Moving or changing project files

How to move files from DEV to prod and vice versa?
please help
thanks and regards
lu

Hi,
Could you please tell whether you are using BPEL (OR) OSB?
Thanks,
SV

Similar Messages

  • Changing project files programmatically

    WE have lot of project files in our solutions and we want to write small tool which will check if project files contains only what they should contains. E.g. they don't have TargetPlatform set to AnyCPU etc. Are there any APIs and components available which
    are able to read csproj files and provide corresponding object model ? We are not interested in solution where we need to parse project file our self as standard xml file et.

    >>Are there any APIs and components available which are able to read csproj files and provide corresponding object model ?
    Not any public ones but please refer to the following page for more information about how you could parse Visual Studio projects and solution files:
    http://stackoverflow.com/questions/707107/library-for-parsing-visual-studio-solution-files
    Please also remember to mark helpful posts as answer to close your threads and then start a new thread if you have a new question.

  • Moving an iMovie project file for editing on a different iMac

    Does anyone know if an iMovie project file started on one iMac can be saved to a usb drive or dvd/cd to be opened on another iMac computer to continue editing? What I have done before is go to: movies>iMovie projects>selected file and save the selected file to a usb drive. I also save the pictures and voice overs/music files that I used with the iMovie project on the same usb drive. However, when I open the iMovie project file on another iMac all of the work that I had previously done is not there. I end up starting all over. I would like to start my project at home and do any finishing touches on the second iMac in order to decrease the time I have to spend at the second location. Any thoughts would be greatly appreciated. Thanks

    When you move files to your second iMac, they need to be in the EXACT location. If you have your videos and photos in a folder on your desktop named "Movie Stuff," and you just throw them into a folder in documents called "Stuff" on your second iMac, iMovie will not recognize the files. You need to create the same path as the first iMac. In this case, you would have to make a folder called "Movie Stuff" on your second iMac's desktop, and move the files there.
    Hope this helped!

  • IMovie '11 project file won't open. Please help!

    My daughter put together a short film for a school project last night using iMovie '11 my brand new, out-of-the-box MacBook Pro (running X.6.8).
    I needed to have the identity updated at work today (including reinstalling my user profile used to create the project) - so I moved the iMovie Project files (as well as her original clips) to the hard drive, with IT guidance.
    However, now the project won't open. This is extremely distressing!!!
    I don't have the iMovie Events files. In fact, I don't recall seeing that file in the Movies folder. I'm not sure if this can be retreived (?) since the user doesn't exist.
    Any help and guidance would be most appreciated.
    Many thanks.

    Hi
    IT-guidance - can be anything from a Mac Guru to a PC-fanatics (and last sort they do not usually know)
    Moving iMovie Event's and Project's -
    • MUST NOT BE DONE on DeskTop/Finder as this cut's the connection to iMovie. Has to be done within the iMovie Application (reg. iMovie'08 or 09 or 11)
    • MUST BE TO A - Mac OS Extended (HFS) formatted hard disk - else material will break up in 4Gb blocks that eventually never can be mended (Need a Mac  Guru to do this - if possibly)
    UNIX/DOS/FAT32/Mac OS Exchange - Will not work for VIDEO (whatever flavor it is .dv, .QT, .mpg2, .AIC etc. - no GO) - for everything else YES - but not for VIDEO.
    You might try to move things back - and hope that iMovie now finds the material and then within the iMovie Application move it out to an external Mac OS Extended (HFS) formatted drive - prefer. FireWire one as USB/USB2 performs badly to me.
    Yours Bengt W

  • Moving an iMovie project

    I have a 1hr movie created using iMovieHD 6.0.3 on a G4 iMac that has no superdrive, and thus, no iDVD.
    I would like to author using iDVD on a separate workstation (quad core MacPro, running iDVD 6.0.3).
    Moving the iMovie project file is not an option (15GB size). Is there any way to 'export/share to iDVD' on a separate computer?

    Can the two computers be connected with a firewire cable? Of course they would need to be in the same place to do this.
    I've done what you are trying to do (after transferring the file over an ethernet network). A problem was that there were associated files that were not transferred. These included music on iTunes that was used as background music. These had to then be separately imported into itunes on the second computer. Anyone have a suggestion as to how to prevent this problem?
    DanK
    iMac G4 800MHz   Mac OS X (10.4.2)  

  • How to change default value in "Project file" dialog

    I'm new to Labview, and I've encountered an example with a dialog that allows to define a path to a file.  If I open the properties on the block diagram of this block the name of the block appears to be "Path Properties: Project file:"   The default value points to a different place than where the file installed and the VI won't run untiI I change the path.  If I save and open the file, it doesn't remember the change.  When the vi is running I can right click the text and there is an option to reinitialize to default.  I've rooted around all over the place and can't find where this can be set or changed.  How do I change this? 

