Moving instances around slugish?

Moving clips around on a timeline is slow or sluggish when I have my timeline expanded to fill a monitor, when my timeline is reduced as in an adobe window preset the movement of clips is as expected, very responsive.
When I grab a clip on the timeline it turns to a ghosted clip (looks exactly as a normal clip but ghosted but still has clip name etc when moving around).
Our other suite has exactly the same software and almost identical hardware and when clips are grabbed on this machine with a large timeline the clips actually turn to a grey only ghost (with no clip details etc) and moving around is very fast and responsive.
Suite 1 with the issue:
MacPro 4.1 - MAC OSX 10.6.6 - GTX285 card - 16gigs DDR3 ECC ram
Suite 2 without the issue:
MacPro 3.1 - MAC OSX 10.6.6 - GTX285 card - 22gigs DDR2 - FB-DIMM ram
As mentioned both suites have identical software (all latest versions) and have been rebuilt from the ground up together on the same day.
We have gone through our settings in premiere together and all prefs etc are the same. We have identical timelines when testing.
Does anyone know of any setting anywhere else that may be causing this issue?
Cheers

Just to let you know, we have 2 systems and have finally
found that it is something to do with monitor resolution and not with mouse.
The system I demonstrated in my video which worked fine suddenly had the slow instance movement
so after some testing we found that it only worked "as it should" when the timeline was
made full screen (with the " ~ " key) . When we reduce its size in the monitor gradually,
you can actually get to a point where movement becomes sluggish again.
My systems maximum monitor resolution is 1920 x 1080 and I can't reproduce this functionality / non functionality.
The other systems monitors resolution can go higher.
So in summary there seems to be a definate relashionship between monitor resolution and this annoying sluggish movement.
It would be great if someone else could confirm this with us.
Cheers

Similar Messages

  • Moving instances/clips around on timeline

    I am finding that moving clips/instances around is quite jerky and slow. Is this normal?
    Have all the latest updates etc on a MacPro heaps of ram and have Adobe Cert cuda card.
    I have just migrated from FCP and moving clips around on a timeline is smooth and fast in FCP.
    This is my only gripe with PP at the moment everything else fat and stable. Obviously I can use the overlay functions etc. but
    I like to move things around on the timeline manually... I hope that I'm doing something wrong.
    Anyone?
    Cheers

    Did you figure out your issue?
    I'm trying to remove clips and save them, and haven't figured out how to do that yet.

  • Finder hangs when moving files around in Flash Drive

    Hello Apple Community! I just wanted to ask a question and a solution to my experience on OS X.
    Recently, I started to experience Finder hanging on me when I move around files from in and out my flash drive.
    What's happening in the picture was me trying to move the ebook into the 'cmpsci3' folder, but Finder hangs from the point.
    I moved the Finder window and the icon just stays there.
    There is nothing really wrong with the movement of files; the moving does work. The problem is that the small file operations
    window disappeared and Finder just hangs there.
    I tried two solutions already:
         1. Remove the com.apple.Finder.plist file from ~/Library/Preferences
         2. Repair disk permissions on both OS X drive and USB03FD (my flash drive).
    Unlucky for me, the problem isn't fixed. I tried to tackle the problem myself and sometimes I see two Finder processes running
    in the Force Quit Applications dialog. I followed the instructions from this threadTwo Instances of Finder Running, but that does
    not work either.
    I looked around and saw that making a new user would fix the problem. I would like the community's advice on how to fix this problem
    before I do anything drastic.
    Thanks for reading and helping me out!

    I decided to go the long way and move everything where I wanted it to be.  I moved everything around in Bridge, I then synchronized the folder to reflect how it should.  So far so good!
    Thank you all for your help and interest, I really appreciate everything!
    I do have one more question now, I will also start a new thread to see what else I can get, but again thank you!
    I have syncroniced the folder after making the changes, and due to the problem I was having last time I did it again just to double check.  It said there were over2k photos missing so I clicked sync, let it do its thing.  And just to tripple check I ran it again and it is saying the same thing, missing over 2k photos.  What does this mean?

  • Can the row ID number be locked when moving task around in the schedule?

    I have a schedule in which I want to move row ID 9 to row ID 5; but do NOT want the row ID of 9 to change to 5.  I want to keep original row ID's upon moving them around in my schedule.  Is this possible? If yes, how? 
    Thank you

    Are you trying to do this with a BizTalk app?  2000/2002?

