Moving mouse moves the entire screen

When I move the mouse the entire screen moves in the direction the mouse moves. Tried different mouse, keyboard, restarting. Nothing works. The computer still works fine, it's just the moving screen won't stop

Open the Universal Access pane of System Preferences, click on the Seeing tab, and turn off Zoom.
(31635)

Similar Messages

  • Track pad moves the entire screen

    I have a one year old who managed to push down most of the buttons on the keyboard (on the bottom left side) while clicking the track pad. Now whenever I use the track pad (by sliding one finger around) the whole entire screen moves and appears to be zoomed out. How do I undo my this change?

    I turned off the zoom on the universal access and keyboard and mouse pane and it still is zoomed out and the whole screen will move when I slide my finger (the screen moves in the direction that I slide my finger). This occurs even when the only thing on the screen is the desktop, and not a program like Safari. What do I do?

  • I have an issue where coloured dots (small squares) appear on my screen and it gets to the point where the entire screen freezes although the mouse still moves but nothing works and I need to turn the computer off at the switch. Any ideas?

    I have an issue where coloured dots (small squares) appear on my screen and it gets to the point where the entire screen freezes although the mouse still moves but nothing works and I need to turn the computer off at the switch. It doesn't happen all the time but is very annoying. Any ideas?

    Reset the SMC and PRAM, if the issue continues then you likely have a failing GPU (hardware) that requires repair. To be sure take it in and have it professionally assessed.
    Intel iMac SMC and PRAM resets

  • When I go to a link all is fine except the link takes up the entire screen and there is no way to move out other than control alternate delete and brining up task manager to exit out of firefox, help

    again, I am able to use search of firefox to get to a link but then all the tool bars from my operating system are no longer available as the link takes up the entire screen (there are no firefox toolbards either so I can't shrink the page etc).. Thus I cannot move around and am stuck with no option but control alt delete to get to task manager to close firefox.

    Thank you so much...
    1. I don't have that fat format I checked as I saw this on another answer...BUT...you are right the project was very bloated and I made a new project with the sequence and moved a bunch of projects off to an outside drive and things are flying again...this effect "twirl" was on three clips and this seemed to be creating a problem along with it being a bloated project. Don't know why this effect renders easily then the next second doesn't it's on three clips on the entire project and one or another might not render all of a sudden.
    2. I understand what you said about the timeline export...I decided to export the sequence without the matte it was nested in and that sequence did have the chapter markers on the timeline and they again didn't export??? I'll look tomorrow at this it makes no sense if what you're saying is how to do it...the final cut pro book said they should have showed up if I export from the browser and that didn't work either.
    3. I then matted that output and rendered it to output but I am worried this will degrade and compress the sequence more than I want by outputting the same sequence with current settings twice???...the couple of outputs I could make nested looked very good as this was one render...however, I tried doing a quicktime "current settings" with the dvd studio pro info still trying to export chapter markers and maybe it's my imagination but the output didn't look as sharp as just an output with just chapter markers???
    r. I did look at the final cut pro book and it says that mpeg 2 movies will not read chapter markers anyway if you create one in compressor...if this is true it makes no difference if the quicktime output isn't having chapter markers show up. I assume when I go to author though I can put an mpeg 2 movie into dvd studio pro and create chapter markers at that point!! It seems weird it says it can do it with an mpeg 1 but not an mpeg 2 when everyone is using that for dvds.

  • Firefox is taking up the entire screen! I don't know how to fix it? I can't do anything now.

    Firefox is taking up the entire screen on my laptop. I can't see the search bar or the windows tabs at the bottom or anything. I think I accidentally pressed something to make it do this, but I can't fix it. Please help!

    Hi K-chan,
    It sounds like you've just put Firefox into [https://support.mozilla.org/en-US/kb/how-to-use-full-screen Fullscreen mode]. It's an easy fix though. You can just hit ''F11'' or move your mouse to upper right hand side of the screen and hit the maximize button. The article I linked you to has more details.
    Hopefully this helps!

