Moving NWA from one WBS to another and consolidated costs under WBS

HI,
I'm restructuring the project by moving released NWA from one WBS to another to aling actual costs with new budget categories.
After moving these NWA I run the report and found out that WBS element summarize costs even if there is no NWA under this specific WBS.
What field should I enable to allow WBS elements recalculate costs according to new NWA under these WBS.
Thanks,
Minsk2000

Hi,
Run CJEN to reconstruct project database.
Rgds
Abhinay

Similar Messages

Audigy 2 zs - moved pc from one room to another and now no sound from speakers (headphones

As the title says,
I just completed moving my pc from one room to another. Low and behold I get no sound from speakers (just some stereo speakers with powered sub). I do get audio out of the headphones (fully disconnect headphones from front panel when attempting to get sound from speakers). I know this probably points to a faulty speaker setup but that's pretty straight forward and looks to be fine.
Anyone encounter this problem before or have any suggestions?
Thanks!

Mr. Jefferson, Thanks for the quick response!
A mystery! Usually, it's easiest to have FiOS patched into your home's cable TV wiring, so I'm curious why you don't have a coax router that provides you with the ethernet (internet) jacks. Some questions:
Do you watch TV from some other source (like satellite or cable TV) but are using FiOS only for Internet?
I have both fios tv and internet
You said 2 cables are going from your router to a box in the wall. What are the 2 ports labeled on the router?
One of them is just the main "internet" port I guess you could say while the other is just one of the ports labeled 1-4 (plugged into #2 I believe)
Is there any labeling on the jacks on the wall box? On the other box in your room?
On the wall box in this room theres labeling on the jacks on the wall box that says IN and OUT (in marker), while in my room there's the same box but with only ONE, unlabeled jack (I think there's supposed to be another jack but it seems to be closed/sealed off)
Do you know where the Internet jacks connect to? Like a patch panel or box somewhere in your garage or near where your FiOS/cable tv/phone service is? Somewhere these cables have to terminate.
I believe they somehow connect to this box in my garage (did some research and I believe it's called the ONT? and there's another box below it which I believe is the battery)
Hope this info helps!

Moving library from one iPod to another and from one computer to another?

I hope that this is a simple, if complicated, issue:
I have a new iPod Touch (well, it's 2nd generation, but for me that is new!), and an older classic iPod. The older iPod syncs with my old desktop computer, while my new one syncs with my laptop.
I'd like to merge the desktop-based library from my old iPod with the laptop-based library for my new iPod, so that I can retire the older device. Is it simply a matter of exporting the library from the desktop and importing it to the laptop?
Thanks, folks!

Hello DWaldo,
And welcome to Apple Discussions!
Is it simply a matter of exporting the library from the desktop and importing it to the laptop?
Yes. Simply copy the content from your old iTunes library over to your new laptop and then import it into iTunes. You can even use your old iPod to do this,
http://support.apple.com/kb/ht1329
B-rock

Moved InDesign from one computer to another and problems with that

Hi,
New to Adobe so please, if I'm posting in the wrong spot or the wrong way feel free to politely tell me where to go.
Using Windows7/64Bit
Adobe InDesign V8.0
We recently purchased this product for one of our users. Worked and had no complaints.
User's laptop exhibited signs of imminent departure soon after installation - replaced laptop with new unit and retained old laptop.
User immediately complained that some features were 'greyed out'.
Firstly drew my attention to the 'Paragrah Styles' in the toolbox or menu on the right hand side. User had created, what she refers to, as a shortcut menu on this panel on the right hand side.
Found a thread indicating method for repairing damaged preferences.
Backed up both the directories found under:
C:\Users\USERNAME\AppData\Roaming\Adobe\InDesign\Version 8.0\en_US
C:\Users\USERNAME\AppData\Local\Adobe\InDesign\Version 8.0\en_US
Copied same folders and content from old laptop and you wouldn't believe it but it worked a treat.
However, user had failed to point out that none of the other features were working also. Eg. Pages, Layers, Switches etc.
It seems that the options appear on this panel on the right hand side but you cannot interact with them at all. Whilst a number of different pages appear in the Pages tab, none are selectable
Any assistance would be gratefully received,
With thanks, in advance,
Martin

Hi,
Firstly apologies for posting a question then leaving it for so long. Illness can never be scheduled in :/
Secondly, Bob, you were 100% correct. Fonts were set to 125% and Aero was enabled. I reduced font size and also disbaled Aero and it immediately fixed the problem.
Now, the question is which one of the 2 was more likely the problem as I foolishly applied both fixes at the same time. The answer would be the font size as Aero was also enabled on the old laptop which was working OK.
Many thanks for the responses, many thanks for your help and tips my hat to Bob - well done.
PS I did originally do a full install onto the new laptop.
Martin

TS4036 I have moved from one company to another and they both use iphones I backed my phone up before it was shut down I tried to retrieve contacts from my PC it did not work will it work when I get my new iphone?

