRAY > Application Support > Livetype I have a series of folders ( Effects, Images, LiveFonts, Objects, Movies, Templates, and Textures ). All of these folders are created when I install Final Cut Express - Version 4.0.
Previously, when I installed Final Cut Express Version 3.5, it also had a Livetype associated with it and it also created the same file structure as described in the previous paragraph. However, it created one additional folder from those listed above. It created a folder (7 GB in size ) that contains about 135 .AFD files of all different names. This folder is named Livetype Data. This folder IS NOT present in the Livetype version created by Final Cut express version 4.0. What I am trying to understand is (1) do I still need all these files; (2) if so, why doesn't the New Version of Livetype create this folder; and (3) if I do need them how do I reference them and use them. -
How can I tell if Adobe Flash is installed properly and upto date version?
How can I tell if Adobe Flash is installed properly and upto date version?
Hi Guys and girls, hopefully an easy question for you.
I installed Adobe flash and lightsource last night, cos I needed it to run Weebly website maker.
Anyone know if Weebly runs correctly on 10.9.1??
I have a new comp, so no previous version of flash on here, I am running OSX 10.9.1
I just want to know How I can tell if Adobe Flash is installed properly and is the upto date version?
Where do I go in the comp to find out,
If I type in Adobe flash into search it only brings up flash manager, when I click this it is an uninstaller program.
Lightsource shows in finder apps.
If I type in flash player it shows up in plugins with a version number see screen shot.
Where would I go to check for updates for things like flash on my comp?
Thanks Team,
Jason in oz. :?):)1. Safari > Preferences > Security > Internet Plug-ins
Allow Plug-ins
2. Go to this Adobe site to check. You will see the animation above the tree.
How to know whether AdobeFlash Player is installed
http://helpx.adobe.com/flash-player.html?promoid=ISMRY -
I need to rebuld the "C" drive on my computer will need to reinstall adobe cs6 when I am done, but have moved recently and lost the data to get that done! Help!
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.window using the Lightroom 3 link to see those 'Important Instructions'. -
How can I install Itunes in the data drive and not in OS partition?
My PC has a 3 partitions and I hace installed Itunes in the OS partition, very small. How can I install Itunes in the data drive?
See Williams Lloyd's post > https://discussions.apple.com/message/15670671#15670671
-
Apps Install Location Doesnt do anything?
I had CS6 installed on my machine in the C drive (125GB SSD) This was done with the very first cloud installer.
I uninstalled it as I have a new SSD that I want my apps to be installed on. I just want my OS on the C drive.
I donwload the cloud manager software.
Go to the preferences menu and find the following options:
Apps: Install Location
Files: Folder location
Before I insatll any apps, I set both of these to point to my new SSD as that is the location I want to install apps in and files.
I then click on Photoshop CC to install.
I always installs on my C drive.
Why? What is the point of a preference to install in a different location if it doesnt do anything?
Has anyone managed to install Photoshop in any other drive than the C drive? If so How?
You cant even choose where you want to install the Creative Clud app?Changing product installation location in CC App
Launch CC app.
Click on the Setting in the upper-right corner.
Click Preferences-> App
Click on Change and then navigate to your desired installation location and select the folder.
Start the Install process.
When you change it in preferences it get stored, Please confirm Preferences-App is showing the location you specified or not.
Try re-launching your CC app again after changing the preferences.
Regards,
Ashutosh -
Hi All,
I am trying to get some non critical servers to automatically install windows updates from WSUS and then reboot. I know in Group Policy I can set it to install updates on a particular day of the week, but I would like to install updates and reboot on the
last weekend of the month.
I have tried creating a simple batch file with the following lines in it, attached to a scheduled task
wuauclt.exe /updatenow
shutdown /r /f /t 0
This works ok when logged in as a user but will not work when not logged in. I did set option "run whether user is logged on or not" The reboot command works ok, but it would appear that wuauclt.exe /updatenow will not work on the login screen
even with the task set to use the local administrator account.
Can someone either tell me how I can set updates to install on a specific date, or tell me how to get the wuauclt.exe command to work under the login screen. This is for Windows 2008 R2 and above.
ThanksCan someone either tell me how I can set updates to install on a specific date
This technique has been discussed dozens of times in the forum. With the native WSUS/WUA environment this is done by [1] scheduling a
weekly update installation event on the day of your choosing, and [2] approving the updates for installation no more than =168= hours in advance of the scheduled installation time, but at least =24= hours in advance. If you want the client systems
to download the updates before the actual installation event, then set approve the updates at least =48= hours in advance. I would also configure these systems with 12 hour detection frequencies.
or tell me how to get the wuauclt.exe command to work under the login screen.
You cannot. The Wuauclt.exe is a CLI interactive utility used to allow a logged on user to access the WUA API. In Vista and later systems it was functionally replaced by the Control Panel Windows Update applet, but retained in the WUA distribution since
the WUA applies to ALL operating system versions.
If you want to run something as a non-interactive task, you'll need to write code against the WUA API to do this. There are scripts already written that do this.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
Software Inventory - Unknown Install Location
Hello,
Running the SCCM Asset Intelligence report 'Installed Software on a specific computer (Report 02E)' shows a number of software titles with 'Unknown' in the 'Installed Location' column.
I have asked the user of a particular device to check a sample of such software titles to determine if they are actually installed. They say they do NOT appear to be. This is based on searching for executable files in the C: directory.
Choosing one example of the software that has an unknown 'Installed Location', (Visio Viewer 2010) I ran the SCCM report "Software registered in Add Remove Programs on a specific computer" for the chosen device. This report had
'Visio Viewer 2010' on it.
I then ran the report 'Products on a specific computer' for the chosen device and this did NOT have 'Visio Viewer 2010' on it.
My questions are:
Why are some software titles reporting as having 'Unknown' in the 'Installed Location' column?
Are such software titles actually installed on the device or NOT? The results of the reports I have run provide conflicting views of whether the software is or is not installed on the device.
If the software is actually installed on the device, why is nothing being returned in the 'Installed Location' field?
Thank you for your assistance.AI reports depends hardware inventory classes. I hope you have enable "SMS_InstalledSoftware" class in AI.
http://technet.microsoft.com/en-us/library/cc161933.aspx
Narahari(Hurry) Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”
Maybe you are looking for
-
TS1538 My iphone is not being recognized by iTunes.
The computer is "seeing" the phone, but nothing is coming up in iTunes. I have a 2nd iphone that is being recognized. I have another computer, rebooted, reinstalled, and tried holding the home button as I plugged in the usb cable. I went to do a r
-
I have multiple pages I need to scan and email. How do I do this at one time?
I have multiple pages to send by email. How do I scan and send them all at once instead of 10 separate emails?
-
Trying to add Comment and Markup Toolbar
I am the author of a PDF document that I have opened in Adobe Reader 9. I am trying to make a Captivate demo movie on how to annotate a PDF using Reader 9, but the Comment toolbar won't come up. I keep checking it, but the toolbar just won't appear.
-
I am getting this error every time I move three specific clips on my timeline. Help?! I am using Adobe Premiere CS6 for Mac. [/Volumes/BuildDisk/builds/slightlybuilt/shared/adobe/MediaCore/Backend/Make/Mac/../../Src /Sequence/LinkContainer.cpp-245]
-
TWAIN.plugin OS X doesn't show
I read the Help http://kb2.adobe.com/cps/405/kb405072.html This part I don't understand: Quit Photoshop CS4. Copy the TWAIN plug-in from the /<language>/Goodies/Optional plug-ins/Import-Export folder on your installation media into the /Adobe Photosh