Moving pages from one project to another??

I only keep one website per iWeb project. How could I copy a couple of pages from one iWeb project and move them to another.
Given I can only have one iWeb project open at a time.
Is such a thing possible?
Ben

you can use iWebSites: http://mistergregg.com/cocoadrillosoftware/iWebSites/
to merge the two projects then drag the wanted pages from one site to the other site.
be sure to make back up of your domain.sites2 packages before the merging procedure.
however, if those pages happen to be blog entries or podcast entries then you are pretty much out of luck because there is no simple way to merge them.

Similar Messages

[JS CS3] Moving pages from one doc to another

I'm having trouble understanding the pages.move method, when used to move pages from one file to another. With one ID file open, I want to create another file, and then move pages from the first file to the second. At this point, the new, second file is untitled. Must I save it first? Here is what I have so far...
var oldDocument = app.activeDocument;
var newDocument = app.documents.add();
// Move pages
oldDocument.pages.itemByRange(0,1).move(LocationOptions.after,newDocument.pages[-1]);
I'm having trouble figuring out how to reference both documents properly.

Dave, that was it! I didn't realize that the Move method actually "moved" the pages. I assumed it copied the pages, similar to the move pages dialog without the "delete pages after moving" option checked. But I see now that what I really want to use is the "duplicate" method, which will allow me to copy the page from a one-page document into another document. Thanks!

Moving pages from one document to another in preview

I have two PDF documents open with the sidebar on my desktop. I have moved a page from one document sidebar to another and then saved the document with the additional page. When I open the document the added page is not there. This is extremely fustrating as I have tried this all different ways. Any suggestios???

See my reply in this thread here:
Merge 2 pdf files into 1 ?: Apple Support Communities
The movie is still available, watching it may help, it shows a method for adding all the pages from one PDF to another. The general idea of where to drag in the destination would still apply for adding just one page.
Francine

Moving photos from one project to another

So, I'm painfully new to aperture but I was under the impression that if I drag and drop a group of photos from one project to another, it would MOVE the photos to the new project (as described here: http://documentation.apple.com/en/aperture/usermanual/index.html#chapter=5%26sec tion=14%26tasks=true). When I do this, the images remain in the original project and it does get added to the second project (in an album under the new project). When I try to delete them from the original project, it also deletes them from both the original project and the new album in the new project. When I "Undo" the delete, it restores the photos to both the original project and the album under the new project.
Am I missing something?

The problem is you are dragging them into an Album not a project.
If you drag them into the project they will be moved. If you drag into an Album they remain in the original project as well as appearing the album. (in the album they are really pointers back to the originals in the project)

Moving Subtitles from one project to another

To make work on a project more efficient, we started a project on one computer with only the film track for subtitling, whilst authoring the DVD on an other computer, another project.
So, how do we move the subtitles created in one DVDSP project into another project?
I cannot see that the subtitle stream creates its own asset, which could be imported into the authoring project, and DVDSP refuses me to copy the subtitles to past them into the "real" project and I find no export options which seem to apply.
Humbly seeking help.

Sorry Per - there is no direct way of moving the subs from one project to another, or exporting them directly as an asset. The very best advice is to construct subtitles outside of DVDSP as a text file which you can then import, edit, alter exactly as you want. I suspect it's beyond that point for you now, though!
However, if you use the app 'Subtitler' then you can export an item description of your DVDSP track and extract the subtitles from it in STL format.
Another thing to do is to export the track from one project as an asset and import it into the new project, but then replace the video and audio elements with the correct pieces that you need to use. It's a lot more messy than simply having a text file for the subs, but could get you out of a hole.

Moving Titles from one project to another

I want to combine several iMovie projects into one, in order to create a single DVD via iDVD. The projects are fairly simple - no music, just video, dissolves, and some text.
When I select all, and then copy and paste from one project to another, the titles do not transfer. The background for the titles - i.e. black spaces - do transfer, but not the text. It seems there's no simple way to move titles from one project to another. Is there a solution or workaround, or do I simply need to create new titles in my new, combined project? Thanks.

The simplest way would be to use multiple movies in iDVD. iDVD handles multiple movies easily and will help you set up a menu if you want. Just share your movies to the Media Browser. Then open iDVD and drag them into your iDVD project from the Media Browser in iDVD.

Moving Files from one project to another??