  • Problems moving files around in finder

    Does anyone else have the same problem I do when moving files around in finder. It almost always says you do not have sufficient access privileges and each time I have to go to the destination folder info box and change access permissions. It is now getting really annoying. At work I can not copy files off my laptop to the network as again it says I do not have permission though if I log on from a machine using tiger I can move the files easily. Moving files to my Lacie drive causes the same problem. If anyone out there has and easy fix or explanation I would be grateful

    I decided to go the long way and move everything where I wanted it to be.  I moved everything around in Bridge, I then synchronized the folder to reflect how it should.  So far so good!
    Thank you all for your help and interest, I really appreciate everything!
    I do have one more question now, I will also start a new thread to see what else I can get, but again thank you!
    I have syncroniced the folder after making the changes, and due to the problem I was having last time I did it again just to double check.  It said there were over2k photos missing so I clicked sync, let it do its thing.  And just to tripple check I ran it again and it is saying the same thing, missing over 2k photos.  What does this mean?

  • Moving files around in LR5

    I have imported everything from my external hard drive in LR5 so I can access all of my photos and move them around to organize them.
    I started the organization process and moved files around in different folders via LR5 and I am happy with that.
    I then noticed when I looked at the folders that should now be empty on my hard drive (viewing via Finder) the photos that I have moved in LR5 are still where they originally were when I look at the hard drive in Finder.
    I want the organization that I did in LR5 to be exactly the same when I look at the files and folders on said hard drive in Finder.
    I hope this makes sense and I hope someone out there is able to help me.
    Thanks in advance!

    I decided to go the long way and move everything where I wanted it to be.  I moved everything around in Bridge, I then synchronized the folder to reflect how it should.  So far so good!
    Thank you all for your help and interest, I really appreciate everything!
    I do have one more question now, I will also start a new thread to see what else I can get, but again thank you!
    I have syncroniced the folder after making the changes, and due to the problem I was having last time I did it again just to double check.  It said there were over2k photos missing so I clicked sync, let it do its thing.  And just to tripple check I ran it again and it is saying the same thing, missing over 2k photos.  What does this mean?

  • I am working on a program book in Pages...need help moving pages around...

    I am working on a program book in Pages...need help moving pages around...

    I think word procession mode but I used a magazine template to get started and then just kept adding blank pages to finish...I have done these before without any trouble moving the pages around...so very confused.  Thanks for any assistance. 

  • The selecton tool on illustrator is not grouping or moving graphics around the page

    When using the Selecton Tool on illustrator is not grouping or moving graphics around the page as per normal@

    Try Cmd(Ctrl)-Shift-B which is the toggle for Show/Hide Bounding Box. Sounds like your problem.

  • Computer made loud horn noise when moving things around desktop

    The computer made a loud horn noise when moving things around desktop, it was so loud it acctually hurt my ears. No, the computer is not set at a high volume.

    Hi ...
    Open System Preferences > Sound then select the Sound Effects tab.
    Deselect:    Play user interface sound effects
    You may need to restart your Mac for the changes to take effect.

  • Stop/start of BW 7.0 system-- how to deal with deltas when moving instance?

    Dear BW guru's,
    we are moving a BW 7.0 system to a new datacenter, where the R3 source systems remain the same.
    What should we consider when we want to stop the system, move it, and restart the next day, when the source systems cannot be stopped?
    Specifically I may need to clear the delta queues in BW before stopping and moving the system.
    After the system has been installed in it's new location, can we just the delta process chains without any other action, and will it extract the delta's from source system where it left of before?
    is there something I am overlooking?
    thanks for tapping your collective brainpower,
    -jh

    Hi,
    When you are miving instance and source would be on during that period then you may look for follwoing.
    Stop the loads and resume the delta after movement.
    If there are some jobs for fetching data in R3/ for BW data source then those needs to be stopped and rescheduled as some time those jobs define the delta in BW.
    If there are pseudo delta or some hardcoding for extracting delte then need to take care of the as well.
    I hope it will help.
    Thanks,
    S

  • Pointer moving all around and programs are opening

    I am trying to use my trackpad as I always have, but my mouse keeps moving around (kind of like it has a mind of it's own).  I also find that programs are randomly opening up and it feels like someone else is in control of my computer.  Help please! 