    On the front panel, change the control to the desired value.
    Now, right click on the control, select Data Operations and Make Current Value Default.
    -Matt Bradley
    ************ kudos always appreciated, but only when deserved **************************

  • I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0.  Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file ext

    I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0. so I can reburn the films on a single BluRay disc. Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file extensions on the VOB files to MPEG but this was no help. Some of the VOB files contain numerous film clips but my software does not appear to be able to recognize them as such. I need to know if replacing my old Premier Elements with the new Version 13 would solve this problem or not. Any advice would be greatly appreciated!
    Bob

    Bob
    What do you have now.....
    What computer operating system do you have?
    We can go into the finer points of source and your intentions, but for now it would appear that you are using SD 4:3 source media to get to a HD 16:9 result. Lots to discuss in this regard.
    What was given to you on the DVD disc? DVD-VIDEO 4:3 or something else?
    If DVD-VIDEO on DVD disc, you should expect to find on the disc a folder named VIDEO_TS. That is your target for your video files.
    If you were given a DVD-VIDEO on DVD disc, then all you want from it are the video files, specifically
    VTS_01_1.VOB, VTS_01_2.VOB, and so on through that series until possibly getting to
    VTS_02_1.VOB, and so on. How many files you have beyond the VTS_01_1.VOB file will depend on the size of the DVD-VIDEO.
    Does the above scenario apply to you?
    The alternative might be someone giving a DVD disc (data disc) which contains just the VTS files mentioned which were copied from
    the VIDEO_TS Folder. So, you do not get the whole VIDEO_TS Folder, just the essential video files. Does this scenario apply to you.
    I see no need to replace your Premiere Elements 4 with a later version unless you have a huge project and need a later version that will be a 64 bit application running specifically on Windows 7, 8, or 8.1 64 bit computer.
    Consider...Premiere Elements 4 and if you have DVD-VIDEO on DVD....
    1. Place the DVD disc in the burner tray
    2. Open Premiere Elements 4 and set the project preset for NTSC DV Standard (assuming you are working in a NTSC setup)
    3. Go to
    Get Media
    "DVD, Digital Camera, Mobile Phone, Hard Drive Camcorder, Card Reader"
    "Adobe Premiere Elements - Media Downloader" and its Advanced dialog.
    Set the Source in the latter dialog for the drive which has your DVD disc inserted in its tray
    You should see your VTS_01_1.VOB thumbnail in the "Adobe Premiere Elements - Media Downloader" Advanced dialog.
    With this VOB selected, click on Get Media to get the file from there into the project.
    Should work fine.
    Complications may be involved if the people who processed your footage gave you something other what is described above.
    Please review and consider, and then we can plan our project strategy accordingly.
    Thank you.
    ATR

  • I moved the project files and now I can't get them back into iMovie 11

    I was working on a project but I ran out of disk space before I could finish it. Now, for this very purpose, I have an external hard drive with plenty of space on it. So I tried moving the folder with all my project files onto the external hd, and now iMovie can't find my project anymore. With iMovie '06 it was as simple as hitting "save as" and saving the project to the external hd, but I guess that's not complicated enough for the new version. Now I can't get into my project. I even try clicking on the actual project file, and it goes to iMovie as if the project was about to open, but nothing happens. So I fear I wasted a lot of time working on that project only to have to start all over because I ran out of disk space.
    Someone please tell me there's a way to get the project files open again. Thanks

    enoughsaid3 wrote:
    ... my external disk isn't formatted as Mac OS extended (journaled). I don't know how to do this,...
    that is a simple one and should be a routine after purchasing a new drive (in a Mac-only environment!):
    • on your Mac, Apps/Utilities you'll find Disk 'Utility'
    • on the left lane, you'll notice your connected hard drive(s)
    • select it, click on the 'erase' tab
    • NOTE: FORMATTING A DRIVE MEANS ERASING ALL CONTENT ON THAT DRIVE!
    that's why you should do it as step#1 after purchasing a new drive
    done ...-

  • I have recently moved all of my files to a larger external hard drive, but when I am reminder of an itunes upgrade it's still attempting to go to the old drive.  How can I change the settings so it automatically goes to my new hard drive?

    I have recently moved all of my files to a larger external hard drive, but when I am reminder of an itunes upgrade it's still attempting to go to the old drive.  How can I change the settings so it automatically goes to my new hard drive?

    lisacooney wrote:
    I have recently moved all of my files to a larger external hard drive
    How did you move these files?

  • Changing the display name of project file folders for TOC

    I'm interested in changing the display names of the project file folders for my TOC. For example, I want to name the folder "01-intro" so that it is short and lowercase. But I'd like the TOC to say "Introduction to the System." I know I can manually rename the folder in the TOC either through its properties or by right-clicking => Rename, but I auto-create the TOC occasionally and I don't want to have to rename every folder every single time.
    Does anyone know if there is a way to set a persistent property for the folder so that its display name in the TOC is different? I am using RoboHelp 9. I saw an option called "Detail" in the properties of the WebHelp layout in RoboHelp 8 that seems like it may have done that, but I no longer see this property in RoboHelp 9.
    Any assistance would be much appreciated. Thank you.

