Moving mail to folders - is it possible to type the name of the folder, vs scrolling?

Apologies in advance if there is already an answer to this question in the forums; I searched with every combination of the subject I could think of...
Context: my iPhone 4 syncs with an IMAP mail server.  I have lots of folders on the server, and I can see all of them on the iPhone.  I know how to use the "file" button at the bottom of an email, to move the message to a folder.
Question: is there a way to "open" the keyboard during the filing process, so that I can type the name of the folder, rather than scrolling through the folders?
Thanks for your help.

It also works  with google mail.
For someone looking for help you sure have a funny way about you. Trying to narrow down where and under what circumstances a problem occurs is called troubleshooting. Showing that mail's imap works with gmail and google should al least give you pause to reconsider your out and out assertion that the problem has to be solely with mail and perhaps lead you to look at the possibility of an issue with the interaction between mail and godaddy. Just because someone who answers the phone at godaddy says the problem has to be in mail don't make it so.
You know were all just users here, no one is getting paid. Those of us who try and help users like yourself are doing it to give something back to the community. You don't like my help, fine don't take it but check the attitude at the door.
Hope you get your problem fixed.

Similar Messages

  • Mail running under LIon no longer grays out the name of the sender of an email that has been read.  How can I get that to happen?

    Under the old version of Mail, when an e-mail was read, the name of the sender was greted out so that I knew I had read that email.  This does not seem to happen under the new Mail thaqt came with Lion.  Help!?
    Chuck Humphrey
    [email protected]
    303-997-2755

    Kirk,
    Thanks again for your suggestions. No, I don't get an
    error message. In fact nothing happens. My name and
    key are typed in and from what I understand, once you
    do that with a real key it directs you to the
    registration page. When I get done entering the
    information the window just sits there without any
    button or option to continue.
    QT Pro is already in the QT (non-pro) you installed and the key (which is a hash of your name in part) allows the Pro features to work.
    No redirect, internet, nothing like that. As such many people have activated and think they haven't. Just look at the menu items and see if the "Pro" logo is shown next to a few (which are greyed out and not available without Pro). If not you are done.

  • I found the solution to a Mavericks bug on the Mail program. How can I share it? Several of my mail boxes stopped functioning properly when I updated to Mavericks. After long hours, I discovered that if I change the name of the mailbox, the content works.

    I found the solution to a Mavericks bug on the Mail program. How can I share it? Several of my mail boxes stopped functioning properly when I updated to Mavericks. The title of the mails stored in the mailbox appear, but the content was unavailable.
    After 4 long hours at the phone with the Apple staff unable to help me, I discovered that if I change the name of the mailbox, the contents of the mails stored there become available.
    Please, make this solution available to other people!

    You have found the the way to share it.   Include your problem and its solution in a forum post in the Mavericks forums.   Then mark you own post with a green solved star.
    Note.  You won't get any points for that; points are only awarded where you mark someone else's post as either helpful or solved.

  • Is it possible to reference the name of the current table in a formula?

    Hi,
    I am wanting to be able to reference the name of the same table that I am entering a formula into, i.e.:
    =SUMIFS(Net,Event,"CURRENT TABLE NAME HERE",Category,"Publicity")
    Is this possible?
    Thanks,
    Nick

    AppleScript can access the current table name, so it if you are doing a lot of formula entry in different tables you could click once in a table and have a short script insert the formula for you.  Here's a simple example:
    Say you have a data table like this:
    Event
    Category
    Net
    Event 1
    Publicity
    10
    Event 2
    Celebration
    20
    Event 1
    Supplies
    5
    Event 1
    Salaries
    20
    Event 3
    Celebration
    25
    Event 1
    Publicity
    20
    Event 2
    Publicity
    11
    Event 1
    Accounting
    20
    And (important) you have 'Use Header Names as Labels' turned on in Numbers > Preferences.
    You caninsert this formula:
    =SUMIFS(Net,Event,"Event 1",Category,"Publicity")
    ... into a table named Event 1 that looks like this:
    Cat
    Amount
    Publicity
    30
    ...with a script like this:
    -- NB:  the \ "escape" the quotation marks so AppleScript takes them literally
    tell application "Numbers"
      set t to document 1's active sheet's first table whose selection range's class is range
      set c to t's selection range's first cell
      set c's value to "=SUMIFS(Net,Event," & "\"" & t's name & "\"" & ",Category,\"Publicity\")"
    end tell
    The script automatically inserts the name of the table you have clicked in.
    (To use the script just copy and paste into Script Editor, click once in the cell where you want the formula (B2 in the example) and click the 'Run' triangle button in Script Editor.)
    SG

  • How to get the name of the attachment in Sender Mail Adaper?

    hi mates,
    I've scenario a where in I need to pick up a mail with an attachment and change its extension and send it to target system using file adapter.
    I'm able to pick up the mail with attachment using sender mail adapter but not able to get the name of the attachment so that I can use it in mapping or on the adapter configuration. How do I read the name of the attachment and manupulate it?
    I looked at the thread sender mail adapter - attachment name But the solution is not described. I think Stefan is talking about the SP!2 for PI 7.0. I'm on XI 3.0 what is the equivalent SP for that, SP20? Stefan, can you please throw me more light on it?
    I appreciate your valuable inputs
    thx in adv
    praveen

    Thanks Aamir.
    Earlier I replied to that thread asking for more details...but did not see the response...
    anyways, thanks for your quick help..
    but I wonder abt the PI SP12/ XI SP20 pre-requisite. We can have adapter modules on SPs lower than PI SP12/XI SP20 as well, can we not?
    thanks
    praveen

  • I can't add the contacts from Microsoft to the OS X 10.10 It makes me can not know the name of the people I talking to on message, mail.

