Moving Photoshop from one system to another

MY OLD PC BROKE  IM TRYING TO DOWNLOAD PHOTOSHOP CS5 TO MY NEW SYSTEM FROM OLD HARD
DRIVE CAN I TRANSFER THE INFO TO MY NEW SYSTEM SOMEHOW

It's probably best if you use the original installation media or download cs5 from your adobe account as there are so many files that get installed
besides what goes in the program files.
If you don't have a copy of cs5 you can get it from here, but read the instructions at the top of the page first.
http://prodesigntools.com/tag/ddl

Similar Messages

  • Moving photoshop from one computer to another

    i am moving Photoshop - creative design suite 5.5 from one computer to another.  It has already been uninstalled from this computer.  the install program is asking the upgrade code.  the challenge code will be told when someone answers.

    You have not explained your issue very clearly.  What problem are you having installing CS5.5 on another machine? 
    If CS5.5 was an upgrade from a previous version you purchased you will need the serial number for the previous version in order to confirm that the upgrade is valid.

  • [SOLVED] moving Grub2 from one system to another one

    Hello,
    I am dual booting Ubuntu 11.10 and Archlinux with Grub2.
    Until now, Grub2 is set up on my Ubuntu, and I want to move the boot app to Archlinux.
    My plan was this one:
    - Install and configure Grub2 on Arch, as it is not installed yet.
    -Uninstall from Ubuntu.
    I need advices, as I wonder a few things and doesn't want to be in the case I can no more boot.
    If I set up Grub2 on Arch, when rebooting my BIOS will deal with 2 Grub, correct? How to deal with it, as I am not sure this confusion is a good idea. In this case, can I disabled the Ubuntu Grub when I am on Arch with deleting /etc/default/grub file or even /boot/grub directory, in order to "break" Unbuntu Grub? This seems a dirty solution.
    Or shall I first uninsatll properly Grub2 from Ubuntu? But in this case, when I reboot, I guess I will be in trouble.
    TY in adavnce for any clean solution, or any good pointer.
    Last edited by gabx (2012-05-09 08:01:31)

    @gabx When you run something like grub-install /dev/sda in Arch, you write into the MBR to use Arch's GRUB, not Ubuntu's. Likewise, running grub-install /dev/sda in Ubuntu will write into the MBR to use Ubuntu's GRUB.
    So, saying you installed GRUB to the MBR in Arch. Arch's GRUB loads up, and then given that the Ubuntu entry is set-up correctly, it will load up Ubuntu no problem.
    I would leave GRUB there in Ubuntu, just incase you might want to re-install it, although with my current set-up, I have Arch which GRUB installed and Ubuntu with no GRUB at all (I used the alternate CD to achieve this).
    I have no idea about UEFI, or GRUB2 mainly because I find GRUB2 to easy to screw up.

  • Moving Image from one Review to Another?

    I attempted to upload an image (open in Photoshop) to a specific review. However, I could not see the desired review in the Photoshop CS Review panel. Out of frustration - after attempting to "find" the desired review for several minutes - I uploaded the image to another review and then went online, using Safari, to Acrobat.com.
    There is no visible means of moving an image from one review to another. There is a way of dragging one review (with all sub-images) to another location. But I can't see a way of moving a sub-image from one review to another review.
    IF there is some "magic" that someone knows I would sure appreciate some education.

    This works quite well for a single image review. I've moved them from one workspace to another. The issue is when a review has multiple images and you want to take only one of them from that review and move it to another review in another workspace; I can't seem to get that to work at all.
    When I open a review and navigate to the desired image, then click in the lower left corner and select a new workspace to move the image to, it moves the entire review - not the single image - to the new workspace.
    I guess I could delete the "part" from the workspace it currently exists in and then create it as a stand alone review, but then I won't be able to imbed it into another review as I want to do.
    The source frustration here is that I can't get CS Review in CSPS5 to navigate to the desired workspace/review. I get "ALL REVIEWS" displayed but not the workspaces... Any ideas on how to display workspaces instead of reviews?

  • How do i move my photoshop from one computer to another on windows 7

    how do i move my photoshop from one computer to another on windows 7

    You don't move anything, you install from scratch. Just make sure to run Help --> Deactivate on teh old system.
    Mylenium

  • How can I script moving paths from one file to another?

