Moving keyframes at end of clip?

Is there anyway to move a keyframe that is at the end (or beyond the end) of a clip? (in the effects control window) Often, keyframes at the end do not even half show within the effects control window.
Certainly, keyframes at the end of a clip should be easily selectable and movable.... and it would be nice if keyframes beyond the end of a clip had some kind of interface, rather than just not showing up without extending the clip.

Similar Messages

Moving to the end of a result set

When moving to the end of a result set using the keyboard shortcut Ctrl+End the view of the result moves to the last row, but the current field does not move.
So when I use up or down keys after Ctrl-end, I'm back at the top of the result set.
The current field should move also.

Here's the way I do it:
Put a blade into the track where you want the echo to start and add audio from slug
to approximate length of reverb/echo required. Highlight both clips and nest.
Add filter to nest and tweak as required. Remember that to open a nest in the viewer
to adjust filters you must right click and 'open in viewer'

Repeated Frames at the end of clips

I have a MacBook Pro with the adobe premiere pro cc 14, but I noticed this problem is CS6 also. The problem is this: Say I have two clips in the timeline that are connected (Clip A, Clip B).
If I alter Clip B in anyway (change scale or position, or simply remove it from the timeline) the first frame of Clip B will remain at the end of Clip A. So, when I execute the playback function I can see a quick flash of Clip B at the end of Clip A.
Here's what I've tried:
I tried rendering the files--didn't work.
I tried simply trimming the repeated frame off--didn't work.
Here's what did work.
There's a straight line that goes through every clip, I don't know what its called but I think it has something to do with the speed, I would drag that from say 100 to 96.55. The video would have the red render bar above it, and the repeated frame would disappear.
HOWEVER, in my current project I have serval repeated frames in a blank space where there are video clips, so the previous method can not work.
What the heck!?!?!
Thanks

What are these clip exactly
Please post a screendump in treeview.
MediaInfo Mac

Video freezes at the end of clips.

Hi, I have encountered strange glitch. I have put many short clips into project, with straight cut, no transitions between. Some of clips doesn't follow seamlessly - video freezes for about 1sec at the very end of clip but I can hear audio from following clip and after that 1sec freeze video continues with audio. Therefore I "miss" that 1sec of video from the beginning of the clip. It happens only with some of clips and sometime I can sort it out with slight trimming. But mostly cannot.
What am I doing wrong there?

If you go into iMovie Preferences, make sure you select "Display Time Codes" as hh:mm:ss:frames.
By default, iMovie edits to the nearest 10th of a second, but by checking this parameter in preferences, you can edit to the nearest frame.

Is there a shortcut for moving playhead precisely in a clip

Is there a shortcut to move the play head precisely in a clip? For instance 1 second forward from beginning of clip -- or 1 second back from end of clip?
I want to insert key frames for fades and zooms. thanks.

Sean:
In your timeline, and nothing selected, place the playhead in the reference location (in your example, at the beginning of your clip) and just type the desired playhead "movement": i.e. type 10 + ENTER and your playhead will move 10 frames forward. You can use seconds too: i.e. typing -1.15 will move your pleyhead 1:15 secs. backwards.
Hope it helps !
Alberto

Visual indicators at beginning/end of clip or sequence?

In cs6 is there any sort of visual indicator to let you know that you are at the beginning/end of a clip or sequence? Anyone familiar with FCP, I'm look for something equivalent to the L shape or blue line that appeared at the beginning and ending of clips and sequences.
Thanks.

You could use "show head and tail " here:
http://help.adobe.com/en_US/premierepro/cs/using/WS3E67AF4C-B2A2-4f04-90B4-F8CCFB74B144.ht ml
under the heading:
Set the display style of the video track

Snapping cursor line to end of clips

I recently upgraded from 1.5 to 3 and for some reason by default the play line thing doesnt snap to the end of clips automatically. Does anyone know how to find the option that will allow that line, i dont know what its called, the line that scrolls past the clips when you hit play, how to make it so that when you click hold and move that line it automatically snaps to the end of the clip when it passes it?

Maybe you need to turn on the relevant Snapping option, Snap to Clip. They appear in a drop down menu when you right click on the Timeline at the bottom of the screen.

