Moving production server one data center to other

Hi all,
Actually we have one Production server all the scenarios are working fine, now we want to creat one new server in another data center and replace the old production server(transfer all the scenarios) .what are the roles(for PI Consultant) involved in this case .
Please advise me.
Thanks in advance.

Build a transport in DEV for all your objects and get basis to apply them and activate the changes in PROD. You shouldnt need more than monitoring access in any production system except in error situations.

Similar Messages

What is the best approach to migrate SharePoint farm from one data center to other datacenter

We have two web front server and one application server and two instances for database server and we have to migrate complete farm from one data center to other data center with minimal downtime and end user impact.
Please provide your best input on this.
Thanks in advance.

Create a new farm in the secondary Data Center at the same patch level with the desired configuration. Replicate the databases using the method of choice (Mirroring, AlwaysOn, etc.). Create a downtime window where you can then attach the databases to the
new farm's Web Application(s)/Service Application(s).
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

BI4 server Migration one Data Center to other

Hi All,
We are currenlty Planing to move the BI4 Server along with SQL DB, Can you please let me know if any best practices to move the server Location.
Regards,
Santhosh

Hi Denis,
We have an issue in the below step :
"create new SIA pointing to CMS DB which was moved from old server.
start it."
After we do this and open CMC
we could all the services like CMS, I/p & O/P respositories, Adattive processing server etc pointing to the actual(old) BI4 servers instead of new servers
After this if you login to the any one of the server we can able see all the nodes in new and old servers.
Any idea on what the issue would be ?
Regards,
Santhosh

Is there a way other than redeployment to migrate existing Cloud Services from one data center to another?

We have a need to correct affinity of Cloud Service, Azure DB, Storage and Mobile Services such that they are on a singl datacenter and do not get impacted by network latency when these components communicate with each other. Also to distribute various environments
across different data centers we need to realign some environments to mitigate all environments getting impacted if there is outage.
Existing Cloud Services and related Service Bus queues and topics need to be moved to a different datacenter. Is there a way to do this without having to redeploy cloud services (web and worker roles) or recreate the service bus entities (queues and topics)?
Also, the existing Cloud Service URL need to be retained without with user authentication won't be possible and hence when completed, the new cloud service should have the same URL.
Please provide best available options for achieving this or ask question if more information is needed.

Hi sumeetd,
As far as I know, currently there is no directly way to move services from one data center to another unless redeployment. You could submit a feature suggestion via this page (http://feedback.azure.com/forums/34192--general-feedback
). And at the same time,you could contact with azure support team via the channel below:
http://www.windowsazure.com/en-us/support/contact/
Any questions, please feel free to let me know.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

After installing Windows Server 2008 DATA CENTER stuck on blank screen and command prompt window

After a new fresh install of Windows Server 2008 Data Center I get this solid blue screen with a comand prompt window showing (user\Administrator) I have limited use of the commands, am able to bring up the task manager by CTL Del and perform limited functions. I was able to run the same software on this machine before, nothing has changed. The way I ran the software on it before was from an image I deployed to it,(not from a fresh install). The old image timed out and I could not rearm it, that is why I did a fresh install. I tried to use gpedit.msc but the command did not work.

You may be using Windows with limited functionality as the previous version expired. Did you re-format the drive/partition before you did the "fresh" install if not Windows probably kept the old install information so knew that it was expired previously. Either activate Windows (try typing slui.exe and filling in the product key and activate - then restart the machine) or re-format the drive/partition that Windows is on and re-install Windows again.

Windows server 2012 Data Center with VDI configuration error message ( The remote session was disconnected because there are no remote desktop license servers available)

Dears,
I have two windows server 2012 Data Center and I configured (Virtual Desktop Interface)VDI on it's.
All my clients connected on both of servers by used Remote Desktop sessions ,5 months since.
Currently,when the clients is connected on the both of servers they received the following error:
"The remote session was disconnected because there are no remote desktop license servers available to provide license"
Kindly note, I installed windows Licenses Server Data Center on the both of servers.
Regards.

