Moving of stock
Gurus,
I am having a material in warehouse as unrestricted use,for which QM view is activated.I now want to move the material from UR to quality.The system is not allowing to move the material from UR to quality.It is giving a message
Change the inspection stock of material B1234 in QM only
How to move the material to QI stock and also to blocked stk.
Hi,
Activate 08 inspection type and do a transfer posting using movt type 322.
Regards,
Tushar
Similar Messages
-
Hi,
My problem is to find out slow moving project stocks. Report MC46 shows only slow moving normal stocks and project stock is not included in this.
ThanksHi Gaurav Shah,
If you are procuring for project stock means, the material is for direct consumption.I think its not logical to see it in terms of "slow moving stock" category.
Hope I am right and it will be useful and give you some insights. -
Is there way of moving a stock balance from the G/L in the account determination to a new one.E.g for valuation class 1000 you have got g/l 100000 which has got a balance of $1000 but you now go and change G/L to be 110000 for the same Valuation class but you want to carry that balance (history)to a new 110000 and start inventory posting against it going forward,
seeing that the G/L is set to post automatically.Hi,
Do Return Delivery if GR posted and then Change your desire G/L Account in OBYC then you do post GR with PO.
BR
govind -
Warning when moving allocated stock to blocked stock
Dear all.
we are facing a problem with our quality / mm flow. We have materials that while in stock need regular quality inspections (every 72 hours) .
Batch is inspected and passed inspection and allocated to a sales order / delivery but will only be shipped in a few days. Then the batch is inspected again and does not pass inspection. The inspection people move the material from unresticted to blocked status.
However the delivery is goods issued and send to the customer because the quality inspection people don't get a warning that the batch is already allocated to a sales order when they do the goods movement into blocked stock.
Anybody has a sollution?
Regards,
CvMHi Lakshmipathi
thanks for the info. However if I understand correctly this means that every batch needs quality inspection before PGI and that is not the case.
Every 72 hours the batch will be quality inspected. In most cases the delivery and the PGI will take place within the first 72 hours. However in some exeptional cases the inspection will take place between Del note creation and PGI (not on purpose, just the 72 hour boundry, the quality inspection people are not aware of the delivery)
At that time the batch is already allocated to a delivery yet during the quality inspection the batch fails the qualifications and will moved to blocked stock.
The people who move the batch into blocked stock need the warning that this batch has been allocated to a delivery so that it can be stopped before the trucks leave our property.
Regards,
CvM -
Slow Moving/Dead Stock Report
Hi Guys
BEsides T.COdes MC46 and MC50 what other reports that are available on SAP to give the same information and also their Current Stock Balances
VishnuHi,
Why do you need other reports?
What is it that these reports cannot provide?
If we can know what you want from the report we can perhaps suggest options. But these two reports are designed to provide the information relating to slow / dead stock and so they should be very useful?
Steve B -
Moving the stock from quality to unrestricted.
Hello Experts,
This is regarding QM issue.
in inspection lot certain lot quantity is entered in quality and it is not cleared.
the system status for that lot in QA03 is UD ICCO PRII STUP
now the question is how to clear this one.
even i checked for inconsistency,but there is no inconsistency exits.
kindly tell me how to proceed further and solve this issue.
Regards,
santosh.Hi Santosh, Yes no problem. You can post.
You have now identified the correct lot.
Select this lot and click on execute button. Then go to stock posting tab and post the remaining quantity to unrestricted use.
Itu2019s absolutely correct to post the stock against this lot.
In fact we can say earlier selected lot was incorrect as it was not having status ending with SPRQ or SPST. I explain this to you.
For material XYZ, 5 inspection lots are created containing 20 Qyt each (say lot numbers are 1,2,3,4 and 5). When you look at MMBE, you will see that quantity 100 is lying in quality inspection which is the sum of all lots quantities.
Now one by one you go on posting stock to unrestricted and giving UD. Accidently you gave UD for lot number 3 without posting the stock. Now system will show 20 Qty in quality inspection in MMBE. Here the first task to identify the correct lot against which we did not carry out stock posting. In order to identify this correct lot number against which stock posting was not done, we execute QVM2 transaction. Here lot number 3 has status SPRQ i.e. stock posting required. If you try to post the stock against lot other than 3, system will definitely throw error because it was already posted.
Hence the output of QVM2 always gives the correct lot against which stock posting is not done.
Regards,
Anand Rao -
Moving the stock to inspection to unrestricted
hi,
i completed the flow from gr to destination bin flow but the stock remains in quality inspection not in unrestricted use. how to move the stock from quality inspection to unrestricted use.(without changing the bin number)
Regards
muthuramanHi Muthuraman,
You want to transfer the stock from quality to unrestricted. you may follow the below process:
1, do transfer posting of the material from Quality to unrestricted in MB1B with 321 .
it will generate the posting change no.
2. create a Transfer order in LT06 with respect to the above material document no.
it will put the stock in interiam storage type 922.