I have moved from one company to another and they both use iphones I backed my phone up before it was shut down I tried to retrieve contacts from my PC it did not work will it work when I get my new iphone?

I updated my iPhone onto my friend's MacBook
Why would you do that, and not on your own computer? See the hassle it caused you?
can he just email me the folder
Backup files are too big to email. Use FTP, DropBox, etc...
how do I then put all that data back into my current phone from the new computer?
How to restore iPhone: http://lmgtfy.com/?q=how+to+restore+iphone

Moving images from one library to another; or how to have 2 libraries open at the same time in Aperture 2

This may be something easy but for some reason I am having a hard time figuring this out. Basically this is the situation: I have a library on my MBP hd that I import pictures to when I am not hooked up to my external hd for the time being. The main library is of course on the external 2tb drive. How do I have 2 libraries open so that I can essentially drag and drop the pictures from one library to another? It would basically be like moving files from one project to another. Thanks for any help!

Always keep a backup of your original images, before you delete them. I make a backup right form the card, before I even import them to Aperture.
How are your images stored right now? Are the referenced or managed? On your big volume I'd consolidate the newly imported images, to be sure they are really inside the Aperture library before I delete any images outside the library.
but they have the little yellow triangle caution symbol on them and I can see them but not really edit them
That is a very typical problem, when you imported your images as referenced images then somehow delete or move the original master image files, that are stored outside the Aperture library.
Do you still have the original masters of the images with the yellow triangle that you cannot edit? In Aperture 3 you can point Aperture to the location of the master image file "File >Locate referenced image" - probably Aperture 2 has a similar command to let you reconnect your masters, if you still have them. Look into the manual.

Moving Image from one Review to Another?

I attempted to upload an image (open in Photoshop) to a specific review. However, I could not see the desired review in the Photoshop CS Review panel. Out of frustration - after attempting to "find" the desired review for several minutes - I uploaded the image to another review and then went online, using Safari, to Acrobat.com.
There is no visible means of moving an image from one review to another. There is a way of dragging one review (with all sub-images) to another location. But I can't see a way of moving a sub-image from one review to another review.
IF there is some "magic" that someone knows I would sure appreciate some education.

This works quite well for a single image review. I've moved them from one workspace to another. The issue is when a review has multiple images and you want to take only one of them from that review and move it to another review in another workspace; I can't seem to get that to work at all.
When I open a review and navigate to the desired image, then click in the lower left corner and select a new workspace to move the image to, it moves the entire review - not the single image - to the new workspace.
I guess I could delete the "part" from the workspace it currently exists in and then create it as a stand alone review, but then I won't be able to imbed it into another review as I want to do.
The source frustration here is that I can't get CS Review in CSPS5 to navigate to the desired workspace/review. I get "ALL REVIEWS" displayed but not the workspaces... Any ideas on how to display workspaces instead of reviews?

Moving Stack from one folder to another?

Is there a way to keep a stack together while moving it from one folder to another. When I grab the stack and drop it to a folder, I view the folder and the images are no longer in a stack. It would save me a lot of time if they would stay stacked. Am I missing something?
Thank you.

Well your code is unreadable because you didn't post it properly, but I'd guess you've fallen into the old multiple-delete trap in a new way. It's like this:
To start with you have messages numbered 0, 1, and 2, let's say. So you write a loop that lets i run from 0 to 2 and delete message number i in the loop. What really happens? The first time through the loop you delete message number 0, after which you are left with messages numbered 0 and 1. The second time through the loop you delete message number 1, after which you are left with message 0 only. The third time through the loop you delete message 2, which isn't there and you get that message.
That's just a guess, I didn't have the patience to read that ugly unformatted code. There are two ways to do the multiple delete properly, if that's actually your problem: (1) run the loop upwards from 0 and always delete message 0; (2) run the loop downwards from N-1 to 0 and delete message i.

Moving personalization from one instance to another.

