Moving playlists/selections from one drive to another:

Hello all, thanks in advance for your attention.
I need to make some more room on my main music storage drive. I hope to accomplish this by moving some of my less-used songs/playlists to another drive on my pc. I know I could just drag-and-drop the folders in Windows Explorer; HOWEVER, I'd like to know if there is a function in iTunes that would allow you to move a part of your library or individual playlists to another storage location while still being able to view it in your current library.
Thanks a lot!!

You pretty much have to move the entire itunes Media folder:
http://support.apple.com/kb/ht1364
Pay strict attention to step 11.
No way in itunes to just move part of it.
If you move things around partially using Windows Explorer, itunes will lose track of where they are.

Similar Messages

I have over 200 hours of HD video on 5 different TB Thunderbolt GRaid hard drives. I need to reorganize my projects, moving large files from one drive to another. Advice?

I have over 200 hours of HD video on 5 different TB Thunderbolt GRaid hard drives. I need to reorganize my projects, moving large files from one drive to another. Advice?

Do some testing to get your method working right with some less than important footage.
Copy/paste files where you want then.
Use the FCE Reconnect feature to tell FCE where the newly copied files reside.
Make sure the new location and files are working as expected with your Projects.
Delete the original files if no longer required.
Al

Moving RAW files from one drive to another without loosing all your work in Lightroom

I am posting this for two reasons, the first is I have been trying to figure out how to get my raw files off my hard drive & onto my external hardrive for ages, as my laptop is filling up & slowing down with the huge files my new camera captures. I have been researching this & have found it hard to find a clear answer to my particular problem using Windows 7 not a Mac.
After loosing some files in Lightroom when I moved them within Explorer instead of Lightroom, & being unable to figure out how to add a new drive in the Library module in Lightroom to move them to, I wanted to make sure I got it right when I moved the lot of them. I finally figured out a way, it might be round about, but it got it done without any trouble.
This is how I moved my files:
In Windows Explorer I moved one folder which Lightroom uses, from my laptop to the drive I want to store them all on from now on.
Then in Lightroom, under 'Library' (along the top, eg 'File' 'Edit' 'Library' etc) I selected 'Find missing photos' & led Lightroom to the new location. Now my external hd as well as my laptop hd was listed under 'Folders' (on the Left hand side of the screen along with 'Navigator' 'Catalog' 'Folders' etc) in the Library module.
After that it was simple. Just a matter of dragging & dropping from my C drive (laptop)to my G drive (external hd) while in Lightroom; Library module. This way Lightroom keeps track of where the files are stored & nothing is lost.
From now on I will be importing raw files from my camera to my external hd & working on them all from there.
If anyone has a simpler way please share it. I am very new at this & don't profess to be an expert. So any advice would be greatly appreciated
The second reason for this post is that I'd like to know how to make sure that the adjustments made in Lightroom are stored on the external hd as well, incase anything happens to the laptop?
Is exporting the catalogue what I need to do?
Or can I back up the Lightroom adjustments to my external hd somehow?
OR when I moved the raw files did this information move with them?
I understand that my raw files are the original unaltered files & that the changes made in Lightroom are recorded seperately & applied in Lightroom itself..... Well, that's what I think I know about how it all works after a few months of using it, so please forgive me if I'm missing something & I'll be very happy to be enlightened if you'd be so kind
Happy New Year to you all!

All the adjustments are stored in the catalog (not in the file). So you want to back it up, and the external is a good place. In the catalog settings (Edit > Catalog Settings > General) there is an option to set a regular backup schedule, and you'll be asked where you want to put it.
The backup is just a regular copy of the catalog, and you can simply launch Lightroom from that, by double-clicking it.
The image files themselves should also be backed up of course, but that's outside Lightroom.

Moving files from one drive to another

How can I move a batch of files from one drive to another using Bridge CS4?

There are two methods. One involves your operating system and the other uses Bridge.
Using Microsoft (sorry to you Mac users) have Windows Explorer open to the directory containing your files. Click and drag the directory from one drive to another. Conversely if you want to copy just a selection of the files follow this routine.
Create a duplicate named directory in the destination drive. Select the file you wish to move and do so from directory to directory.
In Bridge it is even easier. In Bridge ensure that the Folders sub pane is open and visibile. Just click on the source directory and click and drag it to the destination drive.
Testing on my part (I routinely move up to 30 gigabytes at a time) has demonstrated that Bridge adds a little time to the process depending on the size of the source files. I suspect that this has to do with additional overhead of the program.
To be safe I would recommend that you do use the copy method instead of moving the directory. This is a failsae in case any problems crop up during the process. It takes mere moments to delete the source directory after the copy routine has run.
Wayne Webb

Moving Datafiles from one drive to another

What is the procedure to move datafiles from one drive to another ?
Thanks

Hi,
What is the Database version ?
Anyways check this SAP Note 363018 - File management for SQL Server.
Hope it helps
Regards
KT

Can you move events from one drive to another easily?