Hi,
Please let us know if you have purchased RDS CALs and install it in your RD licensing server.
Also, on RD Session host servers, please make sure that you have specified the license mode and point them to the RD licensing server.
Remote Desktop Services Client Access Licenses (RDS CALs)
http://technet.microsoft.com/en-us/library/cc753650.aspx
RD Licensing Configuration on Windows Server 2012
http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx
Hope this helps.
Jeremy Wu
TechNet Community Support

Transfer of Vendor Balance from one profit center to other

Hi All
I need some help regarding Transfer of Vendor Balance from one profit Center to other profit cneter. I am in ECC 6.0 and activated document splitting.
Regards
Venkat

Hi Kamal
You are right. My requirment is to transfer Vendor balance in PC 1000 to PC 2000. If I post using 9KE0 it is not affecting in the respective vendor account. Since we are in ECC 6.0 with document split option we have to post the same transfer entry through any FI transaction only.
Regards
Venkat

Time calculation from one date to some other date

Hello,
I want to time calcualtion from one date to other date period.
for calculating total hr's from one date to other date.plz let me know the logic.
                       Date                      Time
Eq: 1st date:   22.05.2008             01.10.00
      2nd date:   25.05.2008             12.10.00
I want the total hrs from 22.05 to 25.05 like i need result as
from 22 to 25 total hrs based on the time given.

Hello,
Instead of FM..We can achieve by the following program...
REPORT YRT_TEST1.
parameters : date1 like sy-datum,
date2 like sy-datum.
data: days(3) type n.
data: years(10) type p decimals 3.
start-of-selection.
days = date2 - date1.
years = days / 365.
write: / days,
years.
Now Multiply 24 to days to get hours and the multiply with 60*60 to get the seconds
***************Reward points,if found useful

How to use value from one data set in other data set SQL select.

Hello all, i have one data set, and i need to get value from that data set into other data set. Something like '?' but without input. I will try to explain it with screenshots:

If both tables come from the same data source, join the two tables in one data set rather than two as shown. If they are from different data sources, use a 'join data set'

How can I moving photos from one roll to an other

I tried to drag and drop photos from one roll to an other. If the roll has a lot of photos (e.g. 250) I can not scroll down to a roll below. iPhotos does not automatically scroll down when I try to drag them down.
How can I scroll or move these down?
thanks for your input
Baguette

Drag and drop will work, but you have to drag to the roll title. It will turn blue when you can drop the photos. It should scroll when you move to the top or bottom of the window, but sometimes it gets going really fast and is hard to stop where you want it.
An easy way is to close the rolls and make everything as small as possible so the the source and destination rolls are all in the window at the same time. Of course if you have a really big library this might work.

OwnCloud server: Move data dir to other partition, enable ssl

Hi,
I am using apache and subversion with ssl works just fine, everything configured according to the wiki.
I now set up owncloud server and it works fine on port 80. I want to run it on port 443 over SSL, but I do not know what needs to be added to /etc/httpd/conf/extra/owncloud.conf. Additionaly, I would like the owncloud server to be accessed via a subpath, like localhost/owncload instead of the localhost root dir (in order not to conflict it with svn, which is found at localhost/svn).
The second thing which needs to be fixed is that owncloud shall not store the user files in root partition at /usr/share/webapps/owncloud/data, but in another ext4 partition. I tried creating a symlinkto remove the data folder and create a symlink to a folder on another partition (also did chown http:http there), but owncloud complained about missing data directory then. Moving the whole owncloud directory to another partition and adjusting the paths in owncloud.conf failed too (403). Any idea how to fix that?
This is what my owncloud.conf file looks like right now:
<IfModule mod_alias.c>
Alias /owncloud /usr/share/webapps/owncloud
</IfModule>
<Directory /usr/share/webapps/owncloud>
Options FollowSymlinks
Order allow,deny
AllowOverride all
allow from all
php_admin_value open_basedir "/srv/http/:/home/:/tmp/:/usr/share/pear/:/usr/share/webapps/"
</Directory>
<VirtualHost *:80>
ServerAdmin [email protected]
DocumentRoot /usr/share/webapps/owncloud
ServerName owncloud.foo.com
ErrorLog logs/owncloud.foo.info-error_log
CustomLog logs/owncloud.foo.info-access_log common
</VirtualHost>
Thanks for reading and maybe helping.