  • CS6 problem. When I open the Mask panel, it takes up the entire screen width and the Looks controls disappear, Also, there is a new panel below the Mask panel that seems to have no purpose that I can find. The documentation says "Mask and Look panels - Th

    CS6 problem. When I open the Mask panel, it takes up the entire screen width and the Looks controls disappear, Also, there is a new panel below the Mask panel that seems to have no purpose that I can find. The documentation says "Mask and Look panels - The Mask panel is now placed next to the Look panel. WIth the masking and grading tools placed side-by-side, you can now work faster on the mask workflow." Is there a way to move, hide, or otherwise manipulate the panels for a custom layout? All the examples I can find on the Web show the Looks panel to the left of the Mask panel where the controls are available.

    Ok, here is what I have so far. Appdelete the iWork and reinstalled. Pages and Number work, but not Keynote.
    Now, I downloaded a couple apps that I need, and no matter what I did, the spinning ball came up and the download stopped till it unlocked itself. It is really frustrating because the download was not completed and whatever came through would not mount. Could this issue be the internet connection? Permission fix showed a lot of Airport issues. I will try to run permissions fix again.

  • When I go into iTunes on my Mac is recently takes over the entire screen and I can not get rid of it.  Is there a setting I can change to have it work the old way?

    When I go into iTunes (the latest update) now, it takes over the entire screen is difficult to remove.  Is there a setting I can change in it to have it behave the old way?

    I presume you are runnning iTunes on either an OS X 10.7 or OS X 10.8 system. Move the cursor to the very top of the screen so that the menu bar appears, then click the blue box with the arrows at the very right corner of the menu bar, or press Shift-Command-F. That will switch iTunes back to a normal window, which it should then remember for future launches.
    Regards.

  • The picture from my AppleTv on my Samsung LCD TV doesn't fill the entire screen.  It is only a strip across the screen

    The picture on the screen when viewing movies on Apple TV on a samsung lcd screen is only a strip across the screen and doesn't fill the entire screen.  Any settings suggestions?

    If you can get to the settings on the AppleTV attempt to adjust the resolution settings to something more appropriate.
    This may help
    https://www.apple.com/support/appletv/essentials/

  • Blurring the entire screen in a WinForms application

    Hello,
    I am trying to come up with a way to blur the entire screen (all forms visible) on a WinForms program. I am using C# in VS2005. I have tried the code from this link:
    .net - C# dialog form with blur background - Stack Overflow
    ...and it works quite well, however it only works for the active form, not for all forms visible. How would I adapt this code to work for the entire screen? I looked at
    the Application.OpenForms[] controls, but I can only do one control.
    Is there a more elegant way to do what I'm trying to achieve?

    Hi friend,
    Like your title mentioned, this is a WinForms application case. So I moved your case to Winform forum for better support.
    Best regards,
    Kristin
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Suddenly my screen isn't filling the entire screen on the sides, what happened?

    suddenly my screen isn't filling the entire screen on the sides, what happened?

    Turn off Zoom from the Universal Access and Keyboard & Mouse panes of System Preferences.
    (76635)

  • How to set a background image to fill the entire screen on any device in a spark mobile application

    Hi,
    I started developing a mobile application with Flex.
    I'm trying to set a background image to fill the whole screen. I've been stucked at this point for days now. I tried everything and no solution seems to work for me.
    I'm using a TabbedViewNavigatorApplication and i need to set some background images on views.
    I need my image to fill the entire screen on any device. i don't need to mantain image aspect ratio,  just need it to be fullscreen. This seemed to work when setting a custom skin on the TabbedViewNavigatorApplication, however this blocked all my views for some reason and all components contained in view became invisible.
    Can you please tell me how can i achieve this?
    Kind regards,
    Dan

    Basically you need a larger image which can accommodate any device. The trick is to show only what each device can display, so therefore some clipping will occur based on device. Have something centered and towards margins have a  gradient or just plane colors that way the stuff in the middle will be visible on every device while nobody will care if you are clipping from the color fill.
    C

  • I just bought a Samsung S22B310B computer monitor and hooked up to my Mac Mini. I have my mac set to the 1920X1080 resolution but the entire screen (21.5") is not filled. It looks like non HD channels do on an HD TV. Used regular hook up not DVI.

