Moving iTunes Lib over to external hd connected to airport extreme and listening

Hey hows it goin everyone. I know there are a ton of topics already about this topic but I didnt want to go through all of them and I really just want a solution to this so I can get underway. My music collection is very important to me and can not afford to lose it all. I have a western digital hd connected to my airport extreme that I use to back up wirelessly. I want to take my 180 gigs of music and put it on my external and then be able to play/stream it though my itunes library while I am on my home network. Im not sure what to do. I have tried moving my itunes to my external and then changing the file location to the external but it never seems to work. I would really appreciate it someone could help me out step by step wise. Would be really helpful if someone wanted to sign on skype or ichat and talk me through it. Thanks again guys and girls.

Ok so I did exactly what you said. When I go to and play a sony on itunes and I click the get info button is still shows that the file is located under my user and not the external hd. Anyone know where I go from here. Like I said and ichat or skype would be awesome so we dont have to keep going back and forth. I am stumped on this one. Can anyone please help?

Similar Messages

External HDs connected to Airport Extreme and Imovie / Iphoto issues

I recently purchased a WD mac edition "my book" hardrive in order to store all my imovie, iphoto and itunes files externally. I connected the hard drive to my airport extreme base station but was unable to move my imovie files to the hard drive. Instead I received some derivation of the following message - "volume not compatible." After being transferred to a number of different people at apple support, I was finally told that the imovie, iphoto etc... are not compatible with hard drives that are connected wirelessly. I cannot believe that this is the case (presumably imovie files can be saved on timecapsule). I would be most grateful if someone could help me out here.

I was finally told that the imovie, iphoto etc... are not compatible with hard drives that are connected wirelessly. I cannot believe that this is the case
Nor can I. Files are files, some are bigger than others but to a hard disk, they're all the same.
I would presume that you don't get this message when connecting your My Book directly to the computer's USB port?
Apple Support simply couldn't have understood you correctly. I wouldn't expect to use iMovie or iPhoto to manipulate remotely stored files, but merely copying them for archival purposes is a completely legitimate use for the external HD.
This makes no sense. Perhaps you could post your question in an iLife forum.

I have my Time Machine on an external drive (not connected to Airport Extreme) and I have an external HD attached to airport extreme. Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme. How?

I have my Time Machine on an external drive (not connected to Airport Extreme) and I have an external HD attached to airport extreme. Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme. How?

Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme.
Sorry, but no.
Time Machine will backup your Mac, but not the hard drive attached to the AirPort Extreme.
Time Machine will back up a hard drive only if it is attached directly to your Mac via USB or FireWire.

I have an Airport Express connected via optical toslink to a dac/amp in turn connected to speakers. When using iTunes I get message "no speakers connected to Airport Express" and audio sound has drop outs.

I have an Airport Express connected via optical toslink to a dac/amp in turn connected to speakers. When using iTunes I get message "no speakers connected to Airport Express" and audio sound has drop outs.

Ok, if you are connecting the AirPort Express Base Station (AX) to the existing wireless network, then the DSL in the next room is most likely a combination DSL modem and wireless router. Thanks for clarifying that for me.
Although they may only be separated by a single wall, the building material used in that wall may be enough to prevent the AX from receving a "good" signal from the DSL router.
Since I don't know what computing equipment you have available, please check out this AirPort User Tip: AirPort - Optimal Base Station Placement to see if you can get some SNR measurements at the location of your AX. To do this properly, you will want to power-off the AX and only get these measurements for the DSL router.

Stopped see files on external HD connected to airport extreme.

I have connected a 3TB external HD to my Airport Extreme. I have been able to use and access all the files over the network through finder without any issues. Recently I stopped being able to see the files in finder. I can still see the dirve and the main folder but that is it and I cannot see the file structure or individual files. This also has my iTunes files and Itunes can still connect to the file locations. Or I can say show in Finder and it will show by but still will not show other files. If I connect the HD directly to the computer then I can see all the files no problem. Thoughts?

OK...Here is where things stand:
I am logged in as the administrator on my Computer
When I connect the drive directly, do the Get info, I have read & write permissions
When connecting over wifi the Permissions say, "You have Custom access"
If I seach for an iTunes file that I know is on the remote HDD it plays
I can show this same file in finder and see the file structure
But I if try and open the structure top down, it won;t show access
Through Airport Utility I Have access and can see the extrenal drive and folder is shared.
Should "Back to Mac" be enabled? I am not sure what other knobs to turn at this point.