    I can't add the contacts from Microsoft to the OS X 10.10
    It makes me can not know the name of the people I talking to on message, mail.

    i need help

  • Changing the name of the e-mail sender

    Hello guys,
    Whenever someone changes the status of a service request then Siebel sends an e-mail informing the customer of that the status has been changed. When the customer opens the inbox he will notice that the sender is "[email protected]"We have a new request where the customer would like to view a different sender name in which instead of viewing "[email protected]" he would view "Technical Support Center" along with the message. Is there a way to change the name of the sender? If so how?
    Regards,

    Just use
    "Technical Support Center" <[email protected]>
    and not only
    [email protected]
    when you configure the from field.

  • Is it possible to find out the names of the various objects (jpegs, pdf's, etc) in a keynote presentation?

    I have to re do a keynote presentation for powerpoint -- the export feature won't work on the pc -- it simply says that it wasn't possible to display some of the text and objects because they had become corrupted, and were replaced with blank slides.  I was wondering if it's possible to find out the names of the objects used in the presentation.  That way I could save them to a folder and just paste them in to the PPT version on the PC.  I know they have to be somewhere on the Mac that the presentation was made on, so is it also possible to find out where they would be?
    I tried right clicking on the objects in the slide, but there was no 'get info' option, like there is in a finder window.  Please help if you can.
    Chris

    There are a few options for you here. In the Inspector>Metrics Tab, when you click on the picture, it will display the name. Then you can use the find feature of the Finder to locate the picture. If you have Keynote set to save files as Packages, you can right click the file in the Finder (or control click) and then select Show Package Content. This will show you all the files that make up your Keynote and you can copy the pictures out of there into a new folder. Finally, if you can't find them any other way, you can select and copy the picture in Keynote, then open Preview and command-n (or File Menu>New from Clipboard) and then save the file to where ever you want so you can find it.

  • What is the name of the folders which are your backup of Itunes library? I am recovering from a virus, have no workable desktop in Win XP, but can search and find files and folders. I would like to move these backup files to a new computer

    what is the name of the folders which are the backup of Itunes library? I am recovering from a virus, have no workable desktop in Win XP, but can search and find files and folders. I would like to move these backup files to a new computer, authorize it and sync with Iphone 3Gs and Ipod 5th gen.
    I

    I second the whole iTunes folder approach.
    If for some reason you have split the media folder from the library files then the media folder needs to restored to the same path it used to have while the library files can be copied into the music folder of your new profile.
    If in dobut, backup up the entire Documents and Settings folder before wiping the infected drive, but be selective about what you restore as many viruses drop active components capable of reinfecting the compuer in the temp folders and internet caches. It is much easier to backup more than you need than to discover after the fact that you no longer have access to some vital project you'd been storing in a folder on the desktop.
    tt2

  • Is it possible to change the name of the characteristic after the PA is act

    Is it possible to change the name of the characteristic after the PA is activated?
    If yes what should I do?

    Hi,
    yes its possible and it works in the same way as the creation of a new characteristic / assigment to an up- and running operating concern.
    Thats because the "name" of a characteristic is not stored in a text table but it is the field label of the data element.
    Search in the SDN forum if you are unsure how to do that.
    Best regards, Christian

  • Is it possible to change the name of the application in webdynpro

    Hi ,
             I created one application with 2 views .It is running perfectly.Now the problem here is i want to change the name of the application.Is it possible to edit the name of an application
    Regards
    Padma N

    hi,
       I want to create an application with name Z_XXX but while running the application it has to show only XXX at the top of the Application window
       i dont think which u have mentioned is possible or Even i may be ignorant in that.
    better give the Application name as XXX instead of Z_XXXX
    Thanks and reagrds
    Fistae

  • Having the possibility to customize the name of the backup directory

    Hello,
    New user of lightroom v3.3, i noted the impossibility to customize the name of the backup directory.
    it's a plain full text with "importé le 10 janvier 2011" for example wich is not the best way to store to retrieve old photos.
    is it possible to have à traditional "importé le 2011-01-10" for example so that the directory will folow theimselves hystoricaly?

    I agree that would be preferable.

  • I would like to share my photo's titles and descriptions in the photo streams into which I place these carefully labeled photos. I do this so clients can see the names of the things they're swiping through. Is this even possible?

    I would like to share my photo's titles and descriptions in the photo streams into which I place these carefully labeled photos. I do this so clients can see the names of the things they're swiping through. Is this even possible?

    No.  Send a feature request to Apple via http://www.apple.com/feedback/iphoto.html.
    OT

  • I can sometimes connect to my Wi-Fi network, but sometimes the name of the network doesn't even appear when i try to find available networks. Is it possible that my software is too new for the network?

    I can sometimes connect to my Wi-Fi network, but sometimes the name of the network doesn't even appear when i try to find available networks. Is it possible that my software is too new for the network?

    It may be your router is to old. Good read:
    http://www.wi-fiplanet.com/tutorials/7-tips-to-increase-wi-fi-performance.html

  • I can't remember the name of the game where you have to throw a stickman off a ledge and cause as much damage as possible, can anyone help me please? i'm sure the start screen had the yellow hazard sign...

    i can't remember the name of the game where you have to throw a stickman off a ledge and cause as much damage as possible, can anyone help me please? i'm sure the start screen had the yellow hazard sign...

    Can't help you with that. But perhaps you can help me remember the name of my favorite book from when I was a child. The cover was blue.....
    Seriously, try googling something like "iphone game stickman".

Maybe you are looking for