I've just bought an external firewire drive to dedicate to my Sony HD camcorder material.
I've only imported 30 mins or so of stuff onto the Mac's internal drive with iMovie '08, and would like to know if anyone's managed to easily copy 'events' from one drive to another to merge/split content.
Is it just a case of copying event folders from the iMovie Events folder to the external drive, but if so do you have to specify a particular path?
Similarly, can you just move the individual 'Projects' or archive to DVD etc as they will invariably take up lots of space for longer footage? Does the projects file just hold references to the assembled clips, in which case moving events would scupper things as I seem to have several movie files in there already though these may just be things I uploaded to .Mac to test out.
This may all be a bit of trial and error. Hopefully clips are only references unlike the pretty huge but self-contained iMovie 6 HD project packages. This also raises issues about how to easily backup all your 'events'.
AC

Observation:
Just imported 15mins of video from the Sony.
When you click import you are asked which drive to save to.
As well as the Mac's internal drive, all my attached USB drives which are formatted as Mac OS Extended (journaled) appear as targets to save to as well as teh Firewire drive.
I selected the Firewire drive and don't recall an option to create a sub-folder. After import a new top level folder of iMovie Events was created, but no others.
Presumably iMovie Projects/Shared folders only exist on the boot drive.
I'm assuming that this structure will allow you to share movie Events between Macs using external drives.
Again, an assumption but I suspect iMovie scans all available suitable hard drives and checks what content is available in top level iMovie Events folders for non-boot drives as well as this folder in the user's Movies folder.
Rambling observations over for now.
AC

Copy File From One Drive to Another & Missing Keyword Tags

Hi,
I use LR 2.7. I want to copy one file from one drive to another drive with the same file name. I thought you could drag the file, but it doesn't copy over the file in the other drive, can you explain what I have to do?
Also, I tried to import the folder into another drive, but it doesn't copy the keyword tags. Is there a way to do this?
Thanks
Barb

Hey Barb,
Well, if you use the Year/Month/Day/pictures_here format, none of the folders contains a massive amount of folders. It's not the number of folders that generates problems, it's having them all in _one_ folder that creates slow-down issues. Imagine if you had a deck of cards; look for one card... you have to go through all 52 cards to find it. But, if you broke it down into the 4 groups, you only have to go through 13, which is lots faster. Now imagine going through 15000 instead of 52...
Look at the way lightroom can automatically import by date; it has several preset formats. If you pick one of those, then when you import new photos, it will automatically create any missing ones, and you have lots less to do.
Depending on how much work you have already done, you might consider making a new catalog and just importing all of your photos again, and let it create everything quickly for you.
You could save all of your "edit" changes by writing out all of the xmp files first. But with 15000 files in one directory, this will double it to 30000 (one per image!), but will preserve all of your edits if you choose to make a new catalog approach.
As for combing catalogs, once you have one catalog the way you want it, you can select "import from catalog" and it will suck it into a new one, thus combining the catalogs. The only problem I can see is that it will import it in the format you already have it, so you have to organize it manually before you import it. Otherwise, you'll get your old format and your new format in the one catalog (but can then move pictures around if you need to).
Personally, I'd go the 'write xmp files, create new catalog' approach. Then just recreate my collections, etc.
But either way you do it, it will take some time processing, as that's a lot of files to start with!
Ciao!
Jason

Best way to copy large VM files from one drive to another?