Timeline removing start and end of clips

Apologies if this has been posted before - got through 20 of the 116 pages to look for it!
iMovie 6.0.1 appears to have a bug when dragging clips from clip pane into timeline. Start and end of clip are cut off. Same occurs when adding transition in timeline. This does not happen when working in clip viewer rather than timeline, though there is still a small loss when adding transitions (this probably accounts for a previous posting complaining about loss of audio synch when adding transitions).
iMac, PowerMac6,1 PPC 1GHz Mac OS X (10.4.6)

That reminds me of a slightly different version:
SQL> with t as (
2 select 201050 yw from dual union
3 select 201051 from dual union
4 select 201052 from dual union
5 select 201101 from dual union
6 select 201102 from dual
7 )
8 --
9 --
10 --
11 select trunc(trunc(to_date(substr(yw, 1,4), 'yyyy'), 'y')
12                            + (substr(yw, 5,2)
13                              + (case
14                                   when to_char(trunc(to_date(substr(yw, 1,4), 'yyyy'),'y'),'iw') ='01'
15                                   then -1
16                                   else 0
17                                 end
18                                 )
19                              )*7
20              , 'iw'
21              )
22 from    t;
TRUNC(TRUN
13-12-2010
20-12-2010
27-12-2010
03-01-2011
10-01-2011
5 rows selected.
Found that one here about a year ago: http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:509645007430#tom69446106735028
Needed to use that approach as well to deal with yyyymm format one application I worked on then.

A portion of the audio is missing on the end of clips?

Using Adobe Premiere Elements 7 a portion of the audio is missing on the end of clips after I bring it in. The files are motion JPEG AVI .

Welcome to the forum.
I do not recall seeing any issue with muxed MJPEG files, regarding truncated Audio. First, take a look at this ARTICLE on MJPEG files.
Next, all Audio files (muxed or elemental streams) must be Conformed, which converts them to 32 bit, floating point files for editing. If one does not allow the Conforming to complete 100%, the Audio can be truncated. See this ARTICLE.
Good luck,
Hunt

Field is moved at the end of the page.....

When i run the report in report builder the first page is displaying the fileds and data perfectly but in next page the fields are moved, first field is moved at the end of the page i.e the second page have only the first field and the rest of the field is moved to third page.
How to resolve this?
Thanks and regards,
Skud

Kiran,
Draw a line in page footer with 1 pix or 2 pix whatever you want.
Regards,
Senthil Maruthappan.
Team work never fails

Magic Moving Keyframes

hi,
i did a quick search and came across one other instance of this but it wasnt answered ( unless I didnt search properly!)
I have a parent layer with other layers in it. I keyframe aspects of the parent layer, like size and position etc. works fine. But if I want to change the duration of one of the child layers either by draggin or pressing o to auto extend to the current position in the timeline, the keyframes in the parent layer disappear. Actually i think they are moving to somewhere outside the scope of the project because sometimes they come back again.
They are not compressing because the parent layer is not changing in length.
The only workaround I have found so far is to drag the child out of the parent, adjust its length, then drop it back in again.
It doesnt always do this, havent figured out why or not it does yet.
Any ideas?
adam

hi,
funny I'm in the middle of a commercial which uses a lot of cut out animation elements. As I knew I'd be using big layers moving on and off screen I followed Particks advice and used behaviours instead of keyframes. And I have to say that so far I have been able to achieve everything i wanted with them. ( its not that complacted a commerial!). Its like so many things in Motion i just hadnt used them enough to be proficiant and so i stuck to keyframing. I'm a convert!
oh and i'v enot had any problems with moving keyframes. Altough i did again earlier today and is definatley something to do with oversized layers, if any of you Motion coders are listening in!
regards
adam

Popping sounds at end of clips

Hey
I'm using Audition CS6 (windows) and I'm getting these click/pop sounds at the end of clips in multitrack. If I open the individual clips up to edit and play it through there isn't any sign of it. However if I play the clip through in edit mode and stop it near the point where the pop is I will hear the pop when I hit stop. The irritating thing is if I do a mix down these little errors are still there and they are pretty loud!
Any idea what could cause this? I'm using windows 7 and Cs6.
G

Without seeing the waveforms and/or hearing what you've got this is a complete shot in the dark -- and probably unlikely since it sounds like this is happening to multiple files and not just one but:
1) Does the audio in your clips end with the waveform much above or below 0 amplitude? (You need to zoom in extra close to see if this is the case) If your wave stops too far above or below the line, and then suddenly drops to 0 as it's playing through in a mix it can cause clicks.
2) Do you have the gain boosted on these clips anywhere in the multitrack mix window? If so, maybe you've got a click in the wavefore that's not too noticeble when playing in the edit window, but boosting the gain in the multitrack makes it more noticeble.
~Dave

Adding transitions and titles: no choosing ends of clips?