    I think the lack of response confirms that if you are going to use Auto Create, you have to accept the way it is.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • [svn] 4267: Change path to Assets.swf in eclipse . project file from full hardcoded path to use the FLEX_SDK variable as the base path .

    Revision: 4267
    Author: [email protected]
    Date: 2008-12-09 10:32:36 -0800 (Tue, 09 Dec 2008)
    Log Message:
    Change path to Assets.swf in eclipse .project file from full hardcoded path to use the FLEX_SDK variable as the base path. There is still an issue with Assets.swf not getting referenced correctly. If you import the framework project from Blazeds/trunk into Eclipse and get an error related to Assets.swf or that says "Unable to export SWC oem" for the time being try right clicking on the framwork project in Eclipse and selecting properties. Then in the properties panel, select Flex Library Build Path and then the Assets tab. On the Assets tab, check the check box next to Assets.swf and click Ok. This usually fixes the reference for me.
    Modified Paths:
    blazeds/trunk/development/eclipse/projects/flex/3.0/framework/.project

    Revision: 4267
    Author: [email protected]
    Date: 2008-12-09 10:32:36 -0800 (Tue, 09 Dec 2008)
    Log Message:
    Change path to Assets.swf in eclipse .project file from full hardcoded path to use the FLEX_SDK variable as the base path. There is still an issue with Assets.swf not getting referenced correctly. If you import the framework project from Blazeds/trunk into Eclipse and get an error related to Assets.swf or that says "Unable to export SWC oem" for the time being try right clicking on the framwork project in Eclipse and selecting properties. Then in the properties panel, select Flex Library Build Path and then the Assets tab. On the Assets tab, check the check box next to Assets.swf and click Ok. This usually fixes the reference for me.
    Modified Paths:
    blazeds/trunk/development/eclipse/projects/flex/3.0/framework/.project

  • HT3412 I recently moved all my photos from iphoto to Aperture. I had several iphoto books and cards in my project file. When everything was moved to Aperture I can't find any of the books or card projects. Are they gone or can they be restored?

    I recently moved all my photos from iphoto to Aperture. I had several iphoto books and cards in my project file. When everything was moved to Aperture I can't find any of the books or card projects. Are they gone or can they be restored?

    1 - without specifics I have no idea how to help
    2 - the question was "are you trying to use them in iPhoto? " - it sounds like you are - to do so you will have to export them from Aperature and import into iPhoto
    3 - for information on how to use them in Aperature then you need to ask about how to use Aperature in the Aperature forum as it does not involve iPhoto
    LN

  • Xcode Java - Moving the project file

    A problem that has bugged me for a while...
    If I create a new Java application using Xcode and later move the entire project file to another location, the references to the "aboutBox.java" and similar files retain the original paths. Thus, the project can not longer find them. I've tried a number of things to correct this but with no success. It seems so simple; there must be an easy way to accomplish it.
    Can anyone help me?

    In rereading my question, I don't think I was very clear.
    Of course I can make the project "movable" by changing the path for every file in it to be "Relative to Project" using using "get info". What I can't figure out is how to do this for the entire project in one step without have to change all of the files individually.
    There must be a way. Anybody?

  • How to change the file type from IMOVIE PROJECT to other types of file

    how to change the file type from IMOVIE PROJECT to other types of file??
    thank you very much for your help=]

    I am not sure what you mean, but once you make a project. Then go to the share menu and you can export the project to iDVD, itunes, mobileme, quicktime.
    Share export quicktime movie will allow you to export to a variety of codecs. What specific export are you looking to share the movie in? What is the final source that the movie will be displayed?

  • Sharepoint 2013, MS Project 2013 - Task List not updating when the project file is changed

    Hi
    I have created a SharePoint task list and timeline from a MS Project 2013 file on my PC. I have then created a new Project file from that task list which then places the new project file in the site asset folder and provides me with a synced copy. I now
    only use the SharePoint copy of the project file in my MS Project as any change I make to the project file should be reflected in the Task list and vice-versa
    However if I add some tasks into the middle of the project with MS project, the SharePoint Task list is not updated to show these additional tasks. If I open the SharePoint task list with MS Project - from the task list toolbar - the project file shows the
    added tasks.....so the MS Project file in the site asset folder is correct  but the tasks in the SharePoint task list is not being updated
    Anyone seen this before ?
    Thanks
    Geoff

    Hi Esben,
    According to your description, the error occurred when opening the task list with the content approval enabled in Project.
    Per my knowledge, when we enable the content approval for the task list, the field named Approval Status which is required will be created in the list.
    However, if a project plan doesn’t contain a field that is required in SharePoint, the plan won’t sync.
    The error occurs because of the required field Approval Status when the content approval is enabled in the task list, so we need to add the required field as a custom field in Project.
    More information:
    Sync with a SharePoint tasks list:
    http://office.microsoft.com/en-in/project-help/sync-with-a-sharepoint-tasks-list-HA102828524.aspx
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

Maybe you are looking for