Hi all, I am wondering what the best and fastest way there is to copy a large VM file from one drive to another (external drive to internal drive). Should the .pvm folder (in my case with Parallels) be zipped first? The files I need to copy range from 50 to 70gb. thx for any insight! ps. Even Bombich admits it's difficult for CCC to do...not clear why, but it does slow a full clone down to a crawl. I also have Chronosync at my disposal, but suspect the same is true there as well. Cheers!
coocoo

I don't think it matters much which way you do the job. I use Parallels to compress by drives on a regular basis. If you want to copy a dynamic VM, which can grow to just about any size as required, to another drive you will use about the same amount of time zipping the VM - transfering the VM - unzipping the VM, as you would just moving the VM.
I've moved my VM files to a second partition that does not get cloned to my bootable backup that I create with SuperDuper. I've excluded my entire VM folder from Time Machine and just make zipped backups for each system after any large Service Pack Updates from Microsoft, or any intricate program installations. These get copied to a second partition on my Time Machine drive manually.
My VM's sizes are kept under control by using common Documents-Movies-Music folders for the Mac and the VM's. My VM's do not have the data files the programs use, they are on my Mac and get backed up every hour with Time Machine.
Reinstalling a VM just means deleting the broken copy, unzipping my latest backup, and putting into the same folder that Parallels knows to use. The data files are always accessible, even if they were created after my latest VM backup.

Plan to move photos from one drive to another - Need advice

My C: drive is almost out of space. I want to move my photos to a new internal hard drive.
In PSA SE 3, I've already tagged these photos. I want to know what's the easiest way to move my photos from one drive to another without losing my tags. Will "Reconnect Missing Files" find the moved files on a new drive if I keep my path the same (except for the drive letter)? Or will I have to reconnect the files manually one-at-a-time?
Any advice is appreciated!

I might. I think I have MySQL installed at home. I have MS SQL Server at work. Is the application data file Access-compatible? I'd love to be able to just hack the underlying data store.

I bought a new laptop and used Windows Easy Transfer cable and moved all files from one computer to another. I installed iTunes and found my iTunes music Library. However, when I plug in my iPod it says it is already synced with another iTunes Library.

I bought a new laptop and used Windows Easy Transfer cable and moved all files from one computer to another. I installed iTunes and found my iTunes music Library. However, when I plug in my iPod it says it is already synced with another iTunes Library.
I don't see anything in Help that shows when you already have transfered all the files over. Why would it want to erase and sync when I already have all the music folder copied over? I didn't have an issue when I had another technician copy from one laptop to another. Home sharing is also on but not being recognized.

I suspect you only migrated the media folder instead of the complete working library. Either review the transfer process and copy over the entire iTunes folder from your old profile's music folder or see Recovering your iTunes library from your iPod or iOS device.
tt2

Moving multiple queries from one category to another in QM

Hi All,
Is there is any way of moving multiple queries from one category to another in the query manager?
Or is the only way of doing it by saving each one individually into a different category.
Any ideas ?
Regards,
Rakesh N

Hi Rakesh,
The query manager has limited function compare with normal file management applications. Under current design, you have to do this one by one. You just need to make sure move the smaller amount of queries to large category. Category name can be changed easily.
Thanks,
Gordon

Moving CMS database from one server to another

Using the following:
Crystal Enterprise 10, installed on W2K3 Server R2 (not making any changes to this server);
CMS database, installed on W2K Server, SQL Server 2000, SP3
New database server: W2K3 Server R2, SQL Server 2005, SP2
I found what I think are the steps to moving the database from one place to another in the CE10 Administrator's guide (pages 291-300, but I want to make sure there aren't any "gotchas" when moving the database location and/or upgrading the database version. I'm primarily a DBA, so I already know about the Schema security change going from SQL 2000 to SQL 2005.
In a nutshell, here's my plan:
1. Take fresh backup of the existing CMS database
2. Stop Crystal Management Server
3. Click "Specify CMS Data Source" on the toolbar.
4. ETC--following the steps in the admin guide
If anyone has done this and has run into any problems (what I'm expecting) or had it go smoothly (I would be surprised), please let me know what to expect.
Thanks!

All you really need to do is stop the crystal services.
Backup the CMS and Auditing database
Detach the CMS and Auditing database
Copy CMS and Auditing databases to new DB server
Attach the CMS and Auditing databases
Set the compatibility mode
On the servers/s that host the CMS service, modify the ODBC connections to point to the new database server
Start the CMS service, fire up the Crystal services.
One thing to note, I don't think SQL 2005 is a supported platform for CE10 - this doesn't mean it won't work and since the support lifecycle for the product is long gone it doesn't really make much difference however you may want to run some thorough testing prior to the move.
Edited by: James Pretorius (CCLTD) on Aug 5, 2009 9:20 PM

Itunes Playlist Transfer From One Computer to another

i followed the support instructions for transferring itunes playlist from one computer to another but when i did it it created one massive playlist is there any way to transfer your itunes playlists to another computer so i dont have to remake all my playlist again im a dj and its kinda hard to to dj looking through over 30k plus songs searching for one after another.... please help someone.... thank you

Copy \Music\iTunes\iTunes library.xml file to the desktop on the new computer.
Open iTunes on the new computer then File > Library > Import playlist and select the iTunes library.xml you copied.