External Drive connected to Airport Extreme, need Time Machine 3 Mac's Help

I own an Airport Extreme and just recently added two new Macs with the Time Machine feature to our household. I would like to use Time Machine to backup to my Airport Extreme that has a 500 GB hard drive connected. It seems Apple has this blocked since they have released the Time Capsule version of the router. Is there a work around this feature so I don't have to go out an purchase what I basically have already got? Please help. We would like to upgrade our older macs to Leopard and us the same system to back them up as well. Please advise. Thank you.

I had my USB drive on my APE working with Time Machine under 10.5.1 very reliably. A few days ago however, I needed to suspend a backup operation, and when I came back to restart it, time machine refused to mount the disk image on the drive. After several attempts to get it to connect with no luck I decided to delete the image (the sparce image file) and start over. Now TM refuses to create a new image.
BTW, on the Mac OSX hints site there have been suggestions to start a backup with the drive directly connected, then stop the backup, move the sparce image file to the root of the drive, reconnect the drive to the APE base station to get it working. I tried this again, but I think Apple has changed something in 10.5.2, because when directly connected TM no longer creates a sparce image file.
Anybody else seen this behavior after upgrading to 10.5.2?

Time Machine clueless about external HD connected to Airport Extreme

This is not my first post about HD connected to Airport Extreme. Just came back from Apple store. Spoke to Geniuses there in tech support desk and they are clueless.
Here is situation: have 7 Macs in the house connected to Airport Extreme wirelessly. In that respect things are working fine. Last week I purchased brand new WD My Book external HD and connected it to Airport Extreme using USB (it also has Fire Wire but that is not a point here).
As per forum advices I re-formated drive using disk utility to Mac Extended journaled, GUID. here is result:
iMAC x 3, with Tiger - see, mount and use My Book easily, shows on desktop as mounted drive
MacBook Pro w. Tiger - same as above, back up every day to My Book
MacBook with Leopard x 2 - no My Book on desktop, Time Machine doesn't see it
Mac Mini with Leopard - same as above, no trace of My Book, Time Machine doesn't see it
* This problem evolved from me having regular 160 GB FAT32 HD connected to Airport Extreme. Again Tiger machines were using that drive every day no sweat.
* Then I decided to upgrade all Macs to Leopard for one single reason only - Time Machine. (Good that I didn't do it but rather decided to introduce new, bigger and better USB drive first).
* Western Digital My Book is being sold in Apple stores as "drive that is recognized by Time Machine" so I bought 1TB unit.
* All Macs and Airport Extreme are up to date.
Any suggestions? Thank you in advance,
Zack

I cannot tell you why your Apple Genius told you what he did, but he/she was dead wrong. Apple sells its Time Capsule product, so they are not interested in making the AEBS a product competitor.
I will give you a little secret for which you will forever be indebted to me.
Open your Terminal application in the Utilities folder and at the prompt enter or paste the following command pressing RETURN after:
defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
Miraculously your problem will be Solved.

IMac doesn't recognize external HD connected to Airport Extreme

Just bought a new Airport Extreme and an Iomega Prestige HD for file sharing and backup through Time Machine. When I open Disk Utilities, the external HD is not listed. I did connect the HD directly to the Mac and it showed up. I reformatted the disk and then reconnected it to the Airport Extreme...still nothing. Any help would be appreciated.
Brian

When I open Disk Utilities, the external HD is not listed.
You won't see it in Disk Utility unless the drive is connected directly to your Mac
I reformatted the disk and then reconnected it to the Airport Extreme...still nothing.
The USB port on the Extreme is under powered. You almost always have to use a powered USB hub, even if your drive has its own power supply
backup through Time Machine
Careful...Time Machine backups to a drive at the USB port are not supported by Apple. A few users report that they apparently have been able to make this work, but most us encounter corruption issues either immediately, days, weeks, or sometimes a month or two down down the road.
Bottom line....it's "iffy" and there's no support if you have problems, which are very likely.
From Apple: Time Machine can’t back up to an external disk connected to an AirPort Extreme....
http://docs.info.apple.com/article.html?path=Mac/10.6/en/15139.html

Slow streaming from external drive connected to Airport Extreme

In the last week or so, when I try to play videos stored on my Airport Extreme on my Apple TV, they are extremely slow to load. It takes about 10 minutes before they even play, and at various points throughout it will have to essentially buffer for the same amount of time. The problem seems limited to the Apple TV, though, as I have no problem playing the same videos directly in iTunes.
Has anyone else experienced this lately?