Hi there,
Does anyone have a clue about the following:
When setting a theme you can choose to tick the box 'add transitions and titles'. According to the tutorial you should get the following options about the end of clips in your projects:
- Overlap ends and shorten clip
- Extend ends etc.
How come I do not have this option? I'm working in Imovie 8.0.6.
Any suggestions? I would like to use these options now and then...

This was an option in iMovie 08, but it was removed in iMovie 09.
The current behavior is that it overlaps ends and shortens the clip. This is the way you would want it to behave for video. After you painstakingly edit out Uncle Joe picking has nose at the wedding, you don't want a transition to put the nose-picking back into your movie. The overall length of the movie stays the same.
For photos, it was useful to have the option of extending or overlapping and shortening. But this is no longer an option as far as I know.

Panning via changes in "Position" keyframes produces pan only at *end* of clip

Hi. I am trying to create pans across relatively short time lapse shots. When I do this by making two Position keyframes, the pan occurs quickly in the last tenth of the clip or so. To make the pan play itself out across the whole clip, I have to make Anchor Point keyframes. I wouldn't care, but you can't simply drag the image with that value-you have to manually manipulate the X & Y values.
I don't know whether it's important, but I am working with Photo-JPEG clips that can be multiple gigabytes in size. The resolution of the images within are often above 4000x4000, which explains why I want to make pans (to show the subject at full resolution.)
Any ideas?
Thanks,
Joel

If I don't use anchor keyframes, the video ends up like this:
http://dl.dropbox.com/u/11229786/grevillea.m4v
The simple position keyframing seems to work with smaller videos though. Here are the position keyframes for the above video. Although I'm not doing anything differently (from smaller videos where everything works,) the coordinates don't change. This is strange, as you can obviously see in the video that the motion is registered, albeit very quickly and awkwardly.

Position keyframes for titles not acting properly; keep moving backwards near end keyframe

I have no clue what in teh world is going on here. i will set a keyframe in the beginning for the titles initial start point. Move ahead 2 seconds. Set a keyframe. Move the title to where I want it. Play it back, and then right before the end keyframe, the title will go the complete opposite direction if I have another keyframe ahead of it I want it to go to. So yeah, it moves back then moves forwards to the next keyframe. Please help me understand this lunacy.

Having recently encountered this issue, I searched the web for a solution and stumbled upon this thread, which to my surprise was not only left unanswered, but also seemed to be the only search result that was directly relevant to my problem. Luckily, I was able to adapt some advice from a similar situation. Since I finally discovered a solid method, I figured I would offer my knowledge to anyone else treading the same path as me.
I guess they call something like this a "wobbly" keyframe. In After Effects, someone gave the advice to right click and change the temporal interpolation to LINEAR. In premiere, I noticed that they were ALREADY linear, but then I recalled Shooternz post about a spatial ease.
Highlight ALL the keyframes, right click, then select Spatial Interpolation and click on Linear. This should solve the issue. You can then add eases and such to meet your goals.
I knew from the beginning that it must have been an invisible knot in the bezier curves. I pulled the bars in every direction, but all it did was tighten or loosen the knot, causing the motion to speed up or slow down, but it would always hit the knot and reverse before continuing forward. You know how Illustrator will create crazy-looking lines when you try to add too many points with strong curves? Well the same logic applies to this, but Premiere has a much more difficult interface when dealing with bezier curves. In other words, by getting rid of the extra curves instead of trying to fix them like you can in Illustrator, it fixes the problem much more easily.
I hope I helped to clarify the issue and help you understand the logic of what went wrong, so you can move on now and perhaps adapt this knowledge to future obstacles.

Moving keyframes at end of clip?

Similar Messages

Maybe you are looking for