Hi All,
Could anyone guide me with the steps of moving personalizations from one istance to another..
I tried this syntax..
FNDLOAD <userid>/<password> 0 Y DOWNLOAD $FND_TOP/patch/115/import/affrmcus.lct <filename.ldt> FND_FORM_CUSTOM_RULES form_name=<form name>
what could be the filename.ldt location,
should i execute this from putty on unix box...
Regards, Ashish
Edited by: Ashish on Aug 30, 2010 9:59 AM

Ashish,
I am followin that document, but it does not tell me where do i execute the script.. Please if you could..Run the command on the server as applmgr user and after sourcing the application env file. You can run the command anywhere provided that the directory is writable by applmgr user.
Thanks,
Hussein

Moving Itunes From one computer to another

HI,
Can anyone offer advice for moving Itunes from one laptop to another? The original laptop that has my itunes on it, has broke, it froze and will not operate. Rather that lose all my purchased music and playlists i would like to swap it to another laptop. Can anyone advise if this will be possible and how to do it? Both laptops have windows XP installed
thanks
Arlene

Hi
I am having a similar problem- when I record from Itunes to a cd it only works in "Data cd" format in the advanced tab. That's okay, but when I re-insert the cd and try to import it, it doesn't show anything- it plays in Itunes okay. There aren't any little boxes to check for selecting any songs and if I try to use the import function, it shows as blank.(file type shows as .txt) I am using Itunes 6- would Itunes 7 help this?
thanks- I have a lot of music to transfer and this is a problem.
Max

Moving tabs from one window to another makes the new window vanish. I have hot corners enabled so when I move up to the right corner of my display I can see all my open windows but when I click on the tab that I moved to make it its own window it vanishes

Moving tabs from one window to another makes the new window vanish. I have hot corners enabled so when I move up to the right corner of my display I can see all my open windows but when I click on the tab that I moved to make it its own window it vanishes

I came up with an alternative solution.
Instead of actually trying to move the JInternalFrame from one JDesktopPane to another, I added a single, maximized JInternalFrame to the left side. When one of the right side frames is to be docked, I merely copy its ContentPane to the single JInternalFrame on the left, set the original to be non-visible, and adjust the properties of the JSplitPane to make the "docked" frame appear.
When the "close" button on the docked frame is pressed, I simply undo this procedure to "undock" the frame and redisplay it on the right-hand side (with its content intact from the docked frame, but in its original position).

PSE12 Organizer - can you copy photo from one folder to another and import copy into Organizer and still have original in other folder

I have been using folders to organize all my pictures and I will copy photos from folder to folder, often having them in 2 or 3 folders based on use. I tried to copy a photo in Organizer PSE12 from one folder to another and you can only move it, that means I can only have one copy of the photo. That is fine if I am using tags and want to search for it, but I want to have mult copies in mult folders. Organizer will recognize that it is there but it won't import it into the new folder. Until I move it, it stays in the original folder. I can drag it out of Organizer and drop (copy) it into a new folder fine, but it won't show in organizer in the new folder. Is there any way to copy and have multiple copies show up in multiple folders?

Hi,
The organizer works on the principle of not having multiple copies of the same photo.
If you have multiple copies spread in different folders, then making changes to one doesn't affect the others. The use of tags and albums are there to give different views of your photos.
You can't have multiple copies with exactly the same name even if they are in different folders. You could select a photo and duplicate it (File -> Duplicate) and then move the copy into a different folder but the name will be different.
If you want different folders for a specific reason, it is possible to use albums to collect the group of photos and then export them to a new folder outside of the organizer. You can also rename on export which is useful if you want to arrange the photos in a specific order.
Hope that helps a bit.
Brian

Can you move your notes from one iphone to another and how?

Can you move your notes from one iphone to another and how?

You can do this a couple ways. If you are using MobileMe, notes is one of the options for synchronization and that would be automatic. Another way is to backup your iphone to iTunes, this backs up essentially all the information on your phone (except for music) and if you restore the other iphone to the image of the original your notes will be transfered.

How can I move someone's hair from one photo to another and place it on another person?

How can I move someone's hair from one photo to another and place it on another person?

Duplicate post.

How can I move someone's hair from one photo to another and place it on another person? I have gone through every instructional video you have and have not been able to master this

How can I move someone's hair from one photo to another and place it on another person? I have gone through every instructional video you have and have not been able to master this

Open picture B, the one you wish to select the hair from to add to the picture.
Use one of the selection tools, e.g. selection brush, lasso tool, to select the hair. You will see an outline ("marching ants") once the selection is complete
Go to Edit menu>copy to copy the hair to the clipboard
Open picture A, then go to Edit>paste
Use the move tool to position the hair from picture B.
In the layers palette you should see picture A as the background layer, and the hair (B) on a separate layer.

Moving NWA from one WBS to another and consolidated costs under WBS

Similar Messages

Maybe you are looking for