    I recently had the same thing happen.  I updated and the next day the track pad started working erractically. Tried all sorts of things, but cleaning it solved my problem.  
    To fix it, I turned the computer off, used a cleaner for my eyeglasses and made sure I cleaned the trackpad really well.  I used a tip of a needle to clean out the edges of the trackpad, as it was dirtier than I thought.  Maybe something about the update makes the trackpad more sensitive to dirt.  In other threads I read not to use hand lotions before using trackpad and to keep the trackpad as clean as possible.  
    This completely solved the problem.

  • In Finder since 10.8.3 – delay when quickly moving items around

    I think this is new since the Finder of OS X 10.8.3. It's kind of hard to explain, but here goes:
    If one triest to move items around quickly after each other, there's like a second delay before you can do the second ”grab”.
    Like this: click and drag any item (a file or folder) you have on the desktop, then quickly after releasing it click and drag that same file/folder again or another file and try to move it. There will be a delay before the comand responds. If moving several files quickly after each other this can be a bit irritating.
    I don't think this was the case before, in 10.8.2 and earlier?

    From the Finder menu bar, select
    View > Show View Options
    Is the box marked
    Show Preview Column
    checked? If not, check it.

  • Image quality when moving bitmaps around the stage

    Hey all,
    I am moving an image around the stage, and when it moves
    quickly, it becomes distorted and displays what I can only refer to
    as "banding". The image appear to be misaligned for some of the
    frames that it is moving. I have tried a number of the usual fixes,
    increasing the framerate, using a less complex image, etc. Nothing
    seems to work. Any ideas? I feel like I have seen a lot of flash +
    director movies that have fast motion, slick movement, etc and not
    appear as what I end up with. Is this something that relates to a
    screen refresh rate? Thanks for any ideas...
    - B

    Sounds like good old vertical sync / tearing. This is really
    not a fixable
    issue. You can try slowing down the movement a little...
    Someone, a while
    ago, worked on creating an xtra that would honor the vertical
    blanking
    interval, but it never really worked properly I don't
    believe. You can read
    all kinds of prior posts about this by searching google
    groups within
    macromedia.director.* for 'vertical sync'
    Dave -
    Head Developer
    www.blurredistinction.com
    Adobe Community Expert
    http://www.adobe.com/communities/experts/

  • How to stop Call Center Agents from Moving Headsets around

    We are call center with about 200 agents at a time in the building. We go thru headsets like they are candy. But we just got told to no longer use cheap headsets. So we are slowly cycling in the new headsets. So any Ideas on how to keep headsets from moving stations. Our agents destroy headsets anyway, so I don't know how well these new ones are gonna last. They also move keyboards, mice as well. They have very little respect for the equipment and think breaking them is going to give them a new one faster. Let me know what you guys think.
    This topic first appeared in the Spiceworks Community

    I think you are seeing what is called the Ken Burns Effect. You can change this setting using the Rotate, Crop, Ken Burns Tool on the middle toolbar. You can select Fit, Crop, or Ken Burns. Fit will make your photo fit by letterboxing. Crop will make your photo fit by cropping the top and bottom off. Ken Burns allows you to Pan around. You can set the starting and ending rectangles for the pan.
    Also, if you go to File/Project Properties you can set the default action for "Initial Photo Placement" to Fint, Crop, or Ken Burns.

  • Moving objects around the page

    I want to design a 'spider-gram' using objects in Pages but I find I can't drag the circle and position it in the centre of the page. What am I doing wrong?

    Just insert the arrows as you did with the circle, making sure the text layer is not selected by clicking outside of the layout area first. You can add as many arrows as you'd like or just add one & duplicate it so that it is the same color, length, etc. Assuming these arrows will be set around the outside of the circle, you will want to rotate them using the metrics inspector. You can get precise degrees of rotation by typing a number in the box at the bottom of that inspector. Then move them to touch the circle. Once you get them all placed as you'd like you want to selected all of them & group them. If these are the only graphic elements in the document you can Select All from the Edit menu. Otherwise, click outside the layout area & drag the cursor until you see handles on all of the objects. Now, got to Arrange > Group & they will become one object, easier for any further moving around.
    Peggy

Maybe you are looking for