I would suggest you remove the Include extra/owncloud.conf and instead put the contents of owncloud.conf directly in httpd.conf, it makes managing it easier.
In owncloud.conf there should be a section something like
<IfModule mod_alias.c>
Alias /cloud /usr/share/webapps/owncloud/
</IfModule>
If that's there, mydomain.com/cloud will point to OwnCloud, so you can comment out the entire VirtualHost part. Then it won't take over the root directory but it will still be accessible via /cloud.
You can put configuration options in the Directory /usr/share/webapps/owncloud part.
To use it on a different drive, I *think* you could just copy /usr/share/webapps/owncloud to the other drive and change the directory to the new one wherever it appears in owncloud.conf. I don't have a second drive to test it on, but that should work.
Last edited by subraizada3 (2014-02-18 15:11:09)

Moving stuff from one JList to an other

Hi,
I'm trying to develop a JPanel with two JLists and two arrow JButtons to be able to move (!) stuff from the left JList to the Right and backwards. Both JLists have a ListCellRenderer that extend JLabel.
Managed to do a 'copy' of selected values to the other JList,
eg.
public void addKeyWords(java.awt.event.ActionEvent actionEvent,javax.swing.JList allKeyWords,javax.swing.JList chosenKeyWords) {
java.util.List chosenValues = java.util.Arrays.asList(chosenKeyWords.getSelectedValues());
java.util.List selectedValues = java.util.Arrays.asList(allKeyWords.getSelectedValues());
java.util.Set set = new java.util.HashSet();
set.addAll(selectedValues);
javax.swing.JList l = new javax.swing.JList(set.toArray());
getChosenKeyWordsList().setModel(l.getModel());
return;
but can't figure out how to get stuff to disappear in the first JList when it is moved to the other JList nore how to enable the user to 'add' elements one at a time.
Enyone?

hi.
what i do when i want to remove from the right side list:
//get an array of indexes that needs to be removed.
elements[] removedItems = getStrings(rightListData, selected);
//copy all elements that do NOT need to be removed
rightListData = utils.copyArrayWithoutIndex(rightData, selected);
rightList.setListData(rightListData);
same goes for left side.
basically, i remove all selected elements from the array of rows, and re-set the list data model.
HTH.

Multiple indesign files for product brochure one data merge file

I have multiple indesign files for product brochure and there are price changes for various products.
attached is a screen shot of the folder where all the indesign files are located as you can see each one has been laid out as a spread.
Rather than opening each individual indesign file to amend prices can i quickly? or is there a way of compliling all documents into one file and quickly updating the price with the data merge file.
thanks in advance.

Absolutely not.
(1)     PDF/VT-1 files must also be PDF/X-4 files. The “create PDF via distillation of PostScript” method precludes this since PostScript supports neither live transparency nor color management.
(2)     The efficiencies of PDF/VT-1 require use of Forms XOjects and Image XObjects in the PDF file. That requires direct PDF creation that you get from PDF export. This is not available via any route that uses stink'in PostScript as an intermediary.
(3)     Adobe most strongly endorses PDF creation from InDesign via the export function, not printing to PostScript and distilling. Such PostScript is optimized strictly for printing and not for PDF file creation.
          - Dov

Cannot install SQL Server Native Client 2012 on Windows Server 2008 Data Center

Is it possible to install SQL Server Native Client 11.0 (SQL Server 2012) on Windows Server 2008 Datacenter?
I tried to install it, but I get this error message:
"Installation of this product failed because it is not supported on this operating system. For information on supported configurations, see the product documentation."
Based on this article (http://msdn.microsoft.com/en-us/library/cc280356.aspx), I see one of the supported operating system is Windows Server 2008.

Hello,
Can you try to download and install Windows Server 2008 Service Pack 2 from the following link, and then reinstall the SQL Server Native Client 11.0 again?
http://www.microsoft.com/en-in/download/details.aspx?id=16468
Microsoft SQL Server 2012 Native Client is included in the SQL Server 2012 Feature Pack. Based on the requirement of
the download page , you should apply SP2 for Windows Server 2008.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Moving photos from one album to the other

I have the Iphone 5 using IOS 7.0.4, I want to move photos from one album to another. How can that be done? I have tried everything on the web and nothing works.

user645399 wrote:
Which one among this I should be using, I understand that I need PACKAGE SPEC to get the Package's Spec but to get the body, should I be just using the BODY clause? Whats PACKAGE is all about?
SELECT dbms_metadata.get_ddl('PACKAGE','package_1')
FROM dual;
SELECT dbms_metadata.get_ddl('PACKAGE_SPEC','package_1')
FROM dual;
SELECT dbms_metadata.get_ddl('PACKAGE_BODY','package_1')
FROM dual;
By using just PACKAGE type, you can get both spec and body
Check the following link to get the list of all object types that are used in DBMS_METADATA.GET_DDL :
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_metada.htm#BGBIEDIA
Kamran Agayev A.
Oracle ACE
My Oracle Video Tutorials - http://kamranagayev.wordpress.com/oracle-video-tutorials/

Moving production server one data center to other

Similar Messages

Maybe you are looking for