Katie, I have had the same problem with both AIrport Extreme and a new TC.
Have you update the firmware to 7.4.1, if so downgrading back to 7.3.x fixes the problem for now.
I think there is something going on as a result of the 7.4.1 firmware upgrade.

Apple TV often drops connection with AirPort Extreme and Express stations

Here's my setup:
- Mac Pro in basement office connected to AirPort Extreme (802.11n) station via Ethernet
- AirPort Extreme station running WPA/WPA2 security and 802.11n (b/g compatible)
- AirPort Express station across basement room connected to stereo expressly for AirTunes purposes
- Apple TV and MacBook Pro on house ground floor, both connecting to the network via WiFi
(unless specified, the software and firmware in my devices is all extremely up to date. I write about Apple news for a living so I know when the updates land and install all of them almost immediately)
Here's what's going wrong:
Since I have one of the first gen Apple TVs with a 40GB hard drive but a 100GB iTunes library, I use streaming almost 100% of the time. The Apple TV can usually connect to my iTunes library for streaming via WiFi, but if the AirPort Express (a b/g device, mind you) is active on the network, the Apple TV and even my MacBook Pro get booted off the network usually between 12-24 hours, if not 48. Sometimes WiFi seems to work itself out and I can get the MacBook Pro back online, sometimes it even needs a full restart, as Mac OS X will start giving me nothing but "there was an error trying to join this network" warnings. Just as frustrating though, the Apple TV getting booted off means I need go through the whole tedious process of connecting it to WiFi again (it doesn't remember the password for some stupid reason), and then manually surfing again through the Sources list just to get back to streaming my media.
What the heck is going on? Is it the kind of security I'm running? Should I try WEP or... none at all? I would try "downgrading" the Extreme station's network type to only b/g (excluding n entirely), but I don't see that option in the radio settings anymore; it's all just flavors 802.11n now. When I set up the AirPort Express to connect to the network just for AirTunes streaming to the stereo, I used the setup wizard that the AirPort Utility provides. Should I attach it a different way? Perhaps manually set it to "participate in a WDS network" or "extend a wireless network?"
Any thoughts or similar experiences are very, very appreciated. My wife and I love this setup, but its unreliability is really getting on my nerves. Thanks in advance.
Message was edited by: bedoughty

Firstly, the easiest bit (although I don't believe you need to do this):
I would try "downgrading" the Extreme station's network type to only b/g (excluding n entirely), but I don't see that option in the radio settings anymore
You will get additional settings if you hold down the option key while browsing the radio settings drop down menu.
Moving on: Unfortunately a dropped connections seems to be a problem with umpteen causes and not only is it difficult to troubleshoot with someone in a forum it can also be made even more difficult because many problems are associated with network settings on a router that the person who is trying to help is unfamiliar with.
However you seem to be convinced your problems arise when your express is running which may narrow things down a little if correct, if not it may actually lead us away from the answer to your issue.
Is it the kind of security I'm running? Should I try WEP or... none at all?
I use WPA and have no problems (password = 8 Characters)
Should I attach it a different way? Perhaps manually set it to "participate in a WDS network" or "extend a wireless network?
I have my expresses set to participate in a WDS network, but that's because I use them for other things other than itunes, I would have thought 'join a network' would be fine.
You could check that all your devices are using independent IP addresses and all are using the same subnet. You could also check that no two devices have the same mac address, I've been told a million times this can't happen, but I've seen it. You may be wise to check these things before and after your devices have been 'kicked off the network", you may even want to write them down to see if any are changing.

HELP - iTunes 9. Library on external HDD connected to Airport Extreme

OK. I've done a search and found similar questions, but no real answer to my problem, so here goes:
I've got all my media contained on an external drive connected via usb to my airport extreme. My problem is that iTunes continually (95% of the time) redirects itself back to default folder on my iBook. The external drive is always on, so I'm not sure why iTunes seems to redirect itself. I have noticed that when I search out my external drive through Finder, there is a slight lag before the file list comes up? Could this be the iTunes issue? (it's trying to connect, but the lag throws it off, so it thinks the folder isn't there and creates a new one?)
Any insight would be greatly appreciated!

Final follow up: Sorry this took so long, but better late than never. So, I figured out why there was an issue with the "login item" solution....multiple accounts. It seems that one of the accounts wasn't properly login onto the Airport Express (and ultimately the external drive). This was bringing up an error message, but I wasn't seeing it (as it was showing up under the other account). Once I took care of the login issue on the other account, all was well. So, to sum it up, the best solution to this problem seems to be setting the external drive as a login item. Thanks again. The help was much appreciated.