When moving a page from one pdf to another I see a message "consolidating fonts" and the added page does not view properly

I am working with multiple PDF files in Acrobat Pro XI. Sometimes when I move a page from one PDF to another it does not view properly. It was fine in the source PDF, but not when moved to the desired PDF. I also see a message momentarily across the bottom of my screen that says "consolidating fonts". What must I do to fix this?

Lloyd ,
Follow these steps for Acrobat 11 .
Launch Acrobat>Tools>Print Production>Acrobat Distiller
Now in Acrobat Distiller follow these.
Select Standard in Default settings.
Go to Settings and select Edit Adobe PDF Settings.
Select Fonts and in the font source window select the fonts you want to Add.
Click Save As and then OK.
See if this helps.
Regards
Sukrit Dhingra

Moving a method from one class to another issues

Hi, im new. Let me explain what i am trying to achieve. I am basically trying to move a method from one class to another in order to refactor the code. However every time i do, the program stops working and i am struggling. I have literally tried 30 times these last two days. Can some one help please? If shown once i should be ok, i pick up quickly.
Help would seriously be appreciated.
Class trying to move from, given that this is an extraction:
class GACanvas extends Panel implements ActionListener, Runnable {
private WorldMenuItems speedMenuItems, designMenuItemsPlantGrowth, designMenuItemsPlantCount;
     private WorldMenuItems designMenuItemsPlantEaten, designMenuItemsApproximatePopulation;
     private WorldMenuItems designMenuItemsEatersBorn,designMenuItemsMutationProbability;
     private WorldMenuItems designMenuItemsCrossoverProbability;
MenuBar getMenuBar() {
          menuBar = new MenuBar();
          addControlItemsToMenuBar();
          addSpeedItemsToMenuBar();
          addWorldDesignItemsToMenuBar();
          return menuBar;
This is the method i am trying to move (below)
public void itemsInsideWorldDesignMenu() {
          designMenuItemsPlantGrowth = new WorldMenuItems("Plants Grow",
                    new String[] { "In Rows", "In Clumps", "At Random",
                              "Along the Bottom", "Along the Edges" }, 1);
          designMenuItemsPlantCount = new WorldMenuItems("Number Of Plants",
                    new String[] { "50", "100", "150", "250", "500" }, 3);
          designMenuItemsPlantEaten = new WorldMenuItems("When a Plant is Eaten",
                    new String[] { "It grows back somewhere",
                              "It grows back nearby", "It's Gone" }, 0);
          designMenuItemsApproximatePopulation = new WorldMenuItems(
                    "Approximate Population", new String[] { "10", "20", "25",
                              "30", "40", "50", "75", "100" }, 2);
          designMenuItemsEatersBorn = new WorldMenuItems("Eaters are Born",
                    new String[] { "At the Center", "In a Corner",
                              "At Random Location", "At Parent's Location" }, 2);
          designMenuItemsMutationProbability = new WorldMenuItems(
                    "Mutation Probability", new String[] { "Zero", "0.25%", "0.5%",
                              "1%", "2%", "3%", "5%", "10%" }, 3);
          designMenuItemsCrossoverProbability = new WorldMenuItems(
                    "Crossover Probability", new String[] { "Zero", "10%", "25%",
                              "50%", "75%", "100%" }, 4);
Class Trying to move to:
class WorldMenuItems extends Menu implements ItemListener {
   private CheckboxMenuItem[] items;
   private int selectedIndex = -1;
   WorldMenuItems(String menuName, String[] itemNames) {
      this(menuName, itemNames, -1);
   WorldMenuItems(String menuName, String[] itemNames, int selected) {
      super(menuName);
      items = new CheckboxMenuItem[itemNames.length];
      for (int i = 0; i < itemNames.length; i++) {
         items[i] = new CheckboxMenuItem(itemNames);
add(items[i]);
items[i].addItemListener(this);
selectedIndex = selected;
if (selectedIndex < 0 || selectedIndex >= items.length)
selectedIndex = 1;
items[selectedIndex].setState(true);
     public int getSelectedIndex() {
          return selectedIndex;
public void itemStateChanged(ItemEvent evt) { // This works on other systems
CheckboxMenuItem newSelection = (CheckboxMenuItem)evt.getSource();
for (int i = 0; i < items.length; i++) {
if (newSelection == items[i]) {
items[selectedIndex].setState(false);
selectedIndex = i;
newSelection.setState(true);
return;