New to Aperture ..and wondering is there an easy way to move files from one project to another? Or to move from one Album one project to another Album in another project if the Albums have the same name?
thanks in advance,
Steve

schorney wrote:
New to Aperture ..and wondering is there an easy way to move files from one project to another?
Yes, simply drag-and-drop a thumbnail from a Project to another Project; or Option-drag-and-drop (one way copies the image, the other way moves the image).
Or to move from one Album one project to another Album in another project if the Albums have the same name
Although Albums can be located in Projects, Albums are really not "in" Projects as regards where the images come from. Each album is simply a virtual collection of pointers to images; the images pointed to can be located in multiple Project(s). So just drag-and-drop a thumbnail image from any project to an album to add a pointer for that image to that album.
Although it seems complex it really isn't. Albums are a very powerful organizational tool with essentially zero overhead. Try it. Create some test albums in various ways just to see what happens and delete the albums when you are done. Since Albums consist of just "pointers" we can make/delete them at will for any reason.
Note that Albums can be deleted with no warning message because Apple figures a simple collection of pointers is not that big a deal. Personally I think Album-deleting should have a (non-dire) explanatory warning message, because sometimes an album can consist of a complex collection of pointers.
Multiple Albums should never have the same name.
HTH
-Allen Wicks

Moving image from one project to another

Hi all. I'm sorry if this is simple to do, but I can't figure it out. I have recently purchased Aperture 3 and am trying to figure out how to move an image from one project to another. I had several photos on my camera, and imported them this morning into it's own project. Now, I would like to take some of those photos and put them in my "family" project, and some into my "dogs" project, etc. When I open up the new project, I can't find where I can move them to another project. I have to assume this is doable, but I can't figure it out.
Thanks in advance.
Dale.

Sorry to be a complete idiot, but here's my issue. When I open the original project, and then find the image that I want to move, I am unable to see any other projects (in browser view), so I have nowhere to drag them to. I hope that makes sense and you can help.
Thanks again.
Dale.

Moving table from one project to another project using metadata.

I have exported metadata of one table from project owb_demo and I want the same table in project Owb_demo_1 by importing the metadata. I am newbie . When we export it even store project info like owb_demo . How to change this things in metadata. When I try to import it gives error saying table already exists.
How do we migrate objects from one project to other using import and export of metadata.
thanks

Hi Vix,
Regarding using multiple enviornments in OWB there is a case study on "How to manage multiple versions of BI implementation". You can find it the OWB case studies on the net. This guide is a useful one.
One more thread you can look into in this forum - " How design with OWB", the link is below:
How to design inside OWB
Still if you want some specific explanations regarding this, better start a fresh new thread.
Hope this helps
Regards
-AP

Alternate layout created when moving pages from one document to another

I'm using CC on Windows 7 - I have 2 documents that I want to merge and make into 1 [I know people will want to know why I would want to do this - each document is the result of a different data merge - data merge can only handle one master page - so I have 2 datamerges - 2 files - and just need to merge the 2 files]
This used to work beautifully in ID 5.5 - now when I use the pages panel to move the pages to the other document - it creates an alternate layout - it is then very difficult for me to interlace alternating pages - - I use dot be able to just move the pages into place - but with eh 2 layouts it is behaving differently and in a way I do not understand. Is there any way I can get around this? or avoid the alternate layout and just have one. The 2 page sizes are identical so it is not a problem of varying size - the paragraph styles are all the same as well. I have tried to delete the alternating style but it will delete all the pages as well.
Thanks

Maybe its time for me to Replace my Preferences, because I also have 8.0.2, and I tried the same thing with two new documents based on the same preset - it still made an alternate layout. When the moved page is placed in the middle of several pages (say - after page 2, of 6 pages) all the pages after the inserted one become part of the new alternate layout. In this example, I had a six-page document, and moved one page of the other identical document to After Page 3 Here's the result

Library corruption after moving images from one project to another.