Folder on External HD connected to Airport Extreme shows no files

When I view my external hard drive on my airport extreme a folder called "music" shows "no items". However, I know there are several hundred folders inside the folder. In fact, when I plug the drive directly into my macbook pro, I can access all the folders. The permissions are set to read & write and I have access to all other folders on the drive via the airport extreme. This happened suddenly when I moved a munch of files into the folder. Until then I had full access at all times.
Does anyone know why this would happen?

OK...Here is where things stand:
I am logged in as the administrator on my Computer
When I connect the drive directly, do the Get info, I have read & write permissions
When connecting over wifi the Permissions say, "You have Custom access"
If I seach for an iTunes file that I know is on the remote HDD it plays
I can show this same file in finder and see the file structure
But I if try and open the structure top down, it won;t show access
Through Airport Utility I Have access and can see the extrenal drive and folder is shared.
Should "Back to Mac" be enabled? I am not sure what other knobs to turn at this point.

Problem mapping USB external drive connected to Airport Extreme on my PC

I am having a problem mapping my USB external drive in my PC running WIndows Vista. Here is what I have so far:
USB External Drive connected to my AirPort Extreme which is connected to my Century Link modem/router.
I have installed the USB drive using the Airport Utility. In the Disks section the Enable File Sharing is checked, Secure Shared Disks is set to With a Disk Password, I have entered the password in the next 2 rows, and finally AirPort Disks Gues Access is set to Not Allowed. The section below named These Settings Configure Windows File Sharing is empty. Am I supposed to put something here?
I was also told I need to map the drive in my PC, but when I go to do that via the Computer and the Map Network Drive, I get stuck where it asks me to enter a folder name. I read many of the posts which tell me I need to enter among other things the disk's ip address, but I am unable to find it anywhere. Where do I find what to put here?
Can someone please help this frustrated user?

I had my USB drive on my APE working with Time Machine under 10.5.1 very reliably. A few days ago however, I needed to suspend a backup operation, and when I came back to restart it, time machine refused to mount the disk image on the drive. After several attempts to get it to connect with no luck I decided to delete the image (the sparce image file) and start over. Now TM refuses to create a new image.
BTW, on the Mac OSX hints site there have been suggestions to start a backup with the drive directly connected, then stop the backup, move the sparce image file to the root of the drive, reconnect the drive to the APE base station to get it working. I tried this again, but I think Apple has changed something in 10.5.2, because when directly connected TM no longer creates a sparce image file.
Anybody else seen this behavior after upgrading to 10.5.2?

Smart folder not searching external HDD connected to Airport Extreme

I have bunch of movie files (mp4 format) on external HDD connected to the new Airport Extreme station. When I create a smart folder on either one of the machines on my local network, the smart folder would not search at all through the HDD connected to the Airport Extreme.
I have another HDD connected directly to my PowerMacG5Quad and smart folders successfuly searches through that drive.
However, when I ask for any type of search (i.e. any kind of files) located on a networked external HDD, smart folders acts is if the networked drive is not even there.
Obviously, my purpose here is to have the difference machines access (RSS style) all the movies files located on the networked HDD.
Is it some permission in Airport Extreme?

Does this help?
http://apple.stackexchange.com/questions/117135/access-disk-attached-to-airport- extreme-over-internet

Access USB external HDD connected to Airport Extreme

Hi.
Today I configured "Back to my Mac" and I'm having a little issue with the external HDD that is connected to the Airport.
Let me explain the configuration: Airport Extreme (latest version) configured with Back to My Mac option, with an external HDD connected using USB port (The HDD is externanly powered). iMac computer with OSX Mavericks wireless connected, configured with iCloud Account and Back to My Mac with screen sharing).
I can access the shared screen and control the iMac from my Macbook Air outside my home network.
The issue is when I try to access the "network HDD" because I can connect using the right user but Finder windows never shows the HDD content. I have to disconect and reconnect to the external HDD to be able to see the files (If I have 3 windows and want to access the HDD on each of the 3 windows, I have to disconnect and reconnect 3 times).
Question:
There is any way to access the external HDD and be able to see its content using the configuration mentioned? The disconnect and reconnect procedure for each window is normal? There is a better configuration I can apply?. Just as information, from my MacBook Im able to see perfect the HDD content from outside my home network.
I know the question is a little bit confusing, but if you need any additional info please let me know.
Thank you.

Does this help?
http://apple.stackexchange.com/questions/117135/access-disk-attached-to-airport- extreme-over-internet

Moving iTunes Lib over to external hd connected to airport extreme and listening

Similar Messages

Maybe you are looking for