    Just bought Samsung S22B310B computer monitor and hooked it up to my mac mini. I have my mac set to the 1920X1080 resolution but the entire screen (21.5") is not filled. How do fill the screen? it fills the screen on other resolution settings. I have it hooked up regularly and not to the DVI hook up. I'm not a computer savvy person please help!

    That monitor supports both (digital) DVI and (analog) VGA connections, so you should not need a converter or use a different adapter.
    You should use the Apple Supplied HDMI to DVI Adapter and a (digital) DVI cable to the monitor.

  • How do I get SD video (4:3 aspect ratio) to fill the entire screen?

    Any 4:3 video I stream has black bars on either side of the picture. I have a Samsung HDTV, and I can stream content using its own pc to tv streaming software and 4:3 videos fill the entire screen. Or if I play a DVD with 4:3 aspect ratio that will also automatically fill the screen. With the Apple TV I cannot make it fill the entire screen. Is this something to do with the signal being transmitted over an HDMI cable?
    Has anyone else had this problem, and if so how have you resolved it?

    I know it is displaying 4:3 video correctly, however I'd prefer if there was some stretching (non-linear) so that it fills the entire screen. Having 2 big black bars on either side gets very annoying. There doesnt seem to be an option to fill the entire screen when streaming from the apple tv. There are options when streaming from Samsung's own software (I don't want to use samsungs pc share manager as the apple tv's user interface is much better).
    Are my options restricted because the signal is transmitted through an hdmi cable? Seems to be what other websites might be suggesting.

  • I've never dropped my phone for the 7 months that I've had it but last night I was at a park and when I sat down at a table, my phone as in my pocket and I heard a pop. I took my phone out and the entire screen was cracked. what should I do?

    I've never dropped my phone for the 7 months that I've had it but last night I was at a park and when I sat down at a table, my phone as in my pocket and I heard a pop. I took my phone out and the entire screen was cracked. what should I do?

    Probably not, since user-caused damage isn't covered by the warranty. But you can take the iPhone to an Apple Store and see if there's anything they can do for you. A phone company store will not service your iPhone at all, to the best of my knowledge.
    Regards.

  • Template doesnt fit the entire screen in IE

    Hi
    I tried to use premade templates (both HTML and Flash) by inserting them in Dreamweaver. When I tried to preview in IE how it would look like, the template shows up fine, but it doesnt fill the entire screen. Right part of the screen is white.Does anybody know why it happens and how to fix it?
    Thanks

    Does the template have some sort of a <div> wrapper class? What are the margins set to? To get full screen there shouldn't be a width set in the css file to wrap your pages with.
    Hope this helps!

Maybe you are looking for

  • Links to other iWed Sites

    Hi Apologies if this has already been covered - a search didn't readily reveal an answer, if there is one. I have created an iWeb site, and for sake of layout etc. have several pages defined as a separate site within iWeb. When I create a link to tha

  • Wifi gets disconnected after sometime while watching youtube on iPod Touch.

    When I'm watching video on youtube, the wifi network suddenly gets disconnected after some time. Even when I goto settings->wifi, I'm unable to find the wifi network. However, at the same time I can find the wifi network and am able to browse interne

  • DES output size bigger than input size

    If I try the code below for passwords and data of each 8 bytes, I get encrypted data of 16 bytes. Why is this so? I thought with DES the number of output bits equals the number of input bits. Thanks, J�rgen static String A="DES"; private static byte[

  • I can't update to iOS7.

    Hello, When i try to update my iPad 2 via itself it says i should connect it with iTunes on my computer. I connect it, and it says i have to restore my iPad. I click "Restore" and agree to everything, and when it's almost done it says "Failed to rest

  • HOW TO MAKE THIS GAME MULTIPLAYER???

    its in java but i would like to know how to make it multiplayer so i can host a game for others over the internet http://www.nintendo8.com/game/321/tecmo_super_bowl/ theres the link to the game