Ok i've done this. I am getting an error on the line specified. Can someone help me out and tell me what i need to do?
GACanvas
//IM GETTING AN ERROR ON THIS LINE UNDER NAME, SAYING IT IS NOT VISIBLE
WorldMenuItems worldmenuitems = new WorldMenuItems(name, null);
public MenuBar getMenuBar() {
          menuBar = new MenuBar();
          addControlItemsToMenuBar();
          addSpeedItemsToMenuBar();
          worldmenuitems.addWorldDesignItemsToMenuBar();
          return menuBar;
class WorldMenuItems extends Menu implements ItemListener {
     private WorldMenuItems speedMenuItems, designMenuItemsPlantGrowth, designMenuItemsPlantCount;
     private WorldMenuItems designMenuItemsPlantEaten, designMenuItemsApproximatePopulation;
     private WorldMenuItems designMenuItemsEatersBorn,designMenuItemsMutationProbability;
     private WorldMenuItems designMenuItemsCrossoverProbability;
     GACanvas gacanvas = new GACanvas(null);
   private CheckboxMenuItem[] items;
   private int selectedIndex = -1;
   WorldMenuItems(String menuName, String[] itemNames) {
      this(menuName, itemNames, -1);
   WorldMenuItems(String menuName, String[] itemNames, int selected) {
      super(menuName);
      items = new CheckboxMenuItem[itemNames.length];
      for (int i = 0; i < itemNames.length; i++) {
         items[i] = new CheckboxMenuItem(itemNames);
add(items[i]);
items[i].addItemListener(this);
selectedIndex = selected;
if (selectedIndex < 0 || selectedIndex >= items.length)
selectedIndex = 1;
items[selectedIndex].setState(true);
     public int getSelectedIndex() {
          return selectedIndex;
public void itemStateChanged(ItemEvent evt) { // This works on other systems
CheckboxMenuItem newSelection = (CheckboxMenuItem)evt.getSource();
for (int i = 0; i < items.length; i++) {
if (newSelection == items[i]) {
items[selectedIndex].setState(false);
selectedIndex = i;
newSelection.setState(true);
return;
public void itemsInsideWorldDesignMenu() {
     designMenuItemsPlantGrowth = new WorldMenuItems("Plants Grow",
               new String[] { "In Rows", "In Clumps", "At Random",
                         "Along the Bottom", "Along the Edges" }, 1);
     designMenuItemsPlantCount = new WorldMenuItems("Number Of Plants",
               new String[] { "50", "100", "150", "250", "500" }, 3);
     designMenuItemsPlantEaten = new WorldMenuItems("When a Plant is Eaten",
               new String[] { "It grows back somewhere",
                         "It grows back nearby", "It's Gone" }, 0);
     designMenuItemsApproximatePopulation = new WorldMenuItems(
               "Approximate Population", new String[] { "10", "20", "25",
                         "30", "40", "50", "75", "100" }, 2);
     designMenuItemsEatersBorn = new WorldMenuItems("Eaters are Born",
               new String[] { "At the Center", "In a Corner",
                         "At Random Location", "At Parent's Location" }, 2);
     designMenuItemsMutationProbability = new WorldMenuItems(
               "Mutation Probability", new String[] { "Zero", "0.25%", "0.5%",
                         "1%", "2%", "3%", "5%", "10%" }, 3);
     designMenuItemsCrossoverProbability = new WorldMenuItems(
               "Crossover Probability", new String[] { "Zero", "10%", "25%",
                         "50%", "75%", "100%" }, 4);
public void addWorldDesignItemsToMenuBar() {
     gacanvas = new GACanvas(null);
     itemsInsideWorldDesignMenu();
     Menu designMenuItems = new Menu("WorldDesign");
     designMenuItems.add(designMenuItemsPlantGrowth);
     designMenuItems.add(designMenuItemsPlantCount);
     designMenuItems.add(designMenuItemsPlantEaten);
     designMenuItems.add(designMenuItemsApproximatePopulation);
     designMenuItems.add(designMenuItemsEatersBorn);
     designMenuItems.add(designMenuItemsMutationProbability);
     designMenuItems.add(designMenuItemsCrossoverProbability);
     gacanvas.menuBar.add(designMenuItems);

Moving playlists/selections from one drive to another:

Similar Messages

Maybe you are looking for