3. confirm the TO.
hope this will help.
regards,
Anubhab -
Hi All,
May i know the T-Code to list Slow Moving, Fast Moving materials & also for ageing of materials.
Regards
RangHi Rang,
MC50 looks at the stock level for a material over a period of time and
identifies the lowest level that the material reached. That lowest level is
the dead stock quantity as, in theory, that stock was not required. It
works on the principle that in an ideal world scenario you would maintain
zero stock sitting in the warehouse because you were able to plan such that
every day you receive / produce the exact amount that you require to meet
all customer requirements with no surplus. An example would be that if you
met all demand over a 3 month period and the stock level in that time never
dropped below 500 then that would be the dead stock level as throughout the
period you supposedly could have had 500 less stock and still met all
requirements.
MC46 simply counts the number of days since the last issue against each
material - the more days the slower moving the stock.
Both the reports have value in that they can highlight problems which need
addressing - such as excessive stock or unpopular lines - but the results
they provide do need to be considered with a degree of caution...
Top-of-head examples could be that zero dead stock in MC50 is not an
achievable target if there is daily demand and the warehouse works on a FIFO
basis with a 2 day minimum to receive and then pick, and in MC46 materials
that are very seasonal will obviously show unfavourably at other times of
the year.
Hope its useful
reward points if deserved
Cheers!!!
Twinkle -
Custom Report for slow and fast moving items
Dear Xperts,
My client wants to develop a new report for slow and fast moving items, I checked the std report MC46 however as per std SAP design this report does not consider the special stock like project stock (Q)...could you please help me to know how can develop this new report with following input and output fields?
Input fields:
Plant
Material
Material Group
MRP Area
Special Stock Indicator
Special Stock (Type)
Output Fields:
Material
Material type
Material group
MRP Controller
MRP Area
ABC indicator
Material price
Category field – Slow, Fast, Non-moving
Current Stock
Last Issue Date
Thanks in Advance
Regards
RahulDear Rahul,
If you required project stock and consignment stock with valuated stock report in same place you need to generate new info structure as given below link. Or you can go with customized report with abaper.
Info structure validation
Regards
Sanjeet Kumar -
While creating the Transfer Order system is not picking Sale order stock?
Hi All,
In the B2B process the system is not picking the stock from from sale order stock while creating the transfer order? Please suggest.
Summary : Here we are creating the PR in the sale order and STO is created using the same PR to procure the materials from the WM plant to sale order plant. Since here intialy we are moving the stock to our sale order in WM plant and then picking the same. But while creating the Transfer order system is not picking the sale order stock in WM plant.
Regards.C S Javali
Check in schedule line in transaction flow whether Transfer Req /assembly is checked or not
Regards
Pradeep -
Intercompany Stock Transfer with WM
Hi,
We are doing stock transfer between companies.
The steps we are following are
1) Purchase order created with order type NB.
2) Outbound delivery create which moved our stock to intrerim Storage type 916
3) Inbound delivery is created to receive material in destination Plant
4) While put-away the material , system trying to Pick material from interim storage type 902.
But I was expecting that either at the time OBD system will place stock to 902 interim Storage type OR at the time of inbound -putaway system will pick the material from 916 (instead of 902). But actually it is not happening.
Therefore my question to how to get move stock from Storage type 916 to 902 OR how to adjust inventory between 916 and 902.
Presently at my end , at the time of Put-away material into destination plant system is trying to pick inventory from 902 where no inventory is available and therefore prompting an error "negative stock not allowed"
regards
Shrey
Since no inventory is available is there in Storage type 902Hi Anantharam,
The 'Allow negative stock' for the interim storage type 902, is active and still I get the same error.
For the same scenario, system is able to create a quant for ST 902 and another quant for the destination storage provided I choose a storage location which is not HU managed.
And the same scenario works for delivery type NL (intra company) & vendor purchase.
The problem what I face is only with delivery type NLCC.
As a work around, I am taking stock in to a non HU managed S.Loc and then thru transaction VLMOVE , I move this to a HU managed S.Loc. But this is not the right solution
Please can you giude me were could the error be, and after outbound delivery from the sending plant are we first to take the product into a non HU managed S.Loc and then transfer to a HU managed S.Loc
Appreciate your help
Regards
Prakash Govindarajan -
Help on transferring goods from blocked to sales order stock
Hi Gurus
i need your help in this urgent production issue here is the details
our scenario is make to stock, when delivering and shipping against sales order, the user had some issues in t-code VL10H,
so user only physically finished the delivery and shipped it, but did not execute it in SAP,
so the user has put the stock in blocked status against these sales orders.
can you help me in moving this stock from blocked status and issue against the sales orders in SAP so that we can perform delivery in SAP. and close the sales orders
appreciate if you can explain the details steps and movement types and t-codes
thanks a lot in advance for your help and repliesChakri,
You need to read the book on R/3 System SAP Strategies guide to MRP Planning and also Product Costing let me know if you need any help on this.