    Hello. I have 1 image with various color correction layers. The other is the exact same size but only contains paths. How can I script moving paths from one file to another? Thanks, in advance, for any help you can offer. Thanks!

    Thanks! This one actually worked for me. Thanks for your help.
    http://forums.adobe.com/message/3305389#3305389

  • How  to transfer data from one system to another by datamart please give de

    how  to transfer data from one system to another by datamart please give details

    Hi Deba,
    Find the below SAP help doc which may help u...
    http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/frameset.htm
    Also find the below threads...
    Loading data from one cube to another cube.
    data copy from infocube to infocube in two different BW systems
    Delta when loading from ODS to ODS
    reg datamart
    Data mart flag
    Regards,
    KK.

  • Moving images from one library to another; or how to have 2 libraries open at the same time in Aperture 2

    This may be something easy but for some reason I am having a hard time figuring this out. Basically this is the situation: I have a library on my MBP hd that I import pictures to when I am not hooked up to my external hd for the time being. The main library is of course on the external 2tb drive. How do I have 2 libraries open so that I can essentially drag and drop the pictures from one library to another? It would basically be like moving files from one project to another. Thanks for any help!

    Always keep a backup of your original images, before you delete them. I make a backup right form the card, before I even import them to Aperture.
    How are your images stored right now? Are the referenced or managed? On your big volume I'd consolidate the newly imported images, to be sure they are really inside the Aperture library before I delete any images outside the library.
    but they have the little yellow triangle caution symbol on them and I can see them but not really edit them
    That is a very typical problem, when you imported your images as referenced images then somehow delete or move the original master image files, that are stored outside the Aperture library.
    Do you still have the original masters of the images with the yellow triangle that you cannot edit? In Aperture 3 you can point Aperture to the location of the master image file "File >Locate referenced image" - probably Aperture 2 has a similar command to let you reconnect your masters, if you still have them. Look into the manual.

  • Moving object from one client to another using transport requests...

    Hi,
    If we want to move one object from one client to another, we go to se09 and release it. I know this. But after release what are the next steps to move it from one system to another ?
    Regards,
    Rajesh

    Hello Rajesh
    If the two systems share a <u>common</u> transport directory then you can simply go to transaction <b>STMS</b>, double-click on the <b>import queue</b> (target system), then choose menu <b>Extras -> Other Requests -> Add.</b>
    The transport request will be added to the import buffer. Next you can import the request.
    If the two systems do not share a common transport directory you can use RFC-enabled function module <b>EPS_FTP_PUT</b> to copy the data and cofile from the source to the target system (check for <b>DIR_TRANS</b> directories using transaction AL11).
    Regards
      Uwe

  • Moving Stack from one folder to another?

    Is there a way to keep a stack together while moving it from one folder to another. When I grab the stack and drop it to a folder, I view the folder and the images are no longer in a stack. It would save me a lot of time if they would stay stacked. Am I missing something?
    Thank you.

    Well your code is unreadable because you didn't post it properly, but I'd guess you've fallen into the old multiple-delete trap in a new way. It's like this:
    To start with you have messages numbered 0, 1, and 2, let's say. So you write a loop that lets i run from 0 to 2 and delete message number i in the loop. What really happens? The first time through the loop you delete message number 0, after which you are left with messages numbered 0 and 1. The second time through the loop you delete message number 1, after which you are left with message 0 only. The third time through the loop you delete message 2, which isn't there and you get that message.
    That's just a guess, I didn't have the patience to read that ugly unformatted code. There are two ways to do the multiple delete properly, if that's actually your problem: (1) run the loop upwards from 0 and always delete message 0; (2) run the loop downwards from N-1 to 0 and delete message i.

  • Moving personalization from one instance to another.