Hi,
I have Aperture 1.5 running on a PowerMac G5. I'm using an external disk (via FW800) for the library. The disk catalog has no problems.
Today I want to reduce the number of projects and move a few images between projects. There is one project with a few hundred files where I wanted to move a large subset to another project. I selected the images in the source project and dragged them onto the other project. Some processing happened and after a few seconds I got a dialog which said that some problem with the library happened and that I have to quit Aperture and restart Aperture with control-shift-option. There was only an okay button and the next (same dialog) appeared... and again/again... Finally I was able to quit Aperture and restart Aperture.
After restarting Aperture several images in the source project were grey with a question mark and a link icon in the lower left.
Looks like Aperture cannot move images reliably between projects. That would be a huge bug.
Regards,
Rainer Joswig

Hi Rainer,
Have you tried again to rebuild your Library
(Option/CMD on relaunch)? THis might fix the grey
images in the souce location. Where the images which
were dragged to the other Project OK? What hapens if
you make an adjustment on one of the grey images?
Does it render the thumbnail?
Also, check you task manager to make sure it's still
not trying to render the thumbnails. Though, it's
most likely not the case given the question mark on
the image.
I did the library rebuild now. The problems seem to have gone.
Then I also copied a few more pictures between projects. So far
the problem has not shown again.
Best Regards,
Rainer Joswig

Moving Composition from one project to another?

Hi
Is there any way to move a Composition from Project A into Project B with all it's layers,Keyframes etc...?
I'm using AE CS3 ... never had to do it before ... but never say never hey?
Thanks for the help
Lee

You might also want to do a Reduce Project on that composition, then save the project under another name, prior to importing it into the second project.

How do I maintain spreads after moving pages from one file to another?

I'm consolidating several book chapters into one Indesign file, by way of clicking on the thumbnails on the Pages panel and selecting 'Move Pages...' from the contextual menu.
The problem I'm having is that I can't maintain the page flow between chapters on the destination file, resulting in a broken spread between chapters when exporting to PDF. Here's a screenshot to better illustrate the problem, here seen in between pages 18-19:
I've tried turning on and off the following options on both the source and destination documents but nothing changes:
- Allow Selected Spread To Shuffle
- Allow Document Pages To Shuffle
I've also removed all the sections from the destination document (as you can see on the screenshot, page 19 does not have the little black arrow which denotes a new section), with no luck either.
I also tried dragging the thumbnails manually but to no avail; I just can't figure out how to keep the page spreads between chapters together.
Can anyone help me with this?
Thanks in advance
Mariano

Thank you so much for your reply Peter
I have no idea what those brackets meant, I've followed your recommendation and my problem is fixed now.
Kind regards
Mariano

Moving clips from one project to another

having clicked 'import' and selecting a project to import i get a 'parse' error. I've no idea what this is or what to do about it. Any help greatly appreiciated
chris

Here is one option to copy the whole "flattened" iMovie timeline to another project:
You can use the Timeline Movie.mov as an input for another iMovie project:
- Copy the Timeline Movie.mov outside the iMovie project package.
- Then open the copied Timeline Movie.mov in QuickTime Player Pro and enable ONLY the High Quality flag (otherwise the input will be deinterlaced!): In QT 7 you do this via enabling "Window/Show Movie Properties/Video Track/Visual Settings/High Quality" setting -- do not enable "Single Field" or "Deinterlace" because they deinterlace playback. You can also set "QuickTime Player 7/Preferences.../General/Use high quality video setting when available" to check the "High Quality" box by default (notice that the "Single Field" or "Deinterlace" boxes may have been saved to the file so sometimes you must take care to uncheck them).
- Then import the copied and High Quality -flagged Timeline Movie.mov to iMovie via its File/Import... command.
The import process may take a while if the project is long. Notice that the import is one big clip and you have to manually split it into scenes.

Moving images from one library to another; or how to have 2 libraries open at the same time in Aperture 2

This may be something easy but for some reason I am having a hard time figuring this out. Basically this is the situation: I have a library on my MBP hd that I import pictures to when I am not hooked up to my external hd for the time being. The main library is of course on the external 2tb drive. How do I have 2 libraries open so that I can essentially drag and drop the pictures from one library to another? It would basically be like moving files from one project to another. Thanks for any help!

Always keep a backup of your original images, before you delete them. I make a backup right form the card, before I even import them to Aperture.
How are your images stored right now? Are the referenced or managed? On your big volume I'd consolidate the newly imported images, to be sure they are really inside the Aperture library before I delete any images outside the library.
but they have the little yellow triangle caution symbol on them and I can see them but not really edit them
That is a very typical problem, when you imported your images as referenced images then somehow delete or move the original master image files, that are stored outside the Aperture library.
Do you still have the original masters of the images with the yellow triangle that you cannot edit? In Aperture 3 you can point Aperture to the location of the master image file "File >Locate referenced image" - probably Aperture 2 has a similar command to let you reconnect your masters, if you still have them. Look into the manual.

Moving pages from one project to another??

Similar Messages

Maybe you are looking for