Saleem
Edited by: SYED SALEEM on Mar 9, 2008 6:05 PM -
Issue in WM enabled with HU (Transfer of stock frm Quality to Unrestricted)
Hi,
We've a scenario in such a way of both WM with HU engagged together.
Transfer of a Material from Quality to unrestricted stock type using transfer posting.
1. in MB1B using mvt 321, stock of Matl A with qty 20 has been transferd from Quality to unrestricted.
2. Due to HU mapped, an OBD for posting change had been created.
3. wrt OBD, matl get packed,(as per packing instruction) which is identified with the HU no.
4. Subsequently a TO had been created and confirmed.
as of this stage the stock view in IM & WM is as follows:
IM
Unres -
nil
Quality --- 20
Due to effect of PCN, TO has been created to transfer the stock catogry within the same bin
WM
Bin 1 (Q) 20 --- 922 (Q) 20
922 20 --- Bin 1 20
5. Then as per the process of completion PGI has to occur so as to nullifying the the -ve stock in 922 storage type
so the stock levels will be
IM
Unres --- 20
Quality --- nil
WM
Bin 1 20
Issue case :
A mannual TO has been created moving the stock from Bin 1 to 922 , without doing step 5 (i.e w/o completion of PGI).
This lead my stock figs as
IM
Unres -
nil
Quality -
20
WM
922(Q) 20
This also causes storage unit status as " To be Picked". leads to stuck up to proceed further.
We also tried to do mannual TO to transfer the stock from 922 to BIn 1. Due to unavailabilty of the stock system throws error as -ve stock is not possible for 922 Storage type..
Seeking experts to help out this issue if possibly w/o any customising settings.
Regards,
Prasanna
Edited by: prasanna govindarajan on Sep 22, 2010 2:55 PMDear Venkat,
There is a tick mark in post to inspection stock indicator thereafter inspection lot tab in qa32 or qa11 is not activated.
Secondly, this is a stock item.
Thirdly, No PS module is implemented in my client
I think the user has posted the stock through MB1C with Movt.Type 503 into quality stock.At the time of this posting the 05 inspection type is not activated in QM view of Material Master thatswhy system does not created any inspection lot for this.
After some days,with out stock posting from inspection stock to unrestricted stock,he has activated 05 inspection stock for the first time.
Pl.suggest any possible solution .
Prashant -
Hello gurus,
I would like to creat a report on slow-moving items in LIS, similar to report RMCBLH30 (TAC MC46).
But in 'my' report I would like to see only those slow-moving items in stock. RMCBLH30 unfortunatelly gives my all slow-moving items, even those with quantity = 0.
Could someone please give me a hint on how to do this? Are there any good tutorials in building LIS-reports?
Thanks in advance
AliciaHi,
Please check the last date when any of your stock movement had an accounting impact like GR, GI etc and see whether the data tallies
In MC46 try for double line display tab. It shows last movement date.
Also, check for Detailed Display for each material. It will show the details based on which it is picking last movement date and No movement since days.
From this details you can make out the date which it is taking as last movement......
MC46 simply counts the number of days since the last issue against each
material - the more days the slower moving the stock
If you want to generate a Z-report please take the help of technical consultant...
regards,
Patil -
Project Stock - Material document Cancellation
Hi
Iam facing Below problem, Pl help me to resolve,
I done GR for Project stock Material to Q.I, then done usage deceision from
Quality and moved to unrestricted stock.
Now i want to cancel the GR material document, When iam trying in MBST for
the material document no, Iam getting error message that deficiate of stock in
Quality inspection.
How should i solve this problem , Pl suggest me asap.
MMActually you have moved the stock from QI to unrestricted so there is no stock left in QI so you'll get a deficit error.
If you want to reverse that GR you need to move that stock back to QI from unrestricted stock and then do the reversal.
Regards
Noopur
Maybe you are looking for
-
Reports Multi-tier server from Dev 2000:v 1.6.1 don't start on solaris 8
Reports Multi-tier server from Oracle Developer 2000:version 1.6.1 don't start on Sun Sparc Solaris 8, it writes: Segmentation Fault (core dumped). What i have to do?
-
Hi, I am working on updating picture of user profile in sharepoint 2013. I am getting error "exception has been thrown by the target of an invocation" while creating Thumbnail at the below line. "file = (SPFile)mi_CreateThumbnail.Invoke(null, new obj
-
Is there a way to change the drop shadow default in FCP? It seems everytime I choose to use a drop shadow I have to set the parameters different from the default. I always use the same settings.
-
My source file is in the format - <b>Parent</b> <b>Child</b> Valve Belt Belt Conveyor The expected hierarchy in MDM is - <b>Valve</b> |_______<b>Belt</b> |________<b>Conveyor</b> How do we create this hiera
-
A stepper motor attached to PCI-7334 travels in same direction for both +/- input
Hi everyone, I'm seeing some bizarre behavior on my system and was hoping you could help me out. I have the PCI-7334 stepper controller installed and running on my system, with 2 axis-s connected. Axis 1 operates as expected, running one direction fo