    Hi All,
    Could anyone guide me with the steps of moving personalizations from one istance to another..
    I tried this syntax..
    FNDLOAD <userid>/<password> 0 Y DOWNLOAD $FND_TOP/patch/115/import/affrmcus.lct <filename.ldt> FND_FORM_CUSTOM_RULES form_name=<form name>
    what could be the filename.ldt location,
    should i execute this from putty on unix box...
    Regards, Ashish
    Edited by: Ashish on Aug 30, 2010 9:59 AM

    Ashish,
    I am followin that document, but it does not tell me where do i execute the script.. Please if you could..Run the command on the server as applmgr user and after sourcing the application env file. You can run the command anywhere provided that the directory is writable by applmgr user.
    Thanks,
    Hussein

  • Moving Itunes From one computer to another

    HI,
    Can anyone offer advice for moving Itunes from one laptop to another? The original laptop that has my itunes on it, has broke, it froze and will not operate. Rather that lose all my purchased music and playlists i would like to swap it to another laptop. Can anyone advise if this will be possible and how to do it? Both laptops have windows XP installed
    thanks
    Arlene

    Hi
    I am having a similar problem- when I record from Itunes to a cd it only works in "Data cd" format in the advanced tab. That's okay, but when I re-insert the cd and try to import it, it doesn't show anything- it plays in Itunes okay. There aren't any little boxes to check for selecting any songs and if I try to use the import function, it shows as blank.(file type shows as .txt) I am using Itunes 6- would Itunes 7 help this?
    thanks- I have a lot of music to transfer and this is a problem.
    Max

  • Moving tabs from one window to another makes the new window vanish. I have hot corners enabled so when I move up to the right corner of my display I can see all my open windows but when I click on the tab that I moved to make it its own window it vanishes

    Moving tabs from one window to another makes the new window vanish. I have hot corners enabled so when I move up to the right corner of my display I can see all my open windows but when I click on the tab that I moved to make it its own window it vanishes

    I came up with an alternative solution.
    Instead of actually trying to move the JInternalFrame from one JDesktopPane to another, I added a single, maximized JInternalFrame to the left side. When one of the right side frames is to be docked, I merely copy its ContentPane to the single JInternalFrame on the left, set the original to be non-visible, and adjust the properties of the JSplitPane to make the "docked" frame appear.
    When the "close" button on the docked frame is pressed, I simply undo this procedure to "undock" the frame and redisplay it on the right-hand side (with its content intact from the docked frame, but in its original position).

  • Getting error in file transfer from one system to another system

    Hi All
    One of my client (User) wants to transfer his file from  SAP R/3 System SAP XI system. He is using a customize t-code ZFIR0325 (Trial balance report transfer to Hyperian System). When user execute the  program he is getting error "File Transfer Failed due to Network chk with Admin"
    I checked with Network team but they said it is okay from their side. We also check for authorization but there is no issue regarding authorization.
    Name of File Path of Aplication Server, XI destinaion and XI directory entered by user is correct.
    We also put authorization trace in XI System to RFC User (In file transfer from one system to another system this RFC User is geeing Used) but no authorization issue was found.
    Please help me to resolve this problem. I any detail require I will provide the same.

    Guruprasad Wrote:
    He is using a customize t-code ZFIR0325 (Trial balance report transfer to Hyperian System).
    We also put authorization trace in XI System to RFC User (In file transfer from one system to another system this RFC User is geeing Used) but no authorization issue was found.
    Firstly, no one in the community can answer on how a custom transcation code and a program associated with it behaves.
    If there are no authorization issues in the system, you have to look at the exact error message. Look if your XI system is allowed to receive files from the SAP system.
    Unfortunately, you should do some more home work before putting your question here. If everything is fine and configured correctly, then the issue might be with the program.
    Regards,
    Raghu

  • IDOC from One System to another

    Hi All,
    I am sending idocs from one system to another For Eg System A to System B .
    Now suppose 2 idocs are generated 1 and 2.
    Now how to determine , for idoc 1 in system A, what is the corresponding Inbound Idoc in System B because the data which is coming in System B might be different than in System A for the same Idoc?
    Thanks in Advance.

    Hi,
    direction 1 for outbound idoc,
                  2 for inbound idoc,
    goto tcode WE02
    enter direction - 2.
    creation date
    and basic type i.e. idoc type
    double click on an idoc num.
    on L.H.S  u have 'Control REc'  double click on it..
    it contains all the sender details and to what outbound idoc it corressponds to  -> basic type, message type
        -> Partner details like partner num, port, partner type
        -> date & time of creation
        -> and the other details
    Regards,
    Neelima